Database Users

You are subscribed to this thread Imate JasJar Enterin Bootloader mode.Turnon fail

Hello Everyone,
I am not a professional or anything i am just a student.So kindly when you use the terminology make sure its understandable for a person with less knowledge about unlocking and stuff.
Ok here goes my problem, Its an I-mate Jasjar and its not turning on when i press the Power button. It shows USB on top and V1.00 when entering Bootloader mode. I dont know what am i suppose to do after that as i ran into a professional guy on msn and he showed me how to get into bootloader mode and he is too busy to help me out so i am here.
What i did was Its battery was low and i tried to Hard Reset it and now it wont turn on.
So any help is much appreciated

instuctions for stuck in bootloader, but Uni is recognized.
http://wiki.xda-developers.com/index.php?pagename=Uni_Stuck_Bootloader
instuctions for stuck in bootloader, and Uni is not recognized.
http://wiki.xda-developers.com/index.php?pagename=Uni_Stuck_Bootloader_Serial

chasmanian said:
instuctions for stuck in bootloader, but Uni is recognized.
http://wiki.xda-developers.com/index.php?pagename=Uni_Stuck_Bootloader
instuctions for stuck in bootloader, and Uni is not recognized.
http://wiki.xda-developers.com/index.php?pagename=Uni_Stuck_Bootloader_Serial
Click to expand...
Click to collapse
Well said!
In the Wiki you can find a lot of usefull help!

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is the Error i am getting when i followed Method 2 .
Kindly tell me what am i doing wrong i already Unchecked the USB connection in ActiveSync ....Whatelse am i suppose to do...please guys i really love this phone and cant wait to use it again.
Thanks.
ZODI.

hi ZODI,
you better kill the ActiveSync all together by using windows tak manager. I mean to kill the process called wcescom.exe on your PC.
Then reconnect your UNIVERSAL.
Wait a bit, then have a look in PC's Device Manager, if your UNIVERSAL was recognised and it should be listed within USB devices as HTC USB Sync or similar.
If so, then do a reflash one more time.
good luck
buzz

Hi ZODI,
you'd better kill ActiveSync all the way down, by using windows task manager.
- disconnect your UNIVERSAL
- kill wcescomm.exe process on your PC
- connect your UNI again and wait a bit
- check if display shows USB at the top of the screen
- in PC's Device Manager check, if the device driver (HTC USB Sync) was loaded
If all done, proceed and do a ROM REFLASH.
If not, you may also check at http://buzzdev.net/list.php?40 mainly those two sticky posts at the top.
good luck
buzz

Ok giving it a try ....hope it works this time and thanks.

ZODI said:
Ok giving it a try ....hope it works this time and thanks.
Click to expand...
Click to collapse
Ok as i said i tried everything and made it to connect somehow and i was able to follow the method as shown but as it said it should reboot...it didnt reboot.

ZODI said:
Ok as i said i tried everything and made it to connect somehow and i was able to follow the method as shown but as it said it should reboot...it didnt boot.
Click to expand...
Click to collapse
I think i am gonna have find a Service centre and spend huge amount of my pocket money in just getting my phone to work

OMG .... i DID IT !!!!!!!!!!!! omg thanks guys i love you all
Love ya buzz from the bottom of my heart THANKS BRO !!!! and each and everyone of ya <3

[Solved]

I finally got it to work.
I owe a BIG thanks to everyone that posted, especially b63.
Thank you all so very much

what is on the display of your kf ?
kindle fire static or animated or any other display ?
what do you see in device manager ?
sort of adb device ? kindle ?

When you go into device manager on your computer does it have a yellow triangle on your Android device? If it does, you need to install the drivers for it.
I know when I was rooting my device, I needed to keep installing the drivers. Not sure why but I did. Must have installed it about 4 times. Every time an action took place it needed to be reinstalled.

b63 said:
what is on the display of your kf ?
kindle fire static or animated or any other display ?
what do you see in device manager ?
sort of adb device ? kindle ?
Click to expand...
Click to collapse
It's stuck on the yellow fire triangle.
In device manager, it is either Kindle (won't let me install drivers for it)
or 'unkown' - again, it won't let me install drivers for it.
[email protected] said:
When you go into device manager on your computer does it have a yellow triangle on your Android device? If it does, you need to install the drivers for it.
I know when I was rooting my device, I needed to keep installing the drivers. Not sure why but I did. Must have installed it about 4 times. Every time an action took place it needed to be reinstalled.
Click to expand...
Click to collapse
I've tried to install the drivers but it always says that it cannot find any drivers in the folder I choose. And I've tried several different versions.

