Hi, dear community.
I bought a USB 3.0 stick, 64GB to load in to my music library. It was working absolutely flawlessly for 2 months or so, then, suddenly, my Android HU doesn't see the USB stick anymore. Like, at all.
I tried formatting with Rufus (latest) to FAT32 multiple times, but this doesn't help.
Other USB flashes work, for example a USB 2.0 8GB variant. Also, my Xiaomi Mi 11 gets recognized, no problems.
Is there something that I can do with this USB 3.0 stick, 64GB? Because, my PC recognizes the USB and it's contents no problem.
Hope you can advise.
Thanks in advance.
You checked the USB stick with chksk?
TorstenH said:
You checked the USB stick with chksk?
Click to expand...
Click to collapse
Just did it, no problems or bad sectors detected.
Related
Hello guys so here is the issue
None of the usb 3.0 device seems to work In otg mode(all usb 3.0 devices are reverse compatible to usb 2.0) i plugged my 500gb hdd with externa power then a 16 gb usb 3.0 pendrive with no success as soon as the device get recognised i see usb safe to remove notification and then no udisk in explorer.
I seriously need a solution as all my usb devices are usb 3.0
Also when the hardware is capablr of usb 3.0 why did gionee crippled it to usb2.0 only?
dhirajranger said:
Hello guys so here is the issue
None of the usb 3.0 device seems to work In otg mode(all usb 3.0 devices are reverse compatible to usb 2.0) i plugged my 500gb hdd with externa power then a 16 gb usb 3.0 pendrive with no success as soon as the device get recognised i see usb safe to remove notification and then no udisk in explorer.
I seriously need a solution as all my usb devices are usb 3.0
Also when the hardware is capablr of usb 3.0 why did gionee crippled it to usb2.0 only?
Click to expand...
Click to collapse
Usb 3.0 port differs from 2.0 see the usb port of note 3 so it might be a problem to include it....since some HDD consume more power they will not work..ive tried with OTG and a trancend usb 3.0 8gb pendrive and it worked flawlessly
GTARaja said:
Usb 3.0 port differs from 2.0 see the usb port of note 3 so it might be a problem to include it....since some HDD consume more power they will not work..ive tried with OTG and a trancend usb 3.0 8gb pendrive and it worked flawlessly
Click to expand...
Click to collapse
yeah i know the port differs but since the soc is same i think we can solder a usb 3.0 with some tweaking. anyways i provided hdd with esternal power with the help of a cable i modified. also did you tried any 16gb pendrive? i think size may have been a problem too?
also pls can you try an external hddso that i woud be certain that this is not a issue with my phone only. thanks in advance
anybody else getting same issue? (notification saying usb safe to remove..)
dhirajranger said:
yeah i know the port differs but since the soc is same i think we can solder a usb 3.0 with some tweaking. anyways i provided hdd with esternal power with the help of a cable i modified. also did you tried any 16gb pendrive? i think size may have been a problem too?
also pls can you try an external hddso that i woud be certain that this is not a issue with my phone only. thanks in advance
anybody else getting same issue? (notification saying usb safe to remove..)
Click to expand...
Click to collapse
All you have to do is install Paragon NTFS & HFS+ on your phone & grant it superuser permission. Now use ES File Explorer to go to the /mount directory & you will find your hard disk partition there.
Sometimes you may get an error while trying to access the files in the secondary partitions. For this issue you will have to manually unmount those partitions in Paragon app and mount them to a location of your choice.
Hope this helps.
Hubriss said:
All you have to do is install Paragon NTFS & HFS+ on your phone & grant it superuser permission. Now use ES File Explorer to go to the /mount directory & you will find your hard disk partition there.
Sometimes you may get an error while trying to access the files in the secondary partitions. For this issue you will have to manually unmount those partitions in Paragon app and mount them to a location of your choice.
Hope this helps.
Click to expand...
Click to collapse
thanks bro it worked like charm.
Hi Guys,
does anyone know if there are any issues with the OTG on the stock Galaxy S4 (i9506 Telstra)?
I purchased a Sandisk Dual USB OTG drive 64GB and for some reason after it detects it and says "USB Connector Connected", it comes up with "USB Mass Storage Safely Removed" straight away.
I have checked few of the apps on the market that check if OTG works, and they all show it is enabled on the device.
I have also formated the drive exFat and tried FAT32, and neither of them work.
any ideas why the drive unmounts automatically?
@AntaresOne. Throw some light here!
"If someone helps, never forget to hit thanks ? "
@stormleader
Hello,
First, FAT32 is made to be used on disks of max 32GB (you can also use exFAT on this size as I currently do), and starting from 64GB you should always use exFAT.
Are you sure that device's USB connector is not dirty? If may be, clean it with a toothpick.
