Related
i tried these direction....below (did not mean to post this here )..i dont know what else to do
1. Install WP7 sdk Windows Phone Developer Tools;
2. Install zune;
3. Make partneship with zune and phone;
4. Attach the ChevronWP7.cer(you found in the toolkit) to your email and send the email to your email itself (On PC);
5. Login to your email account (On Phone), Open the email, Select attachment and install the cert;
6. Connect your phone to pc and make sure zune is running in background;
7. Run the unlocker (ChevronWP7.exe) and click unlock button(Make sure your phone date is set correctly)
(you need to close skype and disable network adapter.. hamachi.. wireless.. Dropbox.. etc)
6. Install toms .xap installer;
7. Deploy Connection Setup.xap, Touch Xplorer.xap and XBMODDeployer.xap (Install it on the phone and run XBMODDeployer.xap);
8. Copy the .provxml from the ringtons folder to the windows folder (on the phone using touch explorer app);
9. Run connection setup to install the .provxml;
10. Call Microsoft helpdesk and ask them an activating key for your hd2 (don't pm me for the key)
11. Setup up your live ID and enter the activation code (on the phone).
(also i tried these directions to ...below)
1 - Disable LAN card in your PC (Control Panel\Network and Internet\Network Connections\ right click on "Local Area Connection" and choose "disable"). It is very important to disable ALL connections, but you MUST remember which one is used for Internet access (see below, why).
2 - Do all the standard steps of unlock - install certificate, start WPConnect e.t.s. When Chevron fails to unlock - LEAVE IT OPEN.
3. Start Notepad and open hosts. Delete lines added by Chevron (at the bottom). Save. LEAVE NOTEPAD OPEN.
4. Press Win+R and enter IPConfig /flushdns , press "enter". CMD window will blink for a second - that's normal.
5. Press Win+R again (there will be IPConfig /flushdns typed already), but DO NOT PRESS "ENTER", just leave this window open.
6. Now the trick. Start WPConnect. WHILE it connects, continue to repeatedly press "Unlock" button in Chevron, until the black CMD window of WPconnect disappears. Chevron will fail to do its job, but that's in fact is the very thing we need.
7. Now, do not touch Chevron window, just return to Network Connections and ENABLE yor LAN card.
8. Go to Notepad and JUST CLICK "Save", do not alter anything inside.
9. Return to the window with the typed command IPConfig /flushdns . Press Enter.
10. Start WPConnect, WAIT until it disappears, and press "Unlock" button in Chevron. You're done - this time unlock would work
these r the third set of steps i took 9and nothing )
1. Have Winphone developer tools installed. Download it for yourself
2. Connect Phone via USB
3. Wait till zune starts and sync completes
4. Verify that zune is not in a guest relationship
5. open a command prompt, type netstat -a to confirm that port 443 is not being used
6. open an admin command prompt, navigate to c:\windows\system32\drivers\etc\ then type notepad hosts and delete any references to windowsphone developer services
7. go to the settings on the phone and turn airplane mode on (so that the phone is forced to use internet via zune)
8. While the phone is still on the settings page, run Chevron with admin privileges
post the list of steps u took.
may b u r not following some of the instructions..
i got my hd2 unlocked in 1st attempt. its a fairly straight forward method..
jus' relax n try again...
i just posted the steps i took and also i eve just tried hese steps (and still nothing )
1. Have Winphone developer tools installed. Download it for yourself
2. Connect Phone via USB
3. Wait till zune starts and sync completes
4. Verify that zune is not in a guest relationship
5. open a command prompt, type netstat -a to confirm that port 443 is not being used
6. open an admin command prompt, navigate to c:\windows\system32\drivers\etc\ then type notepad hosts and delete any references to windowsphone developer services
7. go to the settings on the phone and turn airplane mode on (so that the phone is forced to use internet via zune)
8. While the phone is still on the settings page, run Chevron with admin privileges
my way:
1-restart computer safe mode and login
2-restart again and login normaly
3-plug the phone-start zune-start ChevronWP7.cer and try unlock...
ı don't know why but its works for me
sorry for english
brianb2 said:
i just posted the steps i took and also i eve just tried hese steps (and still nothing )
1. Have Winphone developer tools installed. Download it for yourself
2. Connect Phone via USB
3. Wait till zune starts and sync completes
4. Verify that zune is not in a guest relationship
5. open a command prompt, type netstat -a to confirm that port 443 is not being used
6. open an admin command prompt, navigate to c:\windows\system32\drivers\etc\ then type notepad hosts and delete any references to windowsphone developer services
7. go to the settings on the phone and turn airplane mode on (so that the phone is forced to use internet via zune)
8. While the phone is still on the settings page, run Chevron with admin privileges
Click to expand...