The drivers are in the KFU downlaod. There is a folder for them and you need to manually choose it so it searches there.

[email protected] said:
The drivers are in the KFU downlaod. There is a folder for them and you need to manually choose it so it searches there.
Click to expand...
Click to collapse
As I said, I get the same error message no matter which drivers folder I choose...

http://forum.xda-developers.com/showpost.php?p=20855280&postcount=54

b63 said:
http://forum.xda-developers.com/showpost.php?p=20855280&postcount=54
Click to expand...
Click to collapse
Same thing.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

The KF auto install drivers. Fixed this by plugging the KF in going to Start>control panel>device and printers> you'll see 'Kindle' at the top>right click>properties>uninstall. Then run the fast boot bootmode 4000.
Sent from my Incredible 2 using xda premium

Clemzon said:
The KF auto install drivers. Fixed this by plugging the KF in going to Start>control panel>device and printers> you'll see 'Kindle' at the top>right click>properties>uninstall. Then run the fast boot bootmode 4000.
Sent from my Incredible 2 using xda premium
Click to expand...
Click to collapse
Fastboot doesn't detect the device.

BIGboy! said:
Fastboot doesn't detect the device.
Click to expand...
Click to collapse
I finally got it to work.
I owe a BIG thanks to everyone that posted, especially b63.
Thank you all so very much

BIGboy! said:
I finally got it to work.
I owe a BIG thanks to everyone that posted, especially b63.
Thank you all so very much
Click to expand...
Click to collapse
How did you get it to work?

[Q] USB access to phone is not working

I wanted to get some picture from my phone to the PC and I'm confronting many errors new to me as of today. Never had this problem untill now and I hadn't changed anything recently.
Can not acess DCIM > Camera file. When I do it's empty
Can't see any pictures neither can I transfer any
Started transfering and I got an error
Look at the picture below
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

gr4v1ty said:
I wanted to get some picture from my phone to the PC and I'm confronting many errors new to me as of today. Never had this problem untill now and I hadn't changed anything recently.
Can not acess DCIM > Camera file. When I do it's empty
Can't see any pictures neither can I transfer any
Started transfering and I got an error
Look at the picture below
Click to expand...
Click to collapse
Try uninstalling the drivers via "Device Manger" on your pc and reconnect the device. Also, do u have usb debugging enabled in developer options?

SUDroid said:
Try uninstalling the drivers via "Device Manger" on your pc and reconnect the device. Also, do u have usb debugging enabled in developer options?
Click to expand...
Click to collapse
Now after a reset of the phone, device isn't recognized and the connected as media device doesn't show up anymore. Tried more than 1 computer.

Try uninstall the USB drivers from your PC. Or try other USB ports to detect your device. Sounds like your USB drivers has screwed up. Should not be your device problem.

Elvind Anderson said:
Try uninstall the USB drivers from your PC. Or try other USB ports to detect your device. Sounds like your USB drivers has screwed up. Should not be your device problem.
Click to expand...
Click to collapse
I tried on some other computers... You think uninstalling the drive will solve the problem since it's not on my main PC only?
EDIT : May it have something to do with this?

I have a feeling it is the charging port. I had a similar issue. Are you good with a soldering iron?
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app

gr4v1ty said:
I tried on some other computers... You think uninstalling the drive will solve the problem since it's not on my main PC only?
EDIT : May it have something to do with this?
Click to expand...
Click to collapse
Before start working on the hardware, I suggest to investigate the software side further. Have you make a factory reset? (Worst case). Try enable and disable the USB debugging mode as well. http://androidteen.com/how-to-enable-usb-debugging-mode-on-android-devices/
Try to toggle both media file mode and camera mode. See what is the response from your device to pc.

gr4v1ty said:
I tried on some other computers... You think uninstalling the drive will solve the problem since it's not on my main PC only?
EDIT : May it have something to do with this?
Click to expand...
Click to collapse
Don't connect to the internet and connect your phone with the drivers uninstalled. This will dl the stock window drivers instead of samsung drivers.

