Database Users

TV Out clone view

I bought a mini HDMI cable to connect my Archos 101 Internet Tablet to my TV. It works fairly well but the Archos display will go black if I connect to the TV. It then is basically a touchpad.
Is there any way to change the mode to a clone view so that I have the same thing on the Archos display as on my TV. This should make navigating for picture slideshows much easier.
I'm running the latest 2.0.71 firmware (+ GApps)

Nope. Not right now. I would like this as well.

can someone teach me how to connect to the TV?
nothing shows up on my TV at all. i use a mini-to-full hdmi cable and have switched to the HDMI channel on my TV already. I've also toggled the TV out mode on my tablet but it just shows nothing on my TV

Same here..

redname said:
can someone teach me how to connect to the TV?
nothing shows up on my TV at all. i use a mini-to-full hdmi cable and have switched to the HDMI channel on my TV already. I've also toggled the TV out mode on my tablet but it just shows nothing on my TV
Click to expand...
Click to collapse
Try in this order :
- Put Tv on HDMI input (select the good one)
- Plug the Wire
- Click on switch screen widget.
In this order it should work

zizoom said:
Try in this order :
- Put Tv on HDMI input (select the good one)
- Plug the Wire
- Click on switch screen widget.
In this order it should work
Click to expand...
Click to collapse
thanks, it worked aft trying out your steps

How do i get hdmi to work?

I tried connecting the tab to my 720p TV and all I get is the android mascot saying 720p? The sound however plays if I play some video. Does anyone else have this problem?

gIVE MORE INFO IT SHOULD JUST WORK
first ..
is your tablet Stock . some custom roms have issues with hdmi..
have you tested the cable with another device.. the micro hdmi cable seems to have a very high defective rate.
With the above known issues ..
if you are stock and you have your tv on the correct input device setting.
try connecting the cable set the tv correctly.. as in hdmi 3 in the tvs menue and the cable connected to port 3..
turn off both ..
turn on tv set it hdmi 3.
turn off your tablet. plug in the cable to iconia.. turn on tablet.. see if this works..
others have said this helps.. my hdmi port would not work correctly when i got my tablet had to hold the hdmi cable just right. this was only temporary for some reason.. g
GOOD LUCK..

Is the picture your seeing with the android figure on your Iconia or your tv?? Or both??? You should see a mirror image of your iconia on the tv. If your getting the message on the tv and the iconia is displaying its normal desktop image than your tv may not support 720p input or your iconia couldn't negotiate the resolution with your tv. Try a different hdmi port or a different tv and see what happens.

its stock with the latest os. The message only shows up on the TV. TV definitely supports 720p as that's what I am outputting my TV stb and my streaming box to. Hopefully this is just a case of a defective microusb cable. I could try it another TV, but it wouldn't tell me if the ddevice is defective or the cable. I guess I will have to buy another microusb cable aand hope it works.

If your seeing an image on your tv than I don't think its the cable. The Iconia just may not be able to talk to your tv properly. I would try it on another tv if able just to confirm. Also, turn your tv off, fully power down your tablet, plug together, first turn on tv, after tv is up and running then turn on your iconia. It seems to me that something is going on with the hdmi handshake and this should get your devices to talk to each other in the correct order.

cruise350 said:
If your seeing an image on your tv than I don't think its the cable. The Iconia just may not be able to talk to your tv properly. I would try it on another tv if able just to confirm. Also, turn your tv off, fully power down your tablet, plug together, first turn on tv, after tv is up and running then turn on your iconia. It seems to me that something is going on with the hdmi handshake and this should get your devices to talk to each other in the correct order.
Click to expand...
Click to collapse
My Iconia works fine, but I had this same issue on an older Toshiba laptop, and these procedures worked every time.

So I tried the above instructions turning both devices on, connecting, turning tv on first and then the iconia but still the same result. The green android mascot with the 720p? speech bubble. I guess I will have to try another tv somewhere.

