I am on stock firmware (no root) and updated to Android 11 Yesterday. Now every app needs 5 seconds to open and the whole phone is laggy as hell. Reboot didn't help. I tried getting into recovery to clear cache but that's not possible.
I shut down the phone and then boot with vol up + bixby + power but it just boots normal then. When entering my pin I get this message:
[PDP]
backup: fail
setup wizard [finish]
What's happening here?
Connect your S10 on a computer with a usb cable then you can come into recovery with the buttons.
I have no issues with android 11. I do make a factory reset every time a switch to another android
gerthallink said:
Connect your S10 on a computer with a usb cable then you can come into recovery with the buttons.
I have no issues with android 11. I do make a factory reset every time a switch to another android
Click to expand...
Click to collapse
Since there is still no backup program (non root!) which saves the settings and data of each app (not only the app itself) I won't make a factory reset. It would take me weeks to configure every app again.
I will try the USB thing in a minute
Related
I know that there are loads of threads on XDA regarding bricked G2s (and how to fix them), and believe me, I have scoured every one I could find. None of them had the same situation as me. Here it is:
- tried upgrading rooted G2 (d802) to KitKat through PC suite
- on reboot, phone gives repeated "Unfortunately, com.android.systemui has stopped" messages
- this prevents me from doing anything - cannot start developer tools/USB debugging; cannot software factory reset; may as well have a broken screen
- tried booting into recovery - there seems to be no recovery
- I have booted into recovery before the update; I tried using the same method - nothing
- I googled for alternate methods, none of them worked either
- has download mode - what does this enable me to do?
- tried using a 'restore to stock' flashing tutorial on XDA - didn't work
- it is here if anyone was curious
- cannot access through ADB
- TWRP gone
- have no idea how to access through fastboot
Any other options available? Is there any other way to enable USB debugging, trigger fastboot, access the phone through ADB, or factory reset it?
rtswan1211 said:
I know that there are loads of threads on XDA regarding bricked G2s (and how to fix them), and believe me, I have scoured every one I could find. None of them had the same situation as me. Here it is:
- tried upgrading rooted G2 (d802) to KitKat through PC suite
- on reboot, phone gives repeated "Unfortunately, com.android.systemui has stopped" messages
- this prevents me from doing anything - cannot start developer tools/USB debugging; cannot software factory reset; may as well have a broken screen
- tried booting into recovery - there seems to be no recovery
- I have booted into recovery before the update; I tried using the same method - nothing
- I googled for alternate methods, none of them worked either
- has download mode - what does this enable me to do?
- tried using a 'restore to stock' flashing tutorial on XDA - didn't work
- it is here if anyone was curious
- cannot access through ADB
- TWRP gone
- have no idea how to access through fastboot
Any other options available? Is there any other way to enable USB debugging, trigger fastboot, access the phone through ADB, or factory reset it?
Click to expand...
Click to collapse
ok well first entering factory reset(or custom recovery)
-before d80220d the key combination to enter factory reset is with phone fully powered off hold volume down+power and when lg logo pops up let go and hold volume down+power
-after d80220d(or any update that includes knock code) the combination was changed(pretty sure it had to do with the fact that on kitkat we used stock recovery to install root and everyone who couldn't get in via adb just had to use button combination which everyone knew) and the new combination with phone fully powered off is to hold volume down+power and when lg logo pops up let go and hold onto volume up+down don't touch power, if you have tried these then you should mention it
XxZombiePikachu said:
ok well first entering factory reset(or custom recovery)
-before d80220d the key combination to enter factory reset is with phone fully powered off hold volume down+power and when lg logo pops up let go and hold volume down+power
-after d80220d(or any update that includes knock code) the combination was changed(pretty sure it had to do with the fact that on kitkat we used stock recovery to install root and everyone who couldn't get in via adb just had to use button combination which everyone knew) and the new combination with phone fully powered off is to hold volume down+power and when lg logo pops up let go and hold onto volume up+down don't touch power, if you have tried these then you should mention it
Click to expand...
Click to collapse
You are an absolutely beautiful person. I think I have fallen in love with you. THANK YOU SOOOO MUCH! I swear I found at least 5 different tutorials and none mentioned this.
If your name doesn't go down in history, the world is cruel and unjust.
Sorry. But thanks. SO MUCH.
Im facing the same problem, wanted to go back stock and had CloudFlexy 2.3 installed. Did the firmware flashing, got stuck with procesesses stopping and couldn't boot into factory reset.
Found this thread and got to factory reset, tried factory reset but now my phone only has android figure with spinning thingy inside of it going on in my screen. ADB wont recognize the phone.. I think i need to flash stock rom or something but not sure how to. Please help, how did you proceed rtswan1211 after getting the factory reset screen?
