This is the latest firmware for HTC ONE M7 extracted from official OTA OTA_M7_UL_K44_SENSE60_MR_HTC_Europe_5.11.401.10-4.19.401.11_release_372404wj19h95c0x6oa19n.zip
You need unlocked bootloader and S-OFF
Removed Red Warning Text and flashed successfully on my phone.
This build is for
development purposes only
Do not distribute outside of HTC
without HTC's written permission.
Failure to comply may
lead to legal action.
The zip contain:
- firmware 5.11.401.10
- hboot 1.57.0000
- radio 4T.27.3218.14
Flash only if you have firmware v4.xx (download v4 from here) and hboot 1.56.000 not older or you'll get a bricked phone!!!
Download file and copy to your adb folder:
Download links in post 133
DON'T REBOOT THE PHONE UNTIL YOU GET A SUCCESS MESSAGE
1 - Reboot bootloader
Code:
adb reboot bootloader
2 - Reboot to RUU
Code:
fastboot oem rebootRUU
3 - Flash firmware
Code:
fastboot flash zip firmware_name.zip
Very important!!! One more time (press up arrow on your PC keyboard then press ENTER)
Code:
fastboot flash zip firmware_name.zip
4 - Reboot to bootloader and verify version
Code:
fastboot reboot-bootloader
5 - Reboot to system
Code:
fastboot reboot
6 - Enjoy
WARNING
Flash at your own risk, I can't be held responsible if you didn't follow all steps and brick the phone!!!
Stock unmodified firmware
MD5 3b7b13b52f75ed516c888b827710f29a
Zip contain stock kernel and recovery!!!
If your phone get bricked because you didn't follow the guide or flashed over a v3.xx firmware, go to HTC Unbricking Project thanx @dexter93
Only for M7_UL:
modelid: PN0710000
cidnum: HTC__001
cidnum: HTC__Y13
cidnum: HTC__E11
cidnum: HTC__102
cidnum: HTC__203
cidnum: HTC__405
cidnum: HTC__304
cidnum: HTC__A07
cidnum: HTC__032
cidnum: HTC__J15
cidnum: HTC__016
TeHashX said:
If case you need original firmware for:
modelid: PN0711000
modelid: PN0713000
modelid: PN0712000
modelid: PN0714000
modelid: PN0710000
modelid: PN071****
cidnum: HTC__***
cidnum: CWS__001
cidnum: H3G__***
cidnum: O2___***
cidnum: ORANG***
cidnum: TELNZ001
cidnum: OPTUS001
cidnum: T-MOB***
cidnum: TELST001
cidnum: VODAP***
cidnum: BM___001
cidnum: BS_US***
cidnum: GLOBA001
cidnum: ROGER001
cidnum: TELUS001
cidnum: TIM__***
The zip contain:
- firmware 5.11.1540.9
- hboot 1.57.0000
- radio 4T.27.3218.14
- the new splash screen "powered by android"
- stock boot
- stock recovery
http://goo.gl/V3yzDF
MD5 ef0cc76134c170e4230804ca1c9edf02
Click to expand...
Click to collapse
Dear friend:
Could you tell me if this firmware supports M7_UL with SuperCID????
This is the ORIGINAL format the "SD"???
Thank you very much and excuse my English
Yes, you can flash with super cid and will not format sdcard but always is better to save contents.
Thank you sir, everything went nice here m7ul supercid.
Is it cool to use this firmware on ViperOne 6.2.1? I know its not using the latest base. Shouldn't hurt though, right?
So I'm on AT&T with s-off and super CID. Can I flash this?
DrRyder said:
Is it cool to use this firmware on ViperOne 6.2.1? I know its not using the latest base. Shouldn't hurt though, right?
Click to expand...
Click to collapse
Yes
aceroller said:
So I'm on AT&T with s-off and super CID. Can I flash this?
Click to expand...
Click to collapse
TeHashX said:
Yes
Click to expand...
Click to collapse
Awesome. Thanks. Flashing here in a minute.
THX for firmware :highfive:
all set all done with no problem
C:\adb>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: 4T.27.3218.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 5.11.1540.9
(bootloader) version-misc: PVT SHIP S-OFF
I I flash this firmware and after:
c:\HTC>fastboot oem rebootRUU
...
