Hey!
I have a question, the G901F is kind of not supported at all and i thought of trying to port the 18.1 base of the normal Galaxy S5 G900F to the 16.0 base of the Galaxy S5+ G901F.
sadly i dont know how to do it...
[guide][how to port roms][snapdragon][windows/linux]
HOW TO PORT ROMS IN WINDOWS WARNING :- I AM NOT RESPONSIBLE FOR BRICKED DEVICES, DEAD SD CARDS OR ANY OTHER STUFFS HAPPEN WITH YOU. WARNING:- THIS IS FOR SNAPDRAGON DEVICES ONLY. YOU NEED A WORKING A PC AND SOME SOFTWARES LIKE:- WINRAR...
forum.xda-developers.com
following this one but theres no boot.img-zImage and boot.img-dtb when i try it
Related
Hi everybody,
I am new to this forum, so I introduce myself a bit:
I am the owner of a Samsung Galaxy J5 (2015) J500F, bought in India.
running Android 6.0.1 from last official update.
I am a long time linux developer, (more than 20 years), but I have not a lot of experience on android dev,
I have already compiled some kernels for my old wiko phone, and test them successfully...
On my Galaxy J5, I already installed TWRP for 6.0.1, and supersu via TWRP to root it..
my Goal , is to port some of Nethunter kernel patches,
mainly android usb hid keyboard patch ( github.com/pelya/android-keyboard-gadget )
and wifi injection patches also.. this is the basic need for a Nehunter port.. with some kernel .config mods also..
There is already a Galaxy A5 port in Nethunter Github, and it should not be too hard to port nethunter to Galaxy J5 I Think..
Sorry for this lengthy introduction,
So my question is....
From which source code do I have to start to compile a stock kernel for android 6.0.1 for Galaxy J5 (J500F) ?
I found the Nick Verse Repository: github.com/DJSteve/kernel_j500fn_djsteve
thereis also: github.com/Galaxy-J5/samsung_j5_kernel-mm.git (kernel for CyanogenMod 13.0 I think)
ans also: github.com/Galaxy-J5/kernel_samsung_j5lte (kernel for CyanogenMod 12.1 I think)
and other ones laying around.. (MSM8916 samsung released ?? )
so from which kernel source code do I have to start, to build an android 6.0.1 stock kernel for a J500F ????
I want to start from an unmodified kernel, then add each patch one by one, test them, to validate each steps...
I hope some one will have some time to help me
Hello, many like me would like to install the roms of the Model G530H for our G531H, ie those of the section of "Android Development" Roms like J5 Nameless, Rom Fortunax, Rom S7, Rom Prime among others. Look at the pictures. For our device there are only Roms of Pure Android, why is not there?
:good:
The reason is: it far more easier to Port open source ROMs like Lineage OS , Ressurection remix etc. Than porting oem specific like ROMs from j5, s7 or other samsung phones. We need a contributor with good knowledge to do that. FYI only the j5 and s6 ROMs for g530 is a proper Port , others are just modded ROMs basses on j5 rom or stock rom. The s7 rom is basically j5 ROM but the s7 mod/rom for j5 flashed on the rom (got what I mean) and the s6 ROM is discontinued and has no wifi support and also the j5 ROM isn't properly optimized with the j5 namless being a slightly optimized version of the same ROM by a different person.
Hi Guys,
Hoping someone can lend some assistance here:
I have a Samsung J5 SM-G570M and i was trying to flash Lineage OS 16 from:
msm8916 - because im a new user i cant post the link but its basically this :
LineageOS 16.0 for the Samsung Galaxy J5 (SM-J500F)
Info:
Unified codename: j5lte
Other codenames: j5ltexx / j5ylte / j5lteub / j5ltedx
Supported models: SM-J500F / SM-J500Y / SM-J500M / SM-J500G
However TWRP keeps giving me the error
E3004: This package is for device j5nlte,j5nltexx; this device is onxe5lte.
Any suggestions i Did previously flash Space OS to the phone and ran great. Someone said it could be the version of TWRP is wrong, does that carry any merit ?
1. Why does it say my ph is onx5elte when in settings the model is SM-G570M ?
2. I previously flashed space OS to my phone link from XDA Forums and it worked fine, it was the same J500M why wont this one work ?
3. In the lineage-16.0-j9-20191227-NIGHTLY-j5lte\META-INF\com\android folder there is a file called metadata:
Which has the following line
"pre-device=j5lte,j5ltechn,j5ltedx,j5ltedo,j5ltekx,j5lteub,j5ltexx,j5ltezt,j5ylte" and "post-build=samsung/lineage_j5lte/j5lte:9/PQ3A.190801.002/9:userdebug/test-keys"
If i change these to match my phone will it work ????
i googled the models J5 SM-J500M vs J5 Prime SM-G570M and with the exception of memoory size and processor it isnt much difference.
Can anyone help me to get Lineage on my phone i really need to get it running again.
thanks for the help in advance.
R0bert0r said:
Hi Guys,
Hoping someone can lend some assistance here:
I have a Samsung J5 SM-G570M and i was trying to flash Lineage OS 16 from:
msm8916 - because im a new user i cant post the link but its basically this :
LineageOS 16.0 for the Samsung Galaxy J5 (SM-J500F)
Info:
Unified codename: j5lte
Other codenames: j5ltexx / j5ylte / j5lteub / j5ltedx
Supported models: SM-J500F / SM-J500Y / SM-J500M / SM-J500G
However TWRP keeps giving me the error
E3004: This package is for device j5nlte,j5nltexx; this device is onxe5lte.