SUDroid said:
Don't connect to the internet and connect your phone with the drives uninstalled. This will dl the stock window drivers instead of samsung drivers.
Click to expand...
Click to collapse
How do you even unisntall those drivers? I've tried installing Kies and it didn't work!à
EDIT: I did uninstall them and installed this : http://forum.xda-developers.com/showthread.php?t=961956... Still, no positive result..

gr4v1ty said:
How do you even unisntall those drivers? I've tried installing Kies and it didn't work!à
EDIT: I did uninstall them and installed this : http://forum.xda-developers.com/showthread.php?t=961956... Still, no positive result..
Click to expand...
Click to collapse
You uninstall the driver via "Device Manager" which u can get by right clicking "My computer" and click on Manage.
Then find the device manager tab and find your device on the list.

SUDroid said:
You uninstall the driver via "Device Manager" which u can get by right clicking "My computer" and click on Manage.
Then find the device manager tab and find your device on the list.
Click to expand...
Click to collapse
The device doesn't show in DM anymore...
EDIT : Problem solved itself. Today it decided to install the good drivers ...

Need Help Manual Fastboot Driver Installation

Hello
Sorry if this was a very noob topic
I done lots of flashing new ROM or back in stock process but i almost gave up this time
My phone status are
No OS
TWRP installed
Can boot to recovery
PC can't recognize the phone
Typing ADB devices shows empty list
Typing Fastboot devices also shows empty lines
30% battery left
I recently try to install the Lollipop version for my phone but it turns out that the zip are behaving like OTA (yep the title of the zips are OTA)
What i mean is it returned my recovery to stock
Without thinking much further i did 'fastboot flash recovery TWRP2810.img' thing (Yes i rename recovery image that way so it will be more convenience for me) and wipe all partition in the phone through the TWRP without problems
One thing i forgot is to "refresh" all ADB and Fastboot driver for my phone on the PC
Now my phone states are "No OS" and "PC doesn't recognize my phone" wether in ADB (obvious cause i can't boot with no OS so no USB debugging for me) and Fastboot (Enter Bootloader is OK, enter TWRP is OK too)
I already try the WUG step for installing the needed driver but no success since my PC can't recognize my phone
Try on 4 PC at my office and all of them are ignoring my phone
What should i do now, please, any help will be appreciated since its already the time i ussualy already at home
Thank You Very VERY MUCH for any help I can get.

unsungkhan said:
Okay, here's what you do.
Download the ADB drivers first, from here [URL="link"]http://developer.android.com/sdk/win-usb.html
Click to expand...
Click to collapse
unsungkhan said:
Extract the zip.
Once you're done extracting, boot your phone into bootloader mode, plug in USB, should show up as an unrecognized device.
Device manager from control panel, select device, properties, driver, update device driver, browse my computer, let me pick, all devices, have disk, navigate to where you extracted zip, select inf file, adb interface.
Should work.
Click to expand...
Click to collapse
[/URL]
Thank you Sir
I managed to fresh install my XP and continue with your instructions
I don't know why but it gave me this
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I already try other driver but still a no go?
Do you happen to know other way around for tricking this Sir?

Please lock this unuseful thread

Before locking the thread, can you repeat all the steps and try with ADB Composite Device instead of ADB Interface?
Also, did you try changing USB ports, sometimes these things get a little troublesome because of faulty USB ports.
Last but not the least, you could also try a change of cables.

unsungkhan said:
Before locking the thread, can you repeat all the steps and try with ADB Composite Device instead of ADB Interface?
Also, did you try changing USB ports, sometimes these things get a little troublesome because of faulty USB ports.
Last but not the least, you could also try a change of cables.
Click to expand...
Click to collapse
#late_post
i've been able to resurrect my phone finally
after those steps i found Universal Naked Driver and it works
Thank You very MUCH Sir :laugh:

[UNBRICK] Unbrick Tutorial For The OnePlus 3T!!!!!!!!! by Haris K.