(bootloader) Start Verify: 0
OKAY [ 0.047s]
finished. total time: 0.047s
c:\HTC>fastboot flash zip firmware_5.11.1540.9_noredwarn.
target reported max download size of 1514139648 bytes
sending 'zip' (24706 KB)...
OKAY [ 1.981s]
writing 'zip'...
(bootloader) zip header checking...
(bootloader) zip info parsing...
(bootloader) checking model ID...
(bootloader) checking custom ID...
(bootloader) start image[hboot] unzipping for pre-update
(bootloader) start image[hboot] flushing...
(bootloader) [RUU]WP,hboot,0
(bootloader) [RUU]WP,hboot,99
(bootloader) [RUU]WP,hboot,100
(bootloader) ...... Successful
FAILED (remote: 90 hboot pre-update! please flush image a
finished. total time: 3.604s
c:\HTC>fastboot flash zip firmware_5.11.1540.9_noredwarn.
target reported max download size of 1514139648 bytes
sending 'zip' (24706 KB)...
OKAY [ 2.044s]
writing 'zip'...
(bootloader) zip header checking...
(bootloader) zip info parsing...
(bootloader) checking model ID...
(bootloader) checking custom ID...
(bootloader) start image[rpm] unzipping & flushing...
(bootloader) [RUU]UZ,rpm,0
(bootloader) [RUU]UZ,rpm,100
(bootloader) [RUU]WP,rpm,0
(bootloader) [RUU]WP,rpm,100
(bootloader) ...... Successful
(bootloader) start image[sbl1-1] unzipping & flushing...
(bootloader) [RUU]UZ,sbl1-1,0
(bootloader) [RUU]UZ,sbl1-1,100
(bootloader) signature checking...
(bootloader) verified fail
(bootloader) ..... Bypassed
(bootloader) start image[sbl1-2] unzipping & flushing...
(bootloader) [RUU]UZ,sbl1-2,0
(bootloader) [RUU]UZ,sbl1-2,100
(bootloader) signature checking...
(bootloader) verified fail
(bootloader) ..... Bypassed
(bootloader) start image[sbl1-3] unzipping & flushing...
(bootloader) [RUU]UZ,sbl1-3,0
(bootloader) [RUU]UZ,sbl1-3,100
(bootloader) signature checking...
(bootloader) [RUU]WP,sbl1-3,0
(bootloader) [RUU]WP,sbl1-3,100
(bootloader) ...... Successful
(bootloader) start image[sp1] unzipping & flushing...
(bootloader) [RUU]UZ,sp1,0
(bootloader) [RUU]UZ,sp1,26
(bootloader) [RUU]UZ,sp1,50
(bootloader) [RUU]UZ,sp1,75
(bootloader) [RUU]UZ,sp1,100
(bootloader) [RUU]WP,sp1,0
(bootloader) [RUU]WP,sp1,100
(bootloader) ...... Successful
(bootloader) start image[radio] unzipping & flushing...
(bootloader) [RUU]UZ,radio,0
(bootloader) [RUU]UZ,radio,5
(bootloader) [RUU]UZ,radio,11
(bootloader) [RUU]UZ,radio,17
(bootloader) [RUU]UZ,radio,23
(bootloader) [RUU]UZ,radio,28
(bootloader) [RUU]UZ,radio,34
(bootloader) [RUU]UZ,radio,40
(bootloader) [RUU]UZ,radio,46
(bootloader) [RUU]UZ,radio,52
(bootloader) [RUU]UZ,radio,57
(bootloader) [RUU]UZ,radio,63
(bootloader) [RUU]UZ,radio,69
(bootloader) [RUU]UZ,radio,75
(bootloader) [RUU]UZ,radio,80
(bootloader) [RUU]UZ,radio,86
(bootloader) [RUU]UZ,radio,92
(bootloader) [RUU]UZ,radio,98
(bootloader) [RUU]UZ,radio,100
(bootloader) [RUU]WP,radio,0
(bootloader) [RUU]WP,radio,23
(bootloader) [RUU]WP,radio,46
(bootloader) [RUU]WP,radio,69
(bootloader) [RUU]WP,radio,92
(bootloader) [RUU]WP,radio,100
(bootloader) ...... Successful
(bootloader) start image[rcdata] unzipping & flushing...
