Related
Hello guys,
I have a very strange but really bad problem: my omnia7 can't stay in standby.
When I press the power button, to turn off the screen and go in standby (so not the full turn off), my Omni7 wakes up alone, going on the unlock screen. In the same time, the phone rings with the ring that is played when you connect the phone for charging.
I've tried reboot, reset, hardreset, removing the sim-card, turning on/off "battery saver options" ... still that issue :crying:
Anyone has an idea?
I've flashed with a cooked rom (xda-devs Omnia7 Tango V4.0)
my current config :
OS version : 7.10.8779.8
hard version : 3.1.0.4
soft radio version : 2424.11.7.2
hard radio version : 0.0.0.800
loader version : 4.10.1.9
SOC version : 0.36.2.0
Thanks to any ideas, because that problem is killing me
my phone started doing this late last night too! i thorght it was because rain had gone into the power socket but if others are having same problem at the same time maybe not?
has your phone been exposed to water at all recently? is your phone jailbroken? cant realy think of other reasons
the problem stops when the phone is plugged in. is there anything that can trick the phone to thinking it is on charge? I have wphtweaks installed but the options there are not able to stop it
Hi,
I can't remember if my phone has been wet :/ I take care, so my phone never received water. But when I'm outside, under the rain, it's possible.
Today it was better, just a few times my phone wakes up alone.
I'll give you feedback in the next days. Let me know about yours
I managed to trick my phone into silence a few times earlier but it was difficult and then only lasted 5-10 minutes.
if yours didnt get wet it seems unlikely to do with water but I left mine ontop of the aga after removing the battery and over a relativly cool part. A few hours later and it seems to be working fine now.
I will report back if the issue arises again.
EDIT: Ahhhh!! STOP THE RINGING!!! started again this morning
Mine too !
This morning ... the ringing awakening problem !!!!!
But it was better this afternoon.
Really I don't know what happens.
Are we only two persons in the xda world with this problem????
this is realy weird now! mine was doing it in the morning but since about 12pm - 1pm it has been fine! I feel like its something to do with an installed homebrew app maybe.
I also have a custom rom but mine was flashed a long time ago and much older than yours. not sure which version
EDIT (1:10pm GMT): no problems since yesterday
EDIT2 (1:30pm GMT): again i spoke too soon!
Did you guys get this problem sorted out? Had the same problem recently and tried all the suggestions in other threads (bend USB pin, Reset/Restore Device etc) but nothing fixed it, so after being woken at 3am by constant charging tone, took to T-Mobile shop. They said it was a software problem. I said I'd tried all that and the most likely cause I'd seen on the internet was a duff USB port.
Anyway, T-Mobile sent it off for repair and 7 days later - returned and fixed. The repair sheet said software upgrade, but the phone had been reset to bog standard Phone 7, so unlikely. The T-Mobile repair tracking site (excellent) which shows blow-by-blow trace of what and where, showed initial software upgrade/no fix but I used their "contact us" facility to suggest a USB problem and by magic the repair tracking log showed a replacement USB port.
BTW - had to resort to an iphone and HTC android while Omnia was off for repair. Now I know why I like Phone 7 and can't wait for 8. The iphone GUI is so last decade and Android GUI is really just a copy of Windows 6.5 with XDA developers' tweaks isn't it.
Hi Wuzzok,
what do you mean by "bend USB pin" ?
Anyway, it seems like it's finished for me. I didn't get tht strange bug (soft/hard bug???) for a very long time. I just hope it's really over !
Same problem
Hi Folks,
I have the same problem, too. Yesterday afternoon on my way home the phone started ringing with the USB plug sound and always started up itself from standby mode.
As I have a custom ROM (mi7ROM) I first thought it could be a problem with the ROM - although I could not really believe it since it was running stable for months now. I flashed it again and nothing changed - still ringing and starting up itself
I managed to get rid of the sound by deleting the entry in the registry key "Local Machine\Current User\ControlPanel\Sounds\BatteryCharging\Sound" but that does not solve the real problem.
After reading here and in some other WP7 blogs I am sure that this is a hardware problem with the USB plug unit. As my phone is just 11 months old I opened an online ticket at "SAMSUNG online repair service" who promise to answer in the next 24 hours. So I just have to wait and see...
actual state
neutom said:
Hi Folks,
I have the same problem, too. Yesterday afternoon on my way home the phone started ringing with the USB plug sound and always started up itself from standby mode.
