Database Users

Unlock Bootloader B13 Chinese version

Hi all,
I have been wandering the forums for about a few days now with the question
Can i unlock bootloader for my Axon 7 (chinese edition) with build B13.
I have tried to sideload B20 but this fails.
Tried to replace the fastboot image. but the ADB wont see any device after going into recovery mode.
I have tried almost all guides how this should be done.
Could anyone help me with this?
Kind regards enkrs(the netherlands)

I have the same issue. I can connect to the phone and make a recovery image but it won't write. I get stuck in a Chinese menu which I don't wanna mess with.
Tried googling a translation of the menu (mifavor iirc) but couldn't find it.
Any help would be appreciated.

Anybody ?

Did you success ? i have same problem.

Eroticus said:
Did you success ? i have same problem.
Click to expand...
Click to collapse
Nope.... nobody seems to know :/ everybody that responds to this question on the internet talks about the US version and doesn't respond anymore when you mention the Chinese one

I have success in unlocking bootloader of b13.
here you go:
https://forum.xda-developers.com/axon-7/how-to/guide-b13-chinese-a2017-root-unlock-t3549873

otaconremo said:
I have success in unlocking bootloader of b13.
here you go:
https://forum.xda-developers.com/axon-7/how-to/guide-b13-chinese-a2017-root-unlock-t3549873
Click to expand...
Click to collapse
Man, i am having A2017 with B12 and MM. Can you please guide me?

satish.yarramsetti said:
Man, i am having A2017 with B12 and MM. Can you please guide me?
Click to expand...
Click to collapse
Just update your phone to B13 MM first. Then you can follow my guide to unlock bootloader, install twrp and/or root.

Huawei Mate 9 PRO bricked - $50 reward

Hi guys
My LON-L29 Huawei Mate 9 PRO is bricked, kinda. I have twrp on it, but no OS. I can also enter fastboot mode.
I will give $50 to the person who can get the phone working again.
Please feel free to ask me ANYTHING you need to know.
Thank you in advance
/CK
To mod: I know this is the Huawei Mate 9 forum, but I'm desperate for some help here.

Here is the firmware. Flashing it in TWRP should be okay. http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1367/g104/v68545/f1/full/update.zip

I can help you. Tell me exactly what model you have. LON-L29C432? I need the model information beyond the C.

enzo24754 said:
Here is the firmware. Flashing it in TWRP should be okay. http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1367/g104/v68545/f1/full/update.zip
Click to expand...
Click to collapse
Thank you, will try
/CK

duraaraa said:
I can help you. Tell me exactly what model you have. LON-L29C432? I need the model information beyond the C.
Click to expand...
Click to collapse
How can I find out since I can't boot it
/CK

Phone is up and running thanks to @CaptainTiiti who gets the $50 reward.
Thank you xda community for your suggestions!
/CK

Can you share his solution? And how did you install twrp on it? I know mate 9 is somehow supported unofficially but not on mate 9 pro.

enzo24754 said:
Here is the firmware. Flashing it in TWRP should be okay. http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1367/g104/v68545/f1/full/update.zip
Click to expand...
Click to collapse
I have M9P : LON-L26C636B139 and I've the same problem like Cafe King. I tried using enzo24754's suggestion, but not success. The screen shows " E: unknown command [errno] , update process ended with error : 7 "
May I ask for your suggestion, thank you very much.

apinun_pora said:
I have M9P : LON-L26C636B139 and I've the same problem like Cafe King. I tried using enzo24754's suggestion, but not success. The screen shows " E: unknown command [errno] , update process ended with error : 7 "
May I ask for your suggestion, thank you very much.
Click to expand...
Click to collapse
Same issue here

i think your only hope is reddit.com/r/Funkyhuawei.

I would like to share my experience how I successfully unbricked my Mate 9 Pro (LON-L29C636).
- My M9P was bricked. I've (Raygrobe) TWRP on it, but no OS.
- I tried every methods to flash the firmware but no luck.
- I downloaded C636 offline firmware (MHA-L26C636B110 firmware from Huawei Mate 9 Guides Forum and flash it from SDCard using 3 buttons method by Dload folder with success. My M9P changed to M9 with MHA model. It worked quite well, not much difference from M9P.
- I tried to rebrand to M9P using firmware for LON-L29C636 neither Dload or Firmware Finder method but no luck. The Firmware Finder struck on "Send to updater" menu.
- Someday later, I tried using "System Update" in settings menu. This time it asked if I want to change the model. After I accepted, it started to flash. Finally my M9P get back from brick stage to LON-L29C636B156.
Edit : Actually, in this case you may bring your M9P to Huawei Customer Service Center and ask them to reset your M9P and install the new firmware with no cost.

HUAWEI Enjoy 7S (FIG-AL10) rebranding to HUAWEI P Smart (FIG-LX1): feasible? how?

