Database Users

[Q] Problem when flashing with the latest official Rev12

Hi,
I have a phone with the last Acer official ROM and I would like to flash my phone with a custom ROM Rev12, I have already downloaded.
The problem is that the progression of flash remains stuck at 0% and it results in an error message telling me basically that my phone is not connected when it is recognized as ActiveSync.
What should I do?
French
Bonjour,
J'ai un téléphone portant la dernière ROM officielle du site Acer et je voudrai passer à une Custom ROM Rev12, que j'ai déjà téléchargé.
Le problème est que la progression du flash reste collé à 0% et ça se solde par une message d'erreur me disant en gros que mon téléphone n'est pas connecté alors qu'il est reconnu sous ActiveSynch. Que dois-je faire ?
Cordialement

Hi Xtombtz,
It's an english speaking forum, man. ;-)
I don't think that there won't be a lot of people that will understand what you mean.
If every user write in his own language, I think it will be a little bit harder.
You can use google translate at least.
PS: I've translate your request/question.
For your problem,
What did you do exactly before flashing your phone ?
Did you try to download again this Custom Rom. Maybe the one you downloaded is corrupt.Are you sure that it the right one for your phone.
starts the phone by pressing simultaneously camera and power buttons.
the screen stays black but the red LED should light up or flash , I think.
then plug the USB and retry flashing
but in this in condition, you must use the modified acer_euu.exe specially for custom Rom.
Hope it helps

Read the Flashing Guide.

Sorry to speak french, i promise to will be a warrior and speak english without google translate
Thanks for the guide but nothing new on it.
My question is : can i downdrade my phone with a custom ROM.
My phone -> V.3 official
The custom ROM i want -> V.2

Yes - but i don´t know if you are going to find a custom ROM version 2.0.
I don´t know if the Ocman´s Sense ROM is version 2.0 - you can ask him.

If i can downgrade i'm very surprised the flash doesn't work

I'm not sure but I think you have error message because the phone is not on maintenance mode, to put the phone on maintenance mode,
Keep press the camera button and volume down button.
Press the reset button with stylus (always holding the 2 buttons) Unpress reset button. Phone screen is black
And now you can release the 2 buttons.
The orange led twinkle in maintenance mode, now you can relaunch the flash utility.
Have fun
In Français
Je ne suis pas sur de la réponse, mais tu as ce message d'erreur car le téléphone n'est pas en mode maintenance (requis pour flasher, mais non indiqué dans l'utilitaire de flashage).
Pour passer le téléphone en mode maintenance :
1. Appuie simultanement sur le bouton de l'appareil photo (completement) et le bouton pour baisser le volume. (Garde les appuyés)
2. Appuie sur le bouton de reset avec ton stylet (tout en maintenant les 2 boutons précédents), le téléphone s'éteint. tu relaches le bouton de reset
3. maintenant tu peux relacher les 2 boutons, l'écran ne s'allume pas mais la led Orange clignotte, tu es maintenant en mode maintenance.
Tu peux donc relancer ton utilitaire de flashage.
Bon courage
@ woaloo : for some people, camera button is sufficiant, but for other, it is the camera button and volume down (and not power as you said). but maybe I say craps, but works for me.

You are so kind and him so hapy to have the solution that he didn't even thank you lol
Anyway, my rom is based on 3.00C FR_SFR bootloader
Hope you manage to flash the rom!

