Question on SM P580 - Samsung Galaxy Tab A series Questions & Answers

My Samsung SM P580 was giving me problems recently, and I'm waiting for a new (non Samsung) tablet to arrive. I wanted to try to root my current one (which I've done before). Long story short, I installed older firmware, didn't like it, and reinstalled 8.0 successfully. Did I leave it there? NOOOOOO . . . I wanted to root it so I could use the sd card for internal storage (which is a separate song and dance as many of you know). I installed twrp, but must have clicked on a wrong setting. When I rebooted the tablet it always went straight into twrp. Only option from there: reboot. I did a hard shut down and plugged in the tablet for the night.
Today: I thought "hey, I can reinstall the firmware, hopefully that will fix the twrp issue" Heh heh . . . no. Using ODIN I reinstalled the 8.0 (which worked last time). It seemed to be hunky dorey, ODIN said it was successful, when I rebooted the tablet it gave me a message that it was updating. Then the Samsung Galaxy Tab A showed up . . . and the Samsung logo starting flashing. Awesome. It did that for a moment or two, the screen went blank. A moment or two later the Samsung Galaxy Tab A showed up again, followed by the logo. I let it do this for about 20 minutes, remembering the last time I rooted it took a few for things to settle in. Nothin. ODIN it again, this time I get a message stating an updating error occurred. This is where my tablet is now.
Only thing I could think of was that I messed around so much with firmware, that the tablet is filled with info and has no idea what to do. I can't use the twrp either, it won't come up. Any ideas on how to start from scratch with something like this? I had nothing important on the tablet, nothing backed up was needed. Thoughts?
UPDATE:
I was able to install twrp and boot into it. After doing a data wipe, I was going to attempt in install Lineage; I got everything on an SD card, put it in. Hit Install, Select Storage . . . the internal storage said zero. I considered rebooting it, but I got a warning that there was no OS installed, was I sure I wanted to reboot? I most certainly was not, and I didn't try to install the Lineage for fear of f****** that up too.

vstarjewel said:
My Samsung SM P580 was giving me problems recently, and I'm waiting for a new (non Samsung) tablet to arrive. I wanted to try to root my current one (which I've done before). Long story short, I installed older firmware, didn't like it, and reinstalled 8.0 successfully. Did I leave it there? NOOOOOO . . . I wanted to root it so I could use the sd card for internal storage (which is a separate song and dance as many of you know). I installed twrp, but must have clicked on a wrong setting. When I rebooted the tablet it always went straight into twrp. Only option from there: reboot. I did a hard shut down and plugged in the tablet for the night.
Today: I thought "hey, I can reinstall the firmware, hopefully that will fix the twrp issue" Heh heh . . . no. Using ODIN I reinstalled the 8.0 (which worked last time). It seemed to be hunky dorey, ODIN said it was successful, when I rebooted the tablet it gave me a message that it was updating. Then the Samsung Galaxy Tab A showed up . . . and the Samsung logo starting flashing. Awesome. It did that for a moment or two, the screen went blank. A moment or two later the Samsung Galaxy Tab A showed up again, followed by the logo. I let it do this for about 20 minutes, remembering the last time I rooted it took a few for things to settle in. Nothin. ODIN it again, this time I get a message stating an updating error occurred. This is where my tablet is now.
Only thing I could think of was that I messed around so much with firmware, that the tablet is filled with info and has no idea what to do. I can't use the twrp either, it won't come up. Any ideas on how to start from scratch with something like this? I had nothing important on the tablet, nothing backed up was needed. Thoughts?
UPDATE:
I was able to install twrp and boot into it. After doing a data wipe, I was going to attempt in install Lineage; I got everything on an SD card, put it in. Hit Install, Select Storage . . . the internal storage said zero. I considered rebooting it, but I got a warning that there was no OS installed, was I sure I wanted to reboot? I most certainly was not, and I didn't try to install the Lineage for fear of f****** that up too.
Click to expand...
Click to collapse
Maybe better to flash a recent stock Samsung firmware with Odin. At least to get it working again.