Click to collapse
if u use skype shut it down, also turn temporary of all antiviruses and firewales...
it worked for me
I have been experiencing the same problem. What I have discovered is that after several attempts I have just left the chevron in the background without closing it after the last fail for around 10 minutes. After that I have just thought that it is worthed to give it a try and then suddenly was saying that the phone is unlocked and instead UNLOCK button there was just RELOCK button. Hope that this will help you. The only thing that I have shutdown was skype and the chevron was run with administrative rights.
I'm in the same trouble, the first time that i installed all work fine at 1st attemp, then the device was blocking itself and never more i can unlock again, i tried all method explained here an in other sites i reflashed the phone again, but nothing it seems that my phone is in a black list or something.
How to unbrick soft bricked Atrix, I installed http://www.youtube.com/watch?v=wQvrEH74dgI and when I installed Gapps, it didn't started and when I tryed system restore it did so but when it started it got stucked at "M" screen and nothing else is happning.
knotabs loca
manyelski said:
How to unbrick soft bricked Atrix, I installed http://www.youtube.com/watch?v=wQvrEH74dgI and when I installed Gapps, it didn't started and when I tryed system restore it did so but when it started it got stucked at "M" screen and nothing else is happning.
Click to expand...
Click to collapse
I'm in a similar situation. I was asked to use latest CWM. I happened to use Tenfar's CWM that came with the boot loader unlock.
I haven't tried it yet. Will give a shot this weekend
Hi!
I'd suggest the following:
1. Install ADB from the Android SDK.
2. Turn on Settings -> Applications -> Development -> USB Debugging.
3. Connect your phone to a computer. (If you do not have a cable, have it connect to the same local network.)
4. Select 'Motorola Phone Portal' as connection method.
5. Reboot while holding Vol. Down.
6. When you see 'Fastboot', tap Vol. Down until 'Early USB Enumeration' appears.
7. Press Vol. Up.
8. Go to a command line where your ADB executable is.
8a. If you have connected by network, find out your device's IP address and type adb connect <IP>
9. Type adb wait-for-device
10. Type adb logcat
Now, Android's system log should appear. Scroll up and carefully look for error messages - the cause for this could be widely different, I had the same problem with 'Error: ID mismatch' or something along those lines. It is likely that the application itself is the problem, and that uninstalling it will fix things. If you come to that conclusion from the log:
11. Terminate logcat (Ctrl+C, usually)
12. Type adb shell
13. Type cd /data/app
14. Type ls *gapps* (If that fails, type ls and look manually)
15. Take the file name for Gapps' .apk and type rm <filename>
16. Reboot
17. Rejoice
Sincerely,
V
PS: Will I always have to enter a captcha when posting, or is this just for noobs? I HATE captchas.
Intelensprotient said:
Hi!
I'd suggest the following:
1. Install ADB from the Android SDK.
2. Turn on Settings -> Applications -> Development -> USB Debugging.
3. Connect your phone to a computer. (If you do not have a cable, have it connect to the same local network.)
4. Select 'Motorola Phone Portal' as connection method.
5. Reboot while holding Vol. Down.
6. When you see 'Fastboot', tap Vol. Down until 'Early USB Enumeration' appears.
7. Press Vol. Up.
8. Go to a command line where your ADB executable is.
8a. If you have connected by network, find out your device's IP address and type adb connect <IP>
9. Type adb wait-for-device
10. Type adb logcat
Now, Android's system log should appear. Scroll up and carefully look for error messages - the cause for this could be widely different, I had the same problem with 'Error: ID mismatch' or something along those lines. It is likely that the application itself is the problem, and that uninstalling it will fix things. If you come to that conclusion from the log:
11. Terminate logcat (Ctrl+C, usually)
12. Type adb shell
13. Type cd /data/app
14. Type ls *gapps* (If that fails, type ls and look manually)
15. Take the file name for Gapps' .apk and type rm <filename>
16. Reboot
17. Rejoice
Sincerely,
V
PS: Will I always have to enter a captcha when posting, or is this just for noobs? I HATE captchas.
Click to expand...