As I have a custom ROM (mi7ROM) I first thought it could be a problem with the ROM - although I could not really believe it since it was running stable for months now. I flashed it again and nothing changed - still ringing and starting up itself
I managed to get rid of the sound by deleting the entry in the registry key "Local Machine\Current User\ControlPanel\Sounds\BatteryCharging\Sound" but that does not solve the real problem.
After reading here and in some other WP7 blogs I am sure that this is a hardware problem with the USB plug unit. As my phone is just 11 months old I opened an online ticket at "SAMSUNG online repair service" who promise to answer in the next 24 hours. So I just have to wait and see...
Click to expand...
Click to collapse
Samsung sent me an offer to send the phone in for repair - but what should I say, the problem solved itself. For two days now the phone works normal again. So I had to cancel the service call .
mine hasnt done it in a long time either. looks like its just a temporary thing. I wonder what caused it! For me it started after I was using my phone in the rain and the usb slide was open so thats my suspect.
You may be right. Mine is "quiet" now, since a long time. Water may be the cause.
Update
Hi folks,
mine is mostly quiet again, too. Only few incidents "happen" but they do not last very long - only a few minutes. It's somehow spooky but I do not want to send it in to Samsung now when the error it not constantly reproducible.
I agree with you that there might be a correlation with humidity although I am sure that it did never get wet and I almost always keep the USB-shutter closed. Who knows ...
Sent it in
Finally I sent it in for repair today. It started ringing permananently two days ago...
Now I have to wait and see.
Final state
Okay, I received it back... and it works.
First they did nod find and could not reproduce the failure and wanted to send it back - only with a new flashed image - but fortunately the technician called me and I could describe the problem again. After waiting a few hours, the fault appeared again and they decided to change the mainboard.
I hope, that's all :laugh:
Hello,
Me too it makes me after my omnia 7 is dropped in water, but problem solved.
Me too
WuzzoUK said:
Did you guys get this problem sorted out? Had the same problem recently and tried all the suggestions in other threads (bend USB pin, Reset/Restore Device etc) but nothing fixed it, so after being woken at 3am by constant charging tone, took to T-Mobile shop. They said it was a software problem. I said I'd tried all that and the most likely cause I'd seen on the internet was a duff USB port.
Anyway, T-Mobile sent it off for repair and 7 days later - returned and fixed. The repair sheet said software upgrade, but the phone had been reset to bog standard Phone 7, so unlikely. The T-Mobile repair tracking site (excellent) which shows blow-by-blow trace of what and where, showed initial software upgrade/no fix but I used their "contact us" facility to suggest a USB problem and by magic the repair tracking log showed a replacement USB port.
BTW - had to resort to an iphone and HTC android while Omnia was off for repair. Now I know why I like Phone 7 and can't wait for 8. The iphone GUI is so last decade and Android GUI is really just a copy of Windows 6.5 with XDA developers' tweaks isn't it.
Click to expand...
Click to collapse
Are you really sure that the problem is USB port.. Mine too behave like this. I've tried to remove battery, factory reseting, reflashing ROM. But nothing works. Mine is Samsung focus
post to remove
Hey all,
I have a galaxy s7 edge that's 2 months old. It's randomly freezing which is forcing me to do a hard reset or rebooting. I have done a factory restart by the settings, I have done a factory restart by holding the power, home and volume up key and lastly I have done a smart switch emergency thingy-me-bob.
The phone has never been rooted or messed around with in that matter and was working flawlessly up until this point. It's running all the latest updates you can get OTA - My next step tomorrow is to go into store for them to essentially repeat what I have done for several months...wondering if anyone here has any ideas of anything else I could try? Hoping it isn't a hardware defect.
Cheers,
Tom
Had exactly the same issue. Ran it in safe mode and it still froze. Factory reset - still the same problem. Sent it off to Samsung and got it back a few days ago along with the usual note explaining that the fault had been identified, latest software had been installed and it had passed through quality control. Went through setup and within an hour it was freezing again. Not convinced Samsung did anything other than re-flash the firmware and send it back. I'm guessing that this is a hardware issue, as I have read many posts with people experiencing the same issue. It's going back tomorrow so they can try again, with a note in the box, politely asking them to dig a little deeper....
Did another factory reset and it's frozen while on the always on display svtren. Think I'll be leaving a note asking them to do a physical hardware check!
