I uploaded TWRP, I installed the magisk from its level. An error popped up and after the reset the phone does not start anymore. It catches bootlop on "Your Device Cannot Be Checked for Corruption".
Neither Power + UP, Power + Down turn on TWRP.
I can't turn on fastboot to upload TWRP again. I can't turn off my phone.
EDTI: Managed to. Power + Down, but when used at the right time, they worked.
Related
Hi!
As the title says, TWRP is not working, when I flash it, fastboot says it's successful, so I turn off phone (hold power button), then I try to boot straight to recovery (hold volume up, volume down and power at the same time), phone vibrates, I let go of power but screen is pitch black, so I try again (I again flash TWRP), this time I hold power until Lenovo logo shows up, but It doesn't, screen is pitch black, so I boot system and turn off the phone, boot to recovery and stock shows up, so I know I can boot to recovery. Bootloader is unlocked and I have already flashed TWRP on this phone, I just returned to stock ROM so I lost it.
TWRP: https://forum.xda-developers.com/k4-note/development/recovery-twrp-3-0-2-0-touch-recovery-t3530374
I try to use TWRP 3.1.1, used that one before and it worked.
Edit:
I did the same thing and it decided to work, phone just went all r****d on me yesterday.
LS997 (September 2016 security patch), got to the end of root and couldn't reboot into TWRP recovery. The device is recognized in ADB while in fastboot but when I'm at the secure startup it's unrecognized, like USB debugging is disabled.
https://forum.xda-developers.com/v20/how-to/guide-root-twrp-lg-v20-using-dirtysanta-t3722278
If you've hit secure startup the phone has likely booted into regular Android far enough to replace twrp with stock recovery. Reboot into fastboot and reflash twrp (you can use the newest twrp if you want). Once done flashing unplug from PC and pull the battery. Reinsert the battery then boot into twrp via the factory reset/volume button method: hold volume down, press power until the screen turns on then (still holding vol - ) tap power repeatedly until a prompt to factory reset appears. Approving it twice boots twrp if it's installed, otherwise stock recovery will do the reset.
Once in twrp go to wipe, then format data (type yes to confirm), then go to reboot, then recovery. Once twrp restarts flash your choice of magisk/supersu.
Once one of those two is installed it makes it so twrp won't be replaced.
Phoenix591 said:
If you've hit secure startup the phone has likely booted into regular Android far enough to replace twrp with stock recovery. Reboot into fastboot and reflash twrp (you can use the newest twrp if you want). Once done flashing unplug from PC and pull the battery. Reinsert the battery then boot into twrp via the factory reset/volume button method: hold volume down, press power until the screen turns on then (still holding vol - ) tap power repeatedly until a prompt to factory reset appears. Approving it twice boots twrp if it's installed, otherwise stock recovery will do the reset.
Once in twrp go to wipe, then format data (type yes to confirm), then go to reboot, then recovery. Once twrp restarts flash your choice of magisk/supersu.
Once one of those two is installed it makes it so twrp won't be replaced.
Click to expand...
Click to collapse
Did this, got to the set-up screen (languages, accessibility) and an error ¨com.android.phone has stopped¨ spammed the screen. I tap ¨stop app¨ and the pop-up comes back immediately.
I tried to fix it by factory resetting (in the settings, NOT using the volume down/power button menu OR TWRP) and now I´m stuck in TWRP. Every time I try to reboot to System, it boots to TWRP now.
strapdad said:
Did this, got to the set-up screen (languages, accessibility) and an error ¨com.android.phone has stopped¨ spammed the screen. I tap ¨stop app¨ and the pop-up comes back immediately.
I tried to fix it by factory resetting (in the settings, NOT using the volume down/power button menu OR TWRP) and now I´m stuck in TWRP. Every time I try to reboot to System, it boots to TWRP now.
Click to expand...
Click to collapse
Power down, then boot to twrp using the volume buttons. Use the wipe menu there to do the reset.
Phoenix591 said:
Power down, then boot to twrp using the volume buttons. Use the wipe menu there to do the reset.
Click to expand...
Click to collapse
Wiped it, still get the com.android.phone errors.
Unfortunate, makes doing anything impossible with so many error popups.
strapdad said:
Wiped it, still get the com.android.phone errors.
Unfortunate, makes doing anything impossible with so many error popups.
Click to expand...
Click to collapse
Reflash your variant's official KDZ using [PARTITION DL] with patched LGUP leaving [aboot], [abootbak], [recovery], [recoverybak] partitions unchecked.
- Once the flash finishes & phone reboots, do a battery pull so phone doesn't fully boot (wiping recovery & encrypting data)
- Insert battery again
- While pressing volume down button - reinsert usb cable so it boots into fastboot mode.
- Follow dirtysanta guide for your variant from running step3.bat onwoards (which flashes TWRP back into your otherwise stock phone).
LS997, no official KDZ. Use VS995, but dump everything with LGUP (bar userdata) before hand
So I have installed 10.0.1 and it was a mess - wifi didn't work, music (from youtube or games) didn't work, I couldn't receive or make phone calls cause phone crashed + other smaller things. I've decided to remove this sh***y rom and install latest stable Android 9. So I entered TWRP, wiped cache, data system, etc. I have Installed 9.17 and rebooted - no luck. Phone simply boot to recovery (but not twrp anymore). I have installed twrp via fastboot and cmd but after that phone didn't boot to anything...
Right now when I start it by power button or power button + vol down it's getting stuck on *boot loader unlocekd** screen but if I press power + volume up I see error Qualcomm Crash Dump Mode...
Any ideas what to do?
Msm
That helped! Thanks
Hello,
i found my old zuk z1 and updated everything. TWRP to 3.2.1 and lineageos to last nightly. This was working. Then i tried a opengapps mini package for ARM. Since this, my phone can't start any more. With lineageos there was a reboot after 5 minutes to recovery and i tried to delete everything and flashed lineageos with different version, but still reboots after 5 minutes. So i tried an other image AospExtended-v7.2-ham-20200521-1100-UNOFFICIAL and now i have an endless boot screen without reboot and recovery. I can't reach it manually. I tried every Combination with Power Button, Vol up, vol down, both, and with home button. Until Vibration, 10 sek....nothing works, i can't reach recovery mode anymore
how could i recover my zuk1 ?
update, there was an error with vol down, so i can't go recovery with buttons. But you can reach it with adb and
Code:
adb reboot recovery
Recently I installed TWRP through odin and vbmeta with verity disabled, then flashing multidisabler inside TWRP, after that I could boot into system and everything was fine, then I flashed the custom kernel CruelKernel, I had done it a year ago on the same phone and everything worked perfectly so wouldn't doubt it this time. After I flashed it and rebooted, im stuck on the Samsung logo, I tried every key combination for both recovery and download mode (power button + volume up + bixby for recovery and volume down + bixby for download mode, with a USB connected to a PC). Neither worked, I tried several different timings and none worked, can't connect with ADB or odin either. Tried draining battery, but as soon as I plug it in it boots to logo without me doing anything, tried key combinations here too and didn't work.
Any suggestions?