Edit:
After waiting for 'bout 10mins for something to happen i just tried to reboot the phone and still the same spinning android logo came on. Finally plugged in the USB cable and phone booted up with working software. Had me really worried.
bakufu said:
Im facing the same problem, wanted to go back stock and had CloudFlexy 2.3 installed. Did the firmware flashing, got stuck with procesesses stopping and couldn't boot into factory reset.
Found this thread and got to factory reset, tried factory reset but now my phone only has android figure with spinning thingy inside of it going on in my screen. ADB wont recognize the phone.. I think i need to flash stock rom or something but not sure how to. Please help, how did you proceed rtswan1211 after getting the factory reset screen?
Edit:
After waiting for 'bout 10mins for something to happen i just tried to reboot the phone and still the same spinning android logo came on. Finally plugged in the USB cable and phone booted up with working software. Had me really worried.
Click to expand...
Click to collapse
after tried several times, FACTORY RESET successfully done.
Previously, I updated the 20G through custom recovery and forgot to wipe clean. After completely installed the 20G, error shows blocking the screen and the custom recovery was gone. after several attempted, I succesfully done by:
- turn off the phone completely
- press vol down and power
- release immediately, upon LG logo pop up, and
- press vol up and vol down
- Factory reset menu pop up
Seems now is harder than before, I need couple times to try before succeed
Hi,
I thought I could enter the Hidden Menu and change the Fast Dormancy setting into disabled, so I did it and wanted to reboot my phone. The phone turned off, and was doing its boot up procedure, while it started behaving abnormally. The LG logo popped up for about 5 seconds (so it didn't leave the bootloader), turned off for 10 seconds and then again the whole process repeated. I thought that was a bootloop, so I turned it off, entered Factory Reset menu, chose appropriate options and waited for the reset, but the phone didn't perform the action. Then I tried to get into download mode, but to no avail - the phone kept going with bootloop. I'm still struggling to do this; the only menu I could get into was the Factory Reset one.
Could anyone help me get my phone back into function?
D802, 20G stock
Thanks in advance!
That's weird. I always disable fast dormancy after a reset or a new rom flash and I've never had any issues.
What comes instead of download mode? If nothing, Are you sure you're doing it correctly?
Press and hold the power button for 10-15 seconds.
Plug the phone into the cable, then press and hold volume up and plug the cable into the computer. That should trigger download mode.
Thank you for your help.
I know that's weird, I've entered Download mode numerous times using the combination that you provided and can't do it this time. The strangest thing actually is that the factory reset menu does show up (though it does nothing), while Download mode does not - it seems to be actually unaffected by using the combination and is still stuck in a bootloop. I have no idea what steps should I take in order to recover my phone.
I forgot to mention that the phone wasn't even rooted then, which makes it even more mysterious...
Ouch! Well what comes up when you enter download mode? Fastboot? Black screen?
If you're still covered by warranty take it for a replacement. I doubt fast dormancy alone has messed up your device. If it truly has, then try booting the phone without a sim card.
Normally when I insert the USB cable with vol up button pressed, the LG logo shows up, then the notification of Download mode and finally the Software Update screen. But this time, only the LG logo shows for about 5 seconds, as if I normally booted it using Power button and does not get me into neither Download nor Fastboot mode.
Well, I took a look at other options in this hidden menu, but still, could it brick that hard even then?
I doubt whether I'm still eligible for a replacement, as the device had been rooted already (though it's not at the moment). The whole process also takes quite a lot of time, which is why I wanted to avoid it. Is there any method to bring it back to life?
I wanted to revive my phone using the method linked with flashing the whole partitions onto my phone, but Ubuntu didn't even notice that any drive was connected...
Am I doing something wrong? I mean e.g. is the combo Vol Up + cable still the same in D80220G? Is there any other way of accessing the phone through my computer? Can I somehow stop this bootloop from continuously happening? Doesn't the fact that I can get into Factory Reset menu help in any way?
Thanks for your help in adavnce!
I have a Nexus 4. While trying to update to lollipop, my cellphone crashed and its stuck in bootloop animation. I have a lot a photos and contacts that i don't want to loose, the rest i don't really mind (If it's possible to save the rest, i'll save it). The thing is i don't have any backup. USB debugging and dev. are disabled. My question: "Is there a way of manually enable USB debugging via terminal or cmd?" I have a pc and a mac and i have SDK tools.
