I am looking to root my head unit Toyota Verso 2013
android 8.1.0
Processor-type Octa-sp9853i
MCU-Version Ts9.4.3.167-30-C03181-190422
CAN-Version v3.28.010BYPS
System-Version V.11.1.1.20190610.153530_CLC1
I bought from aliexpres (Ullgo Shop)
4 GB RAM / 64 GB
hello there. have the same head unit.
could you please tell one thing - are "car settings" app is working on your device? I mean door locking, etc.
LazyGatto said:
hello there. have the same head unit.
could you please tell one thing - are "car settings" app is working on your device? I mean door locking, etc.
Click to expand...
Click to collapse
couple of things works for a short time and goes away for example ventilation display on screen, door opening display on screen
Steering wheel button not 100 percent correct
Here you have gentlemans.
Ullgo=Allwinner=Ownice 960 k6=TEYES=Topway, all with SC9853i processor.
Dispatch, put on usb stick only the files without folder, plug to the radio, go to update firmware function and let the radio to work.
After the automatic restart, install Magisk Manager and Root Explorer, give permission to Root Explorer from inside Magisk Manager and it's DONE.
I have this ULLGO (10", 4gb RAM, SC9853i):
MCU VERSION Ts9.4.3-24-84-94C681-191021
SYSTEM VERSION V11.1.1_20200304.092444_AKW2-X
ANDROID 9
I taked the files from a VIETNAM seller for Ownice C960 k6 and in 2 minutes I make the root.
All the bests.
HI Guys,
Im a newbie here. Posted about a month ago but no reply.
I wish I had found the threads and reviews about the seller before I purchased. Most un helpful
I have a few issues i will list. The last discussion with the seller was about updating firmware. He tells me there is an update but After several weeks of messaging him i have had no reply. I am now discussing with PAYPAL.
http://www.autostereo.com.cn
https://www.aliexpress.com/item/32965483853.html
https://www.ebay.co.uk/itm/283835207820
QUITE FRANKLY. The user interface is very basic and ugly. So looking for assistance to do something.
Wanting to know if the HU is able to be update on firmware or Rooted o think you call it. If so will need instruction, and I am happy to pay someone for this. PAYPAL or Bank Transfer.
OK so issues.
HU
MAIN ISSUE is SOMETIME Screen will Flash a line from top to bottom
1. ECU SPEED AND REVS.. NOT WORKING
( ECU CABLE IS CONNECTED) I
2. ANDROID AUTO… INTERMITTENT. TURNS ON OFF ON OFF ON OFF..
.......FIXED......
3. EASY CONNECT… INTERMITTENT TURNS ON OFF ON OFF ON OFF
FIXED
4. Phone connection AUDIO QUALITY IS TERRIBLE,, SO BAD I cannot hear caller.
In the package, there is the miccorphone, did you connect this?
FIXED
5. DOOR OPEN Shows Wrong side If Car door is open on Left Screen shows on right.
Setting-----user setting----right side
THIS IS FIXED
6. Need to be able to change the Startup Screen (Yellow Car) UGLY. Also Car that show up in PNG file.
CAN ONLY CHANGE BOIT LOGO TO MONDEO OR YELLOW SPORTS CAR
NO OPTION TO USE MY OWN LOGO
Some of these things are nothing major but for what i paid I expect it to work as it should.
Detail are
https://www.aliexpress.com/item/32965483853.html
4gb/64gb 13.6 Android9 13.6" Tesla style Car No DVD Player GPS Navigation For Ford Mondeo Fusion MK5 2017
Android Version 9
Security Patch April 5 2019
Basband Version Unknown
Kernel Version 4.4.167
#24 Thu Dec 26 09:36:21 CST 2019
Build number
rk3399-userdebug 9 PQ2A.190305.002.eng.work2.20191226.161648 test-keys
MCUVer: RL78c_NCHHWY_F047PB -CAN84
FrameworkVer: px6-userdebug 9 PQ2A.190305.002
eng.work2.20191226.161648 test-keys
OSVer: 9 Thu Dec 26 09:3621 CST 2019
APPVer: 200200113-1920x1030-9600chwy-edp
Nandflash: 50.42G/64.00G
RAM: 2G/4G
BTVer: SD_carplay_I2S_191230_sdk1.5
Barcode: ZF-1809X02020033229
Model rk3399
Serial Number
Any help appreciated.