(bootloader) [RUU]UZ,rcdata,0
(bootloader) [RUU]UZ,rcdata,42949671
(bootloader) [RUU]WP,rcdata,0
(bootloader) [RUU]WP,rcdata,42949671
(bootloader) ...... Successful
OKAY [ 13.915s]
finished. total time: 15.959s
c:\HTC>fastboot reboot-bootloader
rebooting into bootloader...
OKAY [ 0.031s]
finished. total time: 0.031s
After that my phone won't boot up, black screen and nothing more :crying: no red light after plug charger...
working fine here
many thanks :good:
Just finished flashing mine. I think now it's as good as brick. It won't come up after step 4. When connecting the charger - no light. Here is all the output I got:
Code:
C:\adb>adb reboot-bootloader
C:\adb>fastboot oem rebootRUU
...
(bootloader) Start Verify: 0
OKAY [ 0.106s]
finished. total time: 0.110s
C:\adb>fastboot flash zip firmware_5.11.1540.9_noredwarn.zip
sending 'zip' (24706 KB)...
OKAY [ 2.082s]
writing 'zip'...
(bootloader) zip header checking...
(bootloader) zip info parsing...
(bootloader) checking model ID...
(bootloader) checking custom ID...
(bootloader) start image[hboot] unzipping for pre-update check...
(bootloader) start image[hboot] flushing...
(bootloader) [RUU]WP,hboot,0
(bootloader) [RUU]WP,hboot,99
(bootloader) [RUU]WP,hboot,100
(bootloader) ...... Successful
FAILED (remote: 90 hboot pre-update! please flush image again immediately)
finished. total time: 4.335s
C:\adb>fastboot flash zip firmware_5.11.1540.9_noredwarn.zip
sending 'zip' (24706 KB)...
OKAY [ 2.078s]
writing 'zip'...
(bootloader) zip header checking...
(bootloader) zip info parsing...
(bootloader) checking model ID...
(bootloader) checking custom ID...
(bootloader) start image[rpm] unzipping & flushing...
(bootloader) [RUU]UZ,rpm,0
(bootloader) [RUU]UZ,rpm,100
(bootloader) [RUU]WP,rpm,0
(bootloader) [RUU]WP,rpm,100
(bootloader) ...... Successful
(bootloader) start image[sbl1-1] unzipping & flushing...
(bootloader) [RUU]UZ,sbl1-1,0
(bootloader) [RUU]UZ,sbl1-1,100
(bootloader) signature checking...
(bootloader) verified fail
(bootloader) ..... Bypassed
(bootloader) start image[sbl1-2] unzipping & flushing...
(bootloader) [RUU]UZ,sbl1-2,0
(bootloader) [RUU]UZ,sbl1-2,100
(bootloader) signature checking...
(bootloader) verified fail
(bootloader) ..... Bypassed
(bootloader) start image[sbl1-3] unzipping & flushing...
(bootloader) [RUU]UZ,sbl1-3,0
(bootloader) [RUU]UZ,sbl1-3,100
(bootloader) signature checking...
(bootloader) [RUU]WP,sbl1-3,0
(bootloader) [RUU]WP,sbl1-3,100
(bootloader) ...... Successful
(bootloader) start image[sp1] unzipping & flushing...
(bootloader) [RUU]UZ,sp1,0
(bootloader) [RUU]UZ,sp1,26
(bootloader) [RUU]UZ,sp1,50
(bootloader) [RUU]UZ,sp1,75
(bootloader) [RUU]UZ,sp1,100
(bootloader) [RUU]WP,sp1,0
(bootloader) [RUU]WP,sp1,100
(bootloader) ...... Successful
(bootloader) start image[radio] unzipping & flushing...
(bootloader) [RUU]UZ,radio,0
(bootloader) [RUU]UZ,radio,5
(bootloader) [RUU]UZ,radio,11
(bootloader) [RUU]UZ,radio,17
(bootloader) [RUU]UZ,radio,23
(bootloader) [RUU]UZ,radio,28
(bootloader) [RUU]UZ,radio,34
(bootloader) [RUU]UZ,radio,40
(bootloader) [RUU]UZ,radio,46
(bootloader) [RUU]UZ,radio,52
(bootloader) [RUU]UZ,radio,57
(bootloader) [RUU]UZ,radio,63
(bootloader) [RUU]UZ,radio,69
(bootloader) [RUU]UZ,radio,75
(bootloader) [RUU]UZ,radio,80
(bootloader) [RUU]UZ,radio,86
(bootloader) [RUU]UZ,radio,92
(bootloader) [RUU]UZ,radio,98
(bootloader) [RUU]UZ,radio,100
(bootloader) [RUU]WP,radio,0
(bootloader) [RUU]WP,radio,23
(bootloader) [RUU]WP,radio,46
(bootloader) [RUU]WP,radio,69
(bootloader) [RUU]WP,radio,92
(bootloader) [RUU]WP,radio,100
(bootloader) ...... Successful
(bootloader) start image[rcdata] unzipping & flushing...