Click to collapse
I can't turn on my phone, or DO ANYTHING with it, the only thing is that I get "M" screnn taht's all, if i want to turn it down I hae to do a battery poll.
Excactly, that's what Early Enumeration is for Usually, USB is loaded when the OS is up, I suppose - at least you can't normally connect with ADB during boot. However, with Early Enumeration set, you can connect while the phone is still booting and access every capability ADB or the shell is able to provide. (Granted, uninstalling the .apk in question with adb uninstall did not work for me, that's why I posted the manual approach, but that may have been an error on my side.)
I wonder if my issue is the same. Mine is stuck in a 'dual core' reboot over and over.. I can't get into recovery mode or anything. Sometimes I hate phones.
JeRrYFaR said:
I wonder if my issue is the same. Mine is stuck in a 'dual core' reboot over and over.. I can't get into recovery mode or anything. Sometimes I hate phones.
Click to expand...
Click to collapse
Mine is tha same
Stuck in mortorola unlocked boot screen
Intelensprotient said:
Hi!
I'd suggest the following:
1. Install ADB from the Android SDK.
2. Turn on Settings -> Applications -> Development -> USB Debugging.
3. Connect your phone to a computer. (If you do not have a cable, have it connect to the same local network.)
4. Select 'Motorola Phone Portal' as connection method.
5. Reboot while holding Vol. Down.
6. When you see 'Fastboot', tap Vol. Down until 'Early USB Enumeration' appears.
7. Press Vol. Up.
8. Go to a command line where your ADB executable is.
8a. If you have connected by network, find out your device's IP address and type adb connect <IP>
9. Type adb wait-for-device
10. Type adb logcat
Now, Android's system log should appear. Scroll up and carefully look for error messages - the cause for this could be widely different, I had the same problem with 'Error: ID mismatch' or something along those lines. It is likely that the application itself is the problem, and that uninstalling it will fix things. If you come to that conclusion from the log:
11. Terminate logcat (Ctrl+C, usually)
12. Type adb shell
13. Type cd /data/app
14. Type ls *gapps* (If that fails, type ls and look manually)
15. Take the file name for Gapps' .apk and type rm <filename>
16. Reboot
17. Rejoice
Sincerely,
V
PS: Will I always have to enter a captcha when posting, or is this just for noobs? I HATE captchas.
Click to expand...
Click to collapse
How do you find the device's IP address?
Confirmed Wind works on CM13(Marshmallow) Koodo D852.
Original thread (as far I can tell):
http://forum.xda-developers.com/cro...ad-progress-please-leave-im-updating-t2871269
Thanx & credits to
@olokos, @BlackSoulxxx and others for their hard work.
HOWEVER: I used 115868544 for 1877:RF_BC_CONFIG_I value - GSM(07,08,09,19,21) and WCDMA(22,23,25,26) where WCDMA(25) is for the extra US 1700 band. I also tried with adding WCDMA(50) Japan 1700 band, but the phone would take long to find Wind network, and would lock up when trying to manually set network operator on cellular network settings.
carlos1984 said:
1. Download this zip Google it as it's banned from xda for the ability of imei change
2. Extract it and install QPST from that zip
3. Open the caller app and type in *#*#8778#*#* (it should go off the screen after you type in the last symbol "*"
1. Remove all installed drivers.
2. Install LG United Mobile Driver
3. Enable debugging and install adb driver if it's not automatically installed.
4. Using adb issue the following commands on a separate line
Code:
.
• LGE Android for Diagnostics Port (COM*)
• LGE Android USB Serial Port (COM*)
Note: I only got LGE Android usb serial port
Click to expand...
Click to collapse
-never got step 3 to work, after you enter "setprop sys.usb.config diag,adb" (see below) the adb will exit and windows Device Manager will recognize new port which should be named "LGE AndroidNet USB Serial Port (COM*)" if it shows "LGE Modem USB Serial Port (COM*)" QPST will NOT work (you may need to update driver from LG United Mobile Driver folder)
5. Connect your phone to your PC
6. Open ADB console
7. Type in these commands:
Code:
adb shell
su
setprop sys.usb.config diag,adb
I do not know if you have to do the previous but I had to open hiddenmenu to get diag to work.
• AT&T: 3845#*850#
• Sprint: 5689#*990#
• T-Mobile: 3845#*851#
• Verizon Wireless: ##228378 (+ send)
• International Models: 3845#*855#
On my d852 I used 3845#*852#
Select port setting>diag settings>usb set for diag
Click to expand...
