Related
i cannot install any official or unofficial android because always when i try to update to official android i get update failed at 96%.
maybe there is something missing in my phone partitions.in linux i can acces to 3 partitions from pink screen.
files in 136 mb filesystem are dalvik-cache(empty file),download(empty file),lost+found(locked file;cannot enter),recovery
screenshots in attachment
please help me!
No questions in development section. Ask from general section.
Try to update the phone without battery and cord plugged in charger.
Sent from my u8800
It might take a little longer to get an answer in general but questions need to go there as Maksimitoisto already said. Just so the dev forum doesn't get flooded with questions.
You're most likely to receive a helpful answer to your question if you use a short subject title that describes your problem ....
katu2006 said:
I don't think your phone is bricked.
During the installation of the Stock Roms the recovery.img and boot.img files get replaced/modified and that's why your phone gets stuck at the Huawei logo.
Try the following:
Boot the phone in Bootloader (pink screen) by holding Vol+, Vol- and Power, format the partition with FAT32, create a folder called "image" and copy the following files on there.
EMMCBOOT - http://www.mediafire.com/?lb6ifvgk72iru4a
AMSS.MBN - http://www.mediafire.com/?d6r45q6p5gew59v
Recovery.img - http://www.mediafire.com/?57njygc8oianjac
Boot.img - http://www.mediafire.com/?6d5i0714a7o9z97
Once the files are copied, just disconnect the USB cable and remove the battery. Then boot into Recovery by pressing the Vol+ and Power. If you manage to get into CWM Recovery, then it's all good, you can install a custom Rom like Oxygen (
https://sourceforge.net/projects/u8800oxygen/files/ ) by selecting "install zip from SD Card" option.
You'll probably have to use the MOUNT functions within the Recovery to transfer the Oxygen.zip file to your root folder of the SD Card.
Click to expand...
Click to collapse
Po Slovensko Pritisni obe tipki za glasnost, da dobiš roza zaslon (moraš imeti prazno SD kartico v telefonu, da sploh lahko prideš v bootloader). Potem v mapo "image" (jo že imaš) skopiraj datoteke iz zgornjega posta. Tako bi moral dobit reovery in lahko flash-aš custom ROM. Ko boš imel custom ROM delujoč lahko update-aš na offcial 2.3.5 in nadaljuješ...
negre instalirat niti 2.2.2 nic.
vedno faila pri koncu na 96%.
Tudi če prek CWM recovery-ja inšatliraš custom ROM? (http://forum.xda-developers.com/showthread.php?t=1068766)
Sorry I can't help,
but props. for using Ubuntu! lol
Good luck.
yannn007 said:
Tudi če prek CWM recovery-ja inšatliraš custom ROM? (http://forum.xda-developers.com/showthread.php?t=1068766)
Click to expand...
Click to collapse
ne samo huawei logo mi kaže in se nič ne zgodi.
če pa stisnem kateri touch gumbek pa me telefon zavibrira malo.
Ampak v recovery pa lahko prideš (al tud do sem nemorš)? Si zamenjal image file z tistimi iz linka?
Drugače pa lahko neseš telfon na teleray. Jaz sem ga brickal (totalen brick, tudi do bootloaderja nisem mogel) pa so mi priznali garancijo in zamnjali matično - narejeno v enem dnevu.
yannn007 said:
Ampak v recovery pa lahko prideš (al tud do sem nemorš)? Si zamenjal image file z tistimi iz linka?
Drugače pa lahko neseš telfon na teleray. Jaz sem ga brickal (totalen brick, tudi do bootloaderja nisem mogel) pa so mi priznali garancijo in zamnjali matično - narejeno v enem dnevu.
Click to expand...
Click to collapse
v recovery lahko pridem.bom videl če bom lahko popravil, če pa nebo šlo pa ga bom nesel na teleray.
kje pa je teleray?
Torej se ti inšatlacija ustavi pri 96% tudi, ko iz recoveryja inštaliraš custom ROM? Ko si v recovery naredi wipe data, wipe cache, wipe dalvik cache(pod advanced). Potem pa inštaliraj cyanogena (z .32 kernelom). Če to ne gre potem lahko probaš spez vse wipe in z dload metode inštalirat official 2.2 ROM.
