Related
hi every one !
i have issue on my op2 with frp,i wanna flash it but cant unlock bootloader because oem unlock on settings is checked.my question is have any idea about incheck oem unlock via adb or fastboot
thanks
deleco said:
hi every one !
i have issue on my op2 with frp,i wanna flash it but cant unlock bootloader because oem unlock on settings is checked.my question is have any idea about incheck oem unlock via adb or fastboot
thanks
Click to expand...
Click to collapse
Can't you just go into Settings > Developer Options and enable OEM unlocking?
Guide
Spannaa said:
Can't you just go into Settings > Developer Options and enable OEM unlocking?
Guide
Click to expand...
Click to collapse
i dont have access in normal mode
stuck in google account
deleco said:
i dont have access in normal mode
stuck in google account
Click to expand...
Click to collapse
Please return the phone to the person you took it from. Once a phone is locked there is nothing you can do about it
Posting the same question all over the site is unnecessary, and twice in this section. Its also against the site rules.
http://forum.xda-developers.com/oneplus-2/help/enable-oem-unlock-issue-t3297417
Thread closed.
Darth
Forum Moderator
My phone wont boot back up because i interrupted the download by holding down the power button during install...it just keeps flashing google !!!
Help only had for 1 hour !!
Don't panic, flash a factory image and everything will be fine again
Gorgtech said:
Don't panic, flash a factory image and everything will be fine again
Click to expand...
Click to collapse
how do i do that ?
please tell me you enabled adb debugging and oem unlock (in developer settings)
and why? why did you power down during the update?
I am not sure if I debugged anything ....all I did was unlock the system Ui or something like that by tapping on something 7 times to unlock some hidden features !
I was paying attention to the phone and had the buttons held down while holding
On the screen when I try to recover in the bottom left it says device is locked along with a bunch of stuff and then the last line says connect USB CABLE .
akoda said:
I am not sure if I debugged anything ....all I did was unlock the system Ui or something like that by tapping on something 7 times to unlock some hidden features !
I was paying attention to the phone and had the buttons held down while holding
Click to expand...
Click to collapse
if you didn't alter anything within those "hidden features" you're almost certainly out of luck.
you need to have enabled "adb debugging" to likely get yourself out of this jam... plus you didnt unlock your device
try some of the things listed in this thread: http://forum.xda-developers.com/nexus-6p/help/mess-locked-bootloader-os-t3316463
if they dont work, im sorry to day, you pooched your device. will need repairs.
There's probably nothing you can do. Your bootloader is locked so you can't use fastboot to flash anything. If the stock recovery supports adb sideload you could try that, otherwise you're fresh out of luck and need it to be repaired.
WOW ...i cant believe this .....what should i say when i return it ?
You could say it powered off during the update.
akoda said:
WOW ...i cant believe this .....what should i say when i return it ?
Click to expand...
Click to collapse
well.. if nothing else, a hard lesson to NOT touch the phone at all when it's updating.
really sucks, and clearly just a mistake. hopefully they take pity on you
dratsablive said:
You could say it powered off during the update.
Click to expand...
Click to collapse
thanks ...i appreciate all you guys help !!!
Hi guys,i was looking for guide how to unlock Axon 7 with latest update 1.2.0B05 but can't find anything. Can someone please help? I want to flash resurrection remix rom and not to brick phone...or is there better roms?
I cannot believe you're asking this question.
YOU HAVEN'T READ ANYTHING.
This board is full with uncountable guides.
https://forum.xda-developers.com/showthread.php?t=3573108
Not working....error: Length cannot be less than zero. Parameter name: length
salle25 said:
Not working....error: Length cannot be less than zero. Parameter name: length
Click to expand...
Click to collapse
Really, the last thing this forum needs is people unable to find guides on their own...
Ask @bkores about the error
WTF is wrong with you ppl?? I came to ask for help and you told me i'm retarded and stupid in nice way! If you don't wan't to help anyone then don't post reply or help and don't QQ about that! Thanx a lot!
salle25 said:
WTF is wrong with you ppl?? I came to ask for help and you told me i'm retarded and stupid in nice way! If you don't wan't to help anyone then don't post reply or help and don't QQ about that! Thanx a lot!