Glitcherman said:
I have a Nexus 4. While trying to update to lollipop, my cellphone crashed and its stuck in bootloop animation. I have a lot a photos and contacts that i don't want to loose, the rest i don't really mind (If it's possible to save the rest, i'll save it). The thing is i don't have any backup. USB debugging and dev. are disabled. My question: "Is there a way of manually enable USB debugging via terminal or cmd?" I have a pc and a mac and i have SDK tools.
Click to expand...
Click to collapse
i think i could would enabling it in dev options but im not sure jt make sure you have the lg nexus 4 adb drivers installed boot into bootloader and type the command "fastboot devices" to see if its recognized (again im not sure.) http://forum.xda-developers.com/nexus-4/general/drivers-nexus-4-driver-windows-t1992345
you could try and flash factory image and to not lose data try this.... http://forum.xda-developers.com/showpost.php?p=56916654&postcount=3344
Glitcherman said:
I have a Nexus 4. While trying to update to lollipop, my cellphone crashed and its stuck in bootloop animation. I have a lot a photos and contacts that i don't want to loose, the rest i don't really mind (If it's possible to save the rest, i'll save it). The thing is i don't have any backup. USB debugging and dev. are disabled. My question: "Is there a way of manually enable USB debugging via terminal or cmd?" I have a pc and a mac and i have SDK tools.
Click to expand...
Click to collapse
Power phone off, hold Vol Down + Pwr, you will boot to stock recovery (supine android with an exclamation point sign over it), press Vol Up + Power, from the resulting menu, wipe the /cache partition, and then reboot. Your device will be out of bootloop and boot properly. Give it a few minutes.
ariesgodofwar said:
Power phone off, hold Vol Down + Pwr, you will boot to stock recovery (supine android with an exclamation point sign over it), press Vol Up + Power, from the resulting menu, wipe the /cache partition, and then reboot. Your device will be out of bootloop and boot properly. Give it a few minutes.
Click to expand...
Click to collapse
Already did that, nothing much happens. :|
Hello to all here at xda im a new member and im hoping someone can help me,
I recently bought a yotaphone 2 from tinydeals in china and its model
P05-Yota which I think is china model YD-205 or 206
I wanted to upgrade the firmware to the latest firmware and I think I made two big mistakes.
First when I downloaded the yotaflasher software for windows I chose the eu firmware on option 2 and clicked to download it.also I dont think I put usb debugging on my phone.i put my phone into diwnloading mode and connected the phone to my pc.my pc recognised the phone and I clicked on option 1 in yotaflasher to flash mobile.
The flash process started but failed on most of the things it was supposes to get access to, my phone reatarted and now its on constant boot loop which shows the android logo.i can boot phone back into downloading mode but nothink else
I have read that as my phone is in boot loop and can still boot into downloading mode its soft bricked and not hard bricked so im guessing thats good news.
This is my own fault and im not very experienced in all this flashing and I fing yotaflasher hard to understand compared to odin ive used on samsung phones before
Please can anyone help a complete novice to revive his mobile
I would be greatful for any help and instructions and dont know if im allowed to do this on this site so I appologise to moderators if im not, but anyone that can help me get my phone working again I will transfer £20 to their paypal account as I would appreciate this help alot
Im sorry for being a noob and hope to hear from someone soon
Thx
Simon h
Sorry for my very, very bad english.
Try to reboot your phone in recovery mode.
Press power button for a long time (20 - 30 seconds or more) and, as soon as the screen turn off, press and hold the Volume Up + Power button simultaneously for about 10 seconds. Then, choose wipe data and factory reset.
Try several times if that does not work at once.
I made a big mistaske too and I solved the problem but with several attemps.
Good luck !
I appreciate your help
cheynei said:
Sorry for my very, very bad english.
Try to reboot your phone in recovery mode.
Press power button for a long time (20 - 30 seconds or more) and, as soon as the screen turn off, press and hold the Volume Up + Power button simultaneously for about 10 seconds. Then, choose wipe data and factory reset.
Try several times if that does not work at once.
I made a big mistaske too and I solved the problem but with several attemps.
y
Good luck !
Click to expand...
Click to collapse
Just wanted to saythanykyou and appreciate your reply and as soon as I get home I will try and boot into recovery and see how that goes.will update on progress
Again thankyou
simon121simon said:
Just wanted to saythanykyou and appreciate your reply and as soon as I get home I will try and boot into recovery and see how that goes.will update on progress
Again thankyou
Click to expand...
Click to collapse
No problem, I think it's the only solution... but you will loose all your data (I bought my yotaphone from tinydeals too and I killed it too)...
:fingers-crossed:
queation about yotaflasher
cheynei said:
No problem, I think it's the only solution... but you will loose all your data (I aboutbought my yotaphone from tinydeals too and I killed it too)...