You have latest software?
As per the original post, everything is running on latest.
Any way, visited the 'Geek squad' who informed me that I had done a factory reset wrong *sigh* restarted it infront of me and would you believe it! crashed. They're now sending it to Samsung to look at who I assume will just flash it again.
Very very disappointed with the edge, compared to my OP3T it's so sluggish.
had the same problem. had to send mine to samsung. there was something wrong with the partitioning i think but in some way odin couldn't fix
Fingers crossed it's something like that is wrong with mine!
I have exactly the same problem.
I'm in aus, and bought the phone from HK, so I'm a bit reluctant to send it back to HK/China.
I've done everything... but still the same.
rockuman_ex said:
I have exactly the same problem.
I'm in aus, and bought the phone from HK, so I'm a bit reluctant to send it back to HK/China.
I've done everything... but still the same.
Click to expand...
Click to collapse
From what I have read, it sounds like a hardware issue. The guy are the store was an utter moron but he did say the harder it is to the fix the more likely they are to just give me a new phone. Once i get it back ill share what they've done and see if it can help fix your issue.
Mine does reboot from time to time. Once a day, once a week...
Sometimes reboots when it stands alone on charging, sometimes in my pocket. I just realizes when my smartwatch vibrates to advert lost bluetooth conection.
Lastest firmware. I´ll probably will send to warranty.
I just recently got the S7 Edge. Great phone I just hates when it does that.
Hi all
the text below is an email exchange between me and joying support. Besides the obvious language barrier I also don't think they are willing or able to do much troubleshooting. I was wondering if anyone here would be kind enough to point me to the right direction.
The problem basically has started after two or three unsuccessful root attempts that most likely left some script that I cannot erase with a factory reset. It could also be one of those very unlucky coincidences where the problem appeared then but rooting was not the cause.
It looks like the unit powers up normally after a period of complete inactivity that has to last at least a few hours and then everything is normal for about one hour. Then it shuts itself off again but will not restart for a few hrs. i didn't get a chance to troubleshoot further and provide detailed timing but I don't think its a heat issue as described elsewhere
After I rooted it successfully I installed the "joying extra tools" but was not really able to use the app.
any help would be appreciated
thanks
Hi I just installed my US-JY-UL135N2 a few weeks ago. It was working fine for a few days but had the same problems described in various posts.
I tried to install superSU in order to install a complete backup application (titanium backup) following the directions from this forum (cant post link yet) first couple of times I was unsuccessful (could not get permission to write the files). After that it started rebooting at random times and sometimes it wont wake up for a few hrs. A couples of days later I rebooted the unit and tried again to root and this it worked. The crashes did not stop so I did a factory reset from the settings menu. When that was completed I looked at the applications and superSU was still there and the crashes continue. I think that maybe some incomplete files have remained when I tried to root the first time. What else can I do? If I did a factory reset shouldn’t it wipe everything? Also should I upgrade from 5.1.1 to 6.0? how? Will that solve the problem?
Do you have support in the USA? Can I talk to someone here?
Dear friend,
Thanks for your email .
Do you mean that the head unit will be crashed after you download the backup application ?
we think that maybe the application is not much more compatible with our head unit .
could you try to directly unload the SuperSu app ? and then check whether it will still crashed ?
and could you show a video to us how it crash ? so that we can know more ?
Hope your positive reply and then we will help you .
Thanks
candy
Thanks
Candy
No I never got a chance to install the application. The unit is now dead it does not start at all so there is noting to show. Is there is a way to make it start? If there is I can uninstall the superSu and let you know if it helped but for now I can't do anything
Dear friend,
Thanks for your reply .
please noted :
You said that you have not installed the application , so how your head unit go dead ? we are a little confusing .
could you please explain what you have done before then the head unit go dead ?
because you also said the Supersu is there , if you have not installed it successfully , bow it will be there .
we hope your kindly reply then we can know that how to help you .
I Said I did not install the backup application (titanium backup) but i did install superSu.
I tried to root the unit but failed a couple of times. The third time I rooted it but then It started random crashes and reboots so I didn't get the chance to install anything else. Can you just tell me if there is a way to restart it or do I have to send it back for warranty repair?
hope you can have a try and feedback us .
Candy
Add joy to your car with Joying !