I bought a Huawei Enjoy 7s (FIG-AL10) in China, but now I would like to rebrand it to a European version (FIG-LX1).
I read tons of posts suggesting to use TWRP, but there is no TWRP available for this phone.
I found a firmware for FIG-LX1 version on Firmware Finder, but now I do not know how to load it into the phone and rebrand it.
Any suggestions?
Thanks.

steveleg said:
I bought a Huawei Enjoy 7s (FIG-AL10) in China, but now I would like to rebrand it to a European version (FIG-LX1).
I read tons of posts suggesting to use TWRP, but there is no TWRP available for this phone.
I found a firmware for FIG-LX1 version on Firmware Finder, but now I do not know how to load it into the phone and rebrand it.
Any suggestions?
Thanks.
Click to expand...
Click to collapse
I bought the huawei P smart which is the European version of Huawei Enjoy 7s. i think we should wait for a forum to be opened here for this device before we can do anything like unlocking bootloader or Rebranding and rooting.
just be patient bro.

I've just found a procedure to root Huawei P Smart, but XDA does not allow me to post the link.
Try to look in google: "Huawei P smart - Root - Anleitung".
It works perfectly. I tried it out on my Huawei Enjoy 7S.
Next thing would be to flash another firmware to change from Chinese to European version, but I'm still not sure how to do it.

steveleg said:
I've just found a procedure to root Huawei P Smart, but XDA does not allow me to post the link.
Try to look in google: "Huawei P smart - Root - Anleitung".
It works perfectly. I tried it out on my Huawei Enjoy 7S.
Next thing would be to flash another firmware to change from Chinese to European version, but I'm still not sure how to do it.
Click to expand...
Click to collapse
But I'm allowed to post the link. The instructions are mine.
https://www.android-hilfe.de/forum/...-smart-how-to-root-root-anleitung.866625.html

ChinHon said:
But I'm allowed to post the link. The instructions are mine.
Click to expand...
Click to collapse
:good::good::good::good:
So maybe you know if I can flash FIG-LX1 8.0.0.122 (C432) firmware on my Huawei Enjoy 7S..

steveleg said:
:good::good::good::good:
So maybe you know if I can flash FIG-LX1 8.0.0.122 (C432) firmware on my Huawei Enjoy 7S..
Click to expand...
Click to collapse
Try the procedure from my root thread [How to Unbrick]. There's the C432 cust in there.

ChinHon said:
Try the procedure from my root thread [How to Unbrick]. There's the C432 cust in there.
Click to expand...
Click to collapse
I just tried, but system.img writing failed.
In the rescue.exe compressed folder it seems that there are two files: system.img and vendor.img.
Is vendor.img to be renamed to cust.img?

Sorry. I uploaded vendor instead of cust. Will replace the download by tomorrow.
Just translated the tuto:
https://forum.xda-developers.com/general/general/how-to-root-huawei-p-smart-fig-lx1-t3752705

ChinHon said:
Sorry. I uploaded vendor instead of cust. Will replace the download by tomorrow.
I tried to flash from fastboot cust.img and system.img of P Smart on Enjoy 7S but writing failed.
Probably rebrand on this phone involves other partitions or files (oeminfo?) that I'm still not aware of.
I hope a procedure for rebrand will be released soon.
Click to expand...
Click to collapse

@steveleg
Looking over your post i would like to do the same thing.
Have you had any luck? I see there is a TWRP out and an update at the above link to android-hilfe forum. I did post a reply there but seem to have had my account locked for now :crying:, so though i might see how you did while i wait for help.

What is the name of your account? (Savvoh)? I'm moderator there.

ChinHon said:
What is the name of your account? (Savvoh)? I'm moderator there.
Click to expand...
Click to collapse
Hey @ChinHon, exact same as here. Savvoh
Error: Du wurdest aus folgendem Grund gesperrt: Wegwerf-Mail.

.....

Savvoh said:
Hey @ChinHon, exact same as here. Savvoh
Error: Du wurdest aus folgendem Grund gesperrt: Wegwerf-Mail.
Click to expand...
Click to collapse
Your account is open again. Please remember to always include a German translation with your questions. Only then will you get an answer.
:good:

ChinHon said:
Your account is open again. Please remember to always include a German translation with your questions. Only then will you get an answer.
:good:
Click to expand...
Click to collapse
Thanks so much, really appreciate the help. I will do so in the future.
Just to confirm what would be the reason to flash and install a TWRP? For dev reasons only?
Or just to remove all the preset Chinese settings?

@ChinHon
Interesting i can install all the services from Google-Installer-v3 onto a Enjoy 7S, but can not open the Play Store or Drive as it just hangs on the loading screen. And never actually goes in.
Haha, im stumped .

