Database Users

fastboot help

I was flashing TWRP
I couldn't boot into system after flashing..
This is what I did:
1. fastboot boot recovery.img
2. Swipe to allow modifications in twrp
3. Flash TWRP installer zip
4. Reboot into partition B
5. Reboot bootloader
6. fastboot boot recovery.img
7. Swipe to allow modifications in twrp
8. Flash TWRP installer zip
9. Then I rebooted into recovery to check if recovery boots and it did.
But afterwards couldn't boot back into system. It was again booting into recovery.
I booted into recovery using fastboot boot, that's why it might won't boot into system. Is there a command to boot into system after above procedure?
Files used: https://m.youtube.com/watch?v=tRcYUMBgvaI
? How to Root Mi A1! Unlock Bootloader, TWRP Recovery ... - YouTube
By Dhananjay Bhosale
Kindly also suggest source of files you used, if you know another working method.

I have the same problem. Meanwhile, flash the stock fastboot images.

Why do you want to have TWRP installed? I am following these steps each month (fastboot ROM was always out sooner than my OTA) without any issues.
1. flash stock ROM via fastboot
2. fastboot boot twrp-3.1.1.img and don't allow system modifications or you won't be able to apply OTA
3. install magisk 15.1
4. reboot to system
If first boot takes more than 2-3 minutes, hold power off button until phones restarts, second start will take the usual time.

I also don't allow any modifications from TWRP, and just boot to TWRP when I need to. I do not install TWRP.
Sounds like you'll have to do a miflash of the rom, then try not installing TWRP and not allowing any modifications in TWRP to system. Just use TWRP to flash Magisk.

[GUIDE] Official Stock Android 10 flashing , Rooting with magisk and TWRP

In this guide i will go over how to flash stock android 10 if you are unlocked after flashing installing magisk and disabling force encryption :-
THIS GUIDE HAS BEEN TWEAKED AND UPDATED FOR PIXEL EXPERIENCE TOO
HTML:
Your warranty is now void.
We are not responsible for bricked devices, bootloop... Please
do some research if you have any concerns about mods
included in these GUIDES before using them! YOU are choosing to
make these modifications.
THIS GUIDE IS ONLY FOR THOSE WHO HAVE UNLOCKED THEIR BOOTLOADER
Moving from Custom ROM to Stock 10 :- OR Flashing PE 10
First downlaod Stock 10 CLICK HERE OR Pe 10
Reboot to twrp
Wipe everything expect internal storage
Flash ROM Zip
>Now if You Want to be Encrypted you can skip to Formatting Data Step This is for whom you don't want to format and want to be decrypted
>Change Slot and Reboot To Bootloader
>Boot To Official TWRP Image
>Now Flash FBE Disabler (Normally Or Via ADB Sideload ) and Reboot
Now You have to Format Your Data (IMPORTANT IF YOU CHOOSE TO BEING ENCRYPTED)
Change Slot
Now Reboot
IMPORTANT DON'T TRY TO FLASH TWRP INSTALLER JUST AFTER FLAHING THE STOCK ROM OR ELSE YOU WILL NOT BE ABLE TO BOOT ROM IN PE YOU CAN FLASH TWRP INSTALLER BUT IT TWRP WON'T BOOT AS OUR TWRP ISN'T YET READY FOR FBE
IF YOU ARE ALREADY ON STOCK(ENCRYPTED) AND WANT TO INSTALL MAGISK OR WANT TO DECRYPT SO CAN USE TWRP AGAIN
Once you have installed Stock 10 via TWRP in a rush and later you find out nothing is working there no TWRP no magisk and thus you can't move to custom ROM now , well check this out now
STEPS TO ONLY INSTALL MAGISK WITHOUT ANY DECRYPTION
Downlaod pathced boot image from link CLICK HERE
Reboot to Fastboot
Now type this code
HTML:
fastboot flash boot magisk_patched.img
After Success message reboot normally
Now Install Magisk Manager (apk)
YOU ARE ROOTED !
STEPS TO INSTALL MAGISK REMOVE DECRYPTION AND USE TWRP (For Stock and Pixel Experience Both)
IN ORDER TO SWITCH TO OTHER CUSTOM ROMs WHICH AREN'T FORCE-ENCRYPTED YOU HAVE TO DECRYPT FIRST !
IF YOU ARE ALREADY MOVING TO A ENCRYPTED ROM THEN YOU DON'T HAVE TO DECRYPT .
Reboot to Fastboot
Now type this code
HTML:
fastboot -w
This will earse all your data and decrypt
Now wait don't reboot
Now downlaod TWRP image and place it in you platform folder
Now boot to TWRP using this code
HTML:
fastboot boot twrp.img
As soon as you are in twrp flash force encrypt disabler
After Flashing Disabler Flash Magisk and reboot
NOW YOU ARE ON STOCK WITH NO ENCRYPTION AND MAGISK INSTALLED!
IF JUST IN CASE YOU WANT TO MOVE TO CUSTOM ROMs JUST AFTER FORMAT DATA AND BOOTING TWRP STEP FLASH YOUR DESIRED ROM
RECOMMENDED TWRP :- XDA HERE
THANKS Zacktg5 for Zip
HIT THANKS:cyclops:

