Can anyone know the procedure for getting download mode in one ui 3.0 beta 3 installed device
It changed with One UI 3
Volume up+down and usb... without cable I don't know. (Version 2 from below)
From Sammobile.com:
Reboot your phone in Download / Odin mode (make sure your device is off) with the following button combo: POWER + VOLUME DOWN + BIXBY
Other options in case first option did not work or isn't possible.
Option 2 VOLUME DOWN + VOLUME UP then USB cable
Option 3 POWER + VOLUME DOWN + VOLUME UP
Option 4 POWER + VOLUME DOWN + HOME BUTTON
Option 5 (Note9) USB cable + VOLUME DOWN + BIXBY
Option 6 (Note10) POWER + VOLUME UP
As I know you should press volume down + Bixby while connecting to the computer.
yeah it worked .. thank you so much
Related
Here are the differents buttons combinations for Acer Liquid :
Hard-Reset
Code:
Volume up / volume down + power button
FastBoot / BootLoader
Code:
1. Remove battery and replace battery.
2. plug in PC-connected USB cable
3. Camera button + "<" then Power.
Recovery
Code:
1. camera button + Volume down + Power button --> phone vibrates shortly 2-3 times
2. press < + camera button + power button
Inspired by Paul's @ modaco thread.
Hi,
Are these limited to Liquid, or do they work on other Acer devices? For example: Acer Stream?
Thanks
How to get Recevory Menu (pre boot menu) to delete data and Cache in Lenovo Phab 2 plus ?
I have tried the following key combinations but no progress,
1. Power key+ Volume Up and hen let go of Power key when you see the LENOVO logo on the screen - NO MENU
2.Power key+ Volume UP +Volume Down - NO MENU
3. Power key + Volume Down - RESET MENU (Chinesese language)
I've got answer:
Turn off the phone
Press and hold Power key+ Volume UP +Volume Down
after 3-5 seconds release Power key
and when recovery appears release Volume UP+Volume Down
petrmatula said:
I've got answer:
Turn off the phone
Press and hold Power key+ Volume UP +Volume Down
after 3-5 seconds release Power key
and when recovery appears release Volume UP+Volume Down
Click to expand...
Click to collapse
CANT SUCCESS...................................
Did as you told but not success
Try this
Turn off the phone
Wait about 15 seconds
Press and hold Power key+ Volume UP +Volume Down
nearly immediately release Power key
and when recovery appears release Volume UP+Volume Down
Recovery:
1. Power OFF
2. Press and hold VOLUME + and VOLUME -
3. Connect the USB cable (from the charger or PC)
4. After launching the recovery release the buttons and disconnect the cable. On the screen there will be the inscription "no command"
5. Press and hold POWER and one press VOLUME +
6. The android and "no commands" icon will disappear, and after a couple of seconds the standard recovery menu will be displayed
7. For navigation, use the volume buttons, to select - power
How to get into CWM mode, i forgot my devices password. :crying:
Luckily i once got able to inflate the memory and crashed the lockscreen app i had made it to the homescreen and enabled usb debugging ..Then i entered CWM interface ONCE! so i have cwm :laugh:
but nowi cant go into CWM mode .
i tried :
Home + Vol Down + Power
Home + Vol Down + vol Up + Power
Vol Down + Power
Vol Down + Vol Up + Power
SOLVED
sbnumara said:
How to get into CWM mode, i forgot my devices password. :crying:
Luckily i once got able to inflate the memory and crashed the lockscreen app i had made it to the homescreen and enabled usb debugging ..Then i entered CWM interface ONCE! so i have cwm :laugh:
but nowi cant go into CWM mode .
i tried :
Home + Vol Down + Power
Home + Vol Down + vol Up + Power
Vol Down + Power
Vol Down + Vol Up + Power
Click to expand...
Click to collapse
EDİT: i ended up unlocking the pattern lock after trying to guess my password for like a million times
Has anyone managed to boot into magisk mode on one ui 3? Power + bixby + vol up doesn't seem to be working anymore.. I also tried with the USB method but still no luck..
Recovery Mode UI 3.0
1. Turn off the device,
2. Connect the phone with a USB cable to the computer,
3. We wait until the screen showing the start of charging and the percentage of the battery appears,
4. Press the Volume + button and then the power button and hold both buttons until the device turns on -For older devices, such as Galaxy S10, it is required to hold the Volume +, Bixby and power buttons
grzegorz354 said:
Recovery Mode UI 3.0
1. Turn off the device,
2. Connect the phone with a USB cable to the computer,
3. We wait until the screen showing the start of charging and the percentage of the battery appears,
4. Press the Volume + button and then the power button and hold both buttons until the device turns on -For older devices, such as Galaxy S10, it is required to hold the Volume +, Bixby and power buttons
Click to expand...
Click to collapse
I can enter recovery mode just fine, the problem is that I'm not being able to boot into root (magisk) mode anymore after the update. Vol up + bixby + power (and USB) is only taking me to recovery mode now.
So far TWRP doesn't support android 11. Maybe the next version will support it.
I'm in the exact situation. I think nobody understood the question. He wants to boot into MAGISK MODE (Root) which some time ago it was made by pressing vol + + bixby a couple of seconds then releasing both buttons at the same time.
Now with UI3 we are left with recovery using USB cable or normal mode but no MAGISK.
I might have mess up my S10+. I have been trying bootup to recoverey mode without success -
a) Vol. up, Bixby & power buttons - doesn't work
b) Vol.up, Bixby & power buttons and connect to USB headphone - doesn't work
c) Vol.up, Bixby & power buttons and USB connect to PC - doesn't work.
When it start up (Vol.up, Bixby & power) the first screen/ page is "samsung" follow by "SAMSUNG Galaxy S10 plus" page. After that, it goes into black screen.
I want to flash my S10+, but I can't booth to recovery mode.
Does anyone has a solution?
Rufur said:
I might have mess up my S10+. I have been trying bootup to recoverey mode without success -
a) Vol. up, Bixby & power buttons - doesn't work
b) Vol.up, Bixby & power buttons and connect to USB headphone - doesn't work
c) Vol.up, Bixby & power buttons and USB connect to PC - doesn't work.
When it start up (Vol.up, Bixby & power) the first screen/ page is "samsung" follow by "SAMSUNG Galaxy S10 plus" page. After that, it goes into black screen.
Click to expand...
Click to collapse
I have recently installed TWRP on my S10+. Ran into the same problem that I couldn't boot into TWRP with known key-combo's...
Recently I found a solution posted somewhere on reddit:
- Plugin usb-c cable and connect that cable to a computer or power brick (official one works best)
- Vol Up, Bixby and Power buttons: keep them all pressed until samsung logo appears, release power btn but keep Vol Up and Bixby pressed.
- Phone should boot up into TWRP recovery
Note; not all usb-c cables and chargers are working properly, i ended up using the official ones from samsung.