Ok, the problem was that the phone may be in "recovery mode" to flash it. Thankx

[Q] kindle fire brick, the logo is flashing, and nothing else

Hello From France
My wife bought me a kindle for xmas.
as i'm outside the US, i tried to root it.
it worked, but after i had a brick i couldn't solve with the tools i found in this forum (fire utility v.9).
My kindle is 6.2.1
it is still recognised by adb
but impossible to acess the system or to boot it.
the errors are :
"kindle fire adb could not access the package manager, is the system running ?"
impossible to boot in recovery mode or to do anything with it.....
if someone has an idear, i would appreciate
could it be possible to reformat it or do something ???
thanks
Jean-Luc

http://forum.xda-developers.com/showpost.php?p=20729347&postcount=5

hello thanks for your help
i think i made a mistake with the permissions of the APP repertory.
impossible to access the system, to change boot method, to use fastboot or kindle utility...
here is my problem (i think...) :
the permission with my APP repertory is : drw-r--r-- root root
how can i fix it ??
is there a way to format the kindle ?
thanks !
jean luc

lucien12 said:
hello thanks for your help
i think i made a mistake with the permissions of the APP repertory.
impossible to access the system, to change boot method, to use fastboot or kindle utility...
here is my problem (i think...) :
the permission with my APP repertory is : drw-r--r-- root root
how can i fix it ??
is there a way to format the kindle ?
thanks !
jean luc
Click to expand...
Click to collapse
You and so many others seem to be having the same problem, and I feel for you all I did a little digging and found this hopefully it helps you...!
http://www.jayceooi.com/2011/12/24/how-to-solve-boot-loop-issue-on-kindle-fire-twrp-2-0/
Hit that thanks button

thanks for your help
but i'm not in TWRP Recovery mode
and when i try to type "idme bootmode 4000"
it says : invalid permission
if i try to boot : "permission denied"
if i try to reboot : "operation not permitted"
i really don't know what to do, i've tested all i found in the forum and nothing !!!!
please if you have an idear, help me
if you kinow how to format kindle, let me know
thanks to all
jluc

Salut Jean-Luc,
Je suis quebecois et je suis pris avec un peu le meme probleme que toi! Si tu es dans le meme cas que moi, si tu branche ton kindle sur twrp tu as adb online et fastboot offline?
Bref un membre de l'equipe irc (ceux qui on fait twrp) ma dit qu'a ce moment tu n'as pas grand choix que sois te le faire echanger, ou te fabriquer un factory cable.
Moi j'opte pour me fabriquer un cable car je suis bon pour faire de la micro soudure.
Ce cable enclenche le fastboot directement dans ton kindle ce qui va te permettre de le flasher par apres.
Bref, j'en fait un ce soir je te laisse mon email si tu veux que je te tienne au courant.
gagab12•yahoo.ca

un grand merci pour l'info
thanks for the information
mais je ne suis pas doué pour l'electronique...
aussi si tu fais un cable, que ça marche, dis moi si je peux te l'acheter (avec paypal c'est facile)...maintenant faudrait etre sur que ça marche.
tiens moi au courant, moi c'est [email protected]
merci d'avance et a+
excuse me for writing in french !
jluc

[HELP] Bricked Redmi Note TD-SCDMA 1.7GHz 2GB RAM

I have in hands the enhanced TD-SCDMA version intended for China Mobile (modification 2013122) of Redmi Note, the one with MT6592 SoC 1.7GHz & 2GB of RAM (see the picture attached). But the device is bricked up to the preloader (bootloader), i.e. do not power on.
If anybody has that one, I'll be very thankful to help me while make the Flash Tool ready backup with MTK Droid Tools from his working phone.
Thanks for your support!

Do you have custom recovery?

I have a Xiaomi redmi note
I have a similar issue only after I installed a custom rom still stuck don't know what to do
I do have custom recovery though where it says my internal memory is 0mb
Twrp v2.8.1.0

Sorry, I forgot to post update here. The device appeared to be fake / nonoriginal one. Tried some dumps from clones, that I found on russian forum and finally succeeded to unbrick it. However the NVRAM was damaged, and my tries to recover it were unsuccessful. I gave up finally.

I have this problem.
How to solve this problem?

dailor said:
Désolé, j'ai oublié de poster la mise à jour ici. L'appareil semblait être un faux / non original. J'ai essayé quelques décharges de clones, que j'ai trouvées sur le forum russe et j'ai finalement réussi à le débloquer. Cependant, la NVRAM a été endommagée et mes tentatives de récupération ont échoué. J'ai finalement abandonné.
Click to expand...
Click to collapse
J'ai le même problème.
Comment as-tu fais? j'ai vraiment besoin de ce fichier s'il vous plait.

