If you are on N986U or N986U1 and want better signal, I would recommend you to flash the phone to CTL4 TMO firmware and get the CP file which is the modem file and flash it to your phone. The modem is compatible with both versions of the phone and gives me about 10db more signal receiving. This is a Android 11 R modem but works also on Android 10.
Hope someone can mod this modem and make it even better.
Let me know how it works out for you and be sure to let me know if you found a better modem CP zip.
Cheers!
I run ATK1 U1 ATK1 U1 CTL4 U1 BTK3 U firmware. Its pretty good for me. Rooted also.
Related
As the titles says, I need the latest BL and Modem (or a link on where to get it) as I am going to install "OnTheEdge" 6.0 Beta 2 to try it out however I can't figure out how to download the BL and Modem for my specific variation and from my understanding due to canada the W8 is not compatible with the F international variation.
*Edit* - I should note I have already looked at "https://www.sammobile.com/firmwares/database/SM-G935W8/RWC/" however that only has for 6.0.1, I need the 7.0.0 correct?
*Edit 2* - Lets say I do just download the latest 6.0.1, its a large file from SamMobile, how do I get the BL and Modem flash from this?
Uploading... give me a moment
APK3 (from 6.0.1. No 7.0 CP/BL available yet for the W8 variant, but no problem with the 6.0.1 ones)
Bootloader https://drive.google.com/open?id=0B7NTwhbole31b0xHMjNOZFJ2MVU
Modem https://drive.google.com/open?id=0B7NTwhbole31MTFBNEh5Zi1LNzg
Thank you very much for the quick reply and for the uploaded files as well!
May I ask what you did to get those files (trying to learn all this stuff as I find the world of a rooted phone an awesome one but there is much to learn!) ?
thexcodec said:
Thank you very much for the quick reply and for the uploaded files as well!
May I ask what you did to get those files (trying to learn all this stuff as I find the world of a rooted phone an awesome one but there is much to learn!) ?
Click to expand...
Click to collapse
I extracted the BL/modem from the full Generic APK3 firmware I found here a few weeks ago. I wanted the latest available modem/BL for my W8 S7 edge too, but I didn't want to subscribe to SamMobile just for that. I suggest you to keep that link, it has many up-to-date files and firmwares available for our S7 edge variant.
Having them separately is more convenient than having to download the full firmware (2GB+) though but well...
Hello
Need your help. Rooted and running lineage 15 os.
I need the latest baseband modem file for my 727. I guess I have mpss.th.2.0.c1.9.1-00010.
Also easiest way to back up my imei or efs?
Please guide me it's my first time i need to update as I'm having mobile connectivity issues. Thanks
Chattersking said:
Hello
Need your help. Rooted and running lineage 15 os.
I need the latest baseband modem file for my 727. I guess I have mpss.th.2.0.c1.9.1-00010.
Also easiest way to back up my imei or efs?
Please guide me it's my first time i need to update as I'm having mobile connectivity issues. Thanks
Click to expand...
Click to collapse
Here is a link to my Megadrive. If you only need the modem flash the non.hlos.bin
https://mega.nz/#F!NJ5VHS7Z!p0iO7bDiZ4kXny03EiAlWw
Use TWRP to backup EFS, it includes IMEI. You could use qpst to back up the QCN
Helpful Tip:
Search before making these kinds of post. These files have been shared thousands of times. Also, I have a clean Recovery page that has everything you need to restore your phone.
Thank you. I've flashed the non hlos modem after backing up my efs in twrp but haven't seen any difference in connectivity issues. Even my baseband version seems to be the same. Do you know if this modem is different to the one I had? Are there any other modem files I could test?
Thanks again for hosting these files. You've been a life saver
Chattersking said:
Thank you. I've flashed the non hlos modem after backing up my efs in twrp but haven't seen any difference in connectivity issues. Even my baseband version seems to be the same. Do you know if this modem is different to the one I had? Are there any other modem files I could test?
Thanks again for hosting these files. You've been a life saver
Click to expand...
Click to collapse
LeEco stopped updates at 21S, whereas int'l variants saw continued support. They sold their HQ to Yahoo, or some other company if memory serves (back in 2017). They didn't update the modem between 20S and 21S, with the latter releasing around Feb 2017.
Edit: I believe there's an EFS option in TWRP, not currently on my Pro 3.
