Related
Information: If you're experienced with ADB/Fastboot or Manual Android Rooting, you could read this thread and see if you find something that seems wrong and report to me, thanks!
IntroductionHello there!
I decided to create a new Nexus 7 Rooting Guide, I know that there are some guides already, but I have a few reasons to make this guide.
Unlike many rooting guides, this one doesn't use an automated program (a.k.a Toolkit) and it works for both Nexus 7 Wi-Fi and Nexus 7 3G.
This guide has been tested with a Nexus 7 3G Edition, running Android 4.2.1/4.2.2.
Last Topic Update: Never
Last Minor Topic Update: Check thread edit date!
Requirements:
Nexus 7 (Wi-Fi or 3G Edition)
Android SDK
ADB/Fastboot Drivers
Unlocked Bootloader
If you don't have ADB/Fastboot drivers installed, please check out this thread:
http://forum.xda-developers.com/showthread.php?t=1907796
See Basic Knowledge and Driver Installation parts.
If you have Android SDK and ADB/Fastboot drivers installed and working, you can continue reading.
Make sure you have USB Debugging enabled in your Nexus 7.
Don't forget to unlock the bootloader!
Warning: You're the only one responsible if something bad happens to your device!
Nothing bad is going to happen, but there is always a small risk.
Personally, I recommend having +60% of Battery during ROM Changes (Flashing and etc).
I also recommend you to learn how to do a Factory Image Restore (Flash Stock ROM) before attempting to root...
Rooting your Nexus 7
To root our device, we're simply going to put in our tablet a small program called "SuperSU", you might want to download it now to your PC:
SuperSU v1.04
Basically, we´re going to put SuperSU in /system partition, the file you downloaded is a "Flashable ZIP".
We're going to use TWRP (Team Win Recovery Project) to flash the Flashable ZIP (In this case, SuperSU), after flashing SuperSU you get root privileges!
Now, go to your Android SDK Folder where Fastboot (fastboot.exe) is located (platform-tools), open a command prompt and change directories to your Fastboot location, if you need help just search on Google.
Now, you have CMD (Command Prompt) open with the Android SDK Directory, and we need to reboot your device into Fastboot mode, to do that just type the following:
adb reboot-bootloader
Click to expand...
Click to collapse
You're now in Fastboot Mode (a.k.a Bootloader), type the following to make sure you're in Fastboot Mode:
fastboot devices
Click to expand...
Click to collapse
You should see something like this:
Code:
> fastboot devices
# the following output should be returned
<device serial number> fastboot
Type "fastboot reboot" to reboot the device, then copy the SuperSU.zip you downloaded to your Nexus 7.
I also forgot to tell you to download TWRP, if you have the Nexus 7 Wi-Fi Edition, your board codename is Grouper, if you have the 3G Edition, your board codename is Tilapia.
TWRP for Nexus 7 [grouper]
TWRP for Nexus 7 3G [tilapia]
Copy the correct TWRP Edition to your Nexus 7, then boot into the bootloader.
Temporarily boot TWRP using the following command:
fastboot boot TWRP.img
Click to expand...
Click to collapse
Replace "TWRP.img" with the correct file name.
You can also flash TWRP instead of temporarily booting.
Inside TWRP click "Install" and select the SuperSU ZIP File, then Confirm Flash.
After flashing, reboot your device and you should have SuperSU installed. (Open SuperSU just to test)
Congratulations! You now have a Rooted Device!
To make sure you have rooted, download "Root Checker" from Google Play.
ConclusionAs you can see, this tutorial is a little different from others, I explained what we were going to do and also explained the commands instead of giving you directly the commands.
This tutorial was written to teach the basics of ADB/Fastboot, I hope you rooted your device without problems and learnt/learned something, have a good day!
Feel free to give suggestions or corrections!
This work is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported License.
Just for newbies wondering what this really means:
1. install and boot into TWRP/CWM recovery means you boot up a 'mini' linux which can do whatever it wants(as root) to any of the partition on the device(including the /system one)
2. the supersu package contains 2 files(an APK and the more importantly 'su') plus some update scripts that (1) would run and copy them to the appropriate places(mainly the 'su' which is the only file that is critical)
I think you need to mention the bootloader unlock someplace.
Perhaps you can find those specific instructions in another good reference thread; but if not then, at a minimum you should put it in your prerequisites list.
In the narrative as it stands, you casually mention the other thread
[GUIDE] Flashing a Factory Image with fastboot / return to stock
but don't insist that your reader looks at that thread.
But the time for doing the unlock sequence follows the begginers first (fastboot) driver installation, so unless someone reads that thread pretty thoroughly, they will skip it in your description here, and will get stopped out at
Code:
fastboot boot TWRP.img
which needs the privileges of an unlocked bootloader. Since unlocking the bootloader currently entails performing a full-phone wipe, the consequences of that are pretty significant and shouldn't be skipped over.
cheers. Thanks.
bftb0 said:
I think you need to mention the bootloader unlock someplace.
Perhaps you can find those specific instructions in another good reference thread; but if not then, at a minimum you should put it in your prerequisites list.
In the narrative as it stands, you casually mention the other thread
[GUIDE] Flashing a Factory Image with fastboot / return to stock
but don't insist that your reader looks at that thread.
But the time for doing the unlock sequence follows the begginers first (fastboot) driver installation, so unless someone reads that thread pretty thoroughly, they will skip it in your description here, and will get stopped out at
Code:
fastboot boot TWRP.img
which needs the privileges of an unlocked bootloader. Since unlocking the bootloader currently entails performing a full-phone wipe, the consequences of that are pretty significant and shouldn't be skipped over.
cheers. Thanks.
Click to expand...
Click to collapse
Hello!
Thanks for your answer, I completely forgot about the "Unlocking Bootloader" part, tomorrow when I get some time I will edit the thread...
Have a good day/night.
Edit: Added "Unlocked Bootloader" to the requisites list and a small note after "Make sure you have USB Debugging enabled in your Nexus 7", tomorrow I may edit the thread again.
Edit 2: I think the essential part is written, and because I'm a little busy, I will leave (temporarily) this thread. You're free to enhance this guide and re-publish it following Creative Commons Attribution-NonCommercial 3.0 Unported License.
Edit:
[Procedure] http://forum.xda-developers.com/showpost.php?p=64841837&postcount=27
Edit/
I am creating this thread dedicated for me and other beginners "noobs".
Where should I begin as a beginner?
I am looking to unlock and root with latest MM that motorola supplies.
Things you should know about me:
I have no idea how to use adb.
I have no idea how to unlock & root or even if I should but I don't like ads.