Because sometimes root also will make mess the head unit .
you can try to update the head unit and then check whether it will solve your problems .
here is the update link : sorry cant post links yet
please try to update (2017-7-7 )
please check whether it can update successfully .
Sent: Wednesday, August 09, 2017 7:03 AM
Subject: Re: US-JY-UL135N2 crashing and wont recover for hours.
Dear friend,
Thanks for your reply .
Sent: Wednesday, August 09, 2017 7:23 AM
To: 'Joying support'
Subject: RE: US-JY-UL135N2 crashing and wont recover for hours.
Hi
The unit came back on today by itself after about 15 hours. I uninstalled superSU and reset it again. I don’t know if its going to be stable this time but I will let you know in a few hours
The update you’re suggesting is 6.01 and I read that there is problems with it. Isn’t it better to stay with 5.1.1?
Where can I find the latest file for 5.1.1?
From: Joying support
----
Date: 8/9/17 11:38 PM (GMT-05:00)
Subject: Re: US-JY-UL135N2 crashing and won’t recover for hours.
Dear friend,
so we suggest that you go to update the system to android 6.0 .
because it will enter the recovery interface . please check whether it can .
Hope your try .
Thanks
Candy
Ok so I left the car off for a few hours and just tried it again. I turned the car on and the unit DID NOT TURN ON AGAIN. It just wakes up whenever it feels like it.
I can’t do anything to it until it turns on again. I there a way to reset it completely?
here is the blog on how to update the android 6.0 : sorry cant post links yet
(please update to 2017-7-7 )
you update the head unit according to the blog , then it will occurred the recovery interface .
Hope you can try .
Thanks
Candy
How do I make it enter recovery?
-------- Original message --------
Ok I just I did the update 2 hrs ago. Then I drove for about 40 minutes and shut off the car. Went back 20 minutes later and tried it and it turned on without problem. I just tried it again now and it won’t turn on. I don’t know what else to do at this point. Is there a way to get logs when it turns back on? It usually turns back on after 6-7 hours
From: Joying support
Sent: Thursday, August 10, 2017 6:25 AM
To: Spiro S
Subject: Re: US-JY-UL135N2 crashing and won’t recover for hours.
Dear friend,
additional observations/thoughts
I just noticed something else. When I start the car in the morning to go to work the headunit is always on immediately. Does this mean that it stays on after it restarts itself at some point at night ? or does it boot up that fast? (less than a second)? I dont remember ......if this is a heat issue and it started at the same time as when I was trying to root it wouldn't that issue kind of go away when I installed 6.0.1? its supposed to have better cpu management right?
idlt said:
Ok I just I did the update 2 hrs ago. Then I drove for about 40 minutes and shut off the car. Went back 20 minutes later and tried it and it turned on without problem. I just tried it again now and it won’t turn on. I don’t know what else to do at this point. Is there a way to get logs when it turns back on? It usually turns back on after 6-7 hours
Click to expand...
Click to collapse
In my opinion it's the heat that's causing the problems combined with with the fact that maybe some of the electronics gave out. It returns back to life when it's cool enough.
Either way make a video demonstrating the issue, complain and demand a new unit under warranty.
In the meantime you can install an app that can monitor the CPU temperatures
Like :
1. https://play.google.com/store/apps/details?id=info.kfsoft.android.MemoryIndicator
2. https://play.google.com/store/apps/details?id=com.yanyan.cputemp
That can display the temperature at all times no matter the app that you are in
Use this app to test the stability and temperature under heavy CPU load : https://play.google.com/store/apps/details?id=com.into.stability
Check the temperature it reaches before blacking out.... it could be the CPU giving out on high temps or maybe something else... just a thought...
Thank you for your reply I will try to work around its schedule and do that. I just went and disconnected the power completely so it stays cool until I'm able to work on your suggestion. Hopefully after work it will start up normally and I can sit there for an hr looking at the temperatures (not happy bout that for a brand new unit) .
the funny thing is that it gives out when the car is off so the unit should be on sleep. How can the temps go up high enough to shut it off when its not even doing anything? The dormancy setting is on so I was assuming it went to sleep.
here is the reply i got from joying below. Basically suggesting to do what I have already done to it
Also some people suggesting sending them a video but a video of what? when its on its running ok when its off its off for hrs and when it comes back its normal again.....it would be a veeeery boring video
Dear friend,
Thanks for your well-cooperated with us together .
please noted :
1) we think that the files on the head unit maybe mess after your root the head unit .