Same issue for me, I bought this cable today for 19,99 €.
I read in an another thread (not in xda), that the problem is solved with a high quality cable (hdmi 1.3 or more, 39,99 €).
Or directly in the acer store : here.

Jut07 said:
Same issue for me, I bought this cable today for 19,99 €.
I read in an another thread (not in xda), that the problem is solved with a high quality cable (hdmi 1.3 or more, 39,99 €).
Or directly in the acer store : here.
Click to expand...
Click to collapse
Are you on a stock rom near stock.. Some of the Well cooked roms could have a issue with this function.. If you are on a custom rom.. Go to the rom developers thread and ask this Question . If you are on stock 3.2.1 the most current . I would try if you can to test your cable. If the cable is not bad Call ACER (GOOD LUCK WITH THAT). I know mine I put the cable in back of tv on HDMI 4 . SET THE TV Input to hdmi 4 and plug it in..
anyway good luck also people have said they needed to wiggly around there cable use caution doing so..

im using a 6€ cable from some cheap market and everything works fine with thors kernel 3.9r4..
i had many troubles with hdmi and other kernels.. tv and tablet have to be on and then plug in the cable.. thats the only way to get it working for me

[GUIDE] Play PS2 and PS3 Games on your SGS3

What is this guide about?
To play PS2 and PS3 games on your SGS3 and other mobile devices. It will show you what is required to do this and how to set it all up. Its very simple to do but I do expect you to know how to install programs on a computer, plug cables in and change settings in your PS3. This method does not use any illegal software or emulators.
Notes:
I found out how to do this by accident. I was looking around for ways to record my gameplay using a video capture device. The options were expensive but thankfully there is a cheap and easy option. Its called EzCAP 116 USB 2.0 Video Capture. It only costs £19.99 and comes from the UK. For USA its $31.95. HD video capture devices are alot more expensive but it is not needed for what we are using it for.
So here are the requirements that you need to play PS2/PS3 games on a SGS3.
1. PS2 or PS3 with wireless controller
2. Windows laptop or computer
3. Wifi N Router (computer must be connected with LAN cable)
4. Ezcap 116 USB 2.0 Video Capture
5. Playstation analogue cable (S-Video or RCA)
6. Video capture software (comes with the EzCAP)
7. Splashtop remote desktop (Currently half price)
This should be relatively inexpensive if you have most of the items above already. I only needed to buy the Ezcap and Splashtop app. Total spend is £23.
Ok lets start.
The first thing to do is download and install the Splashtop remote desktop app on your mobile and the Splashtop streamer on your computer.
The next thing to do is install the Ezcap drivers and video capture software supplied on the disc and plug the Ezcap in to your computer. Then plug in the playstation cable into your PS2/PS3 and Ezcap.
Now turn your PS2/PS3 on. Turn your TV on also if you've got a PS3. Now on your computer run the video capture software which is Arcsoft Showbiz and press Capture on the top left. The capture module will open in a new window.
Set the Video Input to S-Video or Composite for the cable you used. The Audio device to Line (USB EMP Audio Device). Then Press Device Settings and set your video standard to PAL_I for UK, NTSC_433 for USA and press OK. If you can see a blank square grey screen in the capture module then your Ezcap is working correctly. If not then unplug and plug the Ezcap back in and press refresh.
(Skip the next part if your using a PS2)
PS3 Setup:
If your doing this with a PS3 and your using a HDTV then you need to change the display settings to output video and sound through the AV MULTI/SCART before you will see the picture show on your computer. The PS3 display settings to set are RGB, Standard and 4:3. For audio set it to AV MULTI.
As soon as you set the video output setting to AV MULTI/SCART then RGB, you should now see your PS3 display on your computer through the capture module. Press X to accept setting. Continue the display settings as above.
PS2 Setup:
It already outputs analogue video so nothing to set. Just turn it on and the PS2 will display in the capture module on your computer.
Now that you have your PS2/PS3 displaying on your computer. The fun now begins.
Start Splashtop on your mobile and your computer should be shown. Make sure the resolution is set to 1280x720 in the settings. Now select your computer to start the stream. Your computer's display should be mirrored on your mobile. Double tap on the capture module's video window to go to full screen. Put a game disc in and start the fun.
The Splashtop app allows you pinch zoom, so you can zoom in to fill out the S3's screen if you want.
The Sixaxis Dualshock 3 has a good range so you don't have to be near the PS3 or in the same room. Thats the beauty of this method. Freedom to play anywhere in your house. You will need to be within good range of your wifi router though. As for the PS2, you can get RF wireless controllers. I've used one, one floor below where my PS2 is and it works fine with no lag.
So thats it. You basically have a portable PS2 or PS3 with this method. What this really needs though is a Gameklip to mount your mobile onto the controller to make it even more portable and convenient. It should give you the portable console experience. Check it out on here. http://forum.xda-developers.com/showthread.php?t=1760595
This guide can apply to any tablets or mobiles that splashtop supports.
Screenshots to be added