(bootloader) [RUU]UZ,rcdata,0
(bootloader) [RUU]UZ,rcdata,42949671
(bootloader) [RUU]WP,rcdata,0
(bootloader) [RUU]WP,rcdata,42949671
(bootloader) ...... Successful
OKAY [ 15.458s]
finished. total time: 17.544s
C:\adb>fastboot reboot-bootloader
rebooting into bootloader...
OKAY [ 0.106s]
finished. total time: 0.109s
C:\adb>
Any ideas? Of course I had S-OFF...
simaka said:
Just finished flashing mine. I think now it's as good as brick. It won't come up after step 4. When connecting the charger - no light. Here is all the output I got:
Code:
C:\adb>adb reboot-bootloader
C:\adb>fastboot oem rebootRUU
...
(bootloader) Start Verify: 0
OKAY [ 0.106s]
finished. total time: 0.110s
C:\adb>fastboot flash zip firmware_5.11.1540.9_noredwarn.zip
sending 'zip' (24706 KB)...
OKAY [ 2.082s]
writing 'zip'...
(bootloader) zip header checking...
(bootloader) zip info parsing...
(bootloader) checking model ID...
(bootloader) checking custom ID...
(bootloader) start image[hboot] unzipping for pre-update check...
(bootloader) start image[hboot] flushing...
(bootloader) [RUU]WP,hboot,0
(bootloader) [RUU]WP,hboot,99
(bootloader) [RUU]WP,hboot,100
(bootloader) ...... Successful
FAILED (remote: 90 hboot pre-update! please flush image again immediately)
finished. total time: 4.335s
C:\adb>fastboot flash zip firmware_5.11.1540.9_noredwarn.zip
sending 'zip' (24706 KB)...
OKAY [ 2.078s]
writing 'zip'...
(bootloader) zip header checking...
(bootloader) zip info parsing...
(bootloader) checking model ID...
(bootloader) checking custom ID...
(bootloader) start image[rpm] unzipping & flushing...
(bootloader) [RUU]UZ,rpm,0
(bootloader) [RUU]UZ,rpm,100
(bootloader) [RUU]WP,rpm,0
(bootloader) [RUU]WP,rpm,100
(bootloader) ...... Successful
(bootloader) start image[sbl1-1] unzipping & flushing...
(bootloader) [RUU]UZ,sbl1-1,0
(bootloader) [RUU]UZ,sbl1-1,100
(bootloader) signature checking...
(bootloader) verified fail
(bootloader) ..... Bypassed
(bootloader) start image[sbl1-2] unzipping & flushing...
(bootloader) [RUU]UZ,sbl1-2,0
(bootloader) [RUU]UZ,sbl1-2,100
(bootloader) signature checking...
(bootloader) verified fail
(bootloader) ..... Bypassed
(bootloader) start image[sbl1-3] unzipping & flushing...
(bootloader) [RUU]UZ,sbl1-3,0
(bootloader) [RUU]UZ,sbl1-3,100
(bootloader) signature checking...
(bootloader) [RUU]WP,sbl1-3,0
(bootloader) [RUU]WP,sbl1-3,100
(bootloader) ...... Successful
(bootloader) start image[sp1] unzipping & flushing...
(bootloader) [RUU]UZ,sp1,0
(bootloader) [RUU]UZ,sp1,26
(bootloader) [RUU]UZ,sp1,50
(bootloader) [RUU]UZ,sp1,75
(bootloader) [RUU]UZ,sp1,100
(bootloader) [RUU]WP,sp1,0
(bootloader) [RUU]WP,sp1,100
(bootloader) ...... Successful
(bootloader) start image[radio] unzipping & flushing...