Related

[Q] Weirdest problem - flashing anythin thru ODIN does not change anything in my S4

Alright, So I bought a brand-new Galaxy S4 i-9500 a couple of weeks back. Ever since day one, the phone has major problems working with my Sandisk Class 10 64gb sdxc card, which I was using in my Galaxy Note N7000, without any problems. The card also works perfect in my wife's Galaxy S3 i9300.
The problems include:
-> The phone showing card as "Damaged" and not mounting it.
-> Sometimes it mounts the card, but shows the card as 'Blank' or 'Wrongly Formatted'
-> And yet sometimes, it mounts the card, but does not read some specific files. Opening those will give a message which says "File format not supported". In the process, the phone heats up to pretty nasty levels, and the battery drain will be massive. The phone also becomes very slow, gets stuck, and sometimes even restarts, and the problem keeps continuing.
If I remove the memory card, the phone works like a charm. I tried a 16gb memory card which also produced more or less the same results.
Now, the real problem is this. Recently, I had tried to root the phone, and for that purpose, I tried flashing CWM from cofface, through ODIN 3.07 and 1.85. Both the times, the flashing process was successful, with ODIN giving the green "PASS" message. However, nothing seemed to change on my phone, and CWM was never installed. I could never get the CWM screen no matter what I tried (every instruction on the net, literally). I then left the matter.
When my aforementioned card problem bothered me a lot, today, I decided to re-flash the stock firmware to my phone. So I downloaded the stock ROM from Sammobile, the correct pit file from XDA and started the flash process. Flashing was successful, as shown by ODIN, and the phone rebooted. But to my horror, the phone was exactly in the same state, when I had switched it off. Nothing was ever changed, all my files and everything were intact, and nothing had happened at all!!!!
How is this possible??? The bootloader shows "Downloading" and the blue bar while flashing, ODIN shows everything and even says it succeeded, but then how come things on my Phone remains absolutely unchanged??? So then what did it re-flash and where to?? And is there any way to get rid of this memory card problem??
I googled a lot to see if anyone else is experiencing the same problem as mine, but never found anything, which leads me to believe that my device is one weird thing!
vivz990 said:
Alright, So I bought a brand-new Galaxy S4 i-9500 a couple of weeks back. Ever since day one, the phone has major problems working with my Sandisk Class 10 64gb sdxc card, which I was using in my Galaxy Note N7000, without any problems. The card also works perfect in my wife's Galaxy S3 i9300.
The problems include:
-> The phone showing card as "Damaged" and not mounting it.
-> Sometimes it mounts the card, but shows the card as 'Blank' or 'Wrongly Formatted'
-> And yet sometimes, it mounts the card, but does not read some specific files. Opening those will give a message which says "File format not supported". In the process, the phone heats up to pretty nasty levels, and the battery drain will be massive. The phone also becomes very slow, gets stuck, and sometimes even restarts, and the problem keeps continuing.
If I remove the memory card, the phone works like a charm. I tried a 16gb memory card which also produced more or less the same results.
Now, the real problem is this. Recently, I had tried to root the phone, and for that purpose, I tried flashing CWM from cofface, through ODIN 3.07 and 1.85. Both the times, the flashing process was successful, with ODIN giving the green "PASS" message. However, nothing seemed to change on my phone, and CWM was never installed. I could never get the CWM screen no matter what I tried (every instruction on the net, literally). I then left the matter.
When my aforementioned card problem bothered me a lot, today, I decided to re-flash the stock firmware to my phone. So I downloaded the stock ROM from Sammobile, the correct pit file from XDA and started the flash process. Flashing was successful, as shown by ODIN, and the phone rebooted. But to my horror, the phone was exactly in the same state, when I had switched it off. Nothing was ever changed, all my files and everything were intact, and nothing had happened at all!!!!
How is this possible??? The bootloader shows "Downloading" and the blue bar while flashing, ODIN shows everything and even says it succeeded, but then how come things on my Phone remains absolutely unchanged??? So then what did it re-flash and where to?? And is there any way to get rid of this memory card problem??
I googled a lot to see if anyone else is experiencing the same problem as mine, but never found anything, which leads me to believe that my device is one weird thing!