I followed "STEPS TO ONLY INSTALL MAGISK WITHOUT ANY DECRYPTION" and got a bootloop

Thank you man!
Coming from a custom ROM (PE 10), is it possible to flash the stock 10 using fastboot, or this will cause issues?

can't install miui_JASMINEGlobal_V11.0.4.0.QDIMIXM_545aa0d958_10.0.zip
Step 1/2
Error applying update: 7 (ErrorCode :: kInstallDeviceOpenError)
Updater process ended with ERROR: 1
Error installing zip file /sdcard/miui_JASMINEGlobal_V11.0.4.0.QDIMIXM_545aa0d958_10.0.zip
---------- Post added at 03:19 PM ---------- Previous post was at 03:18 PM ----------
Zedsdeadbaby said:
I followed "STEPS TO ONLY INSTALL MAGISK WITHOUT ANY DECRYPTION" and got a bootloop
Click to expand...
Click to collapse
you can install miui_JASMINEGlobal_V11.0.4.0.QDIMIXM_545aa0d958_10.0.zip ?
why I got error ?

link to Universal DM-Verity, ForceEncrypt, Disk Quota Disablers in case someone asks: http://zackptg5.com/android.php#disverfe
XDA: https://forum.xda-developers.com/android/software/universal-dm-verity-forceencrypt-t3817389

Great

Antusuprik said:
can't install miui_JASMINEGlobal_V11.0.4.0.QDIMIXM_545aa0d958_10.0.zip
Step 1/2
Error applying update: 7 (ErrorCode :: kInstallDeviceOpenError)
Updater process ended with ERROR: 1
Error installing zip file /sdcard/miui_JASMINEGlobal_V11.0.4.0.QDIMIXM_545aa0d958_10.0.zip
---------- Post added at 03:19 PM ---------- Previous post was at 03:18 PM ----------
you can install miui_JASMINEGlobal_V11.0.4.0.QDIMIXM_545aa0d958_10.0.zip ?
why I got error ?
Click to expand...
Click to collapse
use some other twrp

I have flashed Android 10 ZIP in TWRP in slot A. After that i changed to slot B and restart to TWRP. In slot B i flashed Encryption Disabler zip and Magisk zip in order.
Same product, less steps

blackman01 said:
Downlaod pathced boot image from link CLICK HERE
HIT THANKS:cyclops:
Click to expand...
Click to collapse
Is this a December patched boot IMG?

d3rt0xx said:
I have flashed Android 10 ZIP in TWRP in slot A. After that i changed to slot B and restart to TWRP. In slot B i flashed Encryption Disabler zip and Magisk zip in order.
Same product, less steps
Click to expand...
Click to collapse
Just the Android 10 ZIP or with the twrp zip? Didn't you lose twrp if you didn't flash the twrp zip?