:fingers-crossed:
Click to expand...
Click to collapse
Just a quick question, yotaflasher is a software im not familiar with and im not sure if im using it right.
Do I start yotaflasher and then type 2 and enter tochoose region.then type the number for the firmware I want and press enter.then when its finished downloading it seems ro freeze and I cant type any key to start flash so I have to exit software then restart it.
Do I then just type 1 and enter to start flashing phone then thats it or do you have to type proper commands into this software ro get it to work as im not sure if im using it right
I will be home in couple of hrs to test out what you told me
Thx
simon121simon said:
Just a quick question, yotaflasher is a software im not familiar with and im not sure if im using it right.
Do I start yotaflasher and then type 2 and enter tochoose region.then type the number for the firmware I want and press enter.then when its finished downloading it seems ro freeze and I cant type any key to start flash so I have to exit software then restart it.
Do I then just type 1 and enter to start flashing phone then thats it or do you have to type proper commands into this software ro get it to work as im not sure if im using it right
I will be home in couple of hrs to test out what you told me
Thx
Click to expand...
Click to collapse
Sorry again for my english...
1. without any software, reset your phone : turn off your phone (or, if it's not possible, press power button for a long time :20 - 30 seconds or more - and, as soon as the screen turn off) --> press and hold the Volume Up + Power button simultaneously for about 10 seconds. Then, choose "wipe data and factory reset" and wait...
2. After the reboot, put usb debugging on your phone
3 . install yotaflasher (so you also have the drivers on your computer).
4. put your phone on download mode : turn off your phone - then, press and hold the Volume down + Power button simultaneously for about 10 seconds
5. open yotaflasher on your computer and connect your phone (wich is on download mode)
6. chose the last EU firmware (option 2) and download it - after, click on option 1 and flash your mobile. Wait the necessary time without touch anything and, after maybe 10 ou 15 minutes, your phone will reboot.
We have the same phone from Tinydeals and I'm now on lolipop (after the flash).
Good luck !
usb debugging is the problem
cheynei said:
Sorry again for my english...
1. without any software, reset your phone : turn off your phone (or, if it's not possible, press power button for a long time :20 - 30 seconds or more - and, as soon as the screen turn off) --> press and hold the Volume Up + Power button simultaneously for about 10 seconds. Then, choose "wipe data and factory reset" and wait...
2. After the reboot, put usb debugging on your phone
3 . install yotaflasher (so you also have the drivers on your computer).
4. put your phone on download mode : turn off your phone - then, press and hold the Volume down + Power button simultaneously for about 10 seconds
5. open yotaflasher on your computer and connect your phone (wich is on download mode)
6. chose the last EU firmware (option 2) and download it - after, click on option 1 and flash your mobile. Wait the necessary time without touch anything and, after maybe 10 ou 15 minutes, your phone will reboot.
We have the same phone from Tinydeals and I'm now on lolipop (after the flash).
Good luck !
Click to expand...
Click to collapse
Hi there mate thx for the step by step guide but I think I know what the problem is.i originally didnt put it into usb debugging mode when I originally tried to flash the firmware.now as the mobile is stuck in boot loop and cant load up as normal I cant switch on usb debugging.is there a way through fastboot or that adb program.im just learning about these programs to flash mobiles with but if there is no way to enable usb debugging through any software I fear im screwed
simon121simon said:
Hi there mate thx for the step by step guide but I think I know what the problem is.i originally didnt put it into usb debugging mode when I originally tried to flash the firmware.now as the mobile is stuck in boot loop and cant load up as normal I cant switch on usb debugging.is there a way through fastboot or that adb program.im just learning about these programs to flash mobiles with but if there is no way to enable usb debugging through any software I fear im screwed
Click to expand...
Click to collapse
Yes, I know, don't worry, I bug my phone too - it's why you have, first, to reset your phone... try to put it on recovery mode, it's the only solution (I think).
--> Press the power button for a long time (20 - 30 seconds or more) and, as soon as the screen turn off, press and hold the Volume Up + Power button simultaneously for about 10 seconds. Then, you will see a menu : choose "wipe data and factory reset".
Try several times if that does not work at once.
I have noticed since i have updated today, if i turn my phone off and press, power, bixby and power up at the same time my phone just starts normal and doesn't go into recovery mode.
That happening to anyone else?
James
Yes, this has also happened to me. No idea how to sort this out this out so I can't wipe my phone's cache.
James
You can, you must the phone connected to the computer with a USB cable.
Then you can come into recovery with the buttons.
OK, thanks. That sorted it.
you can also use usb-c headphones if you have no access to pc