Click to collapse
-on my D852 the hidden menu did not work
14. Press start button and navigate to QPST -> QPST Configuration
15. Go back to device manager -> ports -> LGE Mobile USB Serial Port(Com*)
16. Find "COM*" in my case it was "COM4". It might be different for you.
17. In QPST Configuration click on "Add new port" and in "Port" type in your "COM*". In my case It's "COM4" in there. In Port label it could be anything u want. In my case I used a G3 so I typed IN "G3".
18. It should look like this now.
19. Navigate to QPST/bin and open RV_NV_Manager.exe
20. press on settings -> Comport and choose your COM port.
21. Press on file -> read from phone
22. Wait patiently until it is finished. Now pay attention!
23. Go to line 1877, click it and copy the decimal number on the right side of a programme. right click - copy
24. Go to the place where you extracted the zip from the first step and start mzTool
25. On the left side you will see "Input radix" - press decimal there.
26. On the right side you will see "RF BC CONFIG" paste your previously copied number from the RV_NV_Manager.exe there.
27. You will see now what bands are you able to use on the bottom of the app in "Bit information"
28. Switch tab to "Band Preference (NV Value)"
29. In there select all GSM bands and WCDMA bands. In my case (LG G3 D852) I selected all of GSM (07,08,19,21)and WCDMA(22,23,25,26,49). I wouldn't suggest you to do anyting else in here unless you know what you’re doing.
30. After you're done choosing what bands do you want - copy decimal number from the bottom right
31. Remove all commas from that number ( "," ) so it would be just a bunch of numbers without anything else. for me it was 562950069289344
32. Open RV_NV_Manager.exe from the point you left it (step 23) and paste your new number without commas "," there.
33. Press on write NV and then press on file ->write changed NV to the phone.
34. Open up the terminal emulator on your phone and write there this:
Code:
su
setprop persist.usb.eng 0
go back into hidden menu > Select port setting>data settings>usb set for data
35. Reboot the device and hope you'll have the reception. If you do, hooray!
36. Type in *#*#SERVICE#*#* (*#*#7378423#*#*) to see
I found this guide that helped.
https://forums.oneplus.net/threads/...-qualcomm-devices-oneplus-one-edition.193610/
Click to expand...
Click to collapse
Sounds interesting, dont you think
However this work that you mentioned here is almost nearly the same based on my original works that posted on XDA and quite famous.
So you should credit your friends who worked on this
d852 default value
any one got the default :RF_BC_CONFIG value before qpst
It should work on my LG G3A F410s? I want to enable 900 mhz band wcdma. If anyone knows how to do help me
heiitorxd said:
It should work on my LG G3A F410s? I want to enable 900 mhz band wcdma. If anyone knows how to do help me
Click to expand...
Click to collapse
Hello
It is possible to unlock WCDMA/UMTS BAND 900 on my LG G3 852 ?
To be safe, make a backup via TRWP of your EFS partition BEFORE you flash anything! If you're not rooted, do a nandroid backup via fastboot
Steps:
1) Set your stock dialer app as default
2) Download and install “Logkit+v1.0.apk”
3) Open dialer app and enter *#800#
Scroll down to Function Switch and then tick-mark the “VoLTE”, “VoWifi” and “VTSwitch”. Exit from app and reboot phone. Go to Settings->Wi-Fi & Network->Sim & Network->Sim 1 and enable “VoLTE” & “Wi-Fi Calling” options. Repeat step for SIM 2 if necessary. Reboot phone.
4)Download and install to PC “QPST_2.7.496” + “qud.win.1.1_installer_10061.1.zip”
5) Enable Developer options and “USB debugging”
6) Download and install “engineeringmode_V1.01.0.171117173719.25c8842-26.apk”
Open dialer app and enter *#801#
Set “Full-port switch” to ON
7) Connect your phone to PC via USB and allow USB debugging on phone
Run ADB as administrator (if you haven’t download and install to your PC)
In CMD:
ADB reboot ftm
You should see some Chinese characters on display
8) Go to Device manager. You should see two "IN2010" devices in "Other devices" section. You need device with PID "MI_00", in my case it's second one. You could check, who is MI_00: Right click on device, properties, Events tab (look at screenshot).