Thufailb said:
Just the Android 10 ZIP or with the twrp zip? Didn't you lose twrp if you didn't flash the twrp zip?
Click to expand...
Click to collapse
Without TRWP installer. I reboot to bootloader after every single step and boot TWRP.img manually with fastboot boot TWRP.img
So stock recovery is preset
Step by step:
- Boot twrp.img in fastboot from PC "fastboot boot twrp.img"
- Delete all partitions and be sure active boot slot is "A"
- Reboot to Bootloader, NOT Recovery
- Boot twrp.img in fastboot from PC "fastboot boot twrp.img" again
- Install Android 10 zip
- Change active boot slot to "B"
- Reboot to Bootloader, NOT Recovery again
- Boot twrp.img in fastboot from PC "fastboot boot twrp.img" again
- Flash Encryption Disabler zip
- Flash Magisk zip in order
- Reboot! Profit!
Fresh Android 10, decrypted and rooted with stock recovery :good:

Which recovery did you use tho?
Also does that recovery boot from stock android 9???
Please help,asap.

Guys, I have mi a2 on official pie and arb4. How to update?

Rupamxx said:
Which recovery did you use tho?
Also does that recovery boot from stock android 9???
Please help,asap.
Click to expand...
Click to collapse
Recent twrp.
Twrp boots from every version

d3rt0xx said:
Without TRWP installer. I reboot to bootloader after every single step and boot TWRP.img manually with fastboot boot TWRP.img
So stock recovery is preset
Step by step:
- Boot twrp.img in fastboot from PC "fastboot boot twrp.img"
- Delete all partitions and be sure active boot slot is "A"
- Reboot to Bootloader, NOT Recovery
- Boot twrp.img in fastboot from PC "fastboot boot twrp.img" again
- Install Android 10 zip
- Change active boot slot to "B"
- Reboot to Bootloader, NOT Recovery again
- Boot twrp.img in fastboot from PC "fastboot boot twrp.img" again
- Flash Encryption Disabler zip
- Flash Magisk zip in order
- Reboot! Profit!
Fresh Android 10, decrypted and rooted with stock recovery :good:
Click to expand...
Click to collapse
Hi, very helpful guide.
But how do you get OTA update when there's a new one? Can you provide the steps to get OTA and then get back to root. Thanks in advance.

disaster_peace said:
Hi, very helpful guide.
But how do you get OTA update when there's a new one? Can you provide the steps to get OTA and then get back to root. Thanks in advance.
Click to expand...
Click to collapse
Easy!
Just install normally via updater.
But before you restart your phone, install TWRP Retention Script via Magisk Manager to change active boot slot

can i skip installing magisk in this guide to get my banking apps working??

Sivakumar$ said:
can i skip installing magisk in this guide to get my banking apps working??
Click to expand...
Click to collapse
Yes, if you only install official OTA, banking apps work. Why not? Its official and unrooted
But decryption Script will useless without root i think

Im on derp fest Q rom now i want to go to stock 10 i cannot find any latest fastboot file and there is some issues with the mi flash tool as some users were reporting getting dev error

I'm tried using two versions of TWRP(3.2.3-0 and 3.3.1-0) and got two different errors:
• No digest file found (3.2.3-0)
• Error 7 (3.3.1-0)
What should I do? I don't have any ROM's installed

Failed Update from 10.3.12 to 11 - Assistance Appreciated

Attempted to update from the latest stable 10.3.12 to 11 by flashing the full OTA zip in TWRP.
Install failed and phone locked up.
Attempting to boot to recovery or system results in Qualcomm Crashdump Mode.
I can get to Fastboot, but I'm not sure if I should try flashing twrp.img or pull boot.img from the OTA or what.
Anyone have any suggestions?

