Hi all. I rephrase my question: my head unit for Meecedes w211 from AliExpress seller Skyshadow is always booting into emergency dialer.
I can't pull any more info from the device. I tried using reset button. But it just boots to emergency dialer.
Heeeelllppp!
Hi all. I rephrase my question: my head unit for Meecedes w211 from AliExpress seller Skyshadow is always booting into emergency dialer.
I can't pull any more info from the device. I tried using reset button. But it just boots to emergency dialer.
Heeeelllppp!
Remove SIM card, disable pin.
criszz said:
Remove SIM card, disable pin.
Click to expand...
Click to collapse
The SIM card isn't even inserted!
I wanted to enable/disable PIN for Sim because the radio would not connect to data network. The unit would not accept my correct PIN. And even after asking for PUK, which I entered correctly, it would not save a new PIN, but ask for PUK again.
I removed the SIM and unlocked in my phone. Radio still asking for PUK/Pin.
I removed the sim card and it still boots to Enter PUK screen.
I did a reset...still asks for the PUK.
I can't get around this screen.
Damn, maybe a factory reset then from recovery helps.
criszz said:
Damn, maybe a factory reset then from recovery helps.
Click to expand...
Click to collapse
Can't figure out how to get into recovery.
The reseller did send me a flash file, roughly 2GB, instructed me to connect Key 1 wire to ground and start the radio.
It showed "Update finished" or something, but still boots into the bloody emergency dailer.
Start the radio same way without usb inserted.
criszz said:
Start the radio same way without usb inserted.
Click to expand...
Click to collapse
Then it says "file not found" or something and does not do anything
Related
I went ahead an installed Swype 3.9 and after it performed the soft reset after installation I can no longer unlock my phone with the 4 digit PIN I had set on it.
It's a new phone but I don't want to have to master reset it. I wouldn't even know how to!
What can I do now? Would I need to install a ROM or something to get it working again?
re-installing rom will result in you having to hard reset anyway.
Is there no startup delay for pin (similar to s2U2?)
Have you tried the PIN for the simcard?
I don't know the PIN for the simcard, it's an old simcard.
The slide to unlock screen comes up asking me for my PIN. It's a 4 digit number that I won't forget that I chose for the auto-lock function on the phone. WHenever I put my PIN in the phone reacts as if I got my PIN wrong. There's no chance I'd get this particular 4 digit number wrong.
What does 's2U2' mean?
slide 2 unlock app allows for delay before it automatically locks phone and asks for pin.
It is an installable cab.
If however it comes up immediately you will have no choice but to hard reset as it is clear you know the number an are trying to put it in carefully.
sry.
it's a known bug with swype 3.9 on phones that do not have a t mobile vendor id.
as far as I know hard reset is your only option. (there are several threads about it)
stay away from swype 3.9 ESPECIALLY if you use a pass word
OK, thanks peeps.
I'm going to look for a guide to reflashing the firmware.
I've put my simcard back in my trusty old K550i :-/
Nezbert said:
I've put my simcard back in my trusty old K550i :-/
Click to expand...
Click to collapse
Does itt work with Swype 3.9????
Nezbert said:
I went ahead an installed Swype 3.9 and after it performed the soft reset after installation I can no longer unlock my phone with the 4 digit PIN I had set on it.
It's a new phone but I don't want to have to master reset it. I wouldn't even know how to!
What can I do now? Would I need to install a ROM or something to get it working again?
Click to expand...
Click to collapse
I had the same problem with Swype. Turns out the only way to solve it is a hard reset: With the device off, hold both volume buttons and press the power button. Follow on screen instructions.
No need to flash the firmware, just don't install Swype!
pls how do I go about this? my client came with the unlock code just for me to enter it, but the phone is just showing "emergency call" no place to enter code. I guess it need HARD RESET, if yes, HOW?
I think you're suppose to insert a SIM card from a different carrier first for the unlocking code field to show up. I remember if you didn't put any SIM card into the phone, it'll just show the Emergency Call only screen. If you put in your SIM card, a box asking for the unlocking code will show up. I hope this helps.
Hi,i have a samsung i5700 brand 3.co.uk that show me "sim missing" message,it could be for the sim lock or it is faulty?what is the android message for the sim lock?there is a free solution for unlock?
Can it work this:
http://forum.xda-developers.com/showthread.php?t=906255
Thank you
ps:sorry for my bad english
n3dv3d said:
Hi,i have a samsung i5700 brand 3.co.uk that show me "sim missing" message,it could be for the sim lock or it is faulty?what is the android message for the sim lock?there is a free solution for unlock?
Can it work this:
http://forum.xda-developers.com/showthread.php?t=906255
Thank you
ps:sorry for my bad english
Click to expand...
Click to collapse
i have the same problem, but it is for mi sim card, because sometimes works, and sometimes do not work, i reboot, put sim out, put sim in, power on, and it works, check if ur sim is broken, or if you have a corrupted IMEI. If it is 000000... it is corrupted, it is a normal bug with some roms. It has NO FIX for the moment
Yep, it does that sometimes, on some ROMs more than on others. Shutting down the phone, taking out the SIM, cleaning it and putting it back in usually helps.
Paste a building tape on a SIMcard.
So i purchased sim unlock code online for my hd2 which is running WP7. I inserted the AT&T sim card and turned the phone on. The first thing phone requested pin, i entered it and it said that pin accepted but the phone is still locked. Every time im trying to call it asks for pin again and it says pin required. What should i do to get it working??
I have the exact same issue. Anyone? I've tried apn settings, rebooting, etc.
I fixed this! If you load android on an sd and boot it and then put in the lock code it will unlock your device. I used Copenhagen's Gingerbread. After that, boot into WP7 and it should display your carrier name. Try this Wolk and tell me what you think, and click thanks if you think I helped at all.
How did you do this? Im having trouble with only one sd-card 2gb
S6 edge when i insert sim the phone asks for a restart but after that i get no sim card message and if i reinsert it the same thing happens again.
Tried reflashing the phone thru smart switch but no luck.
Any ideas on this?
Thats what its supposed to do. Doesn't support "hot swapping" sim cards. Every time you take out your sim card and replace it with another or the same, a message will popup telling you to restart your phone.
Im assuming, of course, that you are not trying to use your phone without a sim card installed.
This phone has a problem and the problem is that when i put a sim card it asks to be restarted which is pretty normal but after the restart the phone shows no sim card but if i take out the sim it will prompt to be restarted again because the sim has been removed. So basically the phone somehow recognize the sim but does not read it.
Sorry if my post wasnt clear enough.
BR