I have no idea which firmware to use.
http://forum.xda-developers.com/moto-x-style/development/pure-firmware-tuff-wip-t3224833
http://forum.xda-developers.com/mot...rom-stock-rooted-debloated-x1575-6-0-t3262242
I am completely lost.
I have not gotten my phone yet, I ordered it this morning and will be here Friday. I am just trying to compile sources and info.
Thanks a bunch guys, I really need help with this.
One piece of advice for starters just since you used the word noob. Never mod your phone on a low battery. You can mess a phone up enough to break offline charging, and without a removable battery that you can swap out or charge in a cradle that could get awkward in a hurry on this phone. I always make sure I'm >75% just in case. You can fastboot your way out of all kinds of trouble; but not if your battery is dead and your phone is so screwed up it is not offline charging.
Your phone will probably show up with Android 5.1.1 installed, at least I got mine about 3 weeks ago and it did. Once it is through initial setup it should want to apply an OTA to Android 6.0 right away; if not check for it in Settings -> About -> System updates and it should find one. Just let it update before you do any setup or app downloading.
Once you're on MM, before you do any setup you have to unlock your bootloader if you intend to root. You'll get all the warnings about voiding warranty and here there be dragons, so be prepared for that. Also, unlocking the bootloader will wipe your internal storage, so don't bother with any setup or app downloading before you do it.
Start with Heisenberg's thread. It is a great guide on how to setup your computer for adb and fastboot as well as all the syntax you need for unlocking the bootloader and installing a custom recovery. Make sure to get the 2.8.7.1 version of TWRP that is patched to work with the MM bootloader.
When you boot to TWRP recovery for the first time it will ask if you want to keep system read only. Keep system read only and make a backup immediately. I usually make one backup of boot, system, and data, and a separate one of just efs; don't worry if you don't understand, you'll figure it out when you get there. TWRP is all touch based and pretty intuitive. This way you have good, untouched system backup to fall back on just in case.
When it comes to rooting MM, don't use the old system install method. Flash a SuperSU from this experimental systemless root thread (I used this instead of the ivcarlos method linked to the Heisenberg thread because it is more automated and easier). I can vouch for the 2.62-20151210170034 version of SuperSU. I've used it to root stock MM on this phone 3 or 4x as I've restored backups and changed kernels. I've heard the 2.64 and above SuperSU versions are not working with this phone on MM, and the older traditional system root methods like the v2.49 version that is linked to the Heisenberg thread are causing bootloops on MM. Don't panic on first boot after the systemless root; it appears to bootloop once but comes up normally the second time.
One other thing, TWRP doesn't seem to be able to detect the systemless rooting method, and it really wants your phone to be rooted. If/when TWRP offers to automatically install SuperSU, don't let it - ever - it will keep asking. It must use the old method that causes bootloops on MM, not the new systemless method linked above.
Once you're all rooted and settled in, if you get sick of the unlocked bootloader warning you can fix it by reading up in this thread. Just be sure to read carefully and get the MM logo and not the LP logo.
Wow, thank you so much for the long type up.
Duly noted and this is a great start. May I continue here if I run into any problems?
I think ima have fun with this phone
I am into tinkering with devices, "sometimes linux" etc, like my PC OS win7x64 is modified big time, so I probably will catch on with unlocking rooting etc very quickly.
I got chillz and cannot wait!
Read a lot. Do a lot of reading on the topic before trying it. Basically learn all the possible errors or negative outcomes before they happen, so your not blindsided and are ready for anything that can happen.
gokart2 said:
Read a lot. Do a lot of reading on the topic before trying it. Basically learn all the possible errors or negative outcomes before they happen, so your not blindsided and are ready for anything that can happen.
Click to expand...
Click to collapse
Will do. I was reading, flashing can screw up the modem,wif and what ever else.
I hope I don't screw it up.
Hitti2 said:
Will do. I was reading, flashing can screw up the modem,wif and what ever else.
I hope I don't screw it up.
Click to expand...
Click to collapse
Good luck :good:
I just noticed one thing that might not be entirely clear in the Heisenberg thread. It says to enable adb in the Settings -> Developer Options menu, but by default you won't have a Developer Options menu.
To get one, go into Settings -> About Phone, scroll all the way to the bottom, and tap on build number about 8 or 10 times. Your phone will say something to the effect of congratulations now you're a developer, and you'll have the menu.
Edit: i just noticed it says how to enable developer options further down the page
ty, I will need it lol.
Dev options were on my S5 too. My pops showed me how to on the S5, kinda hoping it was the same way to enable them, turned out to be. Cool.
gokart2 said:
Read a lot. Do a lot of reading on the topic before trying it. Basically learn all the possible errors or negative outcomes before they happen, so your not blindsided and are ready for anything that can happen.
Click to expand...
Click to collapse
^^^This^^^
and remember what XDA is really for ...http://forum.xda-developers.com/showpost.php?p=2031989
with that, enjoy all the reading, and do not be afraid to look at other sites too, there are even videos around that can help guide you...
and there are fellow members here to help...but most questions have already been asked and answered, so search first! Cheers! :highfive:
This might sound so stupid.
So, I will begin with the recommendation of installing twrp as my first step.
http://forum.xda-developers.com/showpost.php?p=64545146&postcount=131
1) Be sure to get the newest TWRP that has been patched for M.
Click to expand...
Click to collapse
How do I go on installing this TWRP? Does it include flashing TWRP to the phone? Or is an app? I don't understand.
How many ROMs can be flashed to the phone, 2? TWRP & Marshmallow?
Hitti2 said:
This might sound so stupid.
So, I will begin with the recommendation of installing twrp as my first step.
http://forum.xda-developers.com/showpost.php?p=64545146&postcount=131
How do I go on installing this TWRP? Does it include flashing TWRP to the phone? Or is an app? I don't understand.
How many ROMs can be flashed to the phone, 2? TWRP & Marshmallow?
Click to expand...
Click to collapse
Sounds like you need to do more studying and reading
TWRP is not a ROM, it is a custom recovery image, which allows you to flash ROMs.
Start here..http://androiding.how/root-moto-x-pure/
Then go here..http://forum.xda-developers.com/mot...l-windroid-universal-android-toolkit-t3206883 for a good tool. (May have already been linked above...)
[Q] Where should I begin as a beginner?
At the beginning, of course.
Sorry couldn't resist...
Naddict said:
Sounds like you need to do more studying and reading
TWRP is not a ROM, it is a custom recovery image, which allows you to flash ROMs.
Start here..http://androiding.how/root-moto-x-pure/
Then go here..http://forum.xda-developers.com/mot...l-windroid-universal-android-toolkit-t3206883 for a good tool. (May have already been linked above...)