JIMMYRECARD said:
HI Guys,
Im a newbie here. Posted about a month ago but no reply.
I wish I had found the threads and reviews about the seller before I purchased. Most un helpful
I have a few issues i will list. The last discussion with the seller was about updating firmware. He tells me there is an update but After several weeks of messaging him i have had no reply. I am now discussing with PAYPAL.
http://www.autostereo.com.cn
https://www.aliexpress.com/item/32965483853.html
https://www.ebay.co.uk/itm/283835207820
QUITE FRANKLY. The user interface is very basic and ugly. So looking for assistance to do something.
Wanting to know if the HU is able to be update on firmware or Rooted o think you call it. If so will need instruction, and I am happy to pay someone for this. PAYPAL or Bank Transfer.
OK so issues.
HU
MAIN ISSUE is SOMETIME Screen will Flash a line from top to bottom
1. ECU SPEED AND REVS.. NOT WORKING
( ECU CABLE IS CONNECTED) I
2. ANDROID AUTO… INTERMITTENT. TURNS ON OFF ON OFF ON OFF..
.......FIXED......
3. EASY CONNECT… INTERMITTENT TURNS ON OFF ON OFF ON OFF
FIXED
4. Phone connection AUDIO QUALITY IS TERRIBLE,, SO BAD I cannot hear caller.
In the package, there is the miccorphone, did you connect this?
FIXED
5. DOOR OPEN Shows Wrong side If Car door is open on Left Screen shows on right.
Setting-----user setting----right side
THIS IS FIXED
6. Need to be able to change the Startup Screen (Yellow Car) UGLY. Also Car that show up in PNG file.
CAN ONLY CHANGE BOIT LOGO TO MONDEO OR YELLOW SPORTS CAR
NO OPTION TO USE MY OWN LOGO
Some of these things are nothing major but for what i paid I expect it to work as it should.
Detail are
Android Version 9
Security Patch April 5 2019
Basband Version Unknown
Kernel Version 4.4.167
#24 Thu Dec 26 09:36:21 CST 2019
Build number
rk3399-userdebug 9 PQ2A.190305.002.eng.work2.20191226.161648 test-keys
MCUVer: RL78c_NCHHWY_F047PB -CAN84
FrameworkVer: px6-userdebug 9 PQ2A.190305.002
eng.work2.20191226.161648 test-keys
OSVer: 9 Thu Dec 26 09:3621 CST 2019
APPVer: 200200113-1920x1030-9600chwy-edp
Nandflash: 50.42G/64.00G
RAM: 2G/4G
BTVer: SD_carplay_I2S_191230_sdk1.5
Barcode: ZF-1809X02020033229
Model rk3399
Serial Number
Any help appreciated.
Click to expand...
Click to collapse
Hi, with this kind of radio you will never have zero issue. On the other side it can give flexibilty and a lot of things you cannot have on other autoradio.
- To set sometihing you can access the Factory menu (password 126). There you can set logo and others aspets. But please act carefully, and on your own risk. First of all do a config back-up: in Factory menu click the "Export" button; that will create a dmcu.cfg file; save it on an external drive.
-Moreover, you should learn the way you can enter the recovery on your own radio.
- Here you can find about a ROM mod:
https://forum.xda-developers.com/an...t/rom-hal9k-mod-v4-mtcd-e-head-units-t4046361
Anyway if your are not sitisfied, the issue you reported are enough to send back via paypal. I suggest to avoid mods, if you want follow that way.
Usually, the firmware updates that the sellers provide are MCU file (dmcu.img) - if you get, the seller will tell you also the way to install; it's different from ROM.
MediaTerraneo said:
Hi, with this kind of radio you will never have zero issue. On the other side it can give flexibilty and a lot of things you cannot have on other autoradio.
- To set sometihing you can access the Factory menu (password 126). There you can set logo and others aspets. But please act carefully, and on your own risk. First of all do a config back-up: in Factory menu click the "Export" button; that will create a dmcu.cfg file; save it on an external drive.