Za teleray mislim da je Riharjeva 26, Ljubljana ampak poglej na nihovo spletno stran za vsak slučaj
yannn007 said:
Torej se ti inšatlacija ustavi pri 96% tudi, ko iz recoveryja inštaliraš custom ROM? Ko si v recovery naredi wipe data, wipe cache, wipe dalvik cache(pod advanced). Potem pa inštaliraj cyanogena (z .32 kernelom). Če to ne gre potem lahko probaš spez vse wipe in z dload metode inštalirat official 2.2 ROM.
Za teleray mislim da je Riharjeva 26, Ljubljana ampak poglej na nihovo spletno stran za vsak slučaj
Click to expand...
Click to collapse
instalacija se mi ustavi na 96% samo ko sprobam instalirati orginalen android, ko pa instaliram iz recoverya pa gre vse do konca instalirat samo telefon ostane pri huawei logo.v recoveryu nemorem dat wipe dalvik cache, vse ostalo pa gre.
Kater recovery pa imaš? Image file si zamenjal z tistimi iz linka?
imam recovery 4.0.1.5. sem zamenjal image file iz linka
Potem ti pa neznam več pomagat... Pomojem ti ostane samo še to, da ga neseš na servis in rečeš, da vedno ko ga hočeš updatat se ti ustavi na 96% (nič govorit o custom Romih, rootanju... )
evo sem ga nesel na servis.upam da bom hitro dobil telefon nazaj.sedaj imam nadomestnega LG-ja.
4. Use the English language.
We understand that with all the different nationalities not everyone speaks English well, but please try. If you're really unable to post in English use an online translator, You're free to include your original message in your own language below the English translation.
Click to expand...
Click to collapse
It's time to port Lollipop for our phone.
First of all. I'm not a developer. I'm just a Computer Teacher. And i have some skills about linux and android.This project will be an educational for me too.
Fİrst of all, all thanks to feroxxx and Ravikirancg for helps
And there is a beta version. watch it
Here is the link with feroxxx's words
Hi guys,
i'm sharing Omnirom 5.1 with you. This rom is not stable but you can use it if you don't mind camera. we know what is working and not working .
please dont write again and again same errors.
how to flash rom:
1.flash our twrp 2.8.7.0 recovery (linked below)
2.make a full backup
3.make a full wipe (exclude sdcard)
4.then flash omnirom 5.1 zip
5.reboot system
wait a bit and now taste a bit lollipop
A suggestion from me: Dont forget to take backup for your stock rom and omnirom seperatly. with this you can easily back to your stock rom and back again to omni.
Download Link: https://www.androidfilehost.com/?w=files&flid=34248
TWRP Recovery 2.8.7.0 : https://drive.google.com/file/d/0B02cvSUYp8r1YVNvLU0xVTdtRG8/view?usp=sharing
Please use twrp 2.8.7.0 otherwise you will get errors that i cant solve.
Not Works:
-Camera
XDA:DevDB Information
Discovery Elite 32Gb and Elife E7 Unofficial Omnirom 5.1.1, ROM for the GiONEE Elife E7
Contributors
mkursadulusoy, Ravikirancg, feroxxx, MertUslu
Source Code: https://github.com/feroxx/
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.4.x
Based On: Omnirom
Version Information
Status: Beta
Created 2015-01-22
Last Updated 2015-12-06
Reserved
@Ravikirancg
I would like to ask you that whether uve seen the kernel source or not...its not complete. ravikiran was trying to get the kernel working and got few success on booting it. So i think first of all we should try getting the kernel source working.
GTARaja said:
I would like to ask you that whether uve seen the kernel source or not...its not complete. ravikiran was trying to get the kernel working and got few success on booting it. So i think first of all we should try getting the kernel source working.
Click to expand...
Click to collapse
about this subject. we will work with Ravikirancg about this. now i'm comparing elite and e7 kernels. so we can start test it. and of course we will release a test version.
I'm interested in helping in this project, the thing is that I do not have any previous experience in CM porting or android kernel building.
Do you have any links/documentation for how to do that? what will be of a great help if there is some high level overview of the activities, something like a road map, for example, we need to have the kernel sources, then we need to compile it, then what? I mean, something to lay out the milestones so we can seek for closure.
I've noticed that Sony Xperia Z2 (CM code name Sirius) is very close in terms of HW specs to E7, can that be leveraged for the sake of this effort?
Please let me know how I can help as I have he interest and time.