reserved

Miracast working with windiws 8.1 after update (Resolution problem)

I can confirm that screen mirroring is now working with Windows 8.1 devices that support miracast. I have connected to my firetv with my surface pro 3 multiple times with great success and no last. (probably my best miracast experience yet)
However, after the initial connection, upon reconnecting it sets the resolution really low, like 1200x700 or something close. At this resolution windows metro apps will not run, this making miracast a little less useful.
Any body think of a way to fix this? You can't just change the resolution on the computer to a higher resolution it doesn't see it as a supported resolution. Anyone else have a similar issue?
I'm running the newest Intel drivers on the surface pro 3.

How did you get Miracast working? Is anyone else seeing it working?
I've got a Fire TV Stick on version 54.1.1.0_user_110035420 (March 2015), and it doesn't work for me still with my Surface Pro 3 that's on the same WiFi network.
I start by choosing Mirroring on the Fire TV Stick, and a window pops up on screen that says guest devices can wirelessly mirror now. I then sweep out the Charms bar from the right on Windows, choose Devices, and then Project, add a wireless display. It sits for a while on a screen saying "Searching for devices", and then it always just says no devices found.

manekineko said:
How did you get Miracast working? Is anyone else seeing it working?
I've got a Fire TV Stick on version 54.1.1.0_user_110035420 (March 2015), and it doesn't work for me still with my Surface Pro 3 that's on the same WiFi network.
I start by choosing Mirroring on the Fire TV Stick, and a window pops up on screen that says guest devices can wirelessly mirror now. I then sweep out the Charms bar from the right on Windows, choose Devices, and then Project, add a wireless display. It sits for a while on a screen saying "Searching for devices", and then it always just says no devices found.
Click to expand...
Click to collapse
I did what you said above. It is working but there is too much lag
Sent from my Nexus 5 using XDA Free mobile app

How do you make Miracast work? I tried and couldn't get it to work with windows 8.1

Do you have VirtualBox installed? I have had discovery problem with Roku's miracast mode because the VirtualBox network drivers. When the drivers were removed everything worked. This sucked because the drivers were for an android emulator.

miracast works also => lenovo yoga 2 pro (I use a extra intel widi wifi card for 5gh wifi)
but it works only one time, the next time you must remove your connected firetv in windows 8.1 and reboot the firetv.
After reboot it will work for one new connect and so on,..

manekineko said:
How did you get Miracast working? Is anyone else seeing it working?
I've got a Fire TV Stick on version 54.1.1.0_user_110035420 (March 2015), and it doesn't work for me still with my Surface Pro 3 that's on the same WiFi network.
I start by choosing Mirroring on the Fire TV Stick, and a window pops up on screen that says guest devices can wirelessly mirror now. I then sweep out the Charms bar from the right on Windows, choose Devices, and then Project, add a wireless display. It sits for a while on a screen saying "Searching for devices", and then it always just says no devices found.
Click to expand...
Click to collapse
I got it working by factory resetting my Fire TV Stick. I use the term "working" very loosely. This is more like a proof-of-concept than a working product.
I'm not seeing any of the problems with resolution that jdtimothy talked about, and I'm not seeing the need to reboot that Pat1981 saw, but it's still basically unusable. I'm constantly seeing some mix of: (1) lag, sometimes as long as seconds long, (2) random reboots of the Fire TV Stick while connected, (3) random freezes of the Fire TV Stick's screen while connected, though sometimes sound will continue to play, and (4) random disconnects.
I've found that using a high-resolution causes all of these problems to happen a lot more severely. Using 1080p lag is around 3-5 seconds, and a reboot of the Fire TV Stick is common. Using 1024x768 it basically works other than half second lag on everything. This is all while connected to an N-router located in the same room with no interference on the same channel.