Click to expand...
Click to collapse
Same problem for me... i wanted reinstall the stock firmware completely but when i flashed it with ODIN nothing happened...
Markz88 said:
Same problem for me... i wanted reinstall the stock firmware completely but when i flashed it with ODIN nothing happened...
Click to expand...
Click to collapse
Odin doesnt wipe your device or delete anything of your data...
If you flash the same firmware with your device firmware then nothing's really happened..
But if you root or change anything to system - boot - recovery - modem partition then simply is going again to stock or to the version you flash..
Thanks
Maybe there is something wrong with flashing memory (emmc).
There is an app on play store to check it, but i dont know if it works on s4.
I suggest to replace your phone. Or send it to service center
Edit: flash another different stock firmware, and check pda and csc if has changed
sent from my galaxy
vivz990 said:
Alright, So I bought a brand-new Galaxy S4 i-9500 a couple of weeks back. Ever since day one, the phone has major problems working with my Sandisk Class 10 64gb sdxc card, which I was using in my Galaxy Note N7000, without any problems. The card also works perfect in my wife's Galaxy S3 i9300.
The problems include:
-> The phone showing card as "Damaged" and not mounting it.
-> Sometimes it mounts the card, but shows the card as 'Blank' or 'Wrongly Formatted'
-> And yet sometimes, it mounts the card, but does not read some specific files. Opening those will give a message which says "File format not supported". In the process, the phone heats up to pretty nasty levels, and the battery drain will be massive. The phone also becomes very slow, gets stuck, and sometimes even restarts, and the problem keeps continuing.
If I remove the memory card, the phone works like a charm. I tried a 16gb memory card which also produced more or less the same results.
Now, the real problem is this. Recently, I had tried to root the phone, and for that purpose, I tried flashing CWM from cofface, through ODIN 3.07 and 1.85. Both the times, the flashing process was successful, with ODIN giving the green "PASS" message. However, nothing seemed to change on my phone, and CWM was never installed. I could never get the CWM screen no matter what I tried (every instruction on the net, literally). I then left the matter.
When my aforementioned card problem bothered me a lot, today, I decided to re-flash the stock firmware to my phone. So I downloaded the stock ROM from Sammobile, the correct pit file from XDA and started the flash process. Flashing was successful, as shown by ODIN, and the phone rebooted. But to my horror, the phone was exactly in the same state, when I had switched it off. Nothing was ever changed, all my files and everything were intact, and nothing had happened at all!!!!
How is this possible??? The bootloader shows "Downloading" and the blue bar while flashing, ODIN shows everything and even says it succeeded, but then how come things on my Phone remains absolutely unchanged??? So then what did it re-flash and where to?? And is there any way to get rid of this memory card problem??
I googled a lot to see if anyone else is experiencing the same problem as mine, but never found anything, which leads me to believe that my device is one weird thing!
Click to expand...
Click to collapse
go to this link....
http://forum.xda-developers.com/showthread.php?t=2219803
get rooted from here ( even if u are)
in the same page u get a link to flash back to stock recovery. get that flashed
boot into stock recovery and get a factory reset done.
pull battery and back in...
turn on ur phone into download mode and flash ur stock rom using odin....
this is how i got mine working.... i had ur similar issue....
kiwimalayalee said:
go to this link....
http://forum.xda-developers.com/showthread.php?t=2219803
get rooted from here ( even if u are)
in the same page u get a link to flash back to stock recovery. get that flashed
boot into stock recovery and get a factory reset done.
pull battery and back in...
turn on ur phone into download mode and flash ur stock rom using odin....
this is how i got mine working.... i had ur similar issue....
Click to expand...
Click to collapse
ok..will try this now...my last resort
vivz990 said:
ok..will try this now...my last resort
Click to expand...
Click to collapse
i assure u its gonna work perfectly...
I am literally having the same problem on my S4 I337M, I'm gonna try what was suggested on here, maybe it'll work lol
i have exactly the same problem right now, i searched for a solution and i found ur thread.
going through the thread to see a solution
vivz990 said:
ok..will try this now...my last resort