-T
Lollipop Project
Is there any progress Lollipop Project for Gionne Elife E7 ?
kernel
About building kernel i wanna point out tha kernel does seem to work just that it doesn't have display drivers I tried xperia z1 KitKat and that shows sign of booting but no display
Our best shot is with one plus one i guess. anyway i will be back trying again after 8th to get some kernel working. As it seems ravikiran and GTAraja is back too. Maybe we can finally get some Cyanogenmod goodness
dhirajranger said:
About building kernel i wanna point out tha kernel does seem to work just that it doesn't have display drivers I tried xperia z1 KitKat and that shows sign of booting but no display
Our best shot is with one plus one i guess. anyway i will be back trying again after 8th to get some kernel working. As it seems ravikiran and GTAraja is back too. Maybe we can finally get some Cyanogenmod goodness
Click to expand...
Click to collapse
just ask some good devs to build a bootable kernel for us..
Oneplus One devs could surely help us here because they both use the same size display from same manufacture JDI
some devs who could help us..
http://forum.xda-developers.com/oneplus-one/orig-development/kernel-franco-kernel-r1-t2800871
http://forum.xda-developers.com/one...ernel-boeffla-kernel-1-0-2-0-beta-09-t2899974
http://forum.xda-developers.com/oneplus-one/orig-development/kernel-green-machine-v1-0-0-t2979540
http://forum.xda-developers.com/one...ent/kernel-furnace-1-0-0-oneplus-one-t2817651
http://forum.xda-developers.com/one...naro-optimized-franco-kernel-o3-aosp-t2861919
seriously gionee should just release the proper sources of the device..
i wrote all of this developers. i hope they will help us.
Kardeşim lollipop yaparsan süpersin var ya. Bende s4 var. Lollipop kullanıyorum. Çok beğendim. fakat arkadaşımda olduğu için yazıyorum. Gm kitkat için söz verdi temmuz 2014te fakat alt modeli discovery için bile verdi elite e vermedi. İnşallah romu yapabilirsin. Tanıdığım iyi arkadaşlar var . İngilizcen iyiyse sana çok yardımcı olurlar. @alemtro @AL_IRAQI @citymen34
Citymen34 özcan romu yapan bir Türk. Zamanları varsa sana yardımcı olurlar. Rom hakkında çok geniş bilgiye sahipler. Onların yaptıkları romları kullanıyorum.
---------- Post added at 10:35 PM ---------- Previous post was at 10:29 PM ----------
Ayrıca da recovery olarak philz, yükleyici olarak aroma installer kullanabilirsin
@mkursadulusoy
Kitkat ile kernel değişebilir. İstersen Kitkat update geldikten sonra o kernel üzerinde çalışmaya başla.
Elimizden geldiğince dilimizin döndüğünce yardım etmeye hazırım.
facebook.com/HotTouchBaby
MertUslu said:
@mkursadulusoy
Kitkat ile kernel değişebilir. İstersen Kitkat update geldikten sonra o kernel üzerinde çalışmaya başla.
Elimizden geldiğince dilimizin döndüğünce yardım etmeye hazırım.
facebook.com/HotTouchBaby
Click to expand...
Click to collapse
değişse bile yenisini paylaşacak mı gm bizimle? veya kurulu işletim sisteminden kernel i ayıklayabilecek miyiz?
mkursadulusoy said:
değişse bile yenisini paylaşacak mı gm bizimle? veya kurulu işletim sisteminden kernel i ayıklayabilecek miyiz?
Click to expand...
Click to collapse
Stock kerneli aldığımız gibi imaj olarak alabiliriz ama cihazdan ama romdan.
MertUslu said:
Stock kerneli aldığımız gibi imaj olarak alabiliriz ama cihazdan ama romdan.
Click to expand...
Click to collapse
kerneli almadık biz. kerneli burakgoncu diye birisi paylaştı sadece. o paylaşmadan önce yoktu elimizde.
one plus one kernel working
guys i have a good news probably I flashed a kernel made for one plus one the phone boots and goes into recovery. i cant get cm working due to system partition of stock rom being different. can anybody help ?
and kindly use English it is in the forum rules. everybody wants to know what you were talking about
in this situation you must send us a log so we can look at it and say whats wrong. about messages in turkish. a friend sai to me: we are waiting for kitkat update and then they will update the kernel. so you can get this kernel and work on it.
mkursadulusoy said:
in this situation you must send us a log so we can look at it and say whats wrong. about messages in turkish. a friend sai to me: we are waiting for kitkat update and then they will update the kernel. so you can get this kernel and work on it.
Click to expand...