SMcC2 said:
Attempted to update from the latest stable 10.3.12 to 11 by flashing the full OTA zip in TWRP.
Install failed and phone locked up.
Attempting to boot to recovery or system results in Qualcomm Crashdump Mode.
I can get to Fastboot, but I'm not sure if I should try flashing twrp.img or pull boot.img from the OTA or what.
Anyone have any suggestions?
Click to expand...
Click to collapse
An attempt to flash TWRP and reflashing should go.

Hi,
I'm having kinda same issue.
I'm on stable A11 oneplus 6t,
i'm trying to boot into twrp in order to install new recovery and root with magisk.
when fasboot boot twrp.img i'm getting a qualcomm crashdump.
tried different twrp img's with no success..
maybe someone figure it out?
thanks

BenoMosko said:
Hi,
I'm having kinda same issue.
I'm on stable A11 oneplus 6t,
i'm trying to boot into twrp in order to install new recovery and root with magisk.
when fasboot boot twrp.img i'm getting a qualcomm crashdump.
tried different twrp img's with no success..
maybe someone figure it out?
thanks
Click to expand...
Click to collapse
I did not have time to wait so before bed I just reset everything.
I ended up using the MSM tool located here:
The Complete Guide to Unbrick OnePlus 6/6T from a Hard-Brick using MSMDownload Tool
Unlocked bootloader, installed TWRP & Magisk, installed A11 zip, everything is working again now.
Good luck!

BenoMosko said:
Hi,
I'm having kinda same issue.
I'm on stable A11 oneplus 6t,
i'm trying to boot into twrp in order to install new recovery and root with magisk.
when fasboot boot twrp.img i'm getting a qualcomm crashdump.
tried different twrp img's with no success..
maybe someone figure it out?
thanks
Click to expand...
Click to collapse
Hey, I'm having the same issue. Did you end up figuring out how to solve this?

Artificial_Intelligence said:
Hey, I'm having the same issue. Did you end up figuring out how to solve this?
Click to expand...
Click to collapse
Flash temporary recovery first ( lineage recovery ) then from fastboot.. boot into recovery.
You will see lineage recovery.
Select apply update - > update from adb ....
Then "adb sideload <twrp image>.img...
(probably it ask to verify choose yes)
Go back select advanced restart ( not sure the right word ) -> reboot to recovery.
Then you will have twrp installed.
If you only want to root why not flash magiskpatched image there no need TWRP just to root.

s.seila said:
Flash temporary recovery first ( lineage recovery ) then from fastboot.. boot into recovery.
You will see lineage recovery.
Select apply update - > update from adb ....
Then "adb sideload <twrp image>.img...
(probably it ask to verify choose yes)
Go back select advanced restart ( not sure the right word ) -> reboot to recovery.
Then you will have twrp installed.
If you only want to root why not flash magiskpatched image there no need TWRP just to root.
Click to expand...
Click to collapse
Hm but how would I install lineage recovery? Flashing recovery through fastboot doesn't work on the new devices anymore right?
I also tried booting lineage recovery without flashing but that also didn't work (although it didn't get stuck on crashdump but booted into the regular OS instead).
I did notice that it seems to be related to OOS 11 firmware. On 10 booting into TWRP works just fine and as soon as I upgrade to 11 it stops working (maybe this means it's fixable?). What I used as a workaround for now is to have 10 firmware in one slot, upgrade other slot to 11 and flash TWRP to both slots from the 10 slot. Seems to work so far but is not ideal IMO. I'm not a developer sadly but maybe someone smarter than me will come up with a solution.

What do you mean by "new device"?? New OOS version right??
I use this method all the time with oos 11.x.x.x.x to install TWRP so i can install Custom ROM later.
no need to go to oos 10 you can flash it from newest oos11.
---------------------------------------------------------------------------------------------------------------
First boot into fastboot mode.
to install lineage recovery
fastboot flash boot <lineage recovery image>.img
download from here https://download.lineageos.org/fajita
menualy select and boot to recovery. It will boot to lineage recovery.

lmao it appear in two posts. deleted 1.