2) So now the head unit can not turn on again , and it may turn back on after 6-7 hours ?
3) if yes , please try to do following processes and check whether will be workable for your problems :
1. Download the update file from window syetem computer, then upzip it and copy the files into
SD card without any folder. Then please insert the SD card into GPS maps card slot.
The files also will be the same updated file :
2. Put ACC wire(red one) and BATT wire(yellow one) together, then connect it to positive power supply 12V;
Put GND wire(black one) to GND.
3. Turn on the head unit,it stuck on JOYING logo, please click "reset"( first time).
4. After the first time reset, the item will restart and it stuck on JOYING logo, please click" reset"(second time)
5. After the second time reset, the item will reboot and it stuck on JOYING logo, please click " reset"(third time)
6. After the third time reset, please don't power off the head unit and wait for a while to update the head unit.
Then watch this video to learn how to update the system: xxxxxxxxxxx
Please check whether it can appear the "Joying logo " and go on the processes we suggested .
Thanks for your time
Candy
Add joy to your car with Joying !
Please have a try . and then feedback us how it going on ?
Thanks
Candy
Oh man... you made a big error telling them that you rooted the unit... rooting had nothing to do with the behavior at hand but it's enough to give them something to talk about and delaying to delivering a new unit.
What you should have done before telling them you have a warranty problem.
1. Start the default Joying File Manager go to the internal storage, select all, delete
2. Take out all the SD card and USB sticks and DON'T put them back
3. Reset the unit to defaults, that does not remove root but removes all the apps and settings
4. if the unit is still unstable and it seems related to heat... wait till it cools down
5. prepare a stick with the firmware that you have already on the unit for a reflash
6. flash the unit - now the root is gone - everything is back the way it was when you bought the unit
7. test for stability... if you still have issues that means it's not software it's hardware.... warranty time.
Thanks a lot man!
You have no idea how many times I searched for a way to restore back and wipe all data because I could still see the garbage in there even after a factory reset but couldn't find out how to.
I will follow your steps and then call it a day because it would have to be a heat issue at that point
I ts funny though that it didn't show up prior to root.
On the rooting issue now. I thought they provide a link on "how to root" on their blog....I didn't think I was doing something wrong by just rooting it. I didn't really get a chance to use the root access anyway! You would think they would provide a way to do a full back up in case something went wrong this way we didn't have to resort to rooting
thanks again. I will update the post when I have news
BTW does anyone know what temp the CPU should be running at? or whats the max before it shuts down?
idlt said:
BTW does anyone know what temp the CPU should be running at? or whats the max before it shuts down?
Click to expand...
Click to collapse
Search!
The past weeks have been full of this in 2 threads: the upgrade thrad and the heatsink thread.
And edit, who also answered you in this post, added even more on this in his Q&A thread, which you obviously also missed.
Update .....and some thoughts
@ surfer63. Point taken....I realize I was been lazy. Please accept my sincere apology for taking all the work you guys do for granted.
I don't have much to contribute but here is an update on my issue and also some thoughts on what to do in order to be able to enjoy the best of both worlds _Reliability and function_ in a car radio experience.
BTW. I ripped out my very expensive but very restrictive factory rocford fosgate navigation/camera/Bluetooth/overhead console/back up sensor/ infrared headphone ..blah, blah, blah system in order to install this one, so I had high hopes that I could get this to at least function somewhat reliably but I've been driving for two weeks without a radio or Bluetooth for my phone.
anyway...
Joying USA finally came through with a solution. They offered to send me a 6021 to replace my most likely burned out 5009 unit _new one is on the way_
I had to pay shipping and I was charged $300.00 for the unit but I will be refunded $200.00 when I send the other one back. I'm happy that at least I will have a radio again and have learned my lesson about how real a Chinese warranty is. I hope I wont have any problems getting my $200.00 refund ( I have only used the old radio for about 2 weeks before it burned out)
I chose to "upgrade" to the 6021 _ It would be the same cost for either unit _ because I was told it is more stable after the re-design of the main board and the LCD board. I'm hoping that the overheating issue will be less of a problem with this one although I read reports to the contrary....
I also took surfer63's advise and read up a little and I now know that there is no way to rely on a Chinese android unit to replace a factory head-unit or even a brand name one for that matter because the stability is not there yet (my opinion). We should probably be thankful though that at least Joying and others are not afraid to try and provide this alternative.