(bootloader) [RUU]UZ,radio,0
(bootloader) [RUU]UZ,radio,5
(bootloader) [RUU]UZ,radio,11
(bootloader) [RUU]UZ,radio,17
(bootloader) [RUU]UZ,radio,23
(bootloader) [RUU]UZ,radio,28
(bootloader) [RUU]UZ,radio,34
(bootloader) [RUU]UZ,radio,40
(bootloader) [RUU]UZ,radio,46
(bootloader) [RUU]UZ,radio,52
(bootloader) [RUU]UZ,radio,57
(bootloader) [RUU]UZ,radio,63
(bootloader) [RUU]UZ,radio,69
(bootloader) [RUU]UZ,radio,75
(bootloader) [RUU]UZ,radio,80
(bootloader) [RUU]UZ,radio,86
(bootloader) [RUU]UZ,radio,92
(bootloader) [RUU]UZ,radio,98
(bootloader) [RUU]UZ,radio,100
(bootloader) [RUU]WP,radio,0
(bootloader) [RUU]WP,radio,23
(bootloader) [RUU]WP,radio,46
(bootloader) [RUU]WP,radio,69
(bootloader) [RUU]WP,radio,92
(bootloader) [RUU]WP,radio,100
(bootloader) ...... Successful
(bootloader) start image[rcdata] unzipping & flushing...
(bootloader) [RUU]UZ,rcdata,0
(bootloader) [RUU]UZ,rcdata,42949671
(bootloader) [RUU]WP,rcdata,0
(bootloader) [RUU]WP,rcdata,42949671
(bootloader) ...... Successful
OKAY [ 15.458s]
finished. total time: 17.544s
C:\adb>fastboot reboot-bootloader
rebooting into bootloader...
OKAY [ 0.106s]
finished. total time: 0.109s
C:\adb>
Any ideas? Of course I had S-OFF...
Click to expand...
Click to collapse
I have the same i also had S-off and unlocked bootloader.
Now my phone is recognized as QHSUSB_DLOAD on Win7
alien44 said:
I have the same i also had S-off and unlocked bootloader.
Now my phone is recognized as QHSUSB_DLOAD on Win7
Click to expand...
Click to collapse
I think most likely both of us didn't have superCID. I am not sure whether I set it or not after set-off (it was a while ago)... No way to check it now ....
OP, why didn't you specificially input in your thread that superCID is required for this update? It makes sense, of course, but you should have put this there...
My phone is also bricked now damn..
Super CID is definitely NOT required, I successfully flashed this firmware and no super CID
Flashed on International M7, didn't brick.
simaka said:
I think most likely both of us didn't have superCID. I am not sure whether I set it or not after set-off (it was a while ago)... No way to check it now ....
OP, why didn't you specificially input in your thread that superCID is required for this update? It makes sense, of course, but you should have put this there...
Click to expand...
Click to collapse
I had super CID, S-OFF, Unlocker bootloader. What now?
Worked
Worked fine here, I did have Super-CID though....
Failed to pass validation, backup to fastboot
Boot up failed.
The flashboot flash mode screen says:
Product/Variant : potter 000000000000000 32GB P3B
....
oem_locked
All variables: https://file.io/rF0SqpBhP398
On running the cammands:
C:\ProgramData\RSA\Download\newfolder>fastboot flash partition gpt.bin
target reported max download size of 534773760 bytes
sending 'partition' (45 KB)...
OKAY [ 0.031s]
writing 'partition'...
(bootloader) Validating 'gpt.default.xml'
(bootloader) Committing 'gpt.default.xml'
(bootloader) - flashing 'gpt_main0.bin' to 'partition:0'
(bootloader) Flashing primary GPT image...
(bootloader) Failed to write primary GPT.
(bootloader) Failed to program partition table
FAILED (remote failure)
finished. total time: 0.123s
Every command is failing by saying remote failure.
I saw some flashboot commands and tried to run it. But I think it required oem unlocked. How to do that, can anyone please help me?
The Rescue and Smart Assistant software isn't working because the IMEI is showing all 0 (zero) here. And it says something is wrong and should go to customer support. Please help me guys. Let me know what should I do now? It is out of warranty as well.
For the image files I am using the same I downloaded via the rescue and smart assistant software.
#motog5 #motog5plus #oem_locked.
ssoni0097 said:
Failed to pass validation, backup to fastboot
Boot up failed.