Samsung Galaxy Note 3 Sm-n900w8 (Hard-Bricked)

Bonjour je possèdent un Samsung Galaxy note 3 sm-n900w8 , le problème est que la partition recovery a
été démonter accidentellement avec le programme Roehost Drive-Expert exécuter depuis le système Android
de l'appareil en question avec les droit d'administration (Root) . Résultat maintenant le téléphone ne fait
plus rien aucune image aucun voyant lumineux aucun son et ce retrouve donc coincer en mode urgence
(Emmerency) , donc détecter reconnu et installer sur Windows en tant que Qualcom HS-USB QDLoader 9008 .
Étant connecter reconnu et installer comme Qualcom HS-USB QDLoader 9008 ont peut distinguer un son
provenant de la machine équiper de Windows indiquant que le périphérique ce connecté déconnecter connecté
et cela a répétition.
(Le cable USB a été vérifier et un autre tester ainsi que le port USB de la machine équiper de Windows
donc es-ce normal je ne sais pas et aucune détection MMC ou EMMC dans le gestionnaire de périphérique de Windows).
Après avoir rechercher sur Google j'en suis venue a la conclusion qu'il y avais la possibilitée de créer
une image de débriquage sur carte micro SD de même capacitée que l'appareil de l’insérer dans dans le
sm-n900w8 et d'amorcer une reprogrammation de l'appareil a partir de celle-ci. J'ai trouver cette image de
reprogrammation après recherche sur Google pour mon dispositif mais n'est pas en mesure de réaliser encore
l’expérience puisque je n'ai pas de carte micro SD disposant de 32gb d'espace libre. La carte SD est acheter
et devrais arriver sous peux après en avoir passer la commande.j'ai quand meme durant ce temps expertiser
l'image de débriquage en question j'ai pue en tirer avec le programme Qualcomm Premium Tools beaucoup
d'information sur la table de partition de celle-ci ainsi que ces fichier nécessaire , j'ai comparer la
table de partition a celle de n900w8.Pit et cela ne concorde pas es-ce normal je ne sais pas.
Comme autre possibilitée il y a QFil et de nombreux autre programme qui permettent la reprogrammation EMMC
Qualcomm. Cela nécessite un Firehose (MsM8974aa.mbn , prog_emmc_firehose_8974.mbn , MPRG897.mbn , msm8974aa.hex)
selon ce que l'ont veux réaliser comme reprogrammation , moi je ne sais pas exactement lequel me sera nécessaire
puisque je ne détecte aucune EMMC dans les gestionnaire de périphérique donc a mon avis (MsM897.mpn ,
prog_emmc_firehose_8974.mbn) , ensuite il faut également (partition.Xml) aussi appelé (rawprogram.Xml) . Dans
ce cas ici j'ai réaliser quelque fichier XML baser sur certain modèle trouver sur internet qui étais dédier a
d'autre appareil donc je ne suis pas certain de mon fichier (partition.Xml) et pour finir il me faut (patch0.Xml)
Je suis donc a la recherche de ces fameux XML et Firehose toute aide sera apprécier a ca juste valeur.

