Related
1. Looking at buttons in Settings, the list is simply empty, no buttons to assign. Am I doing something wrong?
2. Also, I can't find an option to make the X button actually close an app, instead of minimizing it. Again, am I doing something wrong?
3. I noticed that on first startup Windows doesn't ask you to align the screen. Yet the option is there. But how do you accurately align the screen with fingers? I find the screen very unresponsive in the top left and right corner. Also, while typing I have to aim somewhat above the key I mean to hit. Is this a question of getting used to, or has it to do with bad alignment?
4. Where's the autorotation? Is there a way to tell the device which apps to autorotate and which not? For now, hardly anything rotates of its own accord. And since I can't assign rotation to a button it might as well go without a G-sensor.
bartveld said:
1. Looking at buttons in Settings, the list is simply empty, no buttons to assign. Am I doing something wrong?
2. Also, I can't find an option to make the X button actually close an app, instead of minimizing it. Again, am I doing something wrong?
3. I noticed that on first startup Windows doesn't ask you to align the screen. Yet the option is there. But how do you accurately align the screen with fingers? I find the screen very unresponsive in the top left and right corner. Also, while typing I have to aim somewhat above the key I mean to hit. Is this a question of getting used to, or has it to do with bad alignment?
4. Where's the autorotation? Is there a way to tell the device which apps to autorotate and which not? For now, hardly anything rotates of its own accord. And since I can't assign rotation to a button it might as well go without a G-sensor.
Click to expand...
Click to collapse
With point 3, you'll get some debate about this with various people. I think there should be an alignment as everyone presses the screen at different angles and its not going to know that unless you align it.
HTC Hero had same problem, screen edges were unresponsive, until you did a calibrate of the keyboard and then it was perfect.
It is an option missing...!
ad 1: if you make shortcut of any program you want to run, rename it to long_send.lnk and copy to C:\windows, then long press left button and this program will be executed. (I downloaded from XDA rotate.exe to rotate screen)
ad 2: install Duttys HTC task manager, restart and X is back (also in settings yo can configure its function)
ad 4: there is a possibility to "unlock" rotation in registry, but as long as you can not see any buttons in buttons setting it's pointless... that's why I used point 1 solution
bartveld said:
3. I noticed that on first startup Windows doesn't ask you to align the screen. Yet the option is there. But how do you accurately align the screen with fingers? I find the screen very unresponsive in the top left and right corner. Also, while typing I have to aim somewhat above the key I mean to hit. Is this a question of getting used to, or has it to do with bad alignment?
Click to expand...
Click to collapse
It's still there (sorry in Dutch)
Start > Instellingen > Menu > Meer > Systeem > Scherm
In English it should be something like
Start > Settings > Menu (at the bottom of the screen) > More > System > Screen
Vlk_77 said:
ad 1: if you make shortcut of any program you want to run, rename it to long_send.lnk and copy to C:\windows, then long press left button and this program will be executed. (I downloaded from XDA rotate.exe to rotate screen)
Click to expand...
Click to collapse
Is this some cruel joke ? how did you do that on HD2 ?? Would be awesome if it worked....
EDIT: MY BAD.... Best trick ever !! thx !
Thanks for the input, everybody.
if you make shortcut of any program you want to run, rename it to long_send.lnk
Click to expand...
Click to collapse
Still, that gives me just one long press button to assign. There are at least three buttons that could be used for different apps. I just don't understand what HTC were thinking. Why have 5 buttons on a device and disabling the assign option?
It's still there (sorry in Dutch)
Start > Instellingen > Menu > Meer > Systeem > Scherm
Click to expand...
Click to collapse
I know it's still there, but I wonder how you can properly align a screen with finger presses as opposed to the pinpoint accuracy of a stylus.
Before this I had the Omnia 2 with the same lack of autorotation options (actually, I'd hoped that returning to HTC would have solved that, but no...). Some clever developer had whipped up a very nice program called RotationDetection, with which you could decide which apps should autorotate. Something like that should be made for the HD2!
Vlk_77 said:
ad 1: if you make shortcut of any program you want to run, rename it to long_send.lnk and copy to C:\windows, then long press left button and this program will be executed. (I downloaded from XDA rotate.exe to rotate screen)
Click to expand...
Click to collapse
I tried this, and for some reason I can't get it to work. Here's what I did:
Downloaded rotate.exe to my storage card.
