I just received this head unit
Ebay "Android 3G WIFI 6.2" Double 2 DIN Car Radio Stereo DVD Player GPS Navigation+Cam"
Item Number: 252162785871
I have not been able to find anything about this model number (TH8681). Does anyone know what roms/rooting with work with it?
Thanks
Dave
This does look like the previous Version of the "Tonghai Infinidi" Model.
Main Difference is it's a Dual Core and the "Tonghai Infinidi" is a Quadcore. But the outside looks identical.
As I have the QuadCore Version and kingroot.net worked for me, I would try this first.
Do you know the code to access developer mode? I asked the seller and they said it wasn't for consumers. I tried the 123456 code as well as the 8888 code, but nothing is working. The typical 7-click on the build version didn't work either.
Skylion said:
This does look like the previous Version of the "Tonghai Infinidi" Model.
Main Difference is it's a Dual Core and the "Tonghai Infinidi" is a Quadcore. But the outside looks identical.
As I have the QuadCore Version and kingroot.net worked for me, I would try this first.
Click to expand...
Click to collapse
Good to know thank you. My head unit arrives tomorrow and rooting it will be the first order of business.
hayslett4 said:
Do you know the code to access developer mode? I asked the seller and they said it wasn't for consumers. I tried the 123456 code as well as the 8888 code, but nothing is working. The typical 7-click on the build version didn't work either.
Click to expand...
Click to collapse
For the Quadcore Version the codes are as follows, but no clue if they work on the Dual Core Version as well:
Factory Reset password: 7890
Developer Options password: 7890
USB Debugging password: [email protected]
Extra Settings password: 123456
Please note the attached Quick-Start Guide only claims "126" as the code, but that did not work anywhere for me with the QuadCore Version.
Skylion said:
For the Quadcore Version the codes are as follows, but no clue if they work on the Dual Core Version as well:
Factory Reset password: 7890
Developer Options password: 7890
USB Debugging password: [email protected]
Extra Settings password: 123456
Please note the attached Quick-Start Guide only claims "126" as the code, but that did not work anywhere for me with the QuadCore Version.
Click to expand...
Click to collapse
I had asked on the Pumpkin forum and they claim it was 121212
I still have to try it though. The codes you provided did not work for me. I'll let you all know what becomes of the 121212 code.
Codes confirmed
Skylion said:
For the Quadcore Version the codes are as follows, but no clue if they work on the Dual Core Version as well:
Factory Reset password: 7890
Developer Options password: 7890
USB Debugging password: [email protected]
Extra Settings password: 123456
Please note the attached Quick-Start Guide only claims "126" as the code, but that did not work anywhere for me with the QuadCore Version.
Click to expand...
Click to collapse
Hi everybody. New to the forum.
I just acquired one of these units (listed as Tocado TH8681 ) and these codes are confirmed! I was able to gain access to the developer options and enable USB debug and also install a rooting program (kingroot 4.5 worked for me) and rooted the device. Next order of business was to backup the device completely before I attempt to upload different firmware or MCUs (the one included sucks IMO). I installed the Android SDK on my W10 and the Google USB driver. I connected to the device by using a microUSB to USB cable connected to my PC and tried to 'adb devices' but was unable to connect or view the device.
I opted for installing Titanium backup and performing a full backup to SD while rooted. I'm not sure if that will be sufficient to recover the device in case I mess up the firmware. Next, I tested the method to reset/reload the MCU from flash. I believe that holding the reset button will suffice to bring it back to factory settings but will test further.
I believe that the CPU is an RK3066 but not sure since all system info apps I've tried list the CPU as "Full AOSP on MStar Cedric3 ". Is there any way or app that can help me to be sure what kind of chipset I have (short of opening the device and looking at the chip) that way I can look for the right MCU and change the manufacturers GUI to a better looking one?