Click to expand...
Click to collapse
Tyvm.
Before I proceed, I need to backup, right? How do I go forth doing a backup?
Also, I am updated on MM, does those two links above work on MM?
Hitti2 said:
Tyvm.
Before I proceed, I need to backup, right? How do I go forth doing a backup?
Also, I am updated on MM, does those two links above work on MM?
Click to expand...
Click to collapse
after you unlock and install custom recovery, you use TWRP (the custom recovery) to create the backup...
as you are on MM, you cannot use the "all in one" application that I provided in the link...so you will have to manually install/flash your rom
Wow im so frustrated. I think i give up. There is no guides upto date to do exactly twrp, backup, install w/e n root for ota mm.
I'll donate 30 usd via paypal if someone can.
Hitti2 said:
Wow im so frustrated. I think i give up. There is no guides upto date to do exactly twrp, backup, install w/e n root for ota mm.
I'll donate 30 usd via paypal if someone can.
Click to expand...
Click to collapse
Clearly you are impatient (not trying to be rude here), - XDA truly is not a place to pay for someone to do it for you, XDA is about learning and development, there are several places that a search will get you what you need. Many members have also posted links above to vast amount of information (specifically this post and this entire thread here http://forum.xda-developers.com/showpost.php?p=64183396&postcount=151 and here too http://forum.xda-developers.com/showpost.php?p=64311581&postcount=171) that you should take time to read and then, as you move through these things then you ask questions.
Offering to pay to have someone do it for you is really not what this site is about.
Read, do google searches...it has been done a hundred time already mate, take the time to learn what it is you are doing before actually doing it.
I dont have 400 to spare for for another phone if i brick this one because i was pointed to all kinds of mixed links. Ionno ill wait till someone comes up with a guide then.
Thanks.
Edit:
Let it be known as well, because you know how to milk a cow doesn't mean I know how to milk a cow. Or change a complete motor out of a vehicle etc.
Not being a smartarsh either. I'll prob end up like this guy https://www.reddit.com/r/MotoX/comments/3z2e6g/stuck_rooting_moto_x_pure_on_60/
And I read this, http://forums.androidcentral.com/moto-x-pure-edition/622331-6-0-marshmallow-root.html#post4899736
Dunno which one to go for.
I'm done for today, I'll come back tomorrow to upset with this.
Hitti2 said:
I dont have 400 to spare for for another phone if i brick this one because i was pointed to all kinds of mixed links. Ionno ill wait till someone comes up with a guide then.
Thanks.
Edit:
Let it be known as well, because you know how to milk a cow doesn't mean I know how to milk a cow. Or change a complete motor out of a vehicle etc.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=2031989
Hitti2 said:
Not being a smartarsh either. I'll prob end up like this guy https://www.reddit.com/r/MotoX/comments/3z2e6g/stuck_rooting_moto_x_pure_on_60/
And I read this, http://forums.androidcentral.com/moto-x-pure-edition/622331-6-0-marshmallow-root.html#post4899736
Dunno which one to go for.
I'm done for today, I'll come back tomorrow to upset with this.
Click to expand...
Click to collapse
Looks to me like several folks in there offered suggestions on how to successfully get root ...and again, as my last helpful post here...you really need to read Heisenberg's thread, that guide works, and from what I can tell, you have to use systemless root.
Ok, I will follow
Intro
This thread will serve as a location for basic how-to guides for the Moto X Pure. I'm going to start off with a couple of the more obvious ones and go from there. If anyone has any suggestions for additions please feel free to let me know.
Prerequisites:
You'll need a working adb/fastboot environment on your PC to get through some of these guides. Go here to download the Android SDK, which will give you most updated version of adb and fastboot. Scroll to the bottom of the page and find Other Download Options>SDK Tools Only, and grab the right version for your OS. While it's downloading create a folder in C:\ called SDK (C:\SDK). Once you've downloaded the zip you can extract it into your C:\SDK folder. Navigate to C:\SDK\android-sdk-windows and open SDK Manager.exe. In SDK Manager you need to install the following packages:
Tools> Android SDK Tools, Android SDK Platform-tools
Extras> Android Support Library
Once you have installed those, inside C:\SDK you should see some new folders, one of them will be called platform-tools, within that folder you should see fastboot.exe and adb.exe. I'll refer to this as your fastboot folder/directory or working folder/directory during this guide. To make sure adb is correctly installed, open a command prompt from within your fastboot folder (hold shift + right click, select open command prompt here) and issue this command:
Code:
adb version
If it returns a version number for Android Debug Bridge then you're good to go.
You'll find Motorla drivers here, download it and install, then reboot your PC.
You can test adb by connecting your device to your PC while booted into Android (making sure that adb/usb debugging is enabled in Settings>Developer Options) with the screen unlocked and issuing this command:
Code:
adb devices
It should return your device serial number, if so, adb is working.
You can test fastboot by connecting your device to your PC while booted into fastboot mode (power + volume down) and issuing this command:
Code:
fastboot devices
It should return your device serial number, if so, fastboot is working.
By attempting any of the processes listed this thread you accept full responsibility for your actions. I will not be held responsible if your device stops working, catches on fire, or turns into a hipster and claims to have been modified before it was cool.
Index
How To Unlock Your Bootloader
How To Install A Custom Recovery On Your Device
How To Make A Nandroid Backup With TWRP Recovery
How To Root Your Stock Rom
How To Install A ROM with TWRP Recovery
How To Install A Custom Kernel With TWRP Recovery
How To Make Sure You Can Pretty Much Always Recover From An Accidentally Wiped System
1. How To Unlock Your Bootloader
Go into About Phone in Settings, click on Build Number 7 or 8 times until it says you have enabled Developer Options. Go back to Settings and enter the newly opened Developer Options section, scroll and click on the Enable OEM Unlock option.
Power off your phone then boot into fastboot mode (power + volume down).
Connect your phone to your PC via usb cable.
Open a command prompt from within your fastboot folder (navigate to where you have fastboot.exe located on your PC, shift + right click anywhere within that folder, select open command prompt here).
Check your fastboot connection by issuing this command:
Code:
fastboot devices
It should return your device serial number, if not you need to make sure your drivers are installed correctly.
Once you've confirmed your fastboot connection issue this command:
Code:
fastboot oem get_unlock_data
It should return something like this:
Code:
(bootloader) 0A40040192024205#4C4D3556313230
(bootloader) 30373731363031303332323239#BD00
(bootloader) 8A672BA4746C2CE02328A2AC0C39F95
(bootloader) 1A3E5#1F53280002000000000000000
(bootloader) 0000000
Copy that code (with no spaces between the characters) and paste it somewhere for safekeeping, you'll use it in a minute.