Click to collapse
hi sorry for not posting logs actually twrp is not letting me copy logs every time i copy logs to sd-card the file is empty. Anyway there are only two errors
1. unable to execute update binary
2. unable to mount system
i think we need to build cm12 from one plus one source hoping that stock cm12/11 of one plus one would work directly was too much i guess. but kernel boots and display works means we can use one plus sources right?
dhirajranger said:
hi sorry for not posting logs actually twrp is not letting me copy logs every time i copy logs to sd-card the file is empty. Anyway there are only two errors
1. unable to execute update binary
2. unable to mount system
i think we need to build cm12 from one plus one source hoping that stock cm12/11 of one plus one would work directly was too much i guess. but kernel boots and display works means we can use one plus sources right?
Click to expand...
Click to collapse
its hard to say. it can be a yes or no. display problem is oone of our our problems. its workiing ok. but. opo uses snapdragon 801 and we use 800. opo have 16/64 gb and we have 16/32. so hoping to directly work is so far from us. but of course we can use some fatures from opo.
mkursadulusoy said:
kerneli almadık biz. kerneli burakgoncu diye birisi paylaştı sadece. o paylaşmadan önce yoktu elimizde.
Click to expand...
Click to collapse
Burak Göncü .. Neyse sen şuan ne kadar ilerleyebildin detaylı olarak anlatsan yaptığın işlemleri eksik olanları söylersen belki yardımım dokunabilir.
I bought a cheap 8227L based device running android 10
(correction it's android 6 with a few strings replaced so it looks like Android 10 at first glance, dispute already in progress)
So far so good, still quite a bit of bang for a few bucks (minus the fraud) ...
Board images are attached
I was able to read a complete dump of EMMC_PART_BOOT1 , EMMC_PART_BOOT2 and EMMC_PART_USER
(by soldering a pair of cables to the test pin pads (volume up), so that SP-flashtool would intercept preloader that shows up for like one second.
Edit: Was able to extract all partitions except NVRAM and some other, see second post. Apart from that I think I have an emergency backup now. Stock Dump
Now the remaining question: Does anyone have an idea if there is a working A9/10 custom rom around compatible with the device:
On Board / Hardware:
YT9260LP-VER0.2
XY AUTO
2019-07-16
In Software:
Android: YT9213A_00009_V001_202000408
Android os: 10.1 XY AUTO: 3.2 (8227L)
CAN Pro: 3.1 (8227L)
DDR: 2G FLASH: 32G
cpu: A7 1.3GHz x 4
display: 1024x600
MCU: 3.1 (8227L)
Kernel version
3.18.22 [email protected] #6
Wed Apr 8 14:33:14 CST 2020
Build number / custom build version
android-trunk-m0.AC8227L-V1.0
I read out gpt infos and confirmed the scatter file from here
https://forum.xda-developers.com/an...-firmware-chinese-7-head-unit-ac8227-t3931863
does match exactly.
Rom and preloader is different though, my preloader has a 0x800h long padding starting with EMMC_BOOT while the preloader found in the mentioned thread starts with MMM8���FILE_INFO right away.
Other issue is that my NVRAM, PRO_INFO, PROTECT_* partitions are all empty in the dump (full readback or partition based readback makes no difference)
Right now I guess I'll stick with the A10 stock rom as every other Rom I found is older anyways
Stock Dump
Hi my friend
I bought exactly the same stereo in aliexpress
Because the balance and fader don't work I sent a mail to the seller and he sent me a new firmware for upgrade via
This firmware freezes the stereo 10 seconds later that starts
Im trying with the seller to send me the full original firmware to flash with computer but is very slowly...
He send me a new correct firmware to use but in android upgrade format, so I cant use because I cant turn on normally, if you want i will send you.
Can you send me the full dump of this??? ( EMMC_PART_BOOT1 , EMMC_PART_BOOT2 and EMMC_PART_USER )
Thanks a lot!!!
Marcelo
[email protected]
Helló barátaim!
Kínai multimédiás fejegységem van. Januárban jött, telepítettem, megfelelően működött.
A múlt héten aztán kicseréltem az autó akkumulátorát, és amikor újra bekapcsoltam a rádiót, jelszót kér.
Mostanra rájöttem, hogy ez egy képernyőzár jelszó.
Sajnos ezt nem tudtam, ezt nem kapcsoltam be.
Elolvastam a fórumokat, és helyreállításra lenne szükségem. A leírt módszerekkel ezt nem tudom elérni.
A bekapcsoló gombbal nem lehet kikapcsolni a rádiót. Tehát a power / + VOL kombináció nem lehetséges.
Hogyan lehet elérni ezt a helyreállítási módszert?