In any case, this is the info listed on my device under 'About Device':
CPU Information: Cortex-A9 dual core
RAM Information: DDR3 1GB
Android Version: 4.4.4 (although all system infor apps and the root program list it as 4.2.2, hummm.)
MCU Version: 4.3.14-1-10-61010101-150525 (notice no Mfr code at the beginning?!?!?)
System Version: 2.9.5_20150722
DVD Version: 2.13.15-860mc-150417
Any further comments or suggestion on how to change or modify the GUI layout is highly appreciated. I specially dislike the inability to remove/modify the two desktop pages with the big tiles for the Video, Ipod, Radio, TV, Navi, etc apps. for example, I do not use IPod so I would like to remove it from the desktop.
cheers and thanks for any comments.
Hello guys!
New guy here. I've been looking on the forums for answers to my issues but they elude me.
I hope somebody can help me out here. I have a TH8681GA and wanted to change the Launcher. Long story short, I thought that rooting the device (easy enough with Kingroot) and having a TWRP backup with Nandroid would be enough to fall back onto if updating/modding went south. Well, it did not quite work like I planned. Things DID go south and I lost volume and tuning knob as well as audio and BT functions. Factory reset did not work, so, I found a few firmware files and tried that but no dice. This particular unit does not have TWRP or CWM as boot options that I know of.
Now my questions to the forum are:
1. How can I perform a full wipe and reload of this unit?
2. Have anybody been able to perform an adb connection via USB on this particular model? I've tried with no luck.
3. Is there any way to boot maybe to a TWRP image on an SD card an restore the TWRP backup to the ROM from there?
I've tried to contact the seller and the Mfr to request firmware files for this unit but seems to me that EVERYBODY in China is making TH8681 units and they may vary in internal components and features.
Thanks beforehand for any pointers. Hope somebody can help me recover this day-old brick.
Fred from PR(US)
Tocado TH8026 problem
Hi there i have a this car stereo tocado th 8026 and am having problems with it the problem is like this when the stereo started this stay on the android loading and dont pass dont so i think is problem whit the room so i want i know if someone can help me with the rom original room or custom room or tell me whats rooms should work on it item number on ebay 112041907446
Help
I changed the res what do I do?
Hi everybody.
I conducted extensive google search without avail .
I am Looking for default password in order to install application from google play.
I tryed to find model number and i think its W907NA and manufacturer TCAT , however its not listed there . Its in Nissan Altima,2018 sv.
I tryed all passwords such are Tcat,tcat,TCAT m1234567, 4567890,456789 ,162 and all other variations i could find . None of them are working
I attached photos ..
ibb.co/fSJJLJx
ibb.co/DMbdpNz
I am hoping for some help as i spent hours looking for default password and no luck
Password is for advanced settings where i believe i can enable to download and install application from play store.
Bump for help .
zarko.petkovic said:
Hi everybody.
I conducted extensive google search without avail .
I am Looking for default password in order to install application from google play.
I tryed to find model number and i think its W907NA and manufacturer TCAT , however its not listed there . Its in Nissan Altima,2018 sv.
I tryed all passwords such are Tcat,tcat,TCAT m1234567, 4567890,456789 ,162 and all other variations i could find . None of them are working
I attached photos ..
ibb.co/fSJJLJx
ibb.co/DMbdpNz
I am hoping for some help as i spent hours looking for default password and no luck
Password is for advanced settings where i believe i can enable to download and install application from play store.
Click to expand...
Click to collapse
Bump for help
Hello !
I have trouble with bought alps device car head unit FF5000 (model 8227L).
System freezes, process com.ts.mainUI8 hanging not allowing to enter and listen any kind of music, dsp worked now just blinks and does nothing, buttons dont work as they are non existant (with SWC also), after car shutdown when HU shutsdown memory empties and resets data like date and time etc.
Can anyone help me bring this HU in order again ?
I don't know what to do anymore, it worked perfectly for three days and then in a sudden started problems.
I tried so far erasing data to factory default but problem still exist.