Any suggestions i Did previously flash Space OS to the phone and ran great. Someone said it could be the version of TWRP is wrong, does that carry any merit ?
1. Why does it say my ph is onx5elte when in settings the model is SM-G570M ?
2. I previously flashed space OS to my phone link from XDA Forums and it worked fine, it was the same J500M why wont this one work ?
3. In the lineage-16.0-j9-20191227-NIGHTLY-j5lte\META-INF\com\android folder there is a file called metadata:
Which has the following line
"pre-device=j5lte,j5ltechn,j5ltedx,j5ltedo,j5ltekx,j5lteub,j5ltexx,j5ltezt,j5ylte" and "post-build=samsung/lineage_j5lte/j5lte:9/PQ3A.190801.002/9:userdebug/test-keys"
If i change these to match my phone will it work ????
i googled the models J5 SM-J500M vs J5 Prime SM-G570M and with the exception of memoory size and processor it isnt much difference.
Can anyone help me to get Lineage on my phone i really need to get it running again.
thanks for the help in advance.
Click to expand...
Click to collapse
????? you're mistaken bro j5 SM-J500M rom will never boot on j5 prime SM-G570M there is space OS for j500M and G570M not that you've booted j500m rom on G570m never
G570m has a plenty of roms search them on xda bro
Look's like Galaxy tab E 9.6 is getting lineage os 18 .1
Link: https://www.getdroidtips.com/lineage-os-18/
marko.hinke96 said:
Look's like Galaxy tab E 9.6 is getting lineage os 18 .1
Link: https://www.getdroidtips.com/lineage-os-18/
Click to expand...
Click to collapse
Please check your PM inbox. Thank you.
-Regards: Badger50
It looks like it's not supported yet.
Any news for this update?
Officially SMT-560/561 with Spreadtrum processor not uptaded anymore. But you can flash custom ROM. In my personal opinion,Lineage OS 14.1,Viper OS 5 are the best variants. At first you may to flash TWRP.
The latest version:
https://forum.xda-developers.com/t/unofficial-twrp-3-5-2-team-win-recovery-project-
Lineage:
samsung-galaxy-tab-e-sm-t560-61-gtel3g-gtelwifi.4270585/
[UNOFFICIAL][ROM] LineageOS 14.1 for Galaxy Tab E [SM-T561/SM-T560]
Disclaimer: I am not responsible for any damage to you your device. Everything you do, you do on your own risk! Last year I got a Galaxy Tab E (SM-T560) from Samsung for free as gift to my new mobile phone. Unfortunately the ROMs for SM-T560NU...
forum.xda-developers.com
Viper:
[Discontinued] PORT ROM 7.1.2[T-560] & [T-561] ViperOS V5.1 for Galaxy tab E
clarification this is a port rom, so it is likely that when you connect the device to the PC or via bluetooth it shows a different model, it is normal since it is a hybrid between the original rom and the port the rom it on beta state so please...
forum.xda-developers.com
Before this operations you need make а backup!
SM-T560NU recently got the first version of LineageOS 18.1, not recommended to flash it if you're a newbie to flashing Custom ROMs since it's in Alpha phase and it runs great on mine.
Link here:
[UNOFFICIAL][ROM]BETA LineageOS 18.1 for Galaxy Tab E [SM-T560NU] May 7, 2023
This ROM is ONLY for SM-T560NU, NOT SM-T560. I CANNOT make a SM-T560 build as they are different CPU/SoCs. PLEASE BEFORE YOU decide to try this rom, you MUST read all of post 1, 2, 3 and 4 (about 10 minute read). If you think this is an...
forum.xda-developers.com
Fruse said:
SM-T560NU recently got the first version of LineageOS 18.1, not recommended to flash it if you're a newbie to flashing Custom ROMs since it's in Alpha phase and it runs great on mine.
Link here:
[UNOFFICIAL][ROM]BETA LineageOS 18.1 for Galaxy Tab E [SM-T560NU] May 7, 2023
This ROM is ONLY for SM-T560NU, NOT SM-T560. I CANNOT make a SM-T560 build as they are different CPU/SoCs. PLEASE BEFORE YOU decide to try this rom, you MUST read all of post 1, 2, 3 and 4 (about 10 minute read). If you think this is an...
forum.xda-developers.com
Click to expand...
Click to collapse
Thank you for information. But i have SM-T561 with Spreadtrum processor,because of this I can't flash this ROM.
Any plans or better - some code to test for SM-T560 (not NU) ? Any comments would be appreciated
When for the sm t560 ?
Tried on sm-t560 spreadtrum soc
Stuck on lineage logo
Hello. I am new in Snapdragon rom porting, but I have some experience with MTK6580 only.
Now, my main working device is Samsung Galaxy Tab A 8.0 SM T-350 and I want make it updated.
Having spent a lot of time searching for information, I decided to ask your advice. I'm interested in whether it's possible to port GSI firmware to Samsung Galaxy Tab A 8.0 SM T-350.
I check the device specs. It is not Treble device. It has a 32 bit soc - Snapdragon 410. The soc A type, if I'm not mistaken.
And moreover, I found the 32 bit GSI Firmware - DotOS 5.2 (Android 12), with A-type support.
This device already has Lineageos 18.1 Go, so I dare say that the kernel should be suitable for Android 12. But, I don't know exactly about this kernel.
If you have some guides or information about such porting, I will be grateful
Devices older than the SM-T350 have been treble-ized so I think it's possible, but I personally have no plans on doing so. You should research which older devices have been treble-ized and study their git changes to see what is required. It likely will require kernel and device tree changes.
As far as I know, no msm8916 device has been treble-ized, but I could be wrong on that.