-Moreover, you should learn the way you can enter the recovery on your own radio.
- Here you can find about a ROM mod:
https://forum.xda-developers.com/an...t/rom-hal9k-mod-v4-mtcd-e-head-units-t4046361
Anyway if your are not sitisfied, the issue you reported are enough to send back via paypal. I suggest to avoid mods, if you want follow that way.
Usually, the firmware updates that the sellers provide are MCU file (dmcu.img) - if you get, the seller will tell you also the way to install; it's different from ROM.
Click to expand...
Click to collapse
Thank you. I will have a look at that.
MediaTerraneo said:
Hi, with this kind of radio you will never have zero issue. On the other side it can give flexibilty and a lot of things you cannot have on other autoradio.
- To set sometihing you can access the Factory menu (password 126). There you can set logo and others aspets. But please act carefully, and on your own risk. First of all do a config back-up: in Factory menu click the "Export" button; that will create a dmcu.cfg file; save it on an external drive.
-Moreover, you should learn the way you can enter the recovery on your own radio.
- Here you can find about a ROM mod:
https://forum.xda-developers.com/an...t/rom-hal9k-mod-v4-mtcd-e-head-units-t4046361
Anyway if your are not sitisfied, the issue you reported are enough to send back via paypal. I suggest to avoid mods, if you want follow that way.
Usually, the firmware updates that the sellers provide are MCU file (dmcu.img) - if you get, the seller will tell you also the way to install; it's different from ROM.
Click to expand...
Click to collapse
Interesting and thanks again.
It doesnt look difficult from what I have read. The only question I would have, Is it worth doing? Can I revert to OEM if it isnt what I want? Further Given the type of HU i have is this possible with the Dowload available or is it for a particular type? Mine is PX6 Android 9.0 from the factory. DOes it make any difference if its 13.6" screen?
But First and foremost I will work out how to get to recovery as you say.
Cheers again, your a good man.
JIMMYRECARD said:
Interesting and thanks again.
It doesnt look difficult from what I have read. The only question I would have, Is it worth doing? Can I revert to OEM if it isnt what I want? Further Given the type of HU i have is this possible with the Dowload available or is it for a particular type? Mine is PX6 Android 9.0 from the factory. DOes it make any difference if its 13.6" screen?
But First and foremost I will work out how to get to recovery as you say.
Cheers again, your a good man.
Click to expand...
Click to collapse
Hi,
It depends on your interest and your intention to dedicate time . In my opinion the @Hal9k_ ROM is a very intersting one.
Yes, you can go back to the original ROM, but you must have the file to do that. May be if you ask to @Hal9k_ , he could tell you more details about the possibility to go back to the OEM.
What makes differece among Head Units is:
- the Hardware model: you have a PX6, a good one
- the Brand, as it tells you the MCU (the low level firmware) you can use when updating it
- the screen size is not so important, but it must be a supported one
About entering recovery have a look https://www.youtube.com/watch?v=lPQgV_55Rkk&feature=youtu.be
It may depend on your specific Unit.
Cheers
Hello !
I have trouble with bought alps device car head unit FF5000 (model 8227L).
System freezes, process com.ts.mainUI8 hanging not allowing to enter and listen any kind of music, dsp worked now just blinks and does nothing, buttons dont work as they are non existant (with SWC also), after car shutdown when HU shutsdown memory empties and resets data like date and time etc.
Can anyone help me bring this HU in order again ?
I don't know what to do anymore, it worked perfectly for three days and then in a sudden started problems.
I tried so far erasing data to factory default but problem still exist.
I will post system data on request... for now have this image of system :
MODEL: 8227L - android 8.1 (displays as Android 10) - patch from March 2019 alps/full_8227L_demo/8227L_demo:8.1.0/O11019/1550113051:userdebug/test-keys
HMI: TSKJ.C.Q.F3.C04.2020.27.08.30
MCU: JUST SAYS H BUT IT HAS ITS NUMBER CANT SEE IT
MEDIA: NULL - MUST BE SOMETHING HERE ASWELL
BTV: BT.19.11.12.1200 (mac ADDRESS)
CAN ANYONE HELP ME WITH THIS PLEASE TO UPGRADE/UPDATE DO SOME THING and turn this hu BACK in life ?