I will post system data on request... for now have this image of system :
MODEL: 8227L - android 8.1 (displays as Android 10) - patch from March 2019 alps/full_8227L_demo/8227L_demo:8.1.0/O11019/1550113051:userdebug/test-keys
HMI: TSKJ.C.Q.F3.C04.2020.27.08.30
MCU: JUST SAYS H BUT IT HAS ITS NUMBER CANT SEE IT
MEDIA: NULL - MUST BE SOMETHING HERE ASWELL
BTV: BT.19.11.12.1200 (mac ADDRESS)
CAN ANYONE HELP ME WITH THIS PLEASE TO UPGRADE/UPDATE DO SOME THING and turn this hu BACK in life ?
Help with Alps FF-5000 Android 10
I am also interested in this topic, I have the same unit and I would like to get the original Android 10 Firmware, since I changed it for a lower one, if someone knows how to Root this model, it could help us both.
I have a full backup of boot_1 boot_2 and emmc_user partitions. It’s for 2g-32g model 8227l
It’s fake android 10 with api27 which is 8.1 Oreo if that helps
Includes SU binary that’s not hampered from factory. Eonon had SU binary but was not functional per se.
nolimitzr2 said:
I have a full backup of boot_1 boot_2 and emmc_user partitions. It’s for 2g-32g model 8227l
It’s fake android 10 with api27 which is 8.1 Oreo if that helps
Includes SU binary that’s not hampered from factory. Eonon had SU binary but was not functional per se.
Click to expand...
Click to collapse
Well, you would do me a great favor if you would provide them to me. I write to you privately.
ALPS FF5000 model 8227L
Javierlopcast said:
I am also interested in this topic, I have the same unit and I would like to get the original Android 10 Firmware, since I changed it for a lower one, if someone knows how to Root this model, it could help us both.
Click to expand...
Click to collapse
I SOLVED MY PROBLEM WITH THIS DEVICE
It was GPS antenna. Its interference or faulty receiver loses MCU settings in memory. Once disconnected all turns normal.
Do the following :
- diconnect gps antenna
- disconnect radio antenna and then reconnect while ignition is on (gps antenna disconnected)
- turn ignition off, press button reset while turning ignition key, release reset and wait for device reseting
- adjust device settings again and enjoy the music !
+ get a new gps antenna !
:good:
FOR SOFTWARE UPDATES PLEASE CONTACT YOUR SELLER OR download from :
(I assume that yours is android 8.1 - upgraded to android 10)
https://yadi.sk/d/umCvHqCDzHccr
!!! PLEASE TAKE NOTE THAT YOU MUST CHOOSE THE RIGHT MCU AND SOFTWARE !!!
ALPS FF5000 model 8227L
nolimitzr2 said:
I have a full backup of boot_1 boot_2 and emmc_user partitions. It’s for 2g-32g model 8227l
It’s fake android 10 with api27 which is 8.1 Oreo if that helps
Includes SU binary that’s not hampered from factory. Eonon had SU binary but was not functional per se.
Click to expand...
Click to collapse
Hello, do not intermix al softwares in order to get device working !
Download and install with usb/SD card : https://yadi.sk/d/umCvHqCDzHccr
IF THIS LINK IS NOT HELPING YOU....
I'M UPLOADING MY SOFTWARE FOR AC8227L DEVICE THAT MY SELLER PROVIDED ME :
https://drive.google.com/file/d/1Ta2vL7Fc8tWmzmRxaJ-JMYGmlYYnRmud/view?usp=sharing
- it is CHS_8227_8_UI4_Android10_ver3_2019
After install use skin changer or launchers from page 14 !
Cheers to all !
ALPS FF5000 model 8227L
Javierlopcast said:
I am also interested in this topic, I have the same unit and I would like to get the original Android 10 Firmware, since I changed it for a lower one, if someone knows how to Root this model, it could help us both.
Click to expand...