The flashboot flash mode screen says:
Product/Variant : potter 000000000000000 32GB P3B
....
oem_locked
All variables: https://file.io/rF0SqpBhP398
On running the cammands:
FAILED (remote failure)
finished. total time: 0.123s
Every command is failing by saying remote failure.
I saw some flashboot commands and tried to run it. But I think it required oem unlocked. How to do that, can anyone please help me?
Click to expand...
Click to collapse
Within phone's Android -> Settings -> Developer options you have to enable "OEM Unlock" and reboot phone afterwards. Then you have to unlock phone's bootloader
Code:
adb devices
adb reboot fastboot
fastboot reboot fastboot
fastboot flashing unlock
fastboot reboot
jwoegerbauer said:
Within phone's Android -> Settings -> Developer options you have to enable "OEM Unlock" and reboot phone afterwards. Then you have to unlock phone's bootloader
Code:
adb devices
adb reboot fastboot
fastboot reboot fastboot
fastboot flashing unlock
fastboot reboot
Click to expand...
Click to collapse
But the phone is not turning on na .. It is stuck on the fastboot flash mode screen. How do I unlock the oem then
Try
Code:
fastboot reboot
to exit Fastboot mode
jwoegerbauer said:
Try
Code:
fastboot reboot
to exit Fastboot mode
Click to expand...
Click to collapse
The fastboot opens again. As I said, it is stuck there.
On selecting start on fastboot, it says
failed to validate boot image
ERROR: Failed to pass validation, backup to fastboot
Boot up failed.
Try to re-flash phone's Stock ROM.
jwoegerbauer said:
Try to re-flash phone's Stock ROM.
Click to expand...
Click to collapse
How to do that? Can you please help .. please
I tried following some steps, downloading the files from a website. But it results into fail.
Fix a dead Moto G5 plus and fix bootloop problem Animetrick
Recently my moto g5S plus got stuck on moto screen and I was flash with this method and this got worked on my phone. Now my phone was completely working and
animetrick.com
for example:
C:\Program Files (x86)\Minimal ADB and Fastboot1>fastboot flash partition gpt.bin
target reported max download size of 534773760 bytes
sending 'partition' (45 KB)...
OKAY [ 0.023s]
writing 'partition'...
(bootloader) Validating 'gpt.default.xml'
(bootloader) Committing 'gpt.default.xml'
(bootloader) - flashing 'gpt_main0.bin' to 'partition:0'
(bootloader) Flashing primary GPT image...
(bootloader) Failed to write primary GPT.
(bootloader) Failed to program partition table
FAILED (remote failure)
finished. total time: 0.157s
@sd_shadow can you help please?
What you basically are doing wrong is NOT to use Motorola's proprietary mfastboot but Google's fastboot.
Must admit I didn't know of this, too.
jwoegerbauer said:
What you basically are doing wrong is NOT to use Motorola's proprietary mfastboot but Google's fastboot.
Must admit I didn't know of this, too.
Click to expand...
Click to collapse
Tried with mfastboot as well. It shows the same thing ..
C:\mfastboot>mfastboot flash modem NON-HLOS.bin
target max-sparse-size: 256MB
sending 'modem' (71921 KB)...
OKAY [ 1.554s]
writing 'modem'...
(bootloader) Failed to erase partition
FAILED (remote failure)
finished. total time: 1.562s
jwoegerbauer said:
Within phone's Android -> Settings -> Developer options you have to enable "OEM Unlock" and reboot phone afterwards. Then you have to unlock phone's bootloader
Code:
adb devices
adb reboot fastboot
fastboot reboot fastboot
fastboot flashing unlock
fastboot reboot
Click to expand...
Click to collapse
Motorola devices require an unlock code
Unlocking the Bootloader | Motorola Support US
Visit the customer support page to view user guides, FAQs, bluetooth pairing, software downloads, drivers, tutorials and to get repair and contact us information.
motorola-global-portal.custhelp.com
ssoni0097 said:
Tried with mfastboot as well. It shows the same thing ..
C:\mfastboot>mfastboot flash modem NON-HLOS.bin
target max-sparse-size: 256MB
sending 'modem' (71921 KB)...
OKAY [ 1.554s]
writing 'modem'...
(bootloader) Failed to erase partition
FAILED (remote failure)
finished. total time: 1.562s
Click to expand...