Click to expand...
Click to collapse
I'm sry but there's nobody here who will tell you're stupid,
People here are willing to help, but if you are too lazy to search for the guides (yes more then one is available) people will tell you that you are lazy.
Now I link a working guide for you
https://forum.xda-developers.com/axon-7/how-to/guide-install-twrp-unlock-bl-flash-t3517379
If you want it easier, search for the toolkit, it will make the most work for you.
Nope....not working. axon7tool.exe keeps crashing: "This application has requested the Runtime to terminate it in an unusual way.
Please contact the application's support team for more information."
Toolkit is useless too,MiFlash doesn't see phone when in EDL mode,reinstaled every possible driver i found and not even Zadig helped. I had custom roms on every singe phone i had,but this one is pain in the ...
Got it sorted....renaming to .bin was problem,thanx
question
me too
salle25 said:
Got it sorted....renaming to .bin was problem,thanx
Click to expand...
Click to collapse
Yes it's a bit harder to unlock and flash, good you managed that, I forgot to tell you that there are two toolkits win32 and win64.
Help cant repair my Axon 7 G latest B05
coremania said:
Yes it's a bit harder to unlock and flash, good you managed that, I forgot to tell you that there are two toolkits win32 and win64.
Click to expand...
Click to collapse
I try to use both method and still withaut succes also have message before run my phone "Your device software can't be checked for corruption, Please lock the bootloader"
I try almost evrything and nothing.
Bizon86 said:
I try to use both method and still withaut succes also have message before run my phone "Your device software can't be checked for corruption, Please lock the bootloader"
I try almost evrything and nothing.
Click to expand...
Click to collapse
So what don't you understand on this message? It tells you that your bootloader is already unlocked [emoji779] [emoji779]
marcus.linkenbach said:
So what don't you understand on this message? It tells you that your bootloader is already unlocked [emoji779] [emoji779]
Click to expand...
Click to collapse
No is not unlocked Axontooolkit says something oposit. I try both guides from this topic and:
- twrp dosent instal
- cant allow oem unllock
- when use UNLOCK BOOTLOADER Miflash dosent see my devices
Bizon86 said:
I try to use both method and still withaut succes also have message before run my phone "Your device software can't be checked for corruption, Please lock the bootloader"
I try almost evrything and nothing.
Click to expand...
Click to collapse
Your bootloader is unlocked, you only got to managed the rest, read this thread here, you will see it's familiar to your situation, read to the end.
https://forum.xda-developers.com/axon-7/help/to-date-guide-rooting-a2017g-b04-t3666808
I try this and still. nothing
Bizon86 said:
I try this and still. nothing
Click to expand...
Click to collapse
This is a bit thin.
A bit more details, you don't manage to go to edl mode ?
Did you try zadig to to get the right drivers working ?
What do see in device manager ?
Can you boot to stock recovery?
Did you tried to start from scratch with the guide, not the toolkit ?
No detail, no help
Edit: if you use only the toolkit, may ask in the toolkit thread for help ???
coremania said:
This is a bit thin.
A bit more details, you don't manage to go to edl mode ?
Did you try zadig to to get the right drivers working ?
What do see in device manager ?
Can you boot to stock recovery?
Did you tried to start from scratch with the guide, not the toolkit ?
No detail, no help
Edit: if you use only the toolkit, may ask in the toolkit thread for help ???
Click to expand...
Click to collapse
Zadig works for axon7tool only, MiFlash uses COM while axon7tool uses usb protocol
- The edl is dont working because phone go blank after use command and computer dosent see it.
- i try zading and try another driver effect is the same.
- in device menager i see android device but only when smartfon is running
- i start from the scratch the effect is the same
- i cant turn allow oem
the problem is with phone if i use adb reboot computer dont see phone
Bizon86 said:
Then what i must do any idea?
Click to expand...
Click to collapse
First of all, understand what you just did. If you don't explain it in an understandable way, we won't get any of it...
So:
-You unlocked the bootloader.