Click to collapse
You don't need to root anything just update software (if not already wiped out).
Download and install in device thru USB / SD CARD :
https://drive.google.com/file/d/1Ta2vL7Fc8tWmzmRxaJ-JMYGmlYYnRmud/view?usp=sharing
thank you very much! Do you have a screenshot of how the Launcher looks like?
Reboot problem
I have installed the one sent to me by @antonTNTand it works, but every time I turn on the unit, after 10 seconds a window appears with a countdown and two options, "cancel" or "update" and the system restarts automatically, and it starts in "usb detected" mode while the pen drive is unplugged, it is quite annoying since it delays the start of the unit every time I get in the car.
https://ibb.co/6P80pDP
ALPS FF5000 model 8227L
Javierlopcast said:
I have installed the one sent to me by @antonTNTand it works, but every time I turn on the unit, after 10 seconds a window appears with a countdown and two options, "cancel" or "update" and the system restarts automatically, and it starts in "usb detected" mode while the pen drive is unplugged, it is quite annoying since it delays the start of the unit every time I get in the car.
https://ibb.co/6P80pDP
Click to expand...
Click to collapse
Turn your usb stick or SD card with software back in port... Then when boots up just click on update. If window not removed after update, go to main menu with password 8888 and find others menu or the one in which to set all settings for device and declick one for updates/software/firmware.
Or maybe usb or SD card with software in it is just stuck in memory and android detects update and wishes to install. If this is the case, unplug usb /SD card clicking on usb icon on lcd and then press eject and then safely remove stick.
Keep me updated will help you out.
Anton TNT said:
Turn your usb stick or SD card with software back in port... Then when boots up just click on update. If window not removed after update, go to main menu with password 8888 and find others menu or the one in which to set all settings for device and declick one for updates/software/firmware.
Or maybe usb or SD card with software in it is just stuck in memory and android detects update and wishes to install. If this is the case, unplug usb /SD card clicking on usb icon on lcd and then press eject and then safely remove stick.
Keep me updated will help you out.
Click to expand...
Click to collapse
I already found the problem, it had the .BIN files copied to the root of the internal memory of the radio, and every time it is turned on it detects them and restarts in USB reading mode. I deleted them and the problem is over
Would someone please send license.dat file, my headunit saya it's not activated after I upgraded firmware?
ALPS FF5000 model 8227L
ashensii said:
Would someone please send license.dat file, my headunit saya it's not activated after I upgraded firmware?
Click to expand...
Click to collapse
You don't need one it will generate automatically when installed software that matches your device and mcu.
Look for software on links that I pinned here in posts, or try find and install the correct one here :
https://yadi.sk/d/umCvHqCDzHccr
NOTE: if your device is not ALPS 5500 then you must follow posts for links that matcgh your device !
Anton TNT said:
You don't need one it will generate automatically when installed software that matches your device and mcu.
Look for software on links that I pinned here in posts, or try find and install the correct one here :
https://yadi.sk/d/umCvHqCDzHccr
NOTE: if your device is not ALPS 5500 then you must follow posts for links that matcgh your device !
Click to expand...
Click to collapse
Well I did code 9191 which clears license code afaik. I installed fw that you uploaded, it went well but still my headunit says activation file not found. But atleast my volume button.(knob) is working now with that fw. Fm freq is restricted to under.90 mhz, but if you are quick enough, you can save bigger frequencies aswell.
My hu is alps 8227l ff-5000, bought from aliexpress, seller claimed it to be hizpo branded but there is no hizpo logo anywhere in frame.
Anton TNT said:
You don't need one it will generate automatically when installed software that matches your device and mcu.
Look for software on links that I pinned here in posts, or try find and install the correct one here :
https://yadi.sk/d/umCvHqCDzHccr
NOTE: if your device is not ALPS 5500 then you must follow posts for links that matcgh your device !
Click to expand...