Please keep in mind we are a "english only" forum.
Always try to translate your posts as best as possible, use google tranlate for example.
You can post in your native language but make sure to post translation with it.
4. Use the English language.
We understand that with all the different nationalities, not everyone speaks English well, but please try. If you're really unable to post in English, use an online translator. You're free to include your original message in your own language, below the English translation. (This rule covers your posts, profile entries and signature).
Your post:
Hello I own a Samsung Galaxy note 3 sm-n900w8, the problem is that the partition recovery has
been disassemble accidentally with the program Roehost Drive-Expert run from the Android system
of the device in question with the right of administration (Root). Result now the phone does not
nothing more no picture no light no sound and so it finds stuck in emergency mode
(Emmerency), so detect recognized and install on Windows as Qualcom HS-USB QDLoader 9008.
Being connect recognized and install as Qualcom HS-USB QDLoader 9008 have can distinguish a sound
from the machine equip with Windows indicating that the device that connected connected disconnect connected
and this has repetition.
(The USB cable was checked and another test as well as the USB port of the machine equip of Windows
so is it normal I do not know and no detection MMC or EMMC in the Windows device manager).
After searching on Google I came to the conclusion that there was the possibility to create
a debugging image on a micro SD card of the same capacity as the device to insert it into the
sm-n900w8 and initiate a reprogramming of the device from it. I find this picture of
reprogramming after searching on Google for my device but is not able to achieve yet
experience since I do not have a micro SD card with 32gb of free space. SD card is buy
and should arrive under can after placing the order.I still during this time appraise
the debugging picture in question I stumble with the Qualcomm Premium Tools program a lot
information on the partition table of it as well as these necessary file, I compare the
partition table has that of n900w8.Pit and this does not match it's normal I do not know.
As another possibility there is QFil and many other programs that allow EMMC reprogramming
Qualcomm. This requires a Firehose (MsM8974aa.mbn, prog_emmc_firehose_8974.mbn, MPRG897.mbn, msm8974aa.hex)
depending on what I want to achieve as reprogramming, I do not know exactly which one I will need
since I do not detect any EMMC in the device manager so in my opinion (MsM897.mpn,
prog_emmc_firehose_8974.mbn), then it is also necessary (partition.Xml) also called (rawprogram.Xml). In
this case here I realize some XML file based on some model find on the internet that was dedicated to
other device so I'm not sure of my file (partition.Xml) and finally I need (patch0.Xml)
So I'm looking for these famous XML and Firehose any help will be appreciated at fair value.

Meizu M3 Note BOOTLOOP problem

bonjour l'équipe XDA, après avoir longtemps cherché sur le net des solutions pour mon meisu m3 note, j'ai enfin trouvé un forum de développer et avec conviction j'ose espérer que j'aurai peut-être une solution au problème. démarrage continu rencontré par mon meisu, d'origine chinoise, j'ai oublié mon mot de passe et j'ai vu que le meisu m3 note use un chipset MTK du coup après avoir essayé dans wine et sans succès de supprimer le mot de passe j'ai utilisé un logiciel qui s'appelle MTK ALL in one et après que le système téléphonique refuse de démarrer, j'ai réussi à le mettre en mode balai avec le MCT et j'ai utilisé sp flashtool par la suite mais comme c 'est un fichier de mise à jour je ne trouve pas les fichiers scarter à lancer, après avoir essayé d'
Mod translation: Hello team XDA, after having long sought on the net of solutions for my Meisu M3 Note, I finally found a forum to develop and with conviction I hope that I may have a solution to the problem. Continuous start -up encountered by my Meisu, of Chinese origin, I forgot my password and I saw that the Meisu M3 Note uses an MTK chipset after trying in Wine and without success to delete the password I used software called MTK all in one and after the telephone system refuses to start, I managed to put it in broom mode with the MCT and I used SP Flashtool later but as C 'is an update file I cannot find the Scartter to launch files, after trying to

SYSTEME said:
Mod translation: Hello team XDA
Click to expand...
Click to collapse
Greetings, and welcome to XDA. As a friendly reminder, we ask all members to please post in English as stipulated by XDA Rule #4:
Spoiler: XDA Rule #4
4. Use the English language.
We understand that with all the different nationalities, not everyone speaks English well, but please try. If you're really unable to post in English, use an online translator. You're free to include your original message in your own language, below the English translation. (This rule covers your posts, profile entries and signature). You could try :- https://translate.google.com/ or https://www.babelfish.com/ or use one of your choice.
Thank you for your cooperation, and have a pleasant day.
-Regards: Badger50

Thank YOU