I just replaced my old broken LCD screen for the mda and installed the new one. The screen works and so does the touch screen but there is no backlight and settings are on for backlight... Whats wrong??? Please help..
I haven't opened the MDA so I'm not sure what the cabling is like (to know if it is a separate cable that controls the backlight or not, if so then this might be inaccurate)...
Sounds to me like the LCD has a dead backlight. Was it purchased used or new? and where from? meaning was the dealer reputable. If so, contact the dealer and ask them for a replacement. As, at least on laptops and most (though not all) electronics, the backlight is integrated into the LCD housing and sold as a single unit. So a failure of the backlight, though replaceable, usually results in the replacement of the screen as a whole.
The LCD was purchased new and came in packaging and had the plastic still on touch screen. Purchased it online. The screen works fine its just the backlight. you might be right about the dead backlight I'll contact dealer and tell them. Thanks
MDA Backlight issue
I ran across a problem with the MDA, where I adjusted the Backlight settings. From there on the Backlight woulf not turn on unless I went to the setting control to adjust it. The fix: Go to backlight settings, set your brightness desired (maybe in the middle). Go to Battery power from the tabs that are currently listed. Make sure you have (Turn on Backlight when a button is pressed or the screen is tapped) Selected. Then press ok.
That should fix it if the issue you are experiencing is similar to mine.
i tried the settings and no good..Is there anything else I should try? Please help.
tried these settings and no good...is there anything else i can do please help..
Hi. I had changed the LCD to my HTC touch HD blackstone Italian TIM brand. I turn on the phone, display backlight turn on but the LCD is black. I know that the phone works because old display worked. (I had to broken old display trying to change the broken touch on the LCD......they use the glue to make phone....). Somebody could help me please? tnx
Hello,
today I tried to replace the front panel of my P8 Lite and every thing work with exception of the touch screen. In order to work I need to stay constantly touching the screen and when I "double tap" it works normally.
Any idea of what went wrong?
Appreciate all the help. Thanks
I have replaced my damaged screen and after that Always on display feature isn't working well...Now the touch when the screen is off isnt working and i cant change music from it...anybody can help?
Same problem. Because screen is fake amoled screen. Not original.
Note: I tried to translate it through Google translator kkkk good morning, so my Black shark 2 pro, my touch is stuck without being able to touch literally anything or even try to turn it off using Power and going to the option off/restart. it just restarts on Power -.. does anyone know how to fix this touch issue?
mine is the black shark 2 pro "CN/EN".
It's not broken or the screen is defective.