Click to collapse
I found license.dat from 4pda and with fw you provided all my problems are solved. Thank you.
ashensii said:
I found license.dat from 4pda and with fw you provided all my problems are solved. Thank you.
Click to expand...
Click to collapse
Well glad I could help in some way.... Hit the thanks meter if helped...
hi guys sorry to jump in but I am not finding or getting any help. I think I to reflash my device but cant find a download anyware and NOT getting any help from seller,
please can anyone (HELP) me in finding this software or even an upgraded version
Kirinavi
Android: YT9216CH_AHD_00005_V004_HIFI
Android os: Android 9.1
XY AUTO: B6.2 (X2)
CAN Pro: BNR-OLD English high with-V2.20.9-connect
DDR: 2g FLASH: 32GB
cpu A7 1.3GHz x4
Amplifier AC7315 MOS bile duct 50W X 4
display 1024*768( 6 bits)
MCU: 3.5 (X2)
kernal 4.14.116 (gcc version 6.3.1 20170404 linaro GCC 6.3-2017.05 ) ) [email protected] #12
sheerness said:
hi guys sorry to jump in but I am not finding or getting any help. I think I to reflash my device but cant find a download anyware and NOT getting any help from seller,
please can anyone (HELP) me in finding this software or even an upgraded version
Kirinavi
Android: YT9216CH_AHD_00005_V004_HIFI
Android os: Android 9.1
XY AUTO: B6.2 (X2)
CAN Pro: BNR-OLD English high with-V2.20.9-connect
DDR: 2g FLASH: 32GB
cpu A7 1.3GHz x4
Amplifier AC7315 MOS bile duct 50W X 4
display 1024*768( 6 bits)
MCU: 3.5 (X2)
kernal 4.14.116 (gcc version 6.3.1 20170404 linaro GCC 6.3-2017.05 ) ) [email protected] #12
Click to expand...
Click to collapse
Hi, please, this is forum for ALPS 5000 8227L device only try to put your search for right device
I can help you out with this, can I get some info where this kirinavi is bought ? Ali Express?
And can I get screenshot of device settings (MCU, media, bluetooth, device model, real android version of device etc.) - go to infotainment or similar settings menu and put screenshots.
Anton TNT said:
Hi, please, this is forum for ALPS 5000 8227L device onlčy try to put your search for right device
I can help you out with this, can I get some info where this kirinavi is bought ? Ali Express?
And can I get screenshot of device settings (MCU, media, bluetooth, device model, real android version of device etc.) - go to infotainment or similar settings menu and put screenshots.
Click to expand...
Click to collapse
"THANK YOU SOOOO MUCH"
for getting back to me, i have tried for months to try and get some help with this and you are the only one that has got back to me!...
yes i did get the system from aliexpress but not getting help from them since they have had the money,
i think i have added the pics to this, if there is anymore info you are needing please let me know,
again thank you so much :angel:
Dear Team,
I have a trouble with my android car stereo.
By mistakenly I have uninstalled the app "CAN Setting" from the Android App Setting menu.
After that I am unable to see the "Factory Setting Menu".
I could enter the password for Factory Setting Menu, after pressing OK button the screen will get disappeared.
I have also tried installing the "CAN Setting" app by taking out the "PvCanset.apk" from one of the ROM images got from internet.
I have shared the device configuration here.
Android: UP_UI06_F27LJ_00009_V001_20200320
Android os: 8.1 UP:3.2 (8227L)
CAN Pro: 3.0(8227L)
MCU 3.1 (8227L)
cpu A7 1.3GHzx4
DDR: 4G (but actually only 2GB) Flash: 16G
display: 1024x600
Could you please help me to solve this issue?
Thank you in Advance!
Shijoy.J.G
Factory Setting Menu is not getting loaded in Android Car Stereo (!!! Solved !!!)
shijoyjg said:
Dear Team,
I have a trouble with my android car stereo.
By mistakenly I have uninstalled the app "CAN Setting" from the Android App Setting menu.