Find the current Playstore Apk from the net and install it.
TWRP is necessary for Magisk rooting or to create backups or flash zip`s.
I can't help much with dabranding. I don't know very much about that.

Savvoh said:
@steveleg
Looking over your post i would like to do the same thing.
Have you had any luck? I see there is a TWRP out and an update at the above link to android-hilfe forum. I did post a reply there but seem to have had my account locked for now :crying:, so though i might see how you did while i wait for help.
Click to expand...
Click to collapse
I tried in several ways to install C432 firmware on my Enjoy 7S, but no way to flash System.img.
As soon as I flash C432 oeminfo file FRP gets locked and I cannot flash anything anymore.
I tried also Dc Unlocker tools, but System.img flashing stops with the message "Sparse flash write failure".
I'm still looking for somebody who managed to rebrand the Enjoy 7S to P Smart.

steveleg said:
I tried in several ways to install C432 firmware on my Enjoy 7S, but no way to flash System.img.
As soon as I flash C432 oeminfo file FRP gets locked and I cannot flash anything anymore.
I tried also Dc Unlocker tools, but System.img flashing stops with the message "Sparse flash write failure".
I'm still looking for somebody who managed to rebrand the Enjoy 7S to P Smart.
Click to expand...
Click to collapse
I wish i could help,I cant currently even get any Google option on the Enjoy 7S to run. Even trying to add a google account to cloud just freezes. Seems as soon as any Google option is chosen, the Google Services just states "Restarting".
Out of options.

Google services installation was an easy task compared to rebrand.
Download GMS from the link below:
https://mega.nz/#!WqYwyLyD!l7H8WRHBHs0ZwpyE0w2c7n6AvTSpTF29KjjX7_MM2u8
Procedure:
1. Install GMS (it is going to clear all previous google apps and restart the phone)
2. Install google play that I included in the zip file.
Let me know. For me it worked like a charm.

Locking bootloader. OnePlus 6T

Hello! I need some help with locking the boot loader. I uninstalled Magisk and om now trying to update to Android 10.
I have a OnePlus 6T.
I looked around for solutions and I found the local update method. Would that work?
Thank you for helping me out. I'm new to rooting and really appreciate the help!

Callz said:
Hello! I need some help with locking the boot loader. I uninstalled Magisk and om now trying to update to Android 10.
I have a OnePlus 6T.
I looked around for solutions and I found the local update method. Would that work?
Thank you for helping me out. I'm new to rooting and really appreciate the help!
Click to expand...
Click to collapse
Use MSM Download Tool. Easiest and Simplest Method.

[Request] OnePlus 8 Pro CN IN2020 MSM Unbrick Tool for HydrogenOS

Hi. As title says could someone share this tool for the CN HydrogenOS OP8P? No results show up online. There's a similar thread for the Oneplus 7T Pro Mclaren Edition.
Just in case, for safekeeping.
Thanks!

Bump.. does anyone know if the tool for H2OS exists?

just used it on my in2020 fine
don't think it matters just pick international and done
nvm different OS version

TheUndertaker21 said:
just used it on my in2020 fine
don't think it matters just pick international and done
nvm different OS version
Click to expand...
Click to collapse
Could you elaborate a bit:
What OOS did you have on your device prior to using international MSM?
Was it EU OOS, US OOS? They are actually the same software wise i think but it's not the same region.
Does your fingerprint still work after using the tool?

android2819 said:
Could you elaborate a bit:
What OOS did you have on your device prior to using international MSM?
Was it EU OOS, US OOS? They are actually the same software wise i think but it's not the same region.
Does your fingerprint still work after using the tool?
Click to expand...
Click to collapse
i had the latest version of OOS Installed and yeah it did and now im on DP4

TheUndertaker21 said:
i had the latest version of OOS Installed and yeah it did and now im on DP4
Click to expand...
Click to collapse
Ok so basically:
1.You bought your phone from China, it's the IN2020 chinese OP8P.
2.When you received it, you already had OOS on it, the seller made sure to flash it before shipping.
3. Can you tell me what was the latest OOS version you had prior to switching to DP4?
International/North American OOS is 10.5.13.IN11AA
European OOS is 10.5.12.IN11BA
I live in EU and once my device arrives i wanna make sure if the seller put EU OOS on it, in the case i brick the phone i can safely use the MSM tool which is tied to my OOS region.
Basically my confusion is: do i have to use the MSM tool of the device region or the MSM tool of the software region? That's it.
From what i understand, you had International / NA OOS on a Chinese phone and used international MSM and all works fine. Which means it's based on software region and not the device itself.
Thanks a bunch

Any Developer Have OnePlus 8 Pro CN IN2020 MSM Unbrick Tool For HydrogenOS Give Us For More Use

Please let's do get linkdownload