Click to collapse
What does getvar all say?
Remove the imei line before posting
Code:
fastboot getvar all
You need the firmware that matches
Device Model #, Codename, and Software Channel.
If you have a windows PC try LMSA's fash rescue
Rescue and Smart Assistant (LMSA)(Motorola/Lenovo Only)
Rescue and Smart Assistant LMSA: Lenovo's Motorola Smart Assistant (PC) For Lenovo and Motorola Devices Only Rescue and Smart Assistant (LMSA) is an official tool installs on PC. Can help to manage smart device (include all Lenovo android phone...
forum.xda-developers.com
jwoegerbauer said:
What you basically are doing wrong is NOT to use Motorola's proprietary mfastboot but Google's fastboot.
Must admit I didn't know of this, too.
Click to expand...
Click to collapse
I generally do not use mfastboot, it has not been updated in years.
but if fastboot.exe fails, it doesn't hurt to try mfastboot.
sd_shadow said:
What does getvar all say?
Remove the imei line before posting
Code:
fastboot getvar all
You need the firmware that matches
Device Model #, Codename, and Software Channel.
If you have a windows PC try LMSA's fash rescue
Rescue and Smart Assistant (LMSA)(Motorola/Lenovo Only)
Rescue and Smart Assistant LMSA: Lenovo's Motorola Smart Assistant (PC) For Lenovo and Motorola Devices Only Rescue and Smart Assistant (LMSA) is an official tool installs on PC. Can help to manage smart device (include all Lenovo android phone...
forum.xda-developers.com
Click to expand...
Click to collapse
https://file.io/EEveR0bZCRDV
Tried the rescue and smart assistant tool as well. But it catches the imei as 0, and stops there.
Removed imei line below:
Code:
C:\ProgramData\RSA\Download\newfolder>mfastboot getvar all
< waiting for device >
(bootloader) version: 0.5
(bootloader) version-bootloader: moto-msm8953-C0.92(*)
(bootloader) product: potter
(bootloader) board: potter
(bootloader) secure: yes
(bootloader) hwrev: P3B
(bootloader) radio: 6
(bootloader) storage-type: emmc
(bootloader) emmc: 32GB SAMSUNG RX14MB RV=08 PV=07 FV=0000000000000007
(bootloader) ram: 4GB SAMSUNG LP3 DIE=8Gb M5=01 M6=05 M7=00 M8=5F
(bootloader) cpu: MSM8953
(bootloader) serialno: 3fb4905f
(bootloader) cid: 0xDEAD
(bootloader) channelid: 0x00
(bootloader) uid: 7D81062600000000000000000000
(bootloader) securestate: oem_locked
(bootloader) iswarrantyvoid: n/a
(bootloader) max-download-size: 534773760
(bootloader) reason: Last time flashing failed
(bootloader) meid:
(bootloader) date: 01-01-1970
(bootloader) sku: 000000000000000
(bootloader) carrier_sku:
(bootloader) battid:
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) current-time:
(bootloader) ro.build.fingerprint:
(bootloader) poweroffalarm: 0
(bootloader) ro.build.version.full:
(bootloader) ro.build.version.qcom:
(bootloader) version-baseband:
(bootloader) kernel.version:
(bootloader) sbl1.git: sbl1.git
(bootloader) rpm.git: rpm.git
(bootloader) tz.git: tz.git
(bootloader) devcfg.git: devcfg.git
(bootloader) keymaster.git: keymaster.git
(bootloader) cmnlib.git: cmnlib.git
(bootloader) cmnlib64.git: cmnlib64.git
(bootloader) prov.git: prov.git
(bootloader) aboot.git: git=MBM-NG-VC0.92-0-g3ea8df0
(bootloader) frp-state: no protection (err)
(bootloader) ro.carrier:
(bootloader) current-slot:
(bootloader) slot-suffixes: _a
(bootloader) slot-count: 1
(bootloader) slot-successful:_a: INVALID
(bootloader) slot-successful:_b: INVALID
(bootloader) slot-bootable:_a: INVALID
(bootloader) slot-bootable:_b: INVALID
(bootloader) slot-retry-count:_a: unknown
(bootloader) slot-retry-count:_b: unknown
all: listed above
finished. total time: 0.081s
sd_shadow said:
What does getvar all say?