Go to the Motorola bootloader unlocking page. You'll need to create an account with Motorola if you don't already have one. Once you're signed in you can scroll down to step 6 and paste the above code into the text field and hit the “can my device be unlocked” button.
Read the terms and conditions and accept them if you agree (you can't continue unless you accept).
Click the “request unlock key” button and an email with your unlock token will be sent to the email account that you signed up with.
Once you have retrieved the token from the email you can use it within the following command to unlock your bootloader:
Code:
fastboot oem unlock xxxxxxxxxx
(Replace the xxxxxxxx with your unique unlock token)
Your bootloader is now unlocked!
Reboot with this command:
Code:
fastboot reboot
It's now safe to disconnect your usb cable.
Please note: this will erase all user data from your device, it is best to do this before you really start using the device and installing apps or putting data on the internal storage
2. How To Install A Custom Recovery On Your Device
Prerequisites: unlocked bootloader.
Download the recovery of your choice, here's TWRP.
Make sure you check the md5 to verify its integrity (where possible).
Place the file in your fastboot folder (this is where fastboot.exe is located on your PC).
Put the phone in fastboot mode and connect it to your PC via usb cable.
Open a command prompt from within your fastboot folder (shift + right click, select open command prompt here), and enter the following commands:
Code:
fastboot flash recovery <filename>.img
(Replace <filename> with the actual filename of the recovery, the recovery filename in the command will change depending on which recovery you're flashing)
Wait for the recovery to flash, it'll only take a few seconds, you'll get a finished message in your command prompt window once it's done.
It's now safe to disconnect your usb cable.
Don't reboot the phone normally, use the volume buttons to highlight recovery and press the power button to select it. This will stop the stock OS from patching it with the stock recovery in boot. Once you've booted into TWRP like this once, you can reboot normally.
3. How To Make A Nandroid Backup With TWRP Recovery
Prerequisites: unlocked bootloader, TWRP recovery.
A nandroid backup is a very important thing to have before installing any custom software on your device. It's basically a backup of your stock system that you can fall back on if anything goes wrong or if you just want your stock ROM back. You can also use the backup tool to create a backup of your favourite ROM set up exactly the way you like it. The backup you create can be easily restored using the restore tool in TWRP recovery.
All you need to do is enter TWRP recovery, select the backup option from the TWRP home screen, check the system/data/boot boxes, and swipe to backup. The process will take a few minutes.
Click to expand...
Click to collapse
& I will follow
Hello guys!
I make my own ROOT (systemless, thanks for Chainfire) images for Moto X Style with Marshmallow (build MPH24.49-18). Its use "experimental" systemless SuperSU version 2.56 - more info on http://forum.xda-developers.com/show...35&postcount=2. No need replace bootloader or recovery. Still need unlocked booloader.
Because TWRP didn't work in this version of bootloader (0xA048), I cooked "su.img" in a Linux box and used "/data/local/tmp" as bridge (accessible by ADB).
WARNING! I am not responsible for any harm on your phone. When you're not sure if you can do it, leave it!
For use, you need
1) unlocked bootloader.
2) if your bootloader not unlocked, make sure you have copy of your data, because this process will erase your device.
3) install ADB and FASTBOOT on your pc using minimal ADB or Android SDK.
4) install ADB drivers from Motorola or Universal ADB.
5) download provided files.
6) download SuperSU ver. 2.56 from http://forum.xda-developers.com/apps...ellow-t3219344.
Steps:
1) extract files in a folder of your choice (su.img, boot.img).
2) extract Superuser.apk from SuperSU-v2.56-20151030013730.zip from common folder.
3) enable USB debugging on Android.
4) connect your device on pc.
5) open a command prompt in a new folder.
6) type "adb push su.img /data/local/tmp" without quotes.
7) type "adb install Superuser.apk" without quotes.
8) now reboot your device into fastboot mode by typing "adb reboot bootloader".
9) type "fastboot flash boot boot.img" without quotes.
10) type "fastboot reboot" without quotes.
And enjoy!
Now you have a rooted MotoX Style Marshmallow. To apply any OTAs, you only need reflash stock boot.
Click to expand...
Click to collapse
I still think its going to brick but uhwell.
So far so good, I've got it unlocked.
I apologize for my ignorance. I am gonna take it a step at a time.
Doing step one "unlocking" was scary but it went good.
Wish me luck!
[UPDATE]: USE THIS ONLY FOR NOUGAT 7 OR 7.1! THERE IS A DIFFERENT GUIDE FOR ANDROID OREO!
https://forum.xda-developers.com/xperia-x/how-to/root-xperia-x-f5122-android-n-34-2-2-47-t3594502 (Written by YasuHamed, not me!)
If you are not interested in android Oreo, or you want to go back to Nougat, this guide is still valid! [End of Update]
This is a guide for newbies or for people that are simply confused. If you have any questions, you can always ask me, and I will reply. but please make sure you haven't made mistakes and do not ask about things that are already stated here. Let's go!
BEFORE DOING ANYTHING, NOTES
-make sure you have installed ADB : https://forum.xda-developers.com/showthread.php?t=2588979
-make sure ADB can read your phone with the correct drivers installed. If you have trouble with that, read "DRIVERS" section
!It is absolutely necessary to install the drivers correctly!
-Backup your stuff if you have any, you will need to delete everything from the phone
-Enable USB debugging
-Note: some of these instructions apply to Windows OS only!
-Note: links to downloads have been shortcutted as much possible to make it easier for you!
-Find some stock roms here! https://forum.xda-developers.com/xperia-x/how-to/sonyx-f5121-downgrade-8-0-0-to-7-1-1-to-t3754986
(Credit: HEKER510)
-Warning: you will lose your warranty!
-I am not responsible for any damage done to your device.
BACKUP DRM KEYS (OR WORKAROUND)
You may want to unlock your bootloader. If you unlock it without backing up the DRM keys, you will lose them. I did that mistake and I regret it. If you already did, there is an alternative solution, skip to step 8.
1) If you are running android 7 nougat, you will need to downgrade to MM. If you are running MM, skip to step 7.
2) You will need to wipe everything before rolling back, so if you have any data back it up
3) Download any stock MM 6.0.1 firmware for the xperia X. You can find one here : https://mega.nz/#!1xRj2CYS Decryption key: !qBVi7yky8AL84eUF3bpTTGQ2YmN0ePCjc-eSDZGIZCI
Watch out: if you have the dual SIM model, F5122, you need to download accordingly!