Click to expand...
Click to collapse
was ur problem solved after flashing cf-auto_root? i mean were u then able to flash custom recovery via odin?
Is solved?
vivz990 said:
... I decided to re-flash the stock firmware to my phone. So I downloaded the stock ROM from Sammobile, the correct pit file from XDA and started the flash process. Flashing was successful, as shown by ODIN, and the phone rebooted. But to my horror, the phone was exactly in the same state, when I had switched it off. Nothing was ever changed, all my files and everything were intact, and nothing had happened at all!!!!
How is this possible??? The bootloader shows "Downloading" and the blue bar while flashing, ODIN shows everything and even says it succeeded, but then how come things on my Phone remains absolutely unchanged??? So then what did it re-flash and where to?? And is there any way to get rid of this memory card problem??
I googled a lot to see if anyone else is experiencing the same problem as mine, but never found anything, which leads me to believe that my device is one weird thing!
Click to expand...
Click to collapse
OMG. I just experienced the EXACT same issue with a Galaxy Exhibit (MetroPCS) SGH-T599. I picked up this phone 2nd hand. It has Philz Touch v6.25 recovery already installed on it. But the phone is stuck in a boot loop. So I decided to flash the stock ROM, a custom ROM via ODIN and later even via flashable zips from the Philz recovery! I even tried to flash TWRP to replace Philz Touch thinking there was something wrong with Philz recovery.
No matter what I did, EVERY TIME, the phone remained in EXACTLY the same state, i.e., with Philz recovery still on there.
I have searched everywhere for the last 3 days including XDA but never found anyone else with the same ODIN flashing issue. Thank goodness I found your post. I'm reading the thread now looking for a solution.
I've noticed a couple other things beneath the surface. When I flashed a CM custom ROM for the phone, the default.prop indicated that there was a new system on the phone (I can access the phone via ADB and look at the files including the system files). It also appears the phone was rooted by the previous owner. Another thing I noticed is that some cases when I tried to install a custom ROM via the custom recovery, the phone would suddenly reboot just at the point the recovery attempts to write the ROM.
Yes, it is clear the phone is good and bricked. But how on earth to unbrick it if ODIN isn't actually changing ANYTHING on the phone and installing a ROM via Philz recovery changes little to nothing either.
CVAngelo said:
OMG. I just experienced the EXACT same issue with a Galaxy Exhibit (MetroPCS) SGH-T599. I picked up this phone 2nd hand. It has Philz Touch v6.25 recovery already installed on it. But the phone is stuck in a boot loop. So I decided to flash the stock ROM, a custom ROM via ODIN and later even via flashable zips from the Philz recovery! I even tried to flash TWRP to replace Philz Touch thinking there was something wrong with Philz recovery.
No matter what I did, EVERY TIME, the phone remained in EXACTLY the same state, i.e., with Philz recovery still on there.
I have searched everywhere for the last 3 days including XDA but never found anyone else with the same ODIN flashing issue. Thank goodness I found your post. I'm reading the thread now looking for a solution.
I've noticed a couple other things beneath the surface. When I flashed a CM custom ROM for the phone, the default.prop indicated that there was a new system on the phone (I can access the phone via ADB and look at the files including the system files). It also appears the phone was rooted by the previous owner. Another thing I noticed is that some cases when I tried to install a custom ROM via the custom recovery, the phone would suddenly reboot just at the point the recovery attempts to write the ROM.
Yes, it is clear the phone is good and bricked. But how on earth to unbrick it if ODIN isn't actually changing ANYTHING on the phone and installing a ROM via Philz recovery changes little to nothing either.
Click to expand...
Click to collapse
Totaly same problem with my Galaxy Note 10.1 (N8010). Tried flash stock ROM over Odin a totaly nothing changed. It is in bootloop everytime with totaly same Marshmallow logo, even if I flash stock ROM which is KitKat... Only sometime it boot to system where it say to me "Encryption unssucessfull" - WTF? i never have password, and when i click on something it just reboot to BootLoop...
I have TWRP recovery on it, but when i want to flash some ROM it flash it but nothing change... Maybe EMMC memory chip is death or I dont know...
Fellas, try on other PC/Laptop or reinstal Windows/Ubuntu whatever you use... That helped me..