About to give up on flashing recovery to OOS 11.1.1.1

I tried "fastboot boot" almost all of KizuYuna's .imgs, tried fastboot boot the lineagerecovery.img. All I get is the fastboot logo and the phone just restarts into OOS... TWRP is same.
About to MSM downgrade to OOS 10 to get recovery working like I did before. Thought it would be better to flash a rom from OOS 11 to get better firmware compatibility but just wont work.

Simply go back to OS 10.3.5 using the MSM Download Tool. Upgrade via OTA to 11..1.1.1, fastboot flash boot magisk_patched-23000_11.1.1.1 from XDA 235Sanders15 post. (you are now rooted with Magisk. Via Magisk install TWRP-Installer-3.5.2_9-0 you are now unrooted but have TWRP installed. Using TWRP flash Magisk v23.0.You are now rooted on OS 11.1.1.1 with TWRP installed. Do not change the Kernel it will cause a Bootloop.

bpambrose said:
Simply go back to OS 10.3.5 using the MSM Download Tool. Upgrade via OTA to 11..1.1.1, fastboot flash boot magisk_patched-23000_11.1.1.1 from XDA 235Sanders15 post. (you are now rooted with Magisk. Via Magisk install TWRP-Installer-3.5.2_9-0 you are now unrooted but have TWRP installed. Using TWRP flash Magisk v23.0.You are now rooted on OS 11.1.1.1 with TWRP installed. Do not change the Kernel it will cause a Bootloop.
Click to expand...
Click to collapse
So you are saying MSM to 10 and then flash official 11.1.1.1 or fastboot flash boot magisk_patched-23000_11.1.1.1 (this is a full 11.1.11.1 OS flash? No need to use twrp from 10?)
Thanks

So I just went thru an Android 10 to 11.1.1.1 upgrade, and it was a bit frustrating. So I'll throw out what I learned along the way.
Note, I have a T-Mobile Variant, so sometimes you need different files/steps for T-Mo.
I flashed the full OTA via Settings > Update > Local Upgrade, which ended up boot-looping.
Via Fastboot, I did fastboot flash boot magisk_patched-23000_11.1.1.1.img; followed by fastboot reboot;
This was still boot-looping, so I shutdown the phone, and booted into recovery, which was now PBRP.
via PBRP, I flashed the full OTA again from my SDCard; then installed PBRP zip;
Reboot to System and got a Successful Boot. Yey.
Reboot to Recovery; Backup Boot.
Reboot to System
Install Magisk App; within Magisk > Install > select my Boot Backup to Patch (per Magisk instructions); I used a file manager to copy to my PC from my phone
Reboot to Fastboot; fastboot flash boot magisk_patched-23000_rJoA.img (the file Magisk created)
Reboot to System; Success!
I guess my morale of the story is, get a clean boot working, go from there. Patch your own boot, don't rely on someone else's.

Fenopy said:
So I just went thru an Android 10 to 11.1.1.1 upgrade, and it was a bit frustrating. So I'll throw out what I learned along the way.
Note, I have a T-Mobile Variant, so sometimes you need different files/steps for T-Mo.
I flashed the full OTA via Settings > Update > Local Upgrade, which ended up boot-looping.
Via Fastboot, I did fastboot flash boot magisk_patched-23000_11.1.1.1.img; followed by fastboot reboot;
This was still boot-looping, so I shutdown the phone, and booted into recovery, which was now PBRP.
via PBRP, I flashed the full OTA again from my SDCard; then installed PBRP zip;
Reboot to System and got a Successful Boot. Yey.
Reboot to Recovery; Backup Boot.
Reboot to System
Install Magisk App; within Magisk > Install > select my Boot Backup to Patch (per Magisk instructions); I used a file manager to copy to my PC from my phone
Reboot to Fastboot; fastboot flash boot magisk_patched-23000_rJoA.img (the file Magisk created)
Reboot to System; Success!
I guess my morale of the story is, get a clean boot working, go from there. Patch your own boot, don't rely on someone else's.
Click to expand...
Click to collapse
So you had to go through all the trouble because you had a bootloop issue when OTA updating to 11? I already got to 11 but am trying to fastboot boot a recovery because I want to flash a custom ROM... When I fastboot boot TWRP.img or LOS Recovery .img it just shows fastboot logo and restarts the phone with no recovery shown..