-axon7toolkit failed somewhere, and you didn't tell us exactly where
-you didn't try to use any guide to retake from where it ended up failing
-you didn't try to enter any mode
So just try to get to recovery or fastboot, using the 5 sec screen. After that we'll see
Bizon86 said:
- The edl is dont working because phone go blank after use command and computer dosent see it.
- i try zading and try another driver effect is the same.
- in device menager i see android device but only when smartfon is running
- i start from the scratch the effect is the same
- i cant turn allow oem
the problem is with phone if i use adb reboot computer dont see phone
Click to expand...
Click to collapse
If you go to edl, by adb command or by pressing both volume buttons while connecting usb the screen goes blank, that's ok, it has to be this way.
Why you want to turn on allow oem, you are already unlocked.
Your issue seems to be the driver, I guess.
Edit: try this maybe, from the toolkit FAQ
The toolkit says my device is connected through ADB but adb commands don't work?
Your device may be unauthorized. Unlock your device, open a cmd window, type in "adb devices" and then accept the "Allow USB debugging" prompt on your phone. Make sure to check the "Always allow from this computer" box as well. If you don't get the prompt, try retoggling USB debugging, replugging your device in, and revoking all USB debugging authorizations in developer options.
Hello, I've bought the HTC U Ultra for my birthday at a very good price (250€) and I'm very satisfied about this phone!
Only, it's been 3 months since I try to root without any success. I can not find the "fastboot" mode in the bootloader and I do not know how.
Yet I followed all the tutorials to the letter (French expression I do not know if you go to understand ... x)) but I have never reached that point. I have the ADBs and all the other files needed.
Also, I made all the updates at the first launch of the phone. Is that why it's blocked?
Thank you in advance.
PS: I also unlocked the bootloader in the development options.
PS n°2: I post here because the French forums are desperate desert for this phone.
Hold both volume down + power together for around 10 seconds. Your phone will vibrate after that. You will then enter download mode, which is actually fastboot.
bc Yume said:
Hold both volume down + power together for around 10 seconds. Your phone will vibrate after that. You will then enter download mode, which is actually fastboot.
Click to expand...
Click to collapse
Ok, but when I want to unlock the bootloader using htcdev, I have < waiting for device > when i enter fastboot oem get_identifier_token.
SofianeLasri said:
Ok, but when I want to unlock the bootloader using htcdev, I have < waiting for device > when i enter fastboot oem get_identifier_token.
Click to expand...
Click to collapse
The computer is unable to recognise your phone. Maybe another port.
bc Yume said:
The computer is unable to recognise your phone. Maybe another port.
Click to expand...
Click to collapse
my device is recognize when it's start, but when it reboot to bootloader, abd / fastboot lost the connection. :/
I've tried with all of my ports.
SofianeLasri said:
my device is recognize when it's start, but when it reboot to bootloader, abd / fastboot lost the connection. :/
I've tried with all of my ports.
Click to expand...
Click to collapse
Are you sure you have USB Debugging on and you are using ADB driver from Google, not the one comes from HTC Sync?
bc Yume said:
Are you sure you have USB Debugging on and you are using ADB driver from Google, not the one comes from HTC Sync?
Click to expand...
Click to collapse
I use minimal adb 1.4.2 and i don't installed htc sync.
I use adb command line directly from Android Developers and have absolutely no problem. Maybe uninstall minimal adb and try that one. I can't help you with something I am not familiar with.
bc Yume said:
I use adb command line directly from Android Developers and have absolutely no problem. Maybe uninstall minimal adb and try that one. I can't help you with something I am not familiar with.
Click to expand...
Click to collapse
Yes but I must to download a lot of GB to user these abd. :/
I've just install htc sync, I tell you more if it work.
UPDATE : Oh it work! x) I never thought it would work! I thought htc sync was a software like those samsull that block the phone.
cool but i've now s-on and a i can"t install twrp with this. x)
SofianeLasri said:
cool but i've now s-on and a i can"t install twrp with this. x)
Click to expand...
Click to collapse
You can install TWRP as long as your bootloader is unlocked, regardless of the status of S-ON or S-OFF
SofianeLasri said:
cool but i've now s-on and a i can"t install twrp with this. x)
Click to expand...