For more firmwares, check "BEFORE DOING ANYTHING"
4) Download the latest flashtool: http://www.flashtool.net/downloads.php
Upon installation, tick on fastboot, flashmode drivers! If it didn't ask you, go to the installation folder and run Flashtool-drivers.exe. Please read "DRIVERS" section!
5) Flash the .tft file
How to flash?
0. Go to "C:\Users\[Your PC Name]\.flashTool\firmwares" , and put your firmware .ftf file in there!
1. Open Flashtool and click on the lightning bolt icon (first one from the left)
2. In the prompt, choose flashmode.
3. Under firmware, click on the version you put (It should probably only be one option)
4. Under wipe , tick everything. Under the others, do not make any changes.
5. Click "Flash"
6. When the popup appears, connect your device. It needs to be powered off, and connected while you are holding the
"volume down" button.
7. Wait for it to finish.
8. Done. Boot up the device, it might take some time to open so don't worry.
Click to expand...
Click to collapse
6)If your phone bootloops, try flashing again or a different firmware and make sure you followed the steps correctly.
7) Once your phone successfully boots android MM, use Dirtycow to get your DRM keys out: https://forum.xda-developers.com/crossdevice-dev/sony/universal-dirtycow-based-ta-backup-t3514236
8) If you unlocked the bootloader before backing up your keys, you can use DRM kernel fix. You can get it here: https://forum.xda-developers.com/xperia-x/development/kernel-drm-fix-nougat-t3530849 Before using it check out the custom rom that includes this fix and other things.
UNLOCK BOOTLOADER
This is relatively easy and you can follow official sony instructions to do it.
1) Go to your phone settings, developer options, and enable OEM unlock
"But there is no developer options!" -Go to the bottom of your settings, system, about phone, and tap multile times on "Build Number", also at the bottom.
Click to expand...
Click to collapse
2) If you haven't already , install ADB fastboot and configure drivers (Link on top )
3) Follow the steps on the Sony website to get your unlock code: https://developer.sonymobile.com/unlockbootloader/email-verification/
4) After unlocking, a warning message on boot is normal!
INSTALL RECOVERY
Installing TWRP on your xperia X is very important, since you can flash zips and img files so easily, plus wipe, backup and other features.
1) Download the TWRP .img file: https://androidfilehost.com/?w=files&flid=197369 (Credit: eagleeyetom )
2) Make sure you have USB debugging enabled
3) Open your downloaded twrp folder
4) Run CMD in that folder (shift + right click inside the folder, Open CMD here )
5) Connect your Xperia X to your PC
6) Type these lines:
adb reboot bootloader
fastboot flash recovery recovery.img [where recovery.img is your twrp file name]
fastboot reboot
7) If no errors, twrp is now installed. Once your phone boots , turn it off,. To access TWRP recovery hold power button and volume down button until the TWRP menu appears.
STOCK ROM, ROOT
If you just want to root and not interested in additional features and tweaks, you can simply flash SU through TWRP to get your phone rooted.
Note: Current best stock ROM available: 7.1.1 (252) - better features than older ver, and good battery life.
0) Install your desired stock firmware using the exact same previous instructions, (under DRM section) with flashtool.
1) Download SuperSu
Or magisk, using YasuHamed guide mentioned on top, but I have not tested with anything other than Oreo 8.0
Use magisk if you want more stability / root features (like hide root from apps, modules )
2) copy it anywhere on your phone
3) Run TWRP
4) Tap on install
4) Flash the file
5) Reboot, you are now rooted
6) Insert your DRM keys if you have them
Custom ROMS
After unlocking the bootloader and installing TWRP this is the best way to go in order to get full root, tweaks.
https://forum.xda-developers.com/xperia-x/development/rom-xperia-x-pexorom-v1-0-0-f5122-f5121-t3590552
^ This is a very good custom ROM made by prmk74. You can see its features in his thread.
1) Download the rom and copy it to your phone
2) Run TWRP
note: It is recommended to wipe dalvik, cache, data ( your storage partition doesn't need to be wiped)
3) Tap install, find your downloaded file and execute
note: It is recommended to wipe dalvik, cache, data ( your storage partition doesn't need to be wiped)
4) Follow on-screen instructions, do not stop the booting after finishing the installation, it will take some time
5) Insert your DRM keys if you have them
6) For those who lost their keys: Now the functions like vivid image mode are working properly.
DRIVERS
For Windows 8/8.1/10 users, how to solve driver problems:
1) Press the Windows key + R together and in the ‘Run’ box type: shutdown.exe /r /o /f /t 00
– Now make the following selections to boot into the Start Up Setting Screen: Troubleshoot > Advanced options > Start Up Settings > Restart
– Then, when the machine restarts, select number 7 i.e. “Disable driver signature enforcement”. Your machine will start with Driver signing enforcement disabled until the next reboot.
B) Now you can install the Flashtool drivers. Go to the flashtool install location and run the drivers.exe again, check fastboot and flashmode
– Windows will warn that the driver is not signed and will require you to confirm the installation.
– Once the installation is complete, reboot the machine
TO CONCLUDE:
This is what you may want to do to get the most out of your new xperia x:
1) Backup DRM
2) Unlock BL
3) Install TWRP
4) Flash Persian (or a different rom) through TWRP (And subscribe to the thread so you receive updates)
5) Restore DRM
Notes:
None of the links, tools are of my work, I'm just writing a guide for my fellow XX owners
^^ this guide is so really good :3. I post flash script for someone dont know how to find it ^^
unzip it in this position.
C:\Users\[user-name]\.flashTool\mydevices
max26292 said:
^^ this guide is so really good :3. I post flash script for someone dont know how to find it ^^
unzip it in this position.
C:\Users[user-name]\.flashTool\mydevices
Click to expand...
Click to collapse
Thanks!
Thanks for this, I need some help!
All was fine until I tried flashing the recovery, comes back "partition unknown" error. I was unable to bring the device up under an adb device only as a fastboot device.
34.0.A.1.264_R3A firmware.
Different official sony driver (Sony bootloader guide driver didn't work)
Device now hangs on the Sony logo after boot messgae warning "OEM bootloader unlocked, device not trusted," any help would be appreciated.
brianx87 said:
Thanks for this, I need some help!
All was fine until I tried flashing the recovery, comes back "partition unknown" error. I was unable to bring the device up under an adb device only as a fastboot device.
34.0.A.1.264_R3A firmware.
Different official sony driver (Sony bootloader guide driver didn't work)
Device now hangs on the Sony logo after boot messgae warning "OEM bootloader unlocked, device not trusted," any help would be appreciated.
Click to expand...
Click to collapse
These USB drivers are very annoying to work with. I got mine to finally work using a program called ADB driver installer. http://adbdriver.com/downloads/ Choose automated installation and try what I said. I believe it should fix your problem, after installing the drivers reboot and flash again.