If this doesn't solve your problem, see if there are software updates for your device (could be a software issue), try also an other OTG device (a simple pendrive+OTG cable is enough)
Inviato dal mio GT-I9505
AntaresOne said:
@stormleader
Hello,
First, FAT32 is made to be used on disks of max 32GB (you can also use exFAT on this size as I currently do), and starting from 64GB you should always use exFAT.
Are you sure that device's USB connector is not dirty? If may be, clean it with a toothpick.
If this doesn't solve your problem, see if there are software updates for your device (could be a software issue), try also an other OTG device (a simple pendrive+OTG cable is enough)
Inviato dal mio GT-I9505
Click to expand...
Click to collapse
cool, thanks. didn't know about the FAT32 limitation. and Yes my USB connector is clean and all. it doesn't seem to be hardware problem. I've got the latest stock 4.3.
I'll try on another S4 when I get the chance. I might need to get OTG cable, will come in handy one day. All I have right now is that Sandisk USB stick (which is very handy to have when it works )
I"ll try few more things and report back. I just wanted to check if anyone has OTG USB drive that works with the S4.
I just figured it out. I had encryption enabled on my phone memory and SD card. Not sure why this interferes with reading the USB.
It worked perfectly as soon as I disabled the decryption on the phone and SD card.
Hi everyone,
just purchased my redmi pro with miui 8.0.4.0. working great!! only noted that the OTG function is not working. does not detect my thumbdrive despite using adapter for usb type c and formatting thumbdrive to fat32.
file transfer via pc works well.
is it because the miui not being original?
please help.
thank you
working now
now working. Had to purchase Remax usb 3.0 to type C to work. don't buy non branded adapters.
Shafriefmai said:
now working. Had to purchase Remax usb 3.0 to type C to work. don't buy non branded adapters.
Click to expand...
Click to collapse
ive used the remax as well its a great adapter
Hello,
I am the owner of a zenpad 10 z500m p027.
I tried to unplug a 1000 GB external hard drive via the USB port.
The tablet detects the disc but refuses to read it, it accepts USB sticks.
Do you think that ASUS locks the reading capacity of USB?
Would you know a solution to solve this problem?
I specify that the hard drive is perfectly recognized by other Android phones.
I unlocked developer mode and enabled debugging, but nothing works.
Thank you in advance for your help.
Hi @All,
i hope you guys can help me. I just bought and asembled the android radio into my car. Everything worked fine besides bluetooth (lost connection everytime after 5 seconds)
Anyhow, i changed a (bluetooth) setting in the advanced settings menu after that the android screen where frozen. After pressing the hardware reset botton for 15sec. , the android gui disapeared.
Just the orgioninal (old BMW gui works), touchsreen without function
https://de.aliexpress.com/item/32959391140.html?spm=a2g0s.9042311.0.0.e6844c4dtWjQvc
The supplier send me the image of the firmware to fix the issue, but the device dosent boot from USB nor from SD. Do i need to try to boot from a bootable Android 9 SD (USB) first and then choose factory defaults
and use the image from the supplier for that? USB /SD format FAT32, ore does NTFS also work?
Many thanks for your help
Best Regards
Sven
Hello,
The usb drive /SDCard has to be formatted FAT32 and the partition should not be larger than 32 GB.
On some models the devices do not boot from both USB ports (red and yellow) only one does work, try both.
Maybe it also helps do disconnect the car, and boot the device only from Power without the car.
Did you only get an OTA Update file or a complete OS image, can you upload it somwhere for check ?
sincerely Chri
Chrisu02 said:
Hello,
The usb drive /SDCard has to be formatted FAT32 and the partition should not be larger than 32 GB.
On some models the devices do not boot from both USB ports (red and yellow) only one does work, try both.
Maybe it also helps do disconnect the car, and boot the device only from Power without the car.
Did you only get an OTA Update file or a complete OS image, can you upload it somwhere for check ?
sincerely Chri
Click to expand...
Click to collapse
Hi Chri,
thanks for your reply, i tried both usb cables, i used fat32 and the USB stick has 16GB the sd card 32gb, i also disconnected the battery.
i havent tried, if the device will boot when i disconnect the battery and put it back on without turning on the ignition. I will try this now.
Best Regards
Sven
I have both the PX6 image aprox. 800MB and the MCU as well
Edit: also dident work
maybe i wrote a little bit misunderstanding ^^"
i with disconnecting the car, i meant it different.
what i wanted to say is to only have power from the car or a powersupply connected to, normally the Unit does as soon as it got power.
another thing you can try it to disconnect the original navigation cable that goes to the android display, to enshure it will only have it`s own source.
does it show no image at all anymore ?
Do you have an USB A-A Cable to connect it to a computer to see if it will be found at all ?
Did you maybe have activated USB Debugging some time ?
i would be interrested in getting the files
sincerely Chri
Just to give you a feedback on this issue, i got a new PCB from the supplier.
My failure was, that i pressed intuitiv the false botton. "Update Config" instead of simply reboot