When you find correct device, right click "Update Drivers", "Let me pick from a list...", select "Ports (COM & LPT)", select "Manufacturer -> Qualcomn Incorporated, Model -> Qualcomm HS-USB Diagnostics 90B6"
9) In CMD:
ADB shell
setprop sys.usb.config diag,diag_mdm,qdss,qdss_mdm,serial_cdev,dpl,rmnet,adb
10) Run “as administrator” PDC from QPST package. Select “Qualcomm HS-USB WWAN Adapter 9091” from list. In some cases PDC can’t connect to your phone. There is a strange solution:
Run EFS explorer from QPST package “as administrator”, select device with filled "EFS" and "Banner" fields and connect to your phone. In the moment of connection PDC works as excepted. Listing of EFS explorer takes a lot time, but after successful connection PDC stops working again. Close EFS and repeat step to finish all following steps in PDC.
In PDC right click on "Oversea-Commercial_DS" and deactivate “Sub0” and “Sub1”
Click on “Oversea-Commercial_DS” again and click remove.
Select “India-VoLTE-Vodafone”, right click and SetSelectedConfig for both “Sub0” and “Sub1”. Then click Activate button. Close PDC.
11) Download and extract “Audio+codec+EVS+HD+.zip”
Run EFC explorer “as administrator” and connect to your phone if not done earlier.
Backup to PC “overideconfig” and “overideconfig_Subscription01” from “/efsprofiles/” folder.
Replace “overideconfig” and “overideconfig_Subscription01” from “Audio+codec+EVS+HD+.zip” package with “Discard” “Clean-Up Option”. (Right click on file, “copy Data File from PC..”)
12) In ADB:
ADB reboot
13) Install “com.oem.oemlogkit_1.0.200929184727.270d7d2-1.apk” to return stock logkit.
14) Open dialer app and enter *#801#
Set “Full-port switch” to OFF
15) Disable USB Debugging if necessary.
16) Set back your custom dialer if necessary.
That’s all. You have VoLTE/VoWiFi/ViLTE/EVS HD+ codec. Icons in dialer and curtain.
After update to latest version VoLTE was not working again. I think we should repeats this step after every update, until OnePlus (if) fixed this issue.
Hello.
Does the step 9 has to be done , becouse i cant get a connection with efs explorer. Its just blank. I ask becouse i have volte and vowifi activated but my phone wont turn automatic to vowifi when i get a wifi connection. i have to first turn off volte and reboot that the phone connects to vowifi
zorantoma
Hi. Do you have "Qualcomm HS-USB WWAN Adapter 9091" in windows device manager after "setprop sys.usb.config diag,serial_cdev,rmnet,adb" command in ADB Shell?
vip77 said:
To be safe, make a backup via TRWP of your EFS partition BEFORE you flash anything! If you're not rooted, do a nandroid backup via fastboot
Steps:
1) Set your stock dialer app as default
2) Download and install “Logkit+v1.0.apk”
3) Open dialer app and enter *#800#
Scroll down to Function Switch and then tick-mark the “VoLTE”, “VoWifi” and “VTSwitch”. Exit from app and reboot phone. Go to Settings->Wi-Fi & Network->Sim & Network->Sim 1 and enable “VoLTE” & “Wi-Fi Calling” options. Repeat step for SIM 2 if necessary. Reboot phone.
4)Download and install to PC “QPST_2.7.496” + “QUD.WIN.1.1+Installer-10037.3+Setup.zip”
5) Enable Developer options and “USB debugging”
6) Download and install “engineeringmode_V1.01.0.171117173719.25c8842-26.apk”
Open dialer app and enter *#801#
Set “Full-port switch” to ON
7) Connect your phone to PC via USB and allow USB debugging on phone
Run ADB as administrator (if you haven’t download and install to your PC)
In CMD:
ADB reboot ftm
ADB shell
setprop sys.usb.config diag,serial_cdev,rmnet,adb
You should see some Chinese characters on display
8) Run “as administrator” PDC from QPST package. Select “Qualcomm HS-USB WWAN Adapter 9091” from list. In some cases PDC can’t connect to your phone. There is a strange solution:
Run EFS explorer from QPST package “as administrator” and connect to your phone. In the moment of connection PDC works as excepted. Listing of EFS explorer takes a lot time, but after successful connection PDC stops working again. Close EFS and repeat step to finish all following steps.
In PDC right click on "Oversea-Commercial_DS" and deactivate “Sub0” and “Sub1”
Click on “Oversea-Commercial_DS” again and click remove.
Select “India-VoLTE-Vodafone”, right click and SetSelectedConfig for both “Sub0” and “Sub1”. Then click Activate button. Close PDC.