[Q] Galaxy S4 won't boot past recovery (urgent)

This is somewhat urgent because I am leaving the country for two weeks on Friday, and need a working phone. I am not sure what happened today, but my Sprint Galaxy S4 (SPHL720TBK) wouldn't connect to WIFI at my house. My tablet would, so I know it was a phone issue. I rebooted then was going through settings, and just checking things. The phone rebooted itself, and when it came back up, it went through a couple of screens, one of which asked about activation. It seemed like it was installing an update from Sprint, which it had been trying to do for a week or so. But it kept failing, saying it didn't have enough space for the download, despite there being several GB free internally and on the SD card. (I figured it must be because it was rooted). After a couple of additional screens on which I could only answer OK, the phone rebooted again, and that was it. It would not boot again. I decided to power off the phone and deal with it tonight. I can boot into recovery, and connect with Odin. I can boot to recovery and connect with ADB (in sideload mode). I know I could just do a factory reset, but unfortunately, I do not have a full backup since the end of January, and I would rather not lose everything. The phone was running v 4.4.2. I had rooted the phone several months ago with CF Auto Root using CF-Auto-Root-jfltespr-jfltespr-sphl720.tar.md5, so it was essentially stock, but rooted. Is there anything I can do to get the phone back on its feet that will not lose everything? Or anyway to copy data from the phone with it in this state? Any assistance will be VERY much appreciated! Thanks!
Fixed it myself
andrewt2323 said:
This is somewhat urgent because I am leaving the country for two weeks on Friday, and need a working phone. I am not sure what happened today, but my Sprint Galaxy S4 (SPHL720TBK) wouldn't connect to WIFI at my house. My tablet would, so I know it was a phone issue. I rebooted then was going through settings, and just checking things. The phone rebooted itself, and when it came back up, it went through a couple of screens, one of which asked about activation. It seemed like it was installing an update from Sprint, which it had been trying to do for a week or so. But it kept failing, saying it didn't have enough space for the download, despite there being several GB free internally and on the SD card. (I figured it must be because it was rooted). After a couple of additional screens on which I could only answer OK, the phone rebooted again, and that was it. It would not boot again. I decided to power off the phone and deal with it tonight. I can boot into recovery, and connect with Odin. I can boot to recovery and connect with ADB (in sideload mode). I know I could just do a factory reset, but unfortunately, I do not have a full backup since the end of January, and I would rather not lose everything. The phone was running v 4.4.2. I had rooted the phone several months ago with CF Auto Root using CF-Auto-Root-jfltespr-jfltespr-sphl720.tar.md5, so it was essentially stock, but rooted. Is there anything I can do to get the phone back on its feet that will not lose everything? Or anyway to copy data from the phone with it in this state? Any assistance will be VERY much appreciated! Thanks!
Click to expand...
Click to collapse
Since I didn't spark enough interest for anyone to offer advice, had to spend most of the afternoon/evening fixing these problems myself. Everything seems to be working, so I thought I would pass along key parts of this hard-learned lesson in case anyone else finds himself in such a situation.
First I booted into adb sideload mode, which is all I could do anyway. I installed philz_touch_6.23.9-jflte.zip and the aromafm.zip. I was then able to boot into a "normal" recovery mode. Aromafm was troublesome, and I eventually had to manually put the zip into place for it to work consistently. These are both WONDERFUL , and I highly recommend them both. Thanks very much to the creators! I used the file manager to find the files that I didn't want to lose, and used ADB to pull the files over to my PC. (ADB pull <source> <target>) Then I did a full wipe and factory reset. That did little other than delete all my data, which I had already copied anyway. The phone still would not boot past recovery.
I tried to use ADB to install a new ROM, but got a variety of errors. My phone being an L720T, there are not many ROM's available, at least not for which I could find functioning links. I finally found a TAR, L720TVPUBNG5_L720TSPTBNG5_L720TVPUBNG5_HOME.tar.md5, and used ODIN v3.09 to install that.
I still need to go back and re-root the phone, and install lots of APPS and restore data, but at least I have a functioning phone, and I can do the rest on my plane ride tomorrow.
I found the information I needed in a variety of posts here on xda developers, and would not have been able to get through this without all the helpful advice posted to other threads. So thanks to all of you for the wealth of information available here!