Hey Guys!!!
Many people who own the new OnePlus3T and try to install root or TWRP etc. will often get errors.
In my Case it was so that I could not go back on my TWRP backup. Unfortunately there was at that time no OnePlus3T Rom, so I tried to install from the original page the OnePlus3 Rom. finally came out -> My OPT3 was bricked....
A hard brick is very hard to fix at the moment, because the tools etc. are still outdated and currently run only for the OP3 and not for the T model. That's why I took the trouble and sometimes put the files together. Now I have also managed to unbrick my OP3T.
So, I'm a nice guy and I publish my Files for fixing the OnePlus3T.
For the on Plus 3:
Step 1: Download Driver and Unbricktool
1) Driver: https://mega.nz/#!AgohmbqC!h16GeeOnlvubYDyfID3feY-qVJuBZiWVvYsXSAeKIA8
2) Unbricktool(OP3T): https://mega.nz/#!Q1YnTTAT!gnLf6NEkSRy7W-WY8J0H2SmJJLzO91-vReKx7B1VVpI
Step 1: Extract Drivers and Recovery Tool files on Desktop.
Step 2: If you are using Windows other than Windows XP,turn off Driver Signature Enforcement.To do so,follow this guide :
http://www.howtogeek.com/167723/how...8.1-so-that-you-can-install-unsigned-drivers/
Step 3: Press the power button for 40 seconds to turn off the phone.
Step 4: Press the volume up button for 10 seconds, while connecting the device with the computer.
Step 5: Open your device-manager and make sure in "Unknown devices" is one device with the name "QHUSB_BULK".
Step 6: Right Click on your device in the device manager and select Update Device Software. Choose manually the drivers folder and install the driver.
Step 7: When the device shows as "Qualcomm 9008", go run the MSM Download Tool as administrator.
Step 8: Click start at top left corner and wait for it to finish (green text will come).
Step 9: Disconnect phone from PC and boot into system.
Welcome back in life OP3T!!!
There you are! Don't forget to thank!
EDIT: Sorry for my bad english!

Time to try this tool. I have lost a lot of space on my 128GB 3T as you can see.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
View attachment 3967333

lindahl85 said:
Time to try this tool. I have lost a lot of space on my 128GB 3T as you can see.
View attachment 3967332
View attachment 3967333
Click to expand...
Click to collapse
Yeah sure, try it! Please share your Result with me. :good::fingers-crossed:
Edit: I guess your System is formated wrong.

I guess it´s finished now?

lindahl85 said:
I guess it�s finished now?
View attachment 3967345
Click to expand...
Click to collapse
Sure, it finished now. Try to boot into your System. If it doesn't work, write back.
- If you need help, we can do a remote control session.

The results
It worked

lindahl85 said:
It worked
View attachment 3967356
View attachment 3967357
Click to expand...
Click to collapse
Yeah! Nice, welcome back in life Oneplus 3T :fingers-crossed::fingers-crossed::fingers-crossed:

The OP3T toolkit makes this problem for me so i have to use your tool once again

lindahl85 said:
The OP3T toolkit makes this problem for me so i have to use your tool once again
Click to expand...
Click to collapse
Oh, okey.. so let me know if it works again.

I don´t see QHUSB_BULK this time

Oh.. should I check it @ remote session?

Should I check it via remote control?

LloydSmallwood said:
Should I check it via remote control?
Click to expand...
Click to collapse
It downloading anyway on NO.22 like before. No yellow light this time.
EDIT:
Now it´s yellow. At the step when downloading system.img

Windows pops up a box that says "An error occured with the usb device" Msm tool ends up like this now.

lindahl85 said:
It downloading anyway on NO.22 like before. No yellow light this time.
EDIT:
Now it´s yellow. At the step when downloading system.img
Click to expand...
Click to collapse
Nice okey, write if the process is finished.

LloydSmallwood said:
Nice okey, write if the process is finished.
Click to expand...
Click to collapse
Failed. Unknown usb device now in device manager.

lindahl85 said:
Windows pops up a box that says "An error occured with the usb device" Msm tool ends up like this now.
View attachment 3967420
Click to expand...
Click to collapse
Uh, try to disconnect your device and turn it on. If its blackscreen only, try to charge it with the original cable. If it shows no reaction. Try to install the drivers again and run the tool again in administrator mode.
:good:

Blackscreen after i try to turn it on. No yellow light. No response on charging. Pressing volume up and connecting cable in testmode on windows but no response in device manager.
It´s there though.

lindahl85 said:
Blackscreen after i try to turn it on. No yellow light. No response on charging. Pressing volume up and connecting cable in testmode on windows but no response in device manager.
Click to expand...
Click to collapse
Reinstall the driver from the device. Hold the Powerbutton for like 40 sec. after it, connect it to your computer and open device manager, it should show as Unknown Device....

I have a com device here now.