Thanks ... for trying to help, but;
No one actually answered the questions the OP asked.
No one actually pointed OP to the latest modem in a flashable format.
So, where can one find the latest working modem for the Le Pro 3?
What version is that, and how can we tell if we have it, or not?
Also, is there a more update modem from the internations versions that work for the le pro 3
LargePrime said:
Thanks ... for trying to help, but;
No one actually answered the questions the OP asked.
No one actually pointed OP to the latest modem in a flashable format.
So, where can one find the latest working modem for the Le Pro 3?
What version is that, and how can we tell if we have it, or not?
Also, is there a more update modem from the internations versions that work for the le pro 3
Click to expand...
Click to collapse
727 only received 19, 20, and 21S. The last two share the same modem, as I already mentioned. The string listed above is the final version before LeEco USA crumbled in 2017. It ends in 00010. Check about phone section to see current one.
Otherwise, Tso linked the latest revision from his Mega account. Code and Mosimchah also have flashable 727 modems in their threads. IMG files can be installed via "fastboot" commands.
Int'l variants have newer versions of EUI up to 28S or 30S. You'll probably lose LTE+CA by flashing firmware for another variant.
https://forum.xda-developers.com/le-pro3/how-to/le-pro-3-x720-update-official-update-5-t3746794
So I saw somewhere someone had wanted a network unlock, and in my experience Combination Firmware usually ships with a carrier unlocked modem.bin. I went ahead and found the Revision 5 Combination Firmware for the N950U. Build number "N950USQU5ARG2", and it ships with modem build (found through fhred hex editor) "N950USQU5ARF1".
Typically when I see people pay someone online to unlock their phone, I notice that the new baseband/modem build reads the same as the baseband from that bootloader revision's combination firmware. Something as simple as ODIN flashing the CP portion of the firmware, something you probably know how to do already but paid someone to do for you.
But the firmware is useful for some things. It definitely allows you to dive deeper into the debug system.
Here is the Google Drive Link to "COMBINATION_FA71_N950USQU5ARG2": https://drive.google.com/file/d/1X3jf9k_XNSkER2mhyQRZIGgIKPdiozcJ/view?usp=sharing
I flashed this . how do I get back to a stock firmware . I'm stuck on this combination firm
Need to find rev 5 stock rom
pbedard said:
Need to find rev 5 stock rom
Click to expand...
Click to collapse
I haven't had any luck finding one . any recommendations
How about for rev 3?
So I'm currently going crazy.
Have s10+ unlocked.
Baseband version: G975U1UEU2ASGB
SM-G975U1_9_004
I'm wanting to flash tmobile firmware to improve cell signal.
I've done some research and know I need to flash U firmware just not sure which one and if it has to be them same as the current firmware the phone has.
Can someone please provide step by step on what I would need to do as well as what firmware I would need to flash to achieve this.
I don't want to mess it up and then suddenly get stuck on boot.
Thanks in advance.
XtreMe579 said:
So I'm currently going crazy.
Have s10+ unlocked.
Baseband version: G975U1UEU2ASGB
SM-G975U1_9_004
I'm wanting to flash tmobile firmware to improve cell signal.
I've done some research and know I need to flash U firmware just not sure which one and if it has to be them same as the current firmware the phone has.
Can someone please provide step by step on what I would need to do as well as what firmware I would need to flash to achieve this.
I don't want to mess it up and then suddenly get stuck on boot.
Thanks in advance.
Click to expand...
Click to collapse
Head over to sammobile and follow the directions in this link. You will need the modified Odin from here. The sammobile link is the latest t-mobile firmware. If you ever want to go back to the u1 firmware that is located here as well.
knife2240 said:
Head over to sammobile and follow the directions in this link. You will need the modified Odin from here. The sammobile link is the latest t-mobile firmware. If you ever want to go back to the u1 firmware that is located here as well.
Click to expand...
Click to collapse
Awesome thank you so much. I'll give it a go later today ?
Does anybody have a mirror or can you upload the latest tmobile firmware?
I've been trying to download for 4 days and at 92% the download just stops. Ive tried all sorts of different sites and nothing so far.
my experience is that samfirm works consistently while the others don't. Download the samfirm app then enter the model you want (SM-G975U). The region will be TMB for T-Mobile, and let it download the files and decrypt for you.