Help with Alps FF-5000 Android 10
I am also interested in this topic, I have the same unit and I would like to get the original Android 10 Firmware, since I changed it for a lower one, if someone knows how to Root this model, it could help us both.
I have a full backup of boot_1 boot_2 and emmc_user partitions. It’s for 2g-32g model 8227l
It’s fake android 10 with api27 which is 8.1 Oreo if that helps
Includes SU binary that’s not hampered from factory. Eonon had SU binary but was not functional per se.
nolimitzr2 said:
I have a full backup of boot_1 boot_2 and emmc_user partitions. It’s for 2g-32g model 8227l
It’s fake android 10 with api27 which is 8.1 Oreo if that helps
Includes SU binary that’s not hampered from factory. Eonon had SU binary but was not functional per se.
Click to expand...
Click to collapse
Well, you would do me a great favor if you would provide them to me. I write to you privately.
ALPS FF5000 model 8227L
Javierlopcast said:
I am also interested in this topic, I have the same unit and I would like to get the original Android 10 Firmware, since I changed it for a lower one, if someone knows how to Root this model, it could help us both.
Click to expand...
Click to collapse
I SOLVED MY PROBLEM WITH THIS DEVICE
It was GPS antenna. Its interference or faulty receiver loses MCU settings in memory. Once disconnected all turns normal.
Do the following :
- diconnect gps antenna
- disconnect radio antenna and then reconnect while ignition is on (gps antenna disconnected)
- turn ignition off, press button reset while turning ignition key, release reset and wait for device reseting
- adjust device settings again and enjoy the music !
+ get a new gps antenna !
:good:
FOR SOFTWARE UPDATES PLEASE CONTACT YOUR SELLER OR download from :
(I assume that yours is android 8.1 - upgraded to android 10)
https://yadi.sk/d/umCvHqCDzHccr
!!! PLEASE TAKE NOTE THAT YOU MUST CHOOSE THE RIGHT MCU AND SOFTWARE !!!
ALPS FF5000 model 8227L
nolimitzr2 said:
I have a full backup of boot_1 boot_2 and emmc_user partitions. It’s for 2g-32g model 8227l
It’s fake android 10 with api27 which is 8.1 Oreo if that helps
Includes SU binary that’s not hampered from factory. Eonon had SU binary but was not functional per se.
Click to expand...
Click to collapse
Hello, do not intermix al softwares in order to get device working !
Download and install with usb/SD card : https://yadi.sk/d/umCvHqCDzHccr
IF THIS LINK IS NOT HELPING YOU....
I'M UPLOADING MY SOFTWARE FOR AC8227L DEVICE THAT MY SELLER PROVIDED ME :
https://drive.google.com/file/d/1Ta2vL7Fc8tWmzmRxaJ-JMYGmlYYnRmud/view?usp=sharing
- it is CHS_8227_8_UI4_Android10_ver3_2019
After install use skin changer or launchers from page 14 !
Cheers to all !
ALPS FF5000 model 8227L
Javierlopcast said:
I am also interested in this topic, I have the same unit and I would like to get the original Android 10 Firmware, since I changed it for a lower one, if someone knows how to Root this model, it could help us both.
Click to expand...
Click to collapse
You don't need to root anything just update software (if not already wiped out).
Download and install in device thru USB / SD CARD :
https://drive.google.com/file/d/1Ta2vL7Fc8tWmzmRxaJ-JMYGmlYYnRmud/view?usp=sharing
thank you very much! Do you have a screenshot of how the Launcher looks like?