All Custom ROM installations fail the same way.

I am trying to get a custon ROM to work on my Oneplus 8 Pro (instantnoodlep)
ROMs I tried installing:
Cherish OS 3.9.5
Nameless-AOSP_instantnoodlep-12.1-20220708-0935-Official
What I do:
1. Download recovery provided with the ROM
2. Reboot to bootloader and flash recovery
'fastboot flash recovery recovery.img'
'fastboot reboot recovery'
3. Select apply update/apply from ADB
4. Connect device to PC
5. Sideload rom.zip
'adb sideload rom.zip'
6 Do Factory reset/format data from recovery
7. Restart to system
What happens:
Phone goes to fastboot and stays there.
When I try
fastboot reboot system
or
fastboot reboot recovery
I also land in fastboot again.
The only way to get out of fastboot again is fastboot boot recovery.img, which boots into recovery. When I then reboot into system, my old OOS11 boots up.
Because this is independent of the Custon ROM, there might be another issue. But which one?

You made sure you have latest OOS11 on BOTH slots?

xtcislove said:
You made sure you have latest OOS11 on BOTH slots?
Click to expand...
Click to collapse
Thanks for the response! How do i check that? Both slots of what?

Infraviored said:
Thanks for the response! How do i check that? Both slots of what?
Click to expand...
Click to collapse
When you're booted in OOS 11 just do a local install of the same OOS version that you're on. That will install OOS to the other slot, meaning you'll have the same OOS version on both slots and "should" be able to flash a custom rom.

Infraviored said:
I am trying to get a custon ROM to work on my Oneplus 8 Pro (instantnoodlep)
ROMs I tried installing:
Cherish OS 3.9.5
Nameless-AOSP_instantnoodlep-12.1-20220708-0935-Official
What I do:
1. Download recovery provided with the ROM
2. Reboot to bootloader and flash recovery
'fastboot flash recovery recovery.img'
'fastboot reboot recovery'
3. Select apply update/apply from ADB
4. Connect device to PC
5. Sideload rom.zip
'adb sideload rom.zip'
6 Do Factory reset/format data from recovery
7. Restart to system
What happens:
Phone goes to fastboot and stays there.
When I try
fastboot reboot system
or
fastboot reboot recovery
I also land in fastboot again.
The only way to get out of fastboot again is fastboot boot recovery.img, which boots into recovery. When I then reboot into system, my old OOS11 boots up.
Because this is independent of the Custon ROM, there might be another issue. But which one?
Click to expand...
Click to collapse
U don't need the command fastboot reboot recovery. U can just use the volume buttons to select recovery and press power button to boot to recovery

Nimueh said:
When you're booted in OOS 11 just do a local install of the same OOS version that you're on. That will install OOS to the other slot, meaning you'll have the same OOS version on both slots and "should" be able to flash a custom rom.
Click to expand...
Click to collapse
Another way to set your phone up for a custom rom can be found here. https://wiki.lineageos.org/devices/instantnoodlep/install
Just make sure your booting from a good 00S11 install when you do this.

I had a heck of a time with this two days ago. OP pushed c33, A12 on my phone. It took forever to corrupt both a and b enough to get twrp recovery installed and working to install A11 again. I had to load the recovery on both slots, a and b and I used twrp install to install the OTA to slot a. Right now I have nothing on slot b other that twrp recovery.

king_xerxes said:
I had a heck of a time with this two days ago. OP pushed c33, A12 on my phone. It took forever to corrupt both a and b enough to get twrp recovery installed and working to install A11 again. I had to load the recovery on both slots, a and b and I used twrp install to install the OTA to slot a. Right now I have nothing on slot b other that twrp recovery.
Click to expand...
Click to collapse
Sorted it out by this. Thank you!