Try frija, I was losing my mind looking for it also, initially it didn't work but after installing c++ 8 something something it worked. Downloaded really fast also
I'm not able to find anything for T-Mobile USA in the latest version of this tool. Has anyone else been able to find it?
Hey there. My S10+ G975U is running G975USQS4DTF6, One UI 2.1, wanna flash unbranded.
Tried a couple tutorials from here but nothing has removed the AT&T bloatware.
Familiar with flashing, odin, combo files, etc.
It's my phone, completely accessible. I just want to remove the system hog bloatware.
'preciate it!
Just flash an G975U1 ROM and you will get rid of those bloatware
v1nhnguy3n said:
Just flash an G975U1 ROM and you will get rid of those bloatware
Click to expand...
Click to collapse
Thanks for your responce!
So have to root/unlock flash custom recovery first? If so I haven't found instructions for the US AT&T model.
Any advice much appreciated.
Tried two firmwares with odin 3.13.1, 3.13.3, 3.14.1 patched
G975USQS3CTB6_G975UOYN3CTB6_TMB
G975USQU1ASBA_G975UOYN1ASBA_USC
Always either SH256 SW and/or SW REV CHECK FAIL.
Tried another couple firmwares with odin 3.13.1, 3.13.3, 3.14.1 patched....
G975USQS3CTB6_G975UOYN3CTB6_TMB
still Always either SH256 SW and/or SW REV CHECK FAIL.
also always abl.elf, xbl.elf fail in Odin.
Should I use mount the Userdata? I think i've tried both ways and they fail. Ugh, losing track of what I've tried now.
I did this a year ago when I first got my S10+ Verizon and flashed the unlocked rom on it.
I believe that there's a modded version of oden here. Find it and download the latest original unlocked firmwear and you should be good.
No root and nothing
Salbawardi2 said:
I did this a year ago when I first got my S10+ Verizon and flashed the unlocked rom on it.
I believe that there's a modded version of oden here. Find it and download the latest original unlocked firmwear and you should be good.
No root and nothing
Click to expand...
Click to collapse
Downloaded the most recent through Frija for CSC "USC" and "TMO"
Tried flashing with Odin modded and regular. abd 3.14.4 now.
Still keep getting SW REV CHECK FAIL " [ab1]Fuzed 4 > Binary 3"
Also, the I've noticed sometimes HOME CSC is used or included when other times regular CSC is.
USERDATA is sometimes not used, what's up with that?
Thanks again for any more leads. I keep flashing and wishing lol
There are two very similar models: 975U and 975U1. The one ending in U1 should be unbranded.
I need to unlock bootloader?
alvaretto said:
There are two very similar models: 975U and 975U1. The one ending in U1 should be unbranded.
Click to expand...
Click to collapse
Recently tried both:
SM-G975U_1_20200722120433_iwlnbyil7p_fac
SM-G975U_1_20200610113004_mh0r74212v_fac
Both from Frija
Is that 1 in the middle correct?
Which version number of Odin is for S10+ Android 10 i guess would help narrow down my problem too?
Besides the firnware Odin has to match too right? Or can you just use the most recent version for any earlier firmwares too?
Added screenshots from Phone Info SAM
It comes down to confirming exactly which firmware is needed, version of Odin (modded or not), which CSC to put in(CSC or HOME) and is USERDATA necessary too?
Thanks again all!!!
djphooka said:
Which version number of Odin is for S10+ Android 10 i guess would help narrow down my problem too?
Besides the firnware Odin has to match too right? Or can you just use the most recent version for any earlier firmwares too?
Added screenshots from Phone Info SAM
It comes down to confirming exactly which firmware is needed, version of Odin (modded or not), which CSC to put in(CSC or HOME) and is USERDATA necessary too?
Thanks again all!!!
Click to expand...
Click to collapse
Most of your questions can be answered here. https://forum.xda-developers.com/s10-plus/how-to/sm-g975u-firmware-downloads-tmo-spr-att-t3908657
You can flash any Rom (V, ATT, or anty other American Rom) you want as long as you don't go backwards on your bootloader version. The version # is the 5th from the last digit on your baseband #. I flashed a U1 rom on Verizon bought S10+ and now get updates straight from Samsung with no vendor apps at all.
Winner:
USC-G975U1UES4DTG1-20200806151900
with Odin Odin3_v3.13.1_3B_PatcheD
You can archive or delete this thread.
Thanks for all the leads!