Reboot problem
I have installed the one sent to me by @antonTNTand it works, but every time I turn on the unit, after 10 seconds a window appears with a countdown and two options, "cancel" or "update" and the system restarts automatically, and it starts in "usb detected" mode while the pen drive is unplugged, it is quite annoying since it delays the start of the unit every time I get in the car.
https://ibb.co/6P80pDP
ALPS FF5000 model 8227L
Javierlopcast said:
I have installed the one sent to me by @antonTNTand it works, but every time I turn on the unit, after 10 seconds a window appears with a countdown and two options, "cancel" or "update" and the system restarts automatically, and it starts in "usb detected" mode while the pen drive is unplugged, it is quite annoying since it delays the start of the unit every time I get in the car.
https://ibb.co/6P80pDP
Click to expand...
Click to collapse
Turn your usb stick or SD card with software back in port... Then when boots up just click on update. If window not removed after update, go to main menu with password 8888 and find others menu or the one in which to set all settings for device and declick one for updates/software/firmware.
Or maybe usb or SD card with software in it is just stuck in memory and android detects update and wishes to install. If this is the case, unplug usb /SD card clicking on usb icon on lcd and then press eject and then safely remove stick.
Keep me updated will help you out.
Anton TNT said:
Turn your usb stick or SD card with software back in port... Then when boots up just click on update. If window not removed after update, go to main menu with password 8888 and find others menu or the one in which to set all settings for device and declick one for updates/software/firmware.
Or maybe usb or SD card with software in it is just stuck in memory and android detects update and wishes to install. If this is the case, unplug usb /SD card clicking on usb icon on lcd and then press eject and then safely remove stick.
Keep me updated will help you out.
Click to expand...
Click to collapse
I already found the problem, it had the .BIN files copied to the root of the internal memory of the radio, and every time it is turned on it detects them and restarts in USB reading mode. I deleted them and the problem is over
Would someone please send license.dat file, my headunit saya it's not activated after I upgraded firmware?
ALPS FF5000 model 8227L
ashensii said:
Would someone please send license.dat file, my headunit saya it's not activated after I upgraded firmware?
Click to expand...
Click to collapse
You don't need one it will generate automatically when installed software that matches your device and mcu.
Look for software on links that I pinned here in posts, or try find and install the correct one here :
https://yadi.sk/d/umCvHqCDzHccr
NOTE: if your device is not ALPS 5500 then you must follow posts for links that matcgh your device !
Anton TNT said:
You don't need one it will generate automatically when installed software that matches your device and mcu.
Look for software on links that I pinned here in posts, or try find and install the correct one here :
https://yadi.sk/d/umCvHqCDzHccr
NOTE: if your device is not ALPS 5500 then you must follow posts for links that matcgh your device !
Click to expand...
Click to collapse
Well I did code 9191 which clears license code afaik. I installed fw that you uploaded, it went well but still my headunit says activation file not found. But atleast my volume button.(knob) is working now with that fw. Fm freq is restricted to under.90 mhz, but if you are quick enough, you can save bigger frequencies aswell.
My hu is alps 8227l ff-5000, bought from aliexpress, seller claimed it to be hizpo branded but there is no hizpo logo anywhere in frame.
Anton TNT said:
You don't need one it will generate automatically when installed software that matches your device and mcu.
Look for software on links that I pinned here in posts, or try find and install the correct one here :
https://yadi.sk/d/umCvHqCDzHccr
NOTE: if your device is not ALPS 5500 then you must follow posts for links that matcgh your device !
Click to expand...
Click to collapse
I found license.dat from 4pda and with fw you provided all my problems are solved. Thank you.
ashensii said:
I found license.dat from 4pda and with fw you provided all my problems are solved. Thank you.
Click to expand...
Click to collapse
Well glad I could help in some way.... Hit the thanks meter if helped...