Stuck in bootloop after un-installing Flipboard

I'm usually fairly good at troubleshooting my own stuff but this really has me stuck in the same place for a few hours now.
So basically Flipboard has been nagging me(well play store is, not the app itself but anyway) so I said to myself why don't I uninstall it since I've never used it and don't plan to, and besides I hate to have pointless apps installed. So I open TitaniumBackup and I see it is installed as a system app, I thought what's the worst that can happen? so I do uninstall it and a minute later my phone shuts off. I try to turn it on and it doesn't go past the Samsung Galaxy Note 4 flash screen, it either reboots or stays like that.
I try to go into recovery to restore a backup and I can't, it is stuck at Recovery Booting and again it either stays like that or reboots and does it again and again and again.
Now, I haven't made any changes or installs on my phone for weeks now, so this is either because I unistalled Flipboard(I know I shouldn't have risked it since it was a system app but I really could not see it going this way) or the hardware is on it's way out(don't see what else could it be).
I figured I should flash a stock rom with odin, I can get into download mode, and reinstall everything from scratch.
I took a stock image from xda and flashed it and it does exactly the same thing.
Right now I'm downloading another stock image from sammobile for my country/provider to see if this will change anything.
What else can I try? I'm completely stuck and I really don't want to send the phone back like this, I doubt amazon is gonna be happy about it.
Specs:
N910F
Emotion Revolution 12.1 Rom
POK1 BL&CP
TWRP 2.8.7.0
Really sorry for the double-post. I'm quite desperate and need my phone for work.
Since last post I've tried flashing N910FXXU1COH4_N910FH3G1COH3_H3G.zip through Odin from SamMobile and it did the same thing with rebooting constantly.
Then I've installed Kies and went to Tools -> Firmware Upgrade and Initialisation and gave it the model and S/N and it downloaded something and everything went all right, the phone reboots and I'm back in the same circle, it just shows me the splash screen(in some video's I've seen that after this procedure they get the splash screen and then the android bot with a progress bar, I don't get that, I only get the splash screen and reboot) and reboots.
I thought this was a last resort thing? Is the phone completely dead or is there something I can try?
Again sorry for the double-post.
Update: still no progress so I've contacted Amazon and they said to send it back so hopefully this works out in the end, no matter how annoying the waiting time will be, if you do have any suggestions on what I should try please let me know as I haven't posted the phone yet.

I think I softbricked, but only CM13 seems to fix on my N7. What did I do/how to fix

Guys,
I'm not even sure where to start with what I'm seeing, but maybe you can help me.
I have had Timur's ROM on my N7 2012 for a couple years. It's been crashing randomly, even though I have few things installed on it, and a good power supply. I took it out of my car and put it on an iPad 2 amp supply, and it still crashed a bunch so I knew I needed to wipe and reinstall. I also wanted to go from 4.2.2 to 5+, which I know takes away a lot of the good features I need (like power on/deep sleep).
I booted into TWRP and wiped my tablet, which appeared to softbrick it (I think I have the usage right from searching). I downloaded the Pure Nexus 6.0.1, CM13, and already had Autodroid ROMs to use. I tried to install Pure through ADB sideload, and got it installed. When I finished and tried to reboot, it said I had no OS. When I rebooted, I got the boot animation, and nothing else.
Long story short, I tried Autodroid and CM13, and using CM13 I got it back going. Unfortunately, every time I try to flash another ROM over it, it will no longer go past the boot screen. With CM13, it boots properly, but doesn't like the gapps pico I tried to install (error message when booted, keeps returning to the same pop up error).
I'm quite sure there's something I'm missing, but I don't know what it is.
Thanks!
Eric
Ok, before anyone goes nuclear on me, I think I better understand what happened. When I got ANYTHING to work, I stopped doing anything. As I understand, it wasn't functioning...it was just in a temporary mode of some sort.
After not being able to get it to work properly, I used this: http://forum.xda-developers.com/showthread.php?t=1781250 to try and restore the system. I followed all the directions, except for using the 5.1.1 version of the ROM, and used the corresponding file name for the zip file used.
After doing so, the bootloader won't go to TWRP, but goes to the pic as seen below. I did reboot the tablet, and after waiting quite a while, the tablet came on, but I don't understand what that picture means.
Thanks!
Eric
Ok...I realized that I lost root. I'm fixing it now. I had read before, but didn't understand what I saw.
Thanks,
Eric