Click to collapse
double check "Allow USB debugging" for the computer. From Developers "Revoke USB debugging Auth" . Unplug & plug back USB cable should come up with dialog box for auth. You may (not sure) this from cmd: adb reboot fastboot which could come up with error msg: "error: device unauthorized. This adbd's $ADB_VENDOR_KEYS is not set; try 'adb kill-server' if that seems wrong. Otherwise check for a confirmation dialog on your device."
You cant find fastboot mode because it is now called download mode...
Hi
sorry if post is duplicated , i search but not found on this topic
When i connect my mobile to pc and then run command to go to bootloader ,
it shows Daemon not running. Starting it now on port 5037
then goes to bootloader
in bootloader no command work there , means only adb reboot bootloader works
even fastboot devices shows nothing
please advise me what i have to do
Sorry for my bad English
Thanks
if from your pc you type:
adb reboot bootloader
does it go to the bootloader?
If so, while the bootloader is displayed, from the pc if you type:
fastboot devices
Are you saying it responds with nothing?
minhas4all said:
Hi
sorry if post is duplicated , i search but not found on this topic
When i connect my mobile to pc and then run command to go to bootloader ,
it shows Daemon not running. Starting it now on port 5037
then goes to bootloader
in bootloader no command work there , means only adb reboot bootloader works
even fastboot devices shows nothing
please advise me what i have to do
Sorry for my bad English
Thanks
Click to expand...
Click to collapse
So I'm confused.
If I type "adb reboot bootloader" with my phone connected; it boots into fast boot mode and will accept fastboot commands.
it shows the "Fastboot" screen with the option to start the device if the power buttoned is pressed.
What are you trying to do?
Are you saying you don't get the screen?
Zargone said:
if from your pc you type:
adb reboot bootloader
does it go to the bootloader?
If so, while the bootloader is displayed, from the pc if you type:
fastboot devices
Are you saying it responds with nothing?
Click to expand...
Click to collapse
Thanks
when i enter fastboot devices
it does nothing just go to next prompt
nothing happen
i want to unlock bootloader and root
Thanks once again
tech_head said:
So I'm confused.
If I type "adb reboot bootloader" with my phone connected; it boots into fast boot mode and will accept fastboot commands.
it shows the "Fastboot" screen with the option to start the device if the power buttoned is pressed.
What are you trying to do?
Are you saying you don't get the screen?
Click to expand...
Click to collapse
Thanks
with me when I type "adb reboot bootloader" with my phone connected; it boots into fast boot mode but in fastboot no command works
i want to unlock bootloader and root
thanks
Did you remember to go into the developer options and enable USB Debugging and OEM Unlock?
jhs39 said:
Did you remember to go into the developer options and enable USB Debugging and OEM Unlock?
Click to expand...
Click to collapse
That was my next question.
jhs39 said:
Did you remember to go into the developer options and enable USB Debugging and OEM Unlock?
Click to expand...
Click to collapse
Yes
tech_head said:
That was my next question.
Click to expand...
Click to collapse
Yes
I root many phones
its easy
even i try other cables and 3 different laptops and pc
and the result was same
minhas4all said:
Yes
I root many phones
its easy
even i try other cables and 3 different laptops and pc
and the result was same
Click to expand...
Click to collapse
What drivers are you using.
I presume you are on a Windows laptop?
yes on windows 10
Sent from my PH-1 using XDA Free mobile app
Sounds like you're using an older fastboot, so you'll need to do fastboot -i 0x2e17 <whatever_command>
Or you can get the latest platform tools from https://developer.android.com/studio/releases/platform-tools#downloads
Did you install the essential phone drivers?
not sure about version but download some days back from links provided.. any ways thanks download from ur link then let u know
thanks
Sent from my PH-1 using XDA Free mobile app
ziddey said:
Sounds like you're using an older fastboot, so you'll need to do fastboot -i 0x2e17 <whatever_command>
Or you can get the latest platform tools from https://developer.android.com/studio/releases/platform-tools#downloads
Click to expand...
Click to collapse
not sure about version but download some days back from links provided.. any ways thanks download from ur link then let u know
thanks
crixley said:
Did you install the essential phone drivers?
Click to expand...
Click to collapse
Thinks so but can u provide me the links? thanks