hi guys sorry to jump in but I am not finding or getting any help. I think I to reflash my device but cant find a download anyware and NOT getting any help from seller,
please can anyone (HELP) me in finding this software or even an upgraded version
Kirinavi
Android: YT9216CH_AHD_00005_V004_HIFI
Android os: Android 9.1
XY AUTO: B6.2 (X2)
CAN Pro: BNR-OLD English high with-V2.20.9-connect
DDR: 2g FLASH: 32GB
cpu A7 1.3GHz x4
Amplifier AC7315 MOS bile duct 50W X 4
display 1024*768( 6 bits)
MCU: 3.5 (X2)
kernal 4.14.116 (gcc version 6.3.1 20170404 linaro GCC 6.3-2017.05 ) ) [email protected] #12
sheerness said:
hi guys sorry to jump in but I am not finding or getting any help. I think I to reflash my device but cant find a download anyware and NOT getting any help from seller,
please can anyone (HELP) me in finding this software or even an upgraded version
Kirinavi
Android: YT9216CH_AHD_00005_V004_HIFI
Android os: Android 9.1
XY AUTO: B6.2 (X2)
CAN Pro: BNR-OLD English high with-V2.20.9-connect
DDR: 2g FLASH: 32GB
cpu A7 1.3GHz x4
Amplifier AC7315 MOS bile duct 50W X 4
display 1024*768( 6 bits)
MCU: 3.5 (X2)
kernal 4.14.116 (gcc version 6.3.1 20170404 linaro GCC 6.3-2017.05 ) ) [email protected] #12
Click to expand...
Click to collapse
Hi, please, this is forum for ALPS 5000 8227L device only try to put your search for right device
I can help you out with this, can I get some info where this kirinavi is bought ? Ali Express?
And can I get screenshot of device settings (MCU, media, bluetooth, device model, real android version of device etc.) - go to infotainment or similar settings menu and put screenshots.
Anton TNT said:
Hi, please, this is forum for ALPS 5000 8227L device onlčy try to put your search for right device
I can help you out with this, can I get some info where this kirinavi is bought ? Ali Express?
And can I get screenshot of device settings (MCU, media, bluetooth, device model, real android version of device etc.) - go to infotainment or similar settings menu and put screenshots.
Click to expand...
Click to collapse
"THANK YOU SOOOO MUCH"
for getting back to me, i have tried for months to try and get some help with this and you are the only one that has got back to me!...
yes i did get the system from aliexpress but not getting help from them since they have had the money,
i think i have added the pics to this, if there is anymore info you are needing please let me know,
again thank you so much :angel:
Hi,
I'm having some problems with this HU. The first one is that the APP PowerAMP installed, when I turn the car off (HU turned on in position) the music of the APP is not recorded, HU's Android closes the APP and the last song does not play. The second problem is that the startup of the HU is very slow, I would like some tip on how to improve this.
In the APP PowerAmp forum there is a possible solution, which I will post below:
"you don't need to change any code - just enter the intent (often looking like cn.nihao.action.SHUTDOWN instead of android.intent.action.SHUTDOWN) into" Shutdown intent "Poweramp option. Usually can be googled by" shutdown intent YOUR HEADUNIT NAME ".
Poweramp supports like 5-6 of these, but it looks like each headunit model / firmware (again for unknown reason) changes the intent name, so this is why Shutdown Intent option is there. " link : https://forum.powerampapp.com/topic/20947-aktivation-issue-on-headunit-with-v3-893/page/2/
Could anyone tell me what is the Shutdown intent of this HU model?
I attached images for a better understanding.
Thank you very much in advance.
i have a android head unit , but it not booting.. please send me a link to download to android firmware for it..
My device is a T3L with 1GB Ram and 16GB of Internal memory,
MCU version:
T3L.3.19.-296-10-A49311-210105 (MM030)
System:
V8.1.1_20210430.162039_THEME1
Android Version: 11
i have a android head unit , but it not booting.. please send me a link to download to android firmware for it..
My device is a T3L with 1GB Ram and 16GB of Internal memory,
MCU version:
T3L.3.19.-296-10-A49311-210105 (MM030)
System:
V8.1.1_20210430.162039_THEME1
Android Version: 11
Hello,
It happened to me when I updated my system, after system updating my air conditioner app stop working my head unit system is Quad core T3 p1 android 9, I solved the problem, and I would like to share the solution if someone facing same problem.
The solution is to go to settings, car settings, extra settings ( password 123456 ) then select car model or something related to model, then you will be getting into car selecting menu ( pic is attached for reference ).
Please be careful when choosing the car model, it should be exactly the same as yours.after that you will get an APK downloading, also MCU update, system will be restarted automatically after the update is complete, done
notice: your head unit should be connected to WiFi for the MCU updating process.
Regards,,