Other than that, I have to ask are you 1000% sure you used the exact commands?
I saw another thread someone mistook
"flash recovery recovery.img" for "flash recovery.img"
"recovery" should be included before the recovery file name
brianx87 said:
Thanks for this, I need some help!
All was fine until I tried flashing the recovery, comes back "partition unknown" error. I was unable to bring the device up under an adb device only as a fastboot device.
34.0.A.1.264_R3A firmware.
Different official sony driver (Sony bootloader guide driver didn't work)
Device now hangs on the Sony logo after boot messgae warning "OEM bootloader unlocked, device not trusted," any help would be appreciated.
Click to expand...
Click to collapse
Why didn't the sony guide work? It worked for me. Just so you know, the "device cant be trusted" message is appearing on everyones' phones after unlocking the bootloader, it's not a problem or something
the part of restoring DRM is skipped,
please xplain
YasuHamed said:
the part of restoring DRM is skipped,
please xplain
Click to expand...
Click to collapse
I know, as I said there is room for improvement. The reason I did not include it is because I never did it myself, so I don't want to write something wrong or something that could lead to problems. I write something only if I am 100% sure. If anyone of you is kind to offer that piece so the guide is complete I will be glad
FoxTheLegend said:
Why didn't the sony guide work? It worked for me. Just so you know, the "device cant be trusted" message is appearing on everyones' phones after unlocking the bootloader, it's not a problem or something
Click to expand...
Click to collapse
Ok I figured out what I did wrong and was able to amend another issue I edited out of this post.
brianx87 said:
Ok I figured outwhat I did wrong (able to boot into the os and warning message no longer an issue ) and the issue I am now facing is that twrp is hanging on the boot screen. Is this version of twrp built to a specific version of android?
Click to expand...
Click to collapse
What do you mean hanging? the twrp logo frozen?
FoxTheLegend said:
What do you mean hanging? the twrp logo frozen?
Click to expand...
Click to collapse
Working now, used a previous version of twrp by mistake. Using latest build works fine now, have to wait to get home from work to proceed with the rest, annoying procedures this stuff but your guide is great.
brianx87 said:
Working now, used a previous version of twrp by mistake. Using latest build works fine now, have to wait to get home from work to proceed with the rest, annoying procedures this stuff but your guide is great.
Click to expand...
Click to collapse
Thanks, Im glad to it works now
FoxTheLegend said:
I know, as I said there is room for improvement. The reason I did not include it is because I never did it myself, so I don't want to write something wrong or something that could lead to problems. I write something only if I am 100% sure. If anyone of you is kind to offer that piece so the guide is complete I will be glad
Click to expand...
Click to collapse
thank you for the answer sir
i am unable to find any twrp that work for my F5122, it always bricks and i have to reset.
is there any twrp recovery image that works correctly with f5122?
YasuHamed said:
thank you for the answer sir
i am unable to find any twrp that work for my F5122, it always bricks and i have to reset.
is there any twrp recovery image that works correctly with f5122?
Click to expand...
Click to collapse
Hmm.. Did you try the one from the poison thread? I myself have still the old version installed (not 3 or 3.1) if I find it on my pc I will share it with you
FoxTheLegend said:
Hmm.. Did you try the one from the poison thread? I myself have still the old version installed (not 3 or 3.1) if I find it on my pc I will share it with you
Click to expand...
Click to collapse
I have to modified kernel
all i want is to boot it via fastboot command
for example i have the rooted kernel SU installed (but battery drain is high) so i what wana do is flashing kernel with all securities OFF and then with twrp image i will do
Code:
fastboot boot twrp.img
i will boot the X in to twrp and i will flash SUPERSU via twrp.
thanks all
YasuHamed said:
I have to modified kernel
all i want is to boot it via fastboot command
for example i have the rooted kernel SU installed (but battery drain is high) so i what wana do is flashing kernel with all securities OFF and then with twrp image i will do
i will boot the X in to twrp and i will flash SUPERSU via twrp.
thanks all
Click to expand...
Click to collapse
I see, but don't you want to figure out why it's not working normally? Noone has reported a similar problem
FoxTheLegend said:
I see, but don't you want to figure out why it's not working normally? Noone has reported a similar problem
Click to expand...
Click to collapse
since there is no offcial twrp for X out yes and only DORA (XA) is available) even XA don't work for X
so either twrp 2.8, 3.0 or 3.1 any should just boot in order to let us flash superSU.
YasuHamed said:
since there is no offcial twrp for X out yes and only DORA (XA) is available) even XA don't work for X
so either twrp 2.8, 3.0 or 3.1 any should just boot in order to let us flash superSU.
Click to expand...
Click to collapse
=-= try to use this command fastboot flash recovery [your_recovery_name].img
I use f5122 and flash successfull twrp 3.0.2 and 3.1. with this, i flash some kernel and rom without any problem.
Everything is working good for me now, the only issue now is restoring the DRM keys, has anyone found a credible source for doing this on this device?
How can I be sure I have a full root? I can't seem to be able to uninstall some of the bloatware only disable it!
brianx87 said:
Everything is working good for me now, the only issue now is restoring the DRM keys, has anyone found a credible source for doing this on this device?
How can I be sure I have a full root? I can't seem to be able to uninstall some of the bloatware only disable it!
Click to expand...
Click to collapse
Well titanium backup can assure you but I don't see why you wouldn't have full root... You need an app uninstaller to uninstall bloatware, it can't be done through the settings you know that right
RADev Team Presents:
Bootloader Unlock Tool for Meizu m3 Note M91 (TESTED) (WORKING)
Warning:- This tutorial is only for M3 Note (M91). Do not try it on Meizu m3 note (L91)
If you still want to try it, you're on your own as although the developer claims that it is working on Meizu m3 note (L91) it hasn't been tested
Backup all your personal data, contacts, everything to your PC/laptop as all your personal data will be lost after following this tutorial
I am not responsible for bootlooping, hard bricked, soft bricked devices, however, i will try my best to help you out of it and our team will release a hard brick fixing tool for Meizu m3 note (M91) soon. (Links will be posted here)
After you perform these steps, your phone will not have a firmware installed. You will have to manually install the firmware again.
Requirements:-
1. A mildly functioning brain
2. Ability to follow specific instructions
3. Root
4. A Meizu m3 note
5. Unlocker tool
6. A PC/laptop with ADB installed
Steps:
1. Upgrade to 6.7.9.12 daily WITH CLEAR DATA TICKED, other versions have not been tried or tested by me, I was successful in unlocking the bootloader by testing the apk on this firmware.
