So I have a rooted and unlocked bootloader and I want to flash twrp and lineageOS. Flashing twrp fails. I am really confused on which version of TWRP to flash. None that I have tried work. Odin won't flash them.
yum13241 said:
So I have a rooted and unlocked bootloader and I want to flash twrp and lineageOS. Flashing twrp fails. I am really confused on which version of TWRP to flash. None that I have tried work. Odin won't flash them.
Click to expand...
Click to collapse
I found Philz CWM recovery for your device:
[hltevzw][hlte][CWM Advanced Edition] PhilZ Touch
Main thread + features + install instructions + dev support http://forum.xda-developers.com/showthread.php?t=2201860 PhilZ Touch is a CWM Advanced Edition that adds all the features you could ever miss in CWM It is a well proven recovery for...
forum.xda-developers.com
It_ler said:
I found Philz CWM recovery for your device:
[hltevzw][hlte][CWM Advanced Edition] PhilZ Touch
Main thread + features + install instructions + dev support http://forum.xda-developers.com/showthread.php?t=2201860 PhilZ Touch is a CWM Advanced Edition that adds all the features you could ever miss in CWM It is a well proven recovery for...
forum.xda-developers.com
Click to expand...
Click to collapse
Hmm... I would flash this with Odin, right?
yum13241 said:
Hmm... I would flash this with Odin, right?
Click to expand...
Click to collapse
Exactly
It_ler said:
Exactly
Click to expand...
Click to collapse
you need the tar file
https://dl.twrp.me/hlte/ from here this is the latest installing via twrp failed for me got a soft brick had to install via odin
Related
Hi Guyz
Sorry if this has been discussed before many times.
Is there anyway I can root my Note3 (N9005) as of now? I want some softwares to be installed - Titanium backup, Root explorer, Droidwall etc
any ideas?
Thanks
Sam
Download a custom recovery (TWRP or CWM) and Flash or install SuperSU.
H0rn said:
Download a custom recovery (TWRP or CWM) and Flash or install SuperSU.
Click to expand...
Click to collapse
Which method is more reliable and works the best bro?
sam20e said:
Which method is more reliable and works the best bro?
Click to expand...
Click to collapse
On the day I got my phone I used CWM recovery while I waited for TWRP to be released, I prefer TWRP over CWM, I followed this here: http://forum.xda-developers.com/showthread.php?t=2454079
H0rn said:
On the day I got my phone I used CWM recovery while I waited for TWRP to be released, I prefer TWRP over CWM, I followed this here: http://forum.xda-developers.com/showthread.php?t=2454079
Click to expand...
Click to collapse
thnx mate
Hi guys,
I just want to ask you how could I replace TWRP Recovery with CWM on my LG G2 D802 International?Are there any issue/incompatibility?
I have rooted and installed TWRP, but I have issue with installing CyanogenMod 10.2 Stable (I checked MD5 and downloaded it many times): as I understand is a problem of TWRP compatibility.
Maxximo88 said:
Hi guys,
I just want to ask you how could I replace TWRP Recovery with CWM on my LG G2 D802 International?Are there any issue/incompatibility?
I have rooted and installed TWRP, but I have issue with installing CyanogenMod 10.2 Stable (I checked MD5 and downloaded it many times): as I understand is a problem of TWRP compatibility.
Click to expand...
Click to collapse
It depends on what you download. If you download the recovery.img you can use the app "flashify" to flash the recovery, or if you download a flashable .zip then flash it in recovery then reboot recovery.
There are also instructions on how to use adb and loki here: http://forum.xda-developers.com/showthread.php?t=2449670
Mandelbrot.Benoit said:
It depends on what you download. If you download the recovery.img you can use the app "flashify" to flash the recovery, or if you download a flashable .zip then flash it in recovery then reboot recovery.
There are also instructions on how to use adb and loki here: http://forum.xda-developers.com/showthread.php?t=2449670
Click to expand...
Click to collapse
Mandelbrot.Benoit thanks fot your reply.
I'm interested with the flashable zip, so I just need to download it from Official CWM topic the file called "ZIP FILES - OFFICIAL - TOUCH D802" and flash it from TWRP recovery?
Maxximo88 said:
Mandelbrot.Benoit thanks fot your reply.
I'm interested with the flashable zip, so I just need to download it from Official CWM topic the file called "ZIP FILES - OFFICIAL - TOUCH D802" and flash it from TWRP recovery?
Click to expand...
Click to collapse
I'm not 100% if thats a "lokified" recovery or not. I don't think you'll hurt anything by flashing it. If you can't flash something using that recovery then there is an issue and you can flash another recovery.