9) Download and extract “Audio+codec+EVS+HD+.zip”
Run EFC explorer “as administrator” and connect to your phone if not done earlier.
Backup to PC “overideconfig” and “overideconfig_Subscription01” from “/efsprofiles/” folder.
Replace “overideconfig” and “overideconfig_Subscription01” from “Audio+codec+EVS+HD+.zip” package with “Discard” “Clean-Up Option”. (Right click on file, “copy Data File from PC..”)
10) In ADB:
ADB reboot
11) Install “com.oem.oemlogkit_1.0.200929184727.270d7d2-1.apk” to return stock logkit.
12) Open dialer app and enter *#801#
Set “Full-port switch” to OFF
13) Disable USB Debugging if necessary.
14) Set back your custom dialer if necessary.
That’s all. You have VoLTE/VoWiFi/ViLTE/EVS HD+ codec. Icons in dialer and curtain.
View attachment 5202729View attachment 5202731View attachment 5202727View attachment 5202725
Click to expand...
Click to collapse
hi i have a problem, i can't connect my op8 to efs file explore, it tells me it is not supported
Hi,
patonovich
Same question. Do you have "Qualcomm HS-USB WWAN Adapter 9091" in windows device manager after "setprop sys.usb.config diag,serial_cdev,rmnet,adb" command in ADB Shell?
Also, what Build number and Model you have? Attach screenshot
vip77 said:
Hi,
patonovich
Same question. Do you have "Qualcomm HS-USB WWAN Adapter 9091" in windows device manager after "setprop sys.usb.config diag,serial_cdev,rmnet,adb" command in ADB Shell?
Also, what Build number and Model you have? Attach screenshot
Click to expand...
Click to collapse
Yes Qualcomm appears, I could change the data with pdc, but i can't copying the files, it tells me that the cell phone is not compatible, sorry my English google translator
this is what i get when i run efs explorer
patonovich said:
Yes Qualcomm appears, I could change the data with pdc, but i can't copying the files, it tells me that the cell phone is not compatible, sorry my English google translator
Click to expand...
Click to collapse
zorantoma said:
this is what i get when i run efs explorer
Click to expand...
Click to collapse
Ok, folks. I checked again on clean device and latest version OS 11.0.4.4.IN21AA. there are some changes.
It's seems like QPST need COM device to communicate.
Disconnect your phone.
Update Qualcom driver to newer version (download in attachments 1st post section).
Connect your phone.
After "ADB reboot ftm" command BEFORE entering shell and "setprop sys.usb.config diag,serial_cdev,rmnet,adb" (look at updated command) :
Go to Device manager. You should see two "IN2010" devices in "Other devices" section. You need device with PID "MI_00", in my case it's second one. You could check, who is MI_00: Right click on device, properties, Events tab (look at screenshot).
When you find correct device, right click "Update Drivers", "Let me pick from a list...", select "Ports (COM & LPT)", select "Manufacturer -> Qualcomn Incorporated, Model -> Qualcomm HS-USB Diagnostics 90B6". After that, enter to ADB shell and use command "setprop sys.usb.config diag,diag_mdm,qdss,qdss_mdm,serial_cdev,dpl,rmnet,adb" (edited). You should see your phone in EFS Eplorer and able to connect (select device with filled "EFS" and "Banner" fields. look at screenshot).
After update to latest version VoLTE was not working again. I think we should repeat this steps after every update, until OnePlus (if) fixed this issue.
vip77 said:
Ok, folks. I checked again on clean device and latest version OS 11.0.4.4.IN21AA. there are some changes.
It's seems like QPST need COM device to communicate.
Disconnect your phone.
Update Qualcom driver to newer version (download in attachments 1st post section).
Connect your phone.
After "ADB reboot ftm" command BEFORE entering shell and "setprop sys.usb.config diag,serial_cdev,rmnet,adb" (look at updated command) :
Go to Device manager. You should see two "IN2010" devices in "Other devices" section. You need device with PID "MI_00", in my case it's second one. You could check, who is MI_00: Right click on device, properties, Events tab (look at screenshot).
When you find correct device, right click "Update Drivers", "Let me pick from a list...", select "Ports (COM & LPT)", select "Manufacturer -> Qualcomn Incorporated, Model -> Qualcomm HS-USB Diagnostics 90B6". After that, enter to ADB shell and use command "setprop sys.usb.config diag,diag_mdm,qdss,qdss_mdm,serial_cdev,dpl,rmnet,adb" (edited). You should see your phone in EFS Eplorer and able to connect (select device with filled "EFS" and "Banner" fields. look at screenshot).
