Related
Hi folks,
I'm aware of the registry hack to change the RingTone settings (such as vibrate length, etc), but can this be done for the notification alert? When I get a notification the phone just vibrates for too long.
Any help appreciated.
PaulB
Hi,
Any help on this would be most appreciated, as the vibrate just goes on too long, and not only annoys me but everyone in my (quiet) office!
You can set the vibrate length in seconds for RingTone0 in the registry so there must be an equivalent for the notification alert?
PaulB
i second this request, the whole scripting thing for ringtone0 is simple but bizarre especially as there seems to be no equivalent settings for text/email notifications. There must be a way!
Change duration of notification vibration (hey I'm a poet!)
Sorry to bump this again, but as some time has passed I wondered if anyone had managed to find the reg settings for the notification alert?
I really need to shorten the vibration duration for notifications.
I second this, the message alert is way to long. Hope someone have a sollution to this.
Jarle
Fix for long vibration
I recently switched from the Sidekick 3 (I had the sidekick 1, sidekick 1 color, and sidekick 2 as well) to the 8525/TyTN and immediately found this vibration issue described above extremely annoying. The sidekick uses the sound file normally played to generate the vibration pattern, meaning if the sound file has two large amplitude alerts 1 second apart, if the phone is in vibrate mode, it would vibrate twice, with a 1 second spacing.... along with "the beat" of the audio.
Anyways, I discovered today that Windows Mobile does this as well to some extent. If the phone is set to vibrate mode, then it seems that all notifications vibrate as the long, 5 second or so, vibrate that you're all familiar with. HOWEVER, if the notification is set to vibrate and sound acoustically, it vibrates for the duration of the sound file. Strangely, this does not work when the phone is set to only vibrate. To get around this, what you need to do is set your notification (text message, e-mail, whatever) to both play a short sound and vibrate, then set your phone's audio to be on, but then turn the volume all the way down. In this setting, the phone does not play a sound, but does vibrate according to the length of the audio file.
I haven't tested this extensively, but it seems to work so far. This actually was one of my biggest complaints about the phone and i'm very glad i've found a simple work-around.
Let me know your experiences and/or if it doesn't work for you,
Todd
quite a great idea there, but was hoping someone has figured out a better solution?
what about going one step further with this and make a short wav file of pulsed noise, but at 20kHz. you won't here it!
All,
I have just joined this board searching for a solution to EXACTLY this problem. What is required please is a registry tweak that shortens the vibration alert for text messages, etc, when the phone is set ot vibrate only.
The ringtone fix to shorten the vibration alert works when a call comes in but NOT when a message comes in.
Any help on this would be very much appreciated.
Thanks
WB
Oh wow. I have the same annoyance with my phone. You send a text on vibrate and it goes nuts for an hour! Not really that long, but for just a text message notification it should be a little 1 second bitz.
This long vibration is really bad when you are in class and it goes for so long. My phone hits right against those plastic chairs through my pocket and resonates though out the whole room.
Unfortunately the Notification registry entries don't have a script option.
If you go into
HKEY_CURRENT_USER\ControlPanel\Notifications
the Default String tells you what the each directory is for.
The other keys are
AvailableOptions - What options you can pick from in the Sound/Notifactions screen in settings,
Duration - the length of time the light flashes (5,10,15,20,30,45,60min, 0=no limit)
Options - what sort of notifications you want
1=play sound
2=vibrate
3=play sound, vibrate
4=flash light
5=play sound, flash light
6=flash light, vibrate
7=play sound, flash for, vibrate
8=nothing
9=play sound, display message
10=nothing (can only pick play sound and vibrate)
11=play sound, display message, vibrate
12=Display message, Flash light
13=play sound, display message, flash light
14=display message, flash light, vibrate
15=play sound, display message, flash light, vibrate
senergy said:
Unfortunately the Notification registry entries don't have a script option.
Click to expand...
Click to collapse
So what you are saying is there is no way of making the vibration shorter? No way at all? Could you add an option for time? Is there some program?
Senergy,
Many thanks for your response. Disappointing news as this is a serious nuisance.
I have lost count of the number of times I have been in meetings where the phone has gone off in vibrate mode only for the whole world to know I have had a message. Many a time I simply turn all alerts off which defeats the objective of having a discrete vibrate system.
I rang HTC's support team in the UK and got nowhere.
I wonder if a written query into them might get a more productive response?
WB
Anyone heard of any solutions yet? I've been searching google, forums, etc for days with no luck yet.
DRChrysler,
No but see thread link below. Shantz may yet be able to help us out here.
Cheers
WB
http://forum.xda-developers.com/showthread.php?t=311838
Hello guys, I have a very very annoying problem: from time to time my Hermes starts ringing with the standard ringtone , I guess its called Windows Default something..... It is incredibly annoying. I guess you realize that I dont get any call, I dont have alarms scheduled, my pocket pc doesnt do any other strange thing. It just starts ringing (playing) that stupid song, over and over again, untill I turn it to Vibrate.
Check your notification queue.
Please be a little more specific.... What is the notification queue? I didnt mention it starts immmediately after a soft reset or a restart.