Link for 6.7.9.12 daily firmware:- https://download.meizu.com/Firmware.../cn_daily/20170912000320/3d65e1ba/update.zip
2. Install ADB on your system (Follow this link if you don't know the steps):- https://forum.xda-developers.com/showthread.php?t=2588979
3. Login to your Meizu account on your phone then go to Settings>Fingerprint & Security>Root Permission and enter Meizu account password. Phone will reboot and root itself.
4. Download the unlocker.apk from here and install it on the phone:- https://drive.google.com/open?id=0By0YAAxheuSKaDJ1YXJKYUJSVkk
5. Open unlocker app and grant it root permission. Click on unlock and wait till it shows unlock success and #END in the last and 2nd last line
Tip:-You can also follow the original developers on QQ (They are great guys and allowed our team to mirror, modify and post the unlock tool without wanting anything in return)
6. Now turn off the device and boot into Fastboot mode by pressing Volume Up + Power button at the same time. You will see a small dialog in the bottom corner of the phone saying 'Fastboot Mode..."
7. Connect your phone to PC, open command prompt on Windows or terminal in Linux and type
Code:
fastboot devices
. If the device ID is shown then it means that your phone is ready for flashing. If not, try installing ADB Drivers again.
8. After the device is detected in fastboot mode, type
Code:
fastboot oem unlock
Do not panic if it doesn't unlock in the first try. Keep trying. It took me a while to get it unlocked. Follow the steps on the phone when you type fastboot unlock. IT will prompt you to either press the volume up or volume down button to confirm the execution of the command you've given.
9. After the bootloader unlock is successful, power off your device.
10. Restarting the device will show you that there is no firmware installed on the phone, will wait for 5 seconds and then boot into TWRP.
11. This happened because the tool we used earlier to unlock the phone installed TWRP while unlocking the device.
12. The TWRP is quite buggy and cannot mount data and system partitions as it was ported a long time ago. To fix this, go to Wipe>Advanced Wipe in TWRP and format every partition.
13. If that doesn't work then repair file system in twrp of every partition you can. After this you'll be good to go.
If you face any difficulty following any of the steps mentioned here please join our Chatbox and Channel on Telegram so that our 1000+ members can help you out
Channel:- https://t.me/RADevTeam
ChatBox:- https://t.me/FlymeChatBox
Other useful links:-
Hard Brick Fix Tool for Meizu m3 Note:- https://forum.xda-developers.com/android/development/developer-verified-meizu-m3-note-hard-t3682743
We will also be posting a new TWRP, hard brick fixing tool and a new custom ROM for the phone. Please support us
Our work is and always will be 100% free of charge. Being a developer is not easy and requires a lot of time and resources. If you like our job PLEASE CONSIDER DONATING.Donation Link:- http://radevdonate.blogspot.com
So, congratulations! Your bootloader has been unlocked. You're free to do anything you want on your Meizu device
Thanks RADev Team
Excellent post thank you =) :fingers-crossed:
Thank you very much :highfive:
Thanks very much.
And wait for your Los ROM :highfive:
#need help
I am stuck at
check ok
###END
phantom rippers said:
I am stuck at
check ok
###END
Click to expand...
Click to collapse
me too
I successfully installed TWRP, but i can't install any firmware. I always have an error 7. Help me please.
daniil_min said:
I successfully installed TWRP, but i can't install any firmware. I always have an error 7. Help me please.
Click to expand...
Click to collapse
Hey use the twrp by sxrhd. That works flawlessly
Unlock boot loader please
Flyme 7 will not be releasing for meizu m3 note( l91) please unlock bootloader
HI there! Is there a way to upgrade current android version 5.1 on meizu m3 note l681h to a newest android version? Why nobody doest try it? Or tried and failed? Can't find any info about it. I don't want flyme 7 etc, i want upgraded android for install Gcam on this meizu.
"We will also be posting a new TWRP, hard brick fixing tool and a new custom ROM for the phone. Please support us."------I want to know how can I get the new TWRP and the new custom ROM.I'd appreciate very much if you could help me.
I've spent a few hours searching these forums to learn as much as I can about rooting the OEM variant of the BLU R1 HD smart phone and have come across a handful of guides:
Blu R1 HD Unlock bootloader, install TWRP, and root (Non prime) by lil chickenz
For NONE prime R1HD by mrmazak
[TWRP] How to root ("newbie friendly"!) : by bibikalka
Amazon Blu R1 HD TWRP Recovery and Root Tutorial (https://www.youtube.com/watch?v=KMobKWfZbJg)
I found those guides very helpful but there were spots where the guides glossed over a few things that a new member, like myself, found vague and mysterious. Therefore, for my own personal use, I opted to compile a more thorough list of directions that I can follow when I root my device.
With all that said, as more experienced members, would any of you double check the steps and provide clarification when needed?
Thanks in advance!
(See my next post for my list of directions.)
Disclaimer: This list of instructions is my attempt to comprehend information from a variety of sources on how to root the R1 HD OEM Variant. I'm nearly positive that I'm doing something wrong or another. If I am, and you know the right way, please explain it to me! Thank you!
[SIZE="+2"]Required Software, Drivers, & Files[/SIZE]
MediaTek SP Drivers (https://androidfilehost.com/?w=files&flid=68715) | Install these drivers onto your Windows PC so that you can utilize the SP Flash Tool.
SP Flash Tool (https://androidmtk.com/smart-phone-flash-tool) | Install this application via Windows so that I can backup the ROM, including the partitions, of the unmodified smart phone.
ADB (https://forum.xda-developers.com/showthread.php?t=2588979) | Install this application and drivers using Windows in order to unlock the bootloader and flash the TWRP so that I might root the device.
SuperSu (https://download.chainfire.eu/1113/SuperSU/UPDATE-SuperSU-v2.82-20170528234214.zip) | This file needs to be uploaded / downloaded to the smart phone's internal storage aka /sdcard (internal storage). Eventually it will be installed to root the phone.
TWRP Scatter R1 Prime (https://www.mediafire.com/folder/usifl1vdnma1t/BLU_R1_HD) | This file is needed to flash the TWRP onto the smart phone.
[SIZE="+2"]Preliminary[/SIZE]
Ensure that the required software, drivers, and files are installed and placed appropriately.
Power on your smart phone, navigate to Settings -> About then scroll down to and tap Build Number multiple times until you are granted Developer Access.
Enter Developer Settings then enable USB Debugging as well as OEM Unlock.
Power off your smartphone (The battery must be removed to backup the ROM later. Should I remove it now?) then connect it to your computer with the mini-USB to USB cable.
[SIZE="+2"]Enter Bootloader[/SIZE]
On Windows, navigate to the ADB installation directory (Usually C:\adb) then double click on Runme.bat.