After update to latest version VoLTE was not working again. I think we should repeat this steps after every update, until OnePlus (if) fixed this issue.
Click to expand...
Click to collapse
WOW thanks
patonovich said:
WOW thanks
Click to expand...
Click to collapse
Please report if everything went well. Good luck.
del
Thank you, it worked.
BR
Working great on OP8T,
Before this guide the Volte profile was change to the default oversea profile.
Thanl you.
UPDATE -
for some reason the OVERSEA profile is active , and volte is lost.
after that i change overideconfig files to Read only after
i copy the file to efsprofiles ,
its work for now for two days in row ,
before that the phone change to ovesea profile in half day.
not working :/
i tried exactly this and not working op8t
Grigiac said:
not working :/
i tried exactly this and not working op8t
Click to expand...
Click to collapse
What exactly "not working" which step?
vip77 said:
What exactly "not working" which step?
Click to expand...
Click to collapse
I performed all the steps without error
At the end when I restart the device via ADB, I just do not have a volte symbol..
i tried to return to PDC to see if its still active on india sub 0 +1 and its active
but still dont have VOLTE
my device kb2000 opt8t
Grigiac said:
I performed all the steps without error
At the end when I restart the device via ADB, I just do not have a volte symbol..
i tried to return to PDC to see if its still active on india sub 0 +1 and its active
but still dont have VOLTE
my device kb2000 opt8t
Click to expand...
Click to collapse
Do you have VOLTE supported and activated by carrier? Be sure using Sim slot 1 also.
vip77 said:
Do you have VOLTE supported and activated by carrier? Be sure using Sim slot 1 also.
Click to expand...
Click to collapse
yes, i did it with pdc on my last device op6 with other guide and work great
but now i have new device and tried with this guide..
and im using slot 1
i have no idea why its not working :/
Grigiac said:
I performed all the steps without error
At the end when I restart the device via ADB, I just do not have a volte symbol..
i tried to return to PDC to see if its still active on india sub 0 +1 and its active
but still dont have VOLTE
my device kb2000 opt8t
Click to expand...
Click to collapse
On which country are you?
Dreamelba said:
On which country are you?
Click to expand...
Click to collapse
Israel
tried India & telfonica uk
Nothing work
Hi,
I've recently upgraded my phone from version 11.0.4.4 to 11.0.5.5 and after upgrade all my modem configs were reverted to the default ones. I was not able to use VoLTE & VoWIFI as before.
Previous guides to run PDC tool didn't want to work on my unit, but after several hours, I've managed to solve how to do this. I'm sharing my method to all who has similar problems.
All the files for procedure are attached to the thread (use GUIDE ONEPLUS8 PDF) to see the procedure with screenshots. There is also guide how to root phone but it's not mandatory for VoLTE, VoWIFI change.
For POLAND PLAY VoLTE & VoWIFI choose DT_COMMERCIAL instead of PLAY_COMMERCIAL
VOLTE & VOWIFI – ACTIVATION & MODEM CHANGE
1. Enable USB debugging and have adb android shell installed
2. Upload to APK from tools folder to phone directory called Download
com.android.engineeringmode_V1.01.0.171117173719.25c8842-26_minAPI26(nodpi)_apkmirror.com.apk
com.oem.oemlogkit_1.0-1.apk
3. Find the apps and install
4. Type code on your phone *#800#
5. Don’t choose any app, stay in OnePlusLogKit
[GUIDE] Magisk for OxygenOS 11
Instructions - Download the magisk_patched.img - Reboot your device in bootloader-fastboot mode - Flash the patched_boot.img in the boot partition: fastboot flash boot boot.img replace "boot.img" with the magisk_patched.img path However, it...