Connecting Moverio BT-200 to Windows 8 directly with Miracast

Hi all,
Did anyone succeed already to make the Moverio BT-200 be monitor for a Windows 8 PC using Miracast?
This is what I tried already. Apologies for not adding the weblinks, but the forum rules won't allow.
1) The problem is that the BT-200 has a qHD resolution of 960 x 540 which is not supported by Windows 8. Therefore, I set the DownScaling bit to 1 in the registry. (Start Regedit, find all occurrences of Display1_DownScalingSupported and set the value(s) to 1).
2) I then started Miracast on Windows 8: go to right bottom corner, in the menu select "Devices" / select "Project" / click the dimmed "Add a wireless display".
3) On the BT-200 start a "Moverio mirror" session. It takes some synchronization effort to get the two devices see each other and get connected (have some patience while trying).
In the end I got the two connected, but I only get a black screen on the BT-200. When I try to configure the modes (right click on the desktop / choose "Screen Resolution / click "Advanced settings" / "Adapter" tab / "List all modes" button), the only mode shown is 1280 by 720 at 60 Hz.
Any way how I can fool the modes into a 960 x 540 configuration? Even better: how can I set up the Miracast connection as primary screen at startup?
Oh, and yes, I do have an Epson Wireless Mirroring Adapter, but it's not showing me the proper graphics either. for that reason I tried making the direct Miracast connection built-in into Windows 8.
Any pointer greatly appreciated.
Kind regards.

Hi,
I don't have any of these devices yet. But I am considering purchasing them. Just for screencasting what the user is seeing. I understand that it probably cant show the "augmented view". But, does the mirroring adapter sink function work ? Can I atleast see whatever is being cast to the user on a big screen using this adapter ?
Thanks.

aaaku said:
Hi,
I don't have any of these devices yet. But I am considering purchasing them. Just for screencasting what the user is seeing. I understand that it probably cant show the "augmented view". But, does the mirroring adapter sink function work ? Can I atleast see whatever is being cast to the user on a big screen using this adapter ?
Thanks.
Click to expand...
Click to collapse
Hi aaaku,
Yes, the mirroring adapter that is sold with the BT-200 works pretty well, but it's a clumsy device that very much limits the useability of the BT-200. While the BT-200 is battery operated, the Wireless Mirroring Adapter needs an adapter. Connecting it to a power bank works, but it uses quite some energy. Moreover the double interface (device to Mirroring Adapter, and then the Miracast connection between the Adapter and the BT-200) takes quite some time to set up properly. If you lose connection on the go, it's a guessing work where you lost the image or where a cable got disconnected. All-in-all it's not that smooth as you would like it (for me it turned out a showstopper even), and that's the reason why I wanted to Miracast from a Raspberry Pi directly to the BT-200.
As stated higher another issue is the not-quite-standard 960 x 540 resolution of the BT-200. Yes, it's possible to connect a Windows PC to the Wireless Mirroring Adapter, and then display the image on the BT-200. The BT-200 will even show a very clear image even. Since 960 x 540 is not recognized by Windows (or Linux, tried that too) it will display at a higher resolution, and the Mirroring Adapter will do the 960 x 540 translation. Read: some resolution is lost. It e.g. makes selecting menus and doing configurations under Windows 8 rather difficult as it's pretty hard to read the menus. For image viewing it works well, though. The image is bright and clear, and the display does what it promises.