When in the shell and prompted type the following case sensitive code to put your smartphone into its bootloader:
Code:
adb reboot bootloader
[SIZE="+2"]Unlock Bootloader & Factory Reset[/SIZE]
Wait until your phone is in the bootloader (The smartphone will display text along the lines of "fastboot...") then, on Windows, type the following case sensitive code to unlock the bootloader and factory reset your smartphone:
Code:
fastboot oem unlock
[SIZE="+2"]Backup ROM[/SIZE]
Now that the bootloader is unlocked, on Windows, open your web browser then naviate to the following guide:
ROM Backup using SP Flash Tool 'Readback' feature by codelover
Follow the directions listed to Backup your ROM replacing 'Honor3C' with 'R1 HD,' and 'MT6582_Android_scatter.txt' with 'MT6735_Android_scatter.txt (Is this accurate?).'
Follow the directions to Process the dumped ROM files to create the SPFT Flashable files.
[SIZE="+2"]Flash TWRP Custom Recovery[/SIZE]
On Windows, extract the TWRP Scatter Prime zipped file into the ADB installation folder (Usually C:\adb).
Flash the custom TWRP by typing the following case sensitive code:
Code:
fastboot flash recovery recovery.img
[SIZE="+2"]Root[/SIZE]
Now that the TWRP is flashed onto your smart phone you may enter into its Recovery mode by pressing the 'Power' and 'Volume Increase' buttons for more than a few seconds. You may have to disconnect the smart phone from the PC first.
Navigate to the Recovery by using the volume button to highlight an option and the power button to select it.
Mount the system partition as read only then backup the partitions (select everything) to the specified storage location (including a SD card).
4. Install the SuperSu from the zipped file that you uploaded to your smart phone's internal storage in the Software, Drivers & Files section (After I wrote this I realized that the file may have been deleted when the phone was factory reset. Reconnect the phone back to the PC and you're able to access the internal and external storage from the PC. Drag the file into internal storage now.)
[SIZE="+2"]Optional[/SIZE]
In order to use apps like ES File Explorer, apps that aren't yet updated to handle system-less root, enter the following case sensitive code (Where am I entering this code? On the smart phone? On the PC using the ADB?):
Code:
adb shell
su
mount -o remount,rw /system
mount -o remount,rw /
touch /sbin/su /system/bin/su /system/xbin/su
mount -o remount,ro /system
mount -o remount,ro /
Thanks again for taking the time to review this process and make any clarifications!
Wait! The MOST important thing is checking what version of the ROM you are currently running. If you have updated your phone with an official ROM to version 8.0 or greater (I think that's the version), then you will NOT be able to run SPFT and replace the bootloader as Blu disabled SPFT in the updated ROM. So the most important first step is to find out what ROM you have installed and whether SPFT will even work. If not, you will not be able to replace the bootloader or root.
I am not sure what the equivalent version of the non-Amazon ROM is where they disabled SPFT. Maybe V17?
yaconsult said:
Wait! The MOST important thing is checking what version of the ROM you are currently running. If you have updated your phone with an official ROM to version 8.0 or greater (I think that's the version), then you will NOT be able to run SPFT and replace the bootloader as Blu disabled SPFT in the updated ROM. So the most important first step is to find out what ROM you have installed and whether SPFT will even work. If not, you will not be able to replace the bootloader or root.
I am not sure what the equivalent version of the non-Amazon ROM is where they disabled SPFT. Maybe V17?
Click to expand...
Click to collapse
Thanks for the response, yaconsult. Here's the specs:
Android Version | 6.0
Baseband Version | MOLY.LR9.W1444.MD.LWTG.MP.V79.971
Kernal Version | 3.18.19+
Build Number | MRA58K
Custom Build Version | BLU_R0011UU_V21_GENERIC
BLUper said:
Thanks for the response, yaconsult. Here's the specs:
Android Version | 6.0
Baseband Version | MOLY.LR9.W1444.MD.LWTG.MP.V79.971
Kernal Version | 3.18.19+
Build Number | MRA58K
Custom Build Version | BLU_R0011UU_V21_GENERIC
Click to expand...
Click to collapse
Having your build number as V21, I am affraid you are stuck, without possiblity to unlock bootloader, so no flashing custom recovery with fastboot mode. Or modified root enabled boot.img
Also with build #V21, no possible method to connect with spft to flash custom recovery. Or modified root enabled boot.img.
With these restrictions, all the past information you have gathered will do you no good. Sorry. BLU has locked you down
mrmazak said:
Having your build number as V21, I am affraid you are stuck, without possiblity to unlock bootloader, so no flashing custom recovery with fastboot mode. Or modified root enabled boot.img
Also with build #V21, no possible method to connect with spft to flash custom recovery. Or modified root enabled boot.img.
With these restrictions, all the past information you have gathered will do you no good. Sorry. BLU has locked you down
Click to expand...
Click to collapse
Thanks for your hasty response, MrMazak. The information that I gathered isn't too complete a loss - I was able to learn more about and have a greater understanding of the root process.
Is there a part of the XDA forums where I might ask around, or dig through, to find smart phones in the $100 USD range that are still root-able?
BLUper said:
Thanks for your hasty response, MrMazak. The information that I gathered isn't too complete a loss - I was able to learn more about and have a greater understanding of the root process.
Is there a part of the XDA forums where I might ask around, or dig through, to find smart phones in the $100 USD range that are still root-able?
Click to expand...
Click to collapse
Not specific page or thread, but a general search of the full forum would be a good start
So I'm confused, these BLU phones or which phones or all phones cannot be rooted any more? I have the BLU R1 PLUS and it doesn't even have a Developer option for unlocking the firmware ( BLU_R0051UU_V13_GENERIC 14-03-2017 10:40). Of course I cant run an oem unlock either.
How does anyone reload an image onto them if they can't be rooted? Thanks!
Donphillipe said:
So I'm confused, these BLU phones or which phones or all phones cannot be rooted any more? I have the BLU R1 PLUS and it doesn't even have a Developer option for unlocking the firmware ( BLU_R0051UU_V13_GENERIC 14-03-2017 10:40). Of course I cant run an oem unlock either.
How does anyone reload an image onto them if they can't be rooted? Thanks!
Click to expand...
Click to collapse
your device is different than the R1-HD
the plus (afaik) is not able to be unlocked, means no twrp, and probably no root.
I had this same device in hand for 3 weeks, and could not get anywhere with root.
maybe someone else has had more luck.
this is another thread that i respnded to for the device too.
https://forum.xda-developers.com/r1-hd/help/rooting-r0051uu-t3795795