forum.xda-developers.com
6. Go to Function Switch and enable (each time phone reboots)
a. VoLTE switch
b. VoWifi switch
c. VT switch
7. Go to your SIM Card in Settings and enable VoLTE and VoWIFI
8. Install QUD.WIN and QPST from the tools folder on Windows
9. Open CMD
# cd C:/adb
# adb reboot ftm
(this would turn off phone in development mode)
# adb shell
# setprop sys.usb.config diag,serial_cdev,rmnet,adb
(this enables diagnostic port needed for PDC)
10. Open Device Manager in Windows
11. Look for device IN20AA without driver – in the details find one with identifier MM_00 (there will be 3 same names but different identifiers)
12. Pick driver manually from file qqwan0.inf
13. Choose manually Qualcomm HS-USB WWAN adapter and adapt
14. There is gonna both devices visible in the Device Manager after few refreshes
a. Qualcomm HS-USB WWAN adapter
b. Qualcomm HS-USB WWAN adapter 9091
15. Try PDC with WWAN adapter 9091 if it’s working
16. If not, Unplug & plug the device (don’t write once more setprop, just plug it back)
17. In the Device Manager in Windows, delete Qualcomm HS-USB WWAN adapter but leave Qualcomm HS-USB WWAN adapter 9091
18. Open PDC once again and choose the only left Qualcomm HS-USB WWAN adapter 9091
19. The list of configs will be loaded
20. To change the modem config choose desired config ex. Commercial DT_POLAND (OLD ROW_COMMERCIAL NOT WORKING) – choose name, right click, select SUB0, SUB1 and click ACTIVATE. Check if in the row of your new modem config in SUB0 and SUB1 you have active setting
NOTE# For PLAY PL 260-06: DT Poland Commercial has VoLTE & VoWIFI
21. Close PDC. In cmd type command and reboot phone
# adb shell
Oneplus8$ reboot
NOTE!!! PDC MODEM SETTINGS MAY REVERT ONCE YOU TAKE THE SIM CARD OUT OF TRAY. YOU NEED TO MAKE THE CHANGE AGAIN TO DESIRED MODEM CONFIG.
#############################
CHANGE CARRIER POLICIES (UNLOCK BANDS)
Prerequisite is to have engineer apk installed.
1. Plug the phone into PC and dial *#801#
2. Turn on the Engineer Mode Toogle only
BASED ON: https://mt-tech.fi/en/modify-oneplus-7-pro-5g-8-and-8-pro-nr-lte-a-band-combos/
You have to install diag-driver manually if you have Android 11 installed. Check in Device Manager after enabled Engineer Toggle and connected USB to your computer you see two Unknown device labeled your phone model number. I have IN2013 (OnePlus 8 Europe).
Unknown devices in Device Manager
• Download Qualcomm diag-drivers and extract compressed zip-file.
• Right click the device and select Update driver.
• Select Browse my computer for drivers
• Select Let me pick from a list of available drivers on my computer.
• Select All devices.
• Browse drivers in extracted Qualcomm Drivers zip and find qmdm.inf
• Then find Qualcomm HS-USB MDM Diagnostics 90B6 and click Next to install it. You may get warning because hardware id doesn’t match. This driver still works fine.
• Now install same driver to second unknown devices (IN2013 if you have same model).
3. Now you should have driver installed to both interfaces.
4. Open QPST Configuration, Wait for Phone list in the window
5. Then go to Start Clients > QPST EFS EXPLORER
6. It will list all the QUALCOMM directories. Go to policyman directory
7. Copy the carrier_policy.xml (SIM1), carrier_policy.xml_Subscription01(SIM2) and lte_feature_restrictions
8. Modify files accordingly:
Modify OnePlus 7 Pro 5G, 8 and 8 Pro, 9 and 9 Pro NR/LTE-A band combos - MT-TECH.FI
On this instruction we will modify OnePlus 7 Pro 5G, 8 and 8 Pro band combo profiles with Qualcomm software. OnePlus has limited 5G access and 4G+/LTE+ Carrier Aggregation combinations and this instruction help you to unlock. However this instruction doesn’t unlock hardware defined combinations...
mt-tech.fi
or overwrite in QPST files with the modified files for PLMN 26066 with 5G and DSS enabled from folder on Onedrive called policyman (modified)
9. Reboot the phone
10. Dial in *#*#4636#*#*
11. Choose Phone
12. Choose Band config NR/LTE/TDSCDMA/GSM/WCDMA
Now it should work with all 5G bands regardless of some restrictions for not supported PLMNS
thanks. worked like a charm
thanks but after read the guide i think its to hard for me to do.
anyone have easyer method ?
after flash RadioActive kernel i lost VoLTE. (OOS 11.0.9.9.IN11AA)
I was unable to install any of the log kit provided. error given was ' conflicts with an existing package'. Any help?
momiloco said:
I was unable to install any of the log kit provided. error given was ' conflicts with an existing package'. Any help?
Click to expand...
Click to collapse
This is for OOS 11 Android 11
In A12 not is possible install logkit.
any idea what we can do in A12?