Kérem, segítsen, nagyon hálás lennék.
Ez a videó:
XNyle said:
I read out gpt infos and confirmed the scatter file from here
https://forum.xda-developers.com/an...-firmware-chinese-7-head-unit-ac8227-t3931863
does match exactly.
Rom and preloader is different though, my preloader has a 0x800h long padding starting with EMMC_BOOT while the preloader found in the mentioned thread starts with MMM8���FILE_INFO right away.
Other issue is that my NVRAM, PRO_INFO, PROTECT_* partitions are all empty in the dump (full readback or partition based readback makes no difference)
Right now I guess I'll stick with the A10 stock rom as every other Rom I found is older anyways
Stock Dump
Click to expand...
Click to collapse
My radio exactly the same as what radio yours.
I half-solved the problem, installed new firmware, and added it.
Tthen when i turn on the radio, it doesn't give a picture, just a black screen.
The side control buttons are lit but do not respond to them or the reset button.
Do you know anything smart?
Help for Chinese car radio stuck on Android logo...
reset does not work,,, attached photo, thank you...
INFO,
YT9260LP-VER0.2
XY AUTO
2019-07-16
9216B V 0.2/C 16G
A005-9216B00019 9. 0
20 20103 1
Well, at this point, we all know the Samsung galaxy s4 mini is straight up a legendary phone, but, can it be used in 2022? Well, yes, probably... But with some tweaks and a custom rom.
WARNING! YOUR WARRANTY IS NOW VOID, AND IF NOT DONE CORRECTLY, THIS COULD TURN YOUR DEVICE INTO A USELESS BRICK OR INTO AN ANDROIDPOD. UNDERVOLTING, OVERVOLTING, AND OVERCLOCKING CAN DAMAGE YOUR PHONE IF NOT DONE CORRECTLY OR WITH THE WRONG SETTINGS! FOLLOW EVERY STEP HERE AS IT WAS OBVIOUSLY TESTED, AND DON'T SKIP THE BACKUP!
The steps:
1- First, update the s4 mini to the latest version of android on its stock ROM. You can do that by going to settings, then "more", then "about the phone", then "software updates". The latest and greatest should be android 4.4.2 KitKat.
2- Rooting it - Now, you have to download kingroot from here, and no guys, it won't steal your data lol, just reset before doing this.
2.1 - Now install the apk from the link I gave you, and skip the apps' introduction. Then click to root and wait some minutes. The phone will restart, but that's not a problem.
3 - Installing TWRP - As you may know, for a custom rom to be installed, we need a custom recovery, right? Yeah, so now we are going to install it.
3.1 - First, go to google play store and download the official TWRP app and run it. Allow its root permissions by going to the KingRoot app or clicking allow on the popup.
3.2 - Then, click on TWRP flash and then on "select device". Search for your S4 mini version and download it. (Download ".img" images or if it doesn't detect, download the other file.) ( 3G DUOS: GT-i9192 serranodsdd / 4G: GT-i9195 serranoltexx )
3.3 - After downloading it, click on "select a file to flash" and select the file you downloaded. Then click on flash to recovery.
4 - Installing the custom rom, kernel, and gapps. Before installing them, of course, you'll have to download them lol.
4.1 - Download links:
Custom rom: Android 6 Bliss v6.4
Download links for: GT-i9192 (serranodsdd) | GT-i9195 (serranoltexx) | (click in your version to download)
Original post: https://forum.xda-developers.com/t/...l-bliss-v6-4-s4-mini-duos-lte-3g-ota.3301793/
Custom overclocked kernel: Remix 2
Download links for: GT-i9192 (serranodsdd) | GT-i9195 (serranoltexx) | (click in your version to download)
Original post: https://forum.xda-developers.com/t/...-remix-kernel-3g-lte-ds-oc-uc-uv-otg.3316865/
Google Apps: click here to download
PUT ALL THESE FILES ON YOUR SD CARD
4.2 - After doing that, turn off your phone and press Volume up button + power button + home button until you see "recovery booting" on the top left corner.
4.3 - If something about modifications appears to you, swipe the thing on the screen to allow twrp to modify the system
4.4 - Backing up - Click on "backup", then on "select storage" then on "micro sd card". After that, check system, boot, recovery, efs, modem, persist, and preload. Then swipe to backup.