Maxximo88 said:
Mandelbrot.Benoit thanks fot your reply.
I'm interested with the flashable zip, so I just need to download it from Official CWM topic the file called "ZIP FILES - OFFICIAL - TOUCH D802" and flash it from TWRP recovery?
Click to expand...
Click to collapse
I used the Flashify app from the play store to switch recoveries with no issues.
Mandelbrot.Benoit said:
I'm not 100% if thats a "lokified" recovery or not. I don't think you'll hurt anything by flashing it. If you can't flash something using that recovery then there is an issue and you can flash another recovery.
Click to expand...
Click to collapse
What do You suggest?
Otherwise, there is also the app called ROM Manger which should automatically flash the CWM.
The important thing is that it does not create problems between recovery.
mouf32 said:
I used the Flashify app from the play store to switch recoveries with no issues.
Click to expand...
Click to collapse
Thanks Mouf32! :victory:
No issue guys,
CWM flashed correctly! Thanks!
I just installed TWRP (2.6.x) from GooManager (per the all-in-one thread here: http://forum.xda-developers.com/showthread.php?t=2314494), and I'm about to flash the GPE ROM by Danvdh. I understand that this ROM is NOT loki'd, and that normally I'd need to flash loki-doki, but I suspect that this TWRP is an "auto-loki" version, where it will automatically patch any new kernels that are installed. How would I know that this is the case?
godefroi said:
I just installed TWRP (2.6.x) from GooManager (per the all-in-one thread here: http://forum.xda-developers.com/showthread.php?t=2314494), and I'm about to flash the GPE ROM by Danvdh. I understand that this ROM is NOT loki'd, and that normally I'd need to flash loki-doki, but I suspect that this TWRP is an "auto-loki" version, where it will automatically patch any new kernels that are installed. How would I know that this is the case?
Click to expand...
Click to collapse
if it boots and just sits there at the boot screen, chances are the recovery is not auto loki'ed, I flash the loki patch everytime a flash a rom to be on the safe side. Good luck
godefroi said:
I just installed TWRP (2.6.x) from GooManager
Click to expand...
Click to collapse
I think the only "auto-loki" is a CWM one called Philz recovery so chances are you'll need the loki-doki zip.
Its like 1MB anyways, might as weljust download it and keep it on your phone. It doesn't matter what rom or recovery your using its the same zip file and most recoverys let you flash more than one zip at a time anyways.
correct on all above
twrp is loki'd, so you can flash it. but does not auto loki non-loki'd roms etc
so flash loki after your mentioned rom
like AX, if in doubt i flash loki-doki anyway
:good:
After lots of hesitating, I rooted again.
I installed TWRP 3.0 and downloaded phronesis v6.
I continued to install it, but while the text "Starting AROMA installer" appeared, TWRP froze and after a few seconds it restarted into my normal system. I tried 2 other roms, same issue.
TWRP 3.0 was the culprit I thought. Well, I flashed CWM 6.0.4.8 and tried it. It freezes and doesn't do anything.
Now, what is the problem exactly here?
After lots of trying to post this article due to my internet, I tried Philz and it works. Don't blame me, blame the infrastructure of my provider. Well, blame me anyways.
Twrp 3.0 isn't a aroma friendly. Flash with 2.8.7.0 and below.
Sent from my SM-N920C
Rosli59564 said:
Twrp 3.0 isn't a aroma friendly. Flash with 2.8.7.0 and below.
Sent from my SM-N920C
Click to expand...
Click to collapse
Yes, I found that out later, but still, why didn't CWM work?
nedvire said:
Yes, I found that out later, but still, why didn't CWM work?
Click to expand...
Click to collapse
Not sure. Haven't use cwm for long.
Sent from my SM-N920C
So, the latest version of PHILZ will work out with the aroma installer? For sure?
I can't open TWRP 2.8.7 or lower version with the original stock rom (5.0) rooted version...... How is that possible?
maxieboy40 said:
So, the latest version of PHILZ will work out with the aroma installer? For sure?
I can't open TWRP 2.8.7 or lower version with the original stock rom (5.0) rooted version...... How is that possible?
Click to expand...
Click to collapse
Should work with aroma but not sure why the guy above had problem.
Sent from my SM-N920C
Rosli59564 said:
Should work with aroma but not sure why the guy above had problem.
Sent from my SM-N920C
Click to expand...
Click to collapse
I had the same problem as the Topic Starter. its going to freeze if the rom wants to start arom installer using TWRP 3.0.....