Use Check Notification
http://www.scarybearsoftware.com/cn_overview.html
To check if you have notifications that are weirdly scheduled (looks random to you, not attached to any reminder) that may be responsible for your random ringing, which may be trigger by the built in alarm (whch uses the same default ring tone)
Unbelievable.... I feel like smashing it to a wall... it really gets on my nerves.... Thank you man, I tried te program, but the reminder or whatever it is , its still there.
Am i missing something here,..?? I have set a MP3 as my incoming ring tone and the file lasts for just over 1 minute but when it is assigned as my incoming ring tone it will only ring for no more 12 seconds before registering a missed call, is there a way to increace the ring tone time before going to missed call, the damm thing has me running like mad around the house to answer before it rings off
I am sure there is a simple answer to this,,,??
As part of the phone settings there are settings for what happens after your phone rings for a length of time and also for how long your phone should ring before being diverted.
Take a look there and see if it solves your problem!!
Matt
The only options in here are "Answer incoming calls without pressing" which is not ticked and "Talk after" and i have set it for 10 rings. But because the tone is a mp3 song, it does not seem to go on for more than 10 seconds, is there another way or am i looking in the wrong place
Start->Settings->Phone->Services->Call Forwarding->"Forward phone calls only if"-> "No answer: voicemail number, Forward after: 30 seconds"
ahh man, thats great...sorted out fine..but what a daft place to put it. Would have thought it would be something obvious....must be my age..hehe Cheers
If youre device has video calling/receiving - theres a similar option accessed from the phone pad, under video call settings.
Matt
I've set a very loud noise for notifications of appointments, missed calls, arrived SMS's and so on. But Amsterdam is a noisy city, so it often happens that I do not hear the initial notification. Of course I can see them once I see my Today screen. But I'm one of those rare people who's not staring at the today screen all day ;-)
appointment notification settings has a check box for "repeat". Very nice, but that doesn't repeat anything as long as the notification dialog is still on.
Missed calls and arrived SMS's do not have that repeat setting by default.
And I do not really understand what the use is of a loud notification right after I missed a loud ringtone. I want to be notified later on until the device sees that I take action.
I found out that I could turn that on by replacing a registry key value from 9 to 40000019 (I believe, I can check that later). Borrowed that setting from the appointment notification.
The bad news is that the notification after a missed call/SMS now doesn't stop repeating after I've read the SMS or followed up the missed call. It goes on and on till I either reset or till it drains the battery.
Any suggestions from different registry settings up to commercial software are welcome.
Maggy
I just find that the ringer is often not loud enough for me. Maybe it's my ripe old age of 32 that has brought me to this point of degraded ability but if I leave my phone downstairs or vice versa, I usually won't hear it ring. Worse is the one time sound notification, that's rather short in my opinion, for SMS's. Both of these are even worse if I forgot to remove my phone from the protective sleeve.
I searched and only found people having issue with the volume in relation to calls but no mention if I could increase ringer volume above what is currently selectable. Is there any way to increase this volume and/or extend the ring time for the text notifications?
http://www.wirelessinfo.com/content/T-Mobile-G1-Cell-Phone-Review/MakingReceiving-Calls.htm
According to that website, they tested the G1 ringer volume and found it to have the lowest dB of all the phones they tested.
Is it that speaker is underpowered? Is it possible that we may be able to re-encode the ring tones with a higher volume to help compensate?
I don't think it has a low volume... I think it has to do with what you are using because it is just as loud as my Wing when playing music.
What I'm using? As in which ring tone? I've tested several different ones and they all seemed the same to me. Do you have any suggestions?
I have the same problem frequently, it isnt that you dont hear the rings or notifications, they actually dont play at all. I have had this happen with my phone on in front of mewith a great signal, and I call it from another line. It "rings"(but never does), finally ending in a voicemail. When I hang up and check the G1 it shows a missed call and voicemail.
Unfortunately there is no fix, just a reminder that you bought a phone that shouldnt be expected to work until the system is given time to mature. Until then, you either return the phone, sell it, or live with its limitations. (or so I have been told)
No, I have that happen too, but I do frequently have it ring just not loud enough for me to hear it. I know because my girlfriend often has to tell me when it's ringing if I've left it in another part of the house.
I have also noticed that the ring volume isnt great with the standard wring tones. Using mp3 ringtones is better.
Notifications do sometimes seem buggy. I have had no notifactions with messages when i have had the message application open. Not even vibrate.
I have missed calls installed now for notifications and it seems to not happen anymore.
Theres also a program out in the market that allows you to create your own ringtones from full songs. You could just cut a song into a small section and use that for messaging.
Its called ringdroid
I have missed calls installed now for notifications and it seems to not happen anymore.
Click to expand...
Click to collapse
The down-side to this feature of the program is, the notification light will stop. If you check your missed calls, texts, so on from the bar on top.
You have to actually open the "programs" manually to keep the notification light working.
Ex. if you get a missed call, instead of pulling down the notification bar to check. Press the call button once.
if you get a text, open the messeging inbox using the messeging button or SMSChomp button.
Try to limit how often you have to pull the notification bar down.
Pulling the notification bar DISABLES ALL notifications of all kind.