Galaxy S4 GT-i9505 Install ROM loading issues. Help please

G'day all,
Hoping someone can help. (firstly I've searched on here over and over and some things have really helped, but can't find this issues on here)
Samsung Galaxy S4 GT-i9505 (originally with Vodafone rom)
Back story, I managed to put google rom via WINTEAM at some point in time (I don't recall how I did this now) this file - crdroid-6.0.0-20151208-jfltexx.zip (I still have this but not a md5 file)
Anyway, I wiped it under settings and basically stuffed it right up. Loops on WINTEAM (this part I had found in search and downloaded Odin3 v3.13) and Samsung Rom and a couple of others.
I9505XXUHOJ3_I9505VAUHOJ1_I9505XXUHOJ3_HOME.tar.md5
I9505XXUHQK1_I9505MAXHQK1_I9505XXUHQK1_HOME.tar.md5
I9505XXUHOL3_I9505TELHOL2_I9505XXUHOL3_HOME.tar.md5
CF-Auto-Root-jflte-jfltexx-gti9505.tar.md5
The last one actually fixed up the google install but was hoping to place the original Samsung ROM back on and now it doesn't help at all when I run again.
The top 3 are Vodafone, Telstra and Max a forum had suggested (from a page on here somewhere). All of these say pass in Odin3 when installing onto phone. But once it gets to the Samsung with what looks like dots shooting out from the word it never gets past this at all.
When I power up the S4 phone, to get to download screen. I have volume up to download or volume down to restart phone. Some places I've read say to select wipe, I don' t have this option at all.
I saw an option to install s8 rom to s4 which I would like to do, but the how to do that requires working software first and install TWRN or something like that.
I'm not sure if this will run fast or ok on this phone, but it isn't a MD5 file either.
I would like Samsung ROM back on as it (for me cleaner than google or maybe just what I've been used to). I'd like to give to my youngest child as their first phone.
I also had tried to place zip files and also unzipped files on the SD card on the phone, nothing worked for me as it looks like it is expected ODIN3 to work.
At this stage of the day, I would just like to have it functioning again with anything that works.
Any advice on what to do now would be greatly appreciated, also I'm truly sorry if this problem has been documented, I really did try to do my research first before putting this up here. I've been on this for weeks now
So quick update. through more research, I have managed to install TWRP and now have access to additional utilities through WINTEAM. I've now tried to install ROM through the Micro SD card.
I think it comes up with a mount error, but has rebooted and still stuck so can confirm just yet.
I've managed to go through the entire process of installing the PurifieD+ROM+v3.5.zip through the micro SD card in the phone. Asked me about all the options etc during the install. There didn't appear to be any errors at all. Asked to reboot. etc....
I even had sound on the bootup, Now I have the Samsung word on the main screen with a blue backlight just flashing. Been like that for nearly 10 minutes. Not looking good.
Have I got bad memory or am I doing something wrong?
I managed to do a wipe after I did an install and it booted up find. I had no WiFi but than installed the vodafone install that should be the original and all works now.
The amount of time I had been working on this, I really didn't think I was going to get it going. I honestly thought I had some hardware error going on.
In the end it runs now, I can setup and had to my child
so I've managed to now use several different ROMs but now I can't root the phone (it should be able to, has been before)
When I run Motochopper I get this error
error: only position independent executables (PIE) are supported.
Seems to happen no matter what rom I've installed. I can't seem to find an older rom running android version 5.01 now
Any help on how to root this. Would be great
Now says it has been rooted, but I do not get the teamwin boot menu option at all. more like just a text style menu for wiping and loading other roms.

Categories

Resources