4.5 - Installing time - After you made the backup, return to the home screen using the middle button. Then click on "wipe", and then "advanced wipe". Uncheck everything then check "Dalvik / art cache", "cache", "data", and "system". After this is done, return to the home screen, then click on "install". Now browse to "external_sd" and first select the Bliss rom. Then click on "add more zips" and click on the open gapps file. Then again click add more zips and click on the remix kernel. Then swipe to flash.
4.6 - Then, return once again to the home menu, click on "reboot" then on "power off". Then take out your battery for 20 secs, insert it again and turn on the phone.
5. Setting up the phone - Allow any root solicitation you get - Now, after setting it up, go to settings, then on kernel auditor.
Now copy my settings:
CPU:
Max CPU frequency: 2052mhz (this is a 300 MHz overclock, pretty high actually)
Min Cpu frequency: 162mhz (this won't affect the performance and will let the phone reduce battery usage when needed, set it the way I'm saying)
CPU governor: intellidemand
multi-core energy economy: disabled
CPU Voltage:
Reduce 135mV from all of them. If your phone crashes, take out the battery and start again. But now instead of 125, 115, 105 and ahead, as undervolting is different for every phone. (won't reduce performance, will save energy)
CPU HotPlug:
Turn IntelliPlug on and turn off MPDecision
Intelliplug:
Eco Perf
Touch Boost: on
max CPU frequency with the screen turned off: 162mhz (will save a lot of energy)
Temperature: (This won't damage the phone (tested in my phone), but if it does, I'm not responsible)
Frequency Throttle Temperature: 90c (100c if you're not gonna use it while charging)
Core throttle Temperature: 95c
Poll: 1650ms
GPU:
Max GPU frequency: 627 MHz
GPU Governor: OnDemand
Screen:
Color profile: Perfection
Battery:
USB Fast Charge: Turned on
Low Memory Killer / LMK:
Set all to 50 MB
SET ALL OF THEM TO APPLY ON BOOT
That's it for today guys! Hope you enjoy the legendary s4 mini again without lagging issues
Thank you bro.
applesucksLmao said:
Bu noktada hepimiz Samsung galaxy s4 mini'nin efsanevi bir telefon olduğunu biliyoruz, ancak 2022'de kullanılabilir mi? Evet, muhtemelen... Ama bazı ince ayarlar ve özel bir rom ile.
UYARI! GARANTİNİZ ARTIK GEÇERSİZDİR VE DOĞRU YAPILMAZSA BU CİHAZINIZI KULLANIŞSIZ BİR TUĞLA YA DA ANDROIDPOD'A DÖNÜŞTÜREBİLİR. DOĞRU VEYA YANLIŞ AYARLARLA YAPILMADIĞINDA, DÜŞÜK, AŞIRI VE HIZIRMA TELEFONUNUZA ZARAR VEREBİLİR! AÇIKÇA TEST OLDUĞU GİBİ BURADAKİ HER ADIMI TAKİP EDİN VE YEDEKLEMEYİ GEÇMEYİN!
Adımlar:
1- İlk olarak, s4 mini'yi stok ROM'unda android'in en son sürümüne güncelleyin. Bunu ayarlara, ardından "daha fazla"ya, ardından "telefon hakkında"ya ve ardından "yazılım güncellemeleri"ne giderek yapabilirsiniz. En yeni ve en büyük android 4.4.2 KitKat olmalıdır.
2- Köklendirme - Şimdi, buradan kingroot'u indirmeniz gerekiyor ve hayır beyler, verilerinizi çalmaz lol, bunu yapmadan önce sıfırlayın.
2.1 - Şimdi size verdiğim linkten apk'yı kurun ve uygulamaların tanıtımını atlayın. Ardından root'a tıklayın ve birkaç dakika bekleyin. Telefon yeniden başlatılacak, ancak bu bir sorun değil.
3 - TWRP Kurulumu - Bildiğiniz gibi, özel bir romun yüklenmesi için özel bir kurtarmaya ihtiyacımız var, değil mi? Evet, şimdi onu kuracağız.
3.1 - Öncelikle google play store'a gidin ve resmi TWRP uygulamasını indirin ve çalıştırın. KingRoot uygulamasına giderek veya açılır pencerede izin ver'i tıklayarak kök izinlerine izin verin.
3.2 - Ardından, TWRP flash'a ve ardından "cihaz seç" seçeneğine tıklayın. S4 mini sürümünüzü arayın ve indirin. (".img" resimlerini indirin veya algılamıyorsa diğer dosyayı indirin.) ( 3G DUOS: GT-i9192 serranodsdd / 4G: GT-i9195 serranoltexx )
3.3 - İndirdikten sonra "flash için bir dosya seç" seçeneğine tıklayın ve indirdiğiniz dosyayı seçin. Ardından kurtarma için flaşa tıklayın.