I also read up on all the newest high end brand name head-units and nothing has changed since last time I looked. They are all crippled, restrictive and proprietary for the most part when it comes to peripherals. They offer really good sound quality but the ones with the most features also suffer from software and hardware glitches though less frequent than the Chinese ones. The Chinese android units do offer a glimpse into the future but my experience is that they are not at all reliable or fully functional. I believe that in a car environment the most important functions are ease of use, radio reception and phone/Bluetooth quality and reliability (terrestrial radio is still more reliable than internet radio for people that want to listen to the news or traffic updates or local events and such...) . Once that's covered then I guess sound quality, internet connectivity for online content, online navigation and voice commands as well as other similar features become important.
I don't think there is one single head-unit out there that covers all that but maybe not all hope is lost.
My solution is to purchase a single din head-unit with a reliable radio, good sound quality, stellar quality hands-free phone Bluetooth function and maybe USB phone connectivity. I have a spare space in my console so I will install that in there and install the Joying unit _or the next android experiment_on the double din space above. If space is not available on the console one could probably hide it in the glove-box or under the dash.
when the Joying dies again _notice I wrote "when" not if... I can revert back to the simple one until I replace it with the next upgrade or maybe with a tablet. They now make some nice built in mounts for them https://soundmanca.com/
I haven't had time to research the single din unit yet but it most likely will be one of the major brands. maybe this one https://www.amazon.com/Pioneer-DEH-...ud-20&linkId=644693c89a21ea33f675e3023ce5cc4b
I will try to figure out a way to make them both work through the same amplifier and be able to use the hands free function on the single din one, navigation and backup camera on the android and have the choice to play music from either one. I'm not sure how to do that yet but looking into it now. Maybe I can use the Aux input or another "source" input on the single din one which could also be wired to the factory steering wheel controls so that when I answer the phone the AUX switches off and the hands free takes over. I think when the phone call ends it would have to switch back to AUX . I will try to update this post when I figure this out and in the mean time I welcome any thoughts or suggestions
Thank you all for your support
Sorry for the n00b'ness of this post. I tried to post the link directly to the unit, but the forum is preventing me from doing so. If you search for "H276L" on seicane(dot)com, it's the more expensive (8-core) unit.
I'm highly considering buying this unit, but I want to make sure there are ROMs that are being developed for it. I had an MTCB Joying unit in my last car that worked like crap until I found a good ROM for it on here. If this unit's platform isn't being developed on here, I have no interest in buying it. Being a Jeeper, it'd be super handy to have my trail apps (Gaia GPS, AllTrails, etc.) run directly on my head unit, but if I'm going to spend $ on my HU, I'm gonna get one really worth my while.
TIA!
-A
Looking for Roms!
Hello,
I recently did purchase this unit and I have been extremely unhappy with the stock ROM. I am looking now to root the device later today (putting together a tutorial right now. I am still looking for a ROM however. The initial unit seriously has no apps that function fully. Every app force closes or doesn't function as expected. I am extremely technical and can usually fix any issues. I worked with Seicanes (non-existent) support for the last month with no success. They will require you to pay shipping to and return (so basically if you ship it back and want another you are spending a few 100 more). I am going to try and root and install custom ROM instead, if I can find one.
Thanks,
Brady
aklino said:
Sorry for the n00b'ness of this post. I tried to post the link directly to the unit, but the forum is preventing me from doing so. If you search for "H276L" on seicane(dot)com, it's the more expensive (8-core) unit.
I'm highly considering buying this unit, but I want to make sure there are ROMs that are being developed for it. I had an MTCB Joying unit in my last car that worked like crap until I found a good ROM for it on here. If this unit's platform isn't being developed on here, I have no interest in buying it. Being a Jeeper, it'd be super handy to have my trail apps (Gaia GPS, AllTrails, etc.) run directly on my head unit, but if I'm going to spend $ on my HU, I'm gonna get one really worth my while.
TIA!
-A
Click to expand...
Click to collapse
jerkface41606 said:
Hello,
I recently did purchase this unit and I have been extremely unhappy with the stock ROM. I am looking now to root the device later today (putting together a tutorial right now. I am still looking for a ROM however. The initial unit seriously has no apps that function fully. Every app force closes or doesn't function as expected. I am extremely technical and can usually fix any issues. I worked with Seicanes (non-existent) support for the last month with no success. They will require you to pay shipping to and return (so basically if you ship it back and want another you are spending a few 100 more). I am going to try and root and install custom ROM instead, if I can find one.