So that why i ask if philz is working okey with aroma installer and that is not going to freeze like TWRP 3.0..?
Thanks.
Someone who has a working download link of Philz touch? Can't find one
it's for the Samsung Galaxy Note 3 N9005 international version...
Thank you all ready
Same problem.. need quick n fast solution
Hey. I have Note 3 N900. I have same issue. While installing ROM from CWM and also Philz recovery. AROMA installer freezez nd phone restarts. Could it be a problem with kernal? I've installed another ROM before. Download mode says binary is custom.
Should I try flashing stock rom and try again?
Post 3 .
Hi There,
RE: TWRP
I recommend using TWRP 2.8.7.0, Its not the latest release but its the most reliable. TWRP 3.0+ have only froze when attempting any aroma file. Even when flashing without aroma, I have still had flash errors and reboots and have always had to retreat back to 2.8.7-, this is really unfortunate as there are extra capabilities in 3.0+ that would be good to have. If you still want to use 3.0+ but want aroma-ish options you can script your own instructions in a gapps-config file. Instructions here: https://github.com/opengapps/opengapps/wiki/Advanced-Features-and-Options
RE: ClockWorkMod
These are the two best sources for CWM recoveries. I have found CWM 6.0.4.8 & PhilzTouch working good.
i) http://forum.xda-developers.com/wiki/ClockworkMod_Recovery
ii) https://www.droidwiki.de/wiki/ClockWorkMod
iii) http://forum.xda-developers.com/showthread.php?t=2201860 --- XDA Philz Touch Thread
With CWM/Philz you can use aroma with CWM/Philz, just download clockwork aroma file manager (aromafm) attached. Put the aromafm.zip in "clockworkmod/aromafm/aromafm.zip" in any of the storage volumes. Read the quick guide in Philz xda thread for instructions on themes, configuration, formatting as folder placement is important.
Latest official ClockWorkMod link here: https://drive.google.com/open?id=0BzC7HZGcSrMzeXhCdlFtTVh2TXc
Themes Sample for Philz: https://drive.google.com/open?id=0BzC7HZGcSrMzMkZYd2UwVExOZDg
Latest Philz Touch for n9005 attached.
thank you saved my lifw thought wouldnt get my bobcat rom installed yesssssssssssssssssssssssssssssssssssss
Aroma installer freezing is solved by using recovery TWRP v2.8.7.0
I can confirm, that Aroma installer is freezing on Samsung Galaxy Note3 SM-N9005 (hltexx) when using TWRP v3.x+, but works fine, when using TWRP v2.8.7.0 recovery.
I use Dual Boot Patcher for install multiple ROMs on my Note3 (note: Dual Boot Patcher supports not just Note3, but more than 300 other phones).
https://github.com/chenxiaolong/DualBootPatcher
https://dbp.noobdev.io/downloads/
https://forum.xda-developers.com/showthread.php?t=2447534
Aroma installer is used by DualBootUtilities, when I want to change to boot another ROM from Recovery.
After suffering a lot from Aroma installer is freezing when flashing DualBootUtilities, I got redirected to this thread, where I found the solution, so I flashed recovery TWRP v2.8.7.0.
Finally, when flashing DualBootUtilities-9.3.0.r407.g9a902091.zip works successfully on Samsung Galaxy Note3 SM-N9005 (hltexx) thanks to TWRP v2.8.7.0! No freeze!
(I can confirm, that Aroma installer is freezing on Samsung Galaxy Note3 SM-N9005 (hltexx) when using TWRP v3.x+, but works fine, when using TWRP v2.8.7.0 recovery.)
Yes see thousands of posts and guides .
JJEgan said:
(I can confirm, that Aroma installer is freezing on Samsung Galaxy Note3 SM-N9005 (hltexx) when using TWRP v3.x+, but works fine, when using TWRP v2.8.7.0 recovery.)
Yes see thousands of posts and guides .
Click to expand...
Click to collapse
I was not aware of the thousands of posts and guides, just shared my experience.
Anyway, I was happy, that installing TWRP v2.8.7.0 solved my problem.
Does the CWM recovery has official site to download and stay up to date with the latest version? I don't like TWRP...
CWM has not been updated for a long time so I think TWRP is the only option.
I beleve CWM is installed via their ROM manager app.
http://www.clockworkmod.com/
Most ROMs won't install with Clockworkmod these days, so either you use TWRP or you go without.
Strephon Alkhalikoi said:
Most ROMs won't install with Clockworkmod these days, so either you use TWRP or you go without.
Click to expand...
Click to collapse
It's true. CWM recovery hasn't been updated in many, many, many, many months.