4 - Özel rom, çekirdek ve boşlukları yükleme. Bunları yüklemeden önce elbette lol indirmeniz gerekecek.
4.1 - İndirme bağlantıları:
Özel rom: Android 6 Bliss v6.4
İndirme bağlantıları: GT-i9192 (serranodsdd) | GT-i9195 (serranoltexx) | (indirmek için sürümünüzü tıklayın)
Orijinal gönderi: https://forum.xda-developers.com/t/...l-bliss-v6-4-s4-mini-duos-lte-3g-ota.3301793/
Özel hız aşırtmalı çekirdek: Remix 2
İndirme bağlantıları: GT-i9192 (serranodsdd) | GT-i9195 (serranoltexx) | (indirmek için sürümünüzü tıklayın)
Orijinal gönderi: https://forum.xda-developers.com/t/...-remix-kernel-3g-lte-ds-oc-uc-uv-otg.3316865/
Google Apps: indirmek için burayı tıklayın
TÜM BU DOSYALARI SD KARTINIZA KOYUN
4.2 - Bunu yaptıktan sonra telefonunuzu kapatın ve sol üst köşede "kurtarma önyüklemesi" görene kadar Sesi açma düğmesi + güç düğmesi + ana sayfa düğmesine basın.
4.3 - Değişikliklerle ilgili bir şey size görünürse, twrp'nin sistemi değiştirmesine izin vermek için ekrandaki şeyi kaydırın
4.4 - Yedekleme - "Yedekle"ye, ardından "depolama alanı seç"e ve ardından "mikro sd kart"a tıklayın. Bundan sonra sistem, önyükleme, kurtarma, efs, modem, kalıcılık ve önyüklemeyi kontrol edin. Ardından yedeklemek için kaydırın.
4.5 - Yükleme süresi - Yedeklemeyi yaptıktan sonra ortadaki düğmeyi kullanarak ana ekrana dönün. Ardından "silme" ve ardından "gelişmiş silme" üzerine tıklayın. Her şeyin işaretini kaldırın ve ardından "Dalvik / sanat önbelleği", "önbellek", "veri" ve "sistem" öğelerini işaretleyin. Bu yapıldıktan sonra ana ekrana dönün, ardından "yükle" ye tıklayın. Şimdi "external_sd"ye gidin ve önce Bliss rom'u seçin. Ardından "daha fazla zip ekle"ye tıklayın ve açık gapps dosyasına tıklayın. Sonra tekrar daha fazla zip ekle'ye tıklayın ve remix çekirdeğine tıklayın. Ardından yanıp sönmek için kaydırın.
4.6 - Ardından, bir kez daha ana menüye dönün, "yeniden başlat"a ve ardından "kapat"a tıklayın. Ardından pilinizi 20 saniye çıkarın, tekrar takın ve telefonu açın.
5. Telefonu kurma - Aldığınız herhangi bir kök talebine izin verin - Şimdi, kurduktan sonra ayarlara, ardından çekirdek denetçisine gidin.
Şimdi ayarlarımı kopyalayın:
İŞLEMCİ:
Maksimum CPU frekansı: 2052 mhz (bu, 300 MHz'lik bir hız aşırtmadır, aslında oldukça yüksek)
Min Cpu frekansı: 162mhz (bu performansı etkilemez ve gerektiğinde telefonun pil kullanımını azaltmasını sağlar, dediğim gibi ayarlayın)
CPU valisi: intellidemd
çok çekirdekli enerji ekonomisi: devre dışı
CPU Voltajı:
Hepsinden 135mV azaltın. Telefonunuz çökerse, pili çıkarın ve yeniden başlatın. Ama şimdi 125, 115, 105 ve ilerisi yerine, düşük voltaj her telefon için farklı olduğu için. (performansı düşürmez, enerji tasarrufu sağlar)
CPU HotPlug'ı:
IntelliPlug'ı açın ve MPDecision'ı kapatın
Intelliplug:
Eko Mükemmellik
Dokunmatik Güçlendirme: açık
ekran kapalıyken maksimum CPU frekansı: 162mhz (çok fazla enerji tasarrufu sağlar)
Sıcaklık: (Bu, telefona zarar vermez (telefonumda test edilmiştir), ancak verirse sorumlu değilim)
Frekans Gaz Kelebeği Sıcaklığı: 90c (şarj ederken kullanmayacaksanız 100c)
Çekirdek gaz kelebeği Sıcaklığı: 95c
Anket: 1650ms
GPU:
Maksimum GPU frekansı: 627 MHz
GPU Valisi: OnDemand
Ekran:
Renk profili: Mükemmellik
Pil:
USB Hızlı Şarj: Açık
Düşük Bellek Katil / LMK:
Tümünü 50 MB olarak ayarla
TÜMÜNÜ ÖNLEMEDE UYGULANACAK ŞEKİLDE AYARLAYIN
Bugünlük bu kadar arkadaşlar! Umarım gecikme sorunları olmadan efsanevi s4 mini'yi tekrar beğenirsiniz
Click to expand...