After that I am unable to see the "Factory Setting Menu".
I could enter the password for Factory Setting Menu, after pressing OK button the screen will get disappeared.
I have also tried installing the "CAN Setting" app by taking out the "PvCanset.apk" from one of the ROM images got from internet.
I have shared the device configuration here.
Android: UP_UI06_F27LJ_00009_V001_20200320
Android os: 8.1 UP:3.2 (8227L)
CAN Pro: 3.0(8227L)
MCU 3.1 (8227L)
cpu A7 1.3GHzx4
DDR: 4G (but actually only 2GB) Flash: 16G
display: 1024x600
Could you please help me to solve this issue?
Thank you in Advance!
Shijoy.J.G
Click to expand...
Click to collapse
Dear Team,
Finally the issue has been resolved with "Trial 3".
Trial 1:
Extracted the PvCanset application from the "system.new.dat" file in Firmware which got from the Internet. (PvCanset app is present at the location "system\vendor\operator\app")
It has .apk, .so and .odex files. Tried install the apk file directly.
The app got installed.
But the application did not get opened, since the .odex file did not get installed.
I have tried installing the .odex file as well, but it did not succeed.
Trial 2:
Reported the issue to the seller and requested him to share the latest Firmware.
Seller has shared the updated ota Firmware.
I have tried upgrading with the same.
The firmware has been installed successfully.
But the issue did not get resolved.
Trial 3:
The Factory Reset has been done through "Settings-->Backup & Reset-->Factory Data Reset".
This has erased all the data and installed the PvCanset application correctly.
Now the issue has been resolved.
Hope this information will help you.
Thank you in Advance!
Shijoy.J.G
shijoyjg said:
Factory Setting Menu is not getting loaded in Android Car Stereo (!!! Solved !!!)
Dear Team,
Finally the issue has been resolved with "Trial 3".
Trial 1:
Extracted the PvCanset application from the "system.new.dat" file in Firmware which got from the Internet. (PvCanset app is present at the location "system\vendor\operator\app")
It has .apk, .so and .odex files. Tried install the apk file directly.
The app got installed.
But the application did not get opened, since the .odex file did not get installed.
I have tried installing the .odex file as well, but it did not succeed.
Trial 2:
Reported the issue to the seller and requested him to share the latest Firmware.
Seller has shared the updated ota Firmware.
I have tried upgrading with the same.
The firmware has been installed successfully.
But the issue did not get resolved.
Trial 3:
The Factory Reset has been done through "Settings-->Backup & Reset-->Factory Data Reset".
This has erased all the data and installed the PvCanset application correctly.
Now the issue has been resolved.
Hope this information will help you.
Thank you in Advance!
Shijoy.J.G
Click to expand...
Click to collapse
Hi Shijoy,
I have problem with the CAN_settings apk too.
It has no option for GE - Trax vehicle.
Do your apk file contain GE - Trax option? (the one in the factory setting - protocol setting)
If yes, please share me the apk file to update my unit to connect to my car.
Your prompt reply would be appreciated.
Regards,
I. B. Adi P.
Ghostadi said:
Hi Shijoy,
I have problem with the CAN_settings apk too.
It has no option for GE - Trax vehicle.
Do your apk file contain GE - Trax option? (the one in the factory setting - protocol setting)
If yes, please share me the apk file to update my unit to connect to my car.
Your prompt reply would be appreciated.
Regards,
I. B. Adi P.
Click to expand...
Click to collapse
Hi Adi,
Very sorry for the late reply!
Unfortunately, in my CAN Settings apk also do not have option for GE - Trax vehicle.
Best Regards,
Shijoy.J.G
Hi! I have a similar issue with my Mitsubishi Outlander. After doing a Factory Reset through "Settings-->Backup & Reset-->Factory Data Reset" my car is not available in the CAN settings. Any idea how to help me? Could you please upload the CAN settings apk? Thank you in advance.