Remove the imei line before posting
Code:
fastboot getvar all
You need the firmware that matches
Device Model #, Codename, and Software Channel.
If you have a windows PC try LMSA's fash rescue
Rescue and Smart Assistant (LMSA)(Motorola/Lenovo Only)
Rescue and Smart Assistant LMSA: Lenovo's Motorola Smart Assistant (PC) For Lenovo and Motorola Devices Only Rescue and Smart Assistant (LMSA) is an official tool installs on PC. Can help to manage smart device (include all Lenovo android phone...
forum.xda-developers.com
Click to expand...
Click to collapse
Tried every version of POTTER_RETAIL_8.1.0.XX (8 zip files) and run mfastboot oem get_unlock_data. But all resulted into the failure.
(bootloader) Unlock data:
(bootloader) read datablock error
(bootloader) Failed
OKAY [ 0.017s]
finished. total time: 0.019s
Please help.
ssoni0097 said:
Tried every version of POTTER_RETAIL_8.1.0.XX (8 zip files) and run mfastboot oem get_unlock_data. But all resulted into the failure.
(bootloader) Unlock data:
(bootloader) read datablock error
(bootloader) Failed
OKAY [ 0.017s]
finished. total time: 0.019s
Please help.
Click to expand...
Click to collapse
What does getvar all say?
sd_shadow said:
What does getvar all say?
Click to expand...
Click to collapse
MOTO G5 PLUS, stuck in fastboot flash mode
Failed to pass validation, backup to fastboot Boot up failed. The flashboot flash mode screen says: Product/Variant : potter 000000000000000 32GB P3B .... oem_locked All variables: https://file.io/rF0SqpBhP398 On running the cammands...
forum.xda-developers.com
Posted it above
ssoni0097 said:
Posted it above
Click to expand...
Click to collapse
Have you ever fetched the unlock code from Motorola? No way without it If you're not able to boot into your device try to flash the latest firmware and carry on from there.
Here's how to flash the latest firmware:
[GUIDE] Moto G5 Plus: Flashing Stock Firmware & Rooting [2021]
Flashing signed stock firmware: You need: Latest signed stock firmware: Europe (RETEU): https://mirrors-obs-2.lolinet.com/firmware/motorola/2017/potter/official/RETEU/ India (RETIN)...
forum.xda-developers.com
Wolfcity said:
Have you ever fetched the unlock code from Motorola? No way without it If you're not able to boot into your device try to flash the latest firmware and carry on from there.
Here's how to flash the latest firmware:
Click to expand...
Click to collapse
please share the link
I tried it by following instructions from Motorola site. The first command to get code is
mfastboot oem get_unlock_data. But it results into failure.
(bootloader) Unlock data:
(bootloader) read datablock error
(bootloader) Failed
OKAY [ 0.017s]
finished. total time: 0.019s
ssoni0097 said:
please share the link
I tried it by following instructions from Motorola site. The first command to get code is
mfastboot oem get_unlock_data. But it results into failure.
(bootloader) Unlock data:
(bootloader) read datablock error
(bootloader) Failed
OKAY [ 0.017s]
finished. total time: 0.019s
Click to expand...
Click to collapse
Did you check if your devices bootloader is unlockable at all?
Unlocking the Bootloader | Motorola Support US
Visit the customer support page to view user guides, FAQs, bluetooth pairing, software downloads, drivers, tutorials and to get repair and contact us information.
motorola-global-portal.custhelp.com
I would recommend to not use mfastboot as it is outdated. Better try this one:
[TOOL][WINDOWS] ADB & Fastboot++ | February 2023
NFO: • Versions: Installer, Portable & ADBKit • Android Debug Bridge & Fastboot updated to latest v1.0.41 (Version 34.0.0-9570255, February 2023) Features: • Installation Folder chooseable (Installer) • Desktop & Start Menu Shortcuts (Installer)...
forum.xda-developers.com
As written above, best may be to flash the latest signed firmware and start from scratch.
Follow this tutorial (the upper part):
[GUIDE] Moto G5 Plus: Flashing Stock Firmware & Rooting [2021]
Flashing signed stock firmware: You need: Latest signed stock firmware: Europe (RETEU): https://mirrors-obs-2.lolinet.com/firmware/motorola/2017/potter/official/RETEU/ India (RETIN)...
forum.xda-developers.com