Click to collapse
Özgür Doğan Güneş said:
Thank you bro.
Click to expand...
Click to collapse
You're welcome! Did it work? I can help you if you have any problems or misunderstandings
core 2 goes offline (is there a solution?)
other than that no problem
Device: GT-l9190
Custom overclocked kernel: Remix 2 and rom installed
applesucksLmao said:
You're welcome! Did it work? I can help you if you have any problems or misunderstandings
Click to expand...
Click to collapse
Özgür Doğan Güneş said:
core 2 goes offline (is there a solution?)
other than that no problem
Device: GT-l9190
Custom overclocked kernel: Remix 2 and rom installed
Click to expand...
Click to collapse
It's not a problem, it will sometimes go offline when the second one is not needed, to save energy and battery and produce less heat
Hey. After installing the rom, gapps and kernel, while being on first setup kernel adiutor asked for root privilegies, after that phone always turns off
Hey, is the updated kernel also working with other custom roms or only bliss 6.4?
O kernel funciona se eu tiver a lineage os 14.1 ?
Ariel9144 said:
O kernel funciona se eu tiver a lineage os 14.1 ?
Click to expand...
Click to collapse
sim
yes
elgatofeliz said:
Hey, is the updated kernel also working with other custom roms or only bliss 6.4?
Click to expand...
Click to collapse
other roms based on LineageOS
pilsudski said:
Hey. After installing the rom, gapps and kernel, while being on first setup kernel adiutor asked for root privilegies, after that phone always turns off
Click to expand...
Click to collapse
probably your battery is bad, try to direct charge it with a 5v supply
Hello, I just tried to install the kernel zip file on my i9195 with latest twrp and it just said that it was unable to read the ramfs.
Also, I am using Android 11, which has kernel 3.4.113, I am not sure if it is smart to install a much older kernel and also there is no su binary in Android 11. :/
L3P3 said:
Hello, I just tried to install the kernel zip file on my i9195 with latest twrp and it just said that it was unable to read the ramfs.
Also, I am using Android 11, which has kernel 3.4.113, I am not sure if it is smart to install a much older kernel and also there is no su binary in Android 11. :/
Click to expand...
Click to collapse
The android version unfortunately can't be Android 11. It needs to be an android 6 (Marshmallow) or android 7 (nougat) rom based on lineageos or AOSP
I've tried various ways of updating.
Starting from updating directly online via Android settings.
Manual update of memory card.
Update from adb sideload
even update via Flash Tool, using RAW firmware.
all processes went well and the results were successful.
But every time the Android reboots, it immediately becomes a bootloop.
this only happens if i flash the adroid M firmware.
if i flash raw firmware using flas tool, with android L firmware,
Everything is alright.
(sory for the englis, iam useng google translt)
Spoiler: Bahasa Indonesia
aku sudah mencoba berbagai cara update.
Mulai dari update langsung online lewat seting android.
Update manual dari kartu memory.
Udate dari adb sideload
bahkan update lewat Flash Tool, mengunakan RAW frimware.
semua prose berjalan baik dan keterangan hasilnya sukses.
Tapi tiap kali android reboot awal, langsung jadi bootloop.
ini hanya terjadi jika aku flash frimware adroid M.
jika aku flash raw frimware mengunakan flas tool, dengan frimware android L,
semuanya baik baik saja.
problem solved.
i trick it by flashing a rom via TWRP, whether it's a custom rom or a stock rom that has been edited so that it fits and can be flashed via twrp.
masalah terselesaikan.
ternyata aku bisa mengakalinya dengan cara flass rom lewat TWRP, entah itu costum rom ataupun stok rom yang sudah di edit supaya cocok dan bisa di flash lewat twrp.