Thanks,
Brady
Click to expand...
Click to collapse
Thanks Brady,
Please keep me posted. I pulled the trigger on this guy 2 days ago -- waiting for it to ship. I had an Eonon unit in my Cadillac, and it was the same story. Support is useless, stock ROM is crap, but with the right ROM, it becomes awesome.
-A
aklino said:
Thanks Brady,
Please keep me posted. I pulled the trigger on this guy 2 days ago -- waiting for it to ship. I had an Eonon unit in my Cadillac, and it was the same story. Support is useless, stock ROM is crap, but with the right ROM, it becomes awesome.
-A
Click to expand...
Click to collapse
Hello,
After many trial and error attempts I was able to finally find an extremely amazing OS! Malaysk is the way to go once you get your Seciane Unit. Everything works fully and is extremely easy to use. The installation was really easy honestly and it didn't take long to get it to work correctly. If you go to: https://forum.xda-developers.com/member.php?u=3590033 you can view the forum based on the unit you have and get the correct firmware. I used the free (LITE) version for about 1 week and then decided to pay the $20 to the developer to get the full version (SO WORTH IT!!). @Malaysk did an amazing job and this is the way to go!
Thanks,
Brady
jerkface41606 said:
Hello,
After many trial and error attempts I was able to finally find an extremely amazing OS! Malaysk is the way to go once you get your Seciane Unit. Everything works fully and is extremely easy to use. The installation was really easy honestly and it didn't take long to get it to work correctly. If you go to: https://forum.xda-developers.com/member.php?u=3590033 you can view the forum based on the unit you have and get the correct firmware. I used the free (LITE) version for about 1 week and then decided to pay the $20 to the developer to get the full version (SO WORTH IT!!). @Malaysk did an amazing job and this is the way to go!
Thanks,
Brady
Click to expand...
Click to collapse
Brady, thanks for this link. I have h221 and it appears I might be able to use the rom. What I can't do is get into recovery, and I can't get into developers options. I'm on a stock Android 9 and for some reason, they disabled the ability to tap the build # seven times to get to developers options. Did you have this problem, and how did you get into recovery mode. I searched everywhere and tried all combos of holding the reset button, no luck. I emailed secaine but no luck so far. Any help appreciated, Thanks johnm
Update and recovery instruction
Great to hear! I actually had the exact same issue as you and I found that seicane was of no help. However I finally figured out how to get into recovery mode (don’t need to do anything with rooting or getting into developer options). To get into recovery you should have a pin hole reset button. Do the following steps.
1. Hold in reset button until unit powers off and you see side buttons blink (10-20 seconds it usually took)
2. Immediately after this happens let the reset switch go
3. Immediately after this hold in button again until lights blink once (about 1-2 seconds)
4. Press and release button a third and final time and it will boot into recovery mode. (Quick press release)
After I got into recovery I wiped cache, then factory reset, rebooted, installed the recoveryinstaller apk file (included with Rom download) it reboots you and installs new rom and you will be good to go!
Thanks,
Brady
I'm wondering if anyone here has dealt with an ATOTO A6 bootlooping after doing playstore updates. From what I could gather from their support site, it's fairly common and usually a reset fixes it.
Well I have this problem as it stopped booting after doing a bunch of playstore updates. Did them one day, let the truck sit overnight and next morning turned it on and unit boots up to the first boot image and that's it. Never goes further.
I've been trying to work with ATOTO for a week now, and I think they are truly clueless. They told me I needed the remote control and it could reset the system. They acted like it would start a full blown system recovery and then I'd have a "fresh" unit again. So I followed their commands after getting the remote in and nothing. It acts no different than hitting the reset button on the front of the unit.
Has anyone gone through this? I have a feeling I will have to ship it to them all the way on the other side of the country, but it's been less than 6 months. I really can't see having to ship this out to them every 6 months to be fixed. It seems to me that there should be a way to force a full system recovery just like any android phone or tablet I've ever owned or messed with when something goes wrong. I don't have a male to male USB cable to mess with it myself.
So I am really just hoping someone has already been through this and figured it out and my google fu sucked and the countless threads I've read, I've just missed the right one