Created a shortcut to rotate.exe, also on the storage card, and renamed it long_send.lnk
Copied this shortcut and pasted it in the Windows directory on the phone.
Now, if I select long_send.lnk in the Windows directory, the screen does indeed rotate. But I can't get the screen to rotate by holding the send key down.
I have already soft-reset, and this does not solve the problem.
Any ideas?
robertlewisca said:
I tried this, and for some reason I can't get it to work. Here's what I did:
Downloaded rotate.exe to my storage card.
Created a shortcut to rotate.exe, also on the storage card, and renamed it long_send.lnk
Copied this shortcut and pasted it in the Windows directory on the phone.
Now, if I select long_send.lnk in the Windows directory, the screen does indeed rotate. But I can't get the screen to rotate by holding the send key down.
I have already soft-reset, and this does not solve the problem.
Any ideas?
Click to expand...
Click to collapse
Did you use THIS Rotate Screen with the shortcut link?
http://forum.xda-developers.com/showthread.php?t=347705
You will need to install Rotate Screen.cab (or Rotate Screen CW.cab) 1st
The Rotate Screen CW.cab is for counterclockwise rotation.
For me it's working great. When I hold the "call" button for some time the screen rotates.
did anyone install AEbuttons on the HD2
it works wonderfully on X1, HD1, diamond 2. it can assign 4 programs or functions to each button and that includes the volume buttons
htc-hd2 said:
Did you use THIS Rotate Screen with the shortcut link?
http://forum.xda-developers.com/showthread.php?t=347705
You will need to install Rotate Screen.cab (or Rotate Screen CW.cab) 1st
The Rotate Screen CW.cab is for counterclockwise rotation.
For me it's working great. When I hold the "call" button for some time the screen rotates.
Click to expand...
Click to collapse
Okay, so I used that rotate screen cab, installed it, found the shortcut it created in windows/start menu/programs and copied it. Then, I pasted a shortcut to it in the windows directory, and renamed that shortcut long_send.lnk. Then restarted.
Still doesn't work. When i run the shortcut directly in the windows directory, the screen rotates. When I run the 'Rotate' shortcut from the Start menu, the screen rotates. When I long press the send button, the screen does not rotate. Am I missing a step?
Not sure what you call the "send" button.
It's the most left button on the bottom that you need to press for about 3 to 4 seconds.
One more thing..
The "long_send.lnk" should be in the Windows directory.
htc-hd2 said:
Not sure what you call the "send" button.
It's the most left button on the bottom that you need to press for about 3 to 4 seconds.
Click to expand...
Click to collapse
Yes, the button on the bottom left - the one that if you press and release takes you to the phone screen. At any rate, I can't get it to work the way that has been described. Any suggestions?
I just did this and works realy good.
Thanks for the great tip.
htc-hd2 said:
One more thing..
The "long_send.lnk" should be in the Windows directory.
Click to expand...
Click to collapse
Yes, as i mentioned, I put the 'long_send.lnk' shortcut in the Windows directory. Have tried and retried this about a dozen times now. Still no joy.
Not sure about rotate.exe, but FWIW, Gyrator 2 works fine and is customizable based on apps.
robertlewisca said:
Yes, as i mentioned, I put the 'long_send.lnk' shortcut in the Windows directory. Have tried and retried this about a dozen times now. Still no joy.
Click to expand...
Click to collapse
Okay, I FINALLY figured it out, and I'll post what happened just in case anyone else runs into the same issue.
I followed the instructions as posted and changed the name of the shortcut to Long_Send.lnk and put it in the Windows directory. However, apparently when you use the Rename function, it just allows you to rename the file and not the extension. It doesn't indicate this anywhere, so I thought I was renaming both the file name and the extension. So, when I renamed to Long_Send.lnk, what I must have in reality been doing was renaming it to Long_Send.lnk.lnk - and therefore it didn't work.
Once it dawned on me that this might be the case, I renamed the shortcut again, this time without adding the extension at the end (Long_Send), and voila - it worked.
Never had to rename a file in WinMo before, so I was unaware that the Rename function only renames the file name, and not the file extension.
FYI, you can remap most (if not all) hardware buttons with the .lnk hack. Here's more information on how to do it.
Unlike programs like AEButton Plus, it will only allow you to assign short and long keypresses (no double- and triple-presses), but won't consume any system resources, won't be draining your battery, won't conflict with any other software that uses keyboard hooks.
Use it with caution though.
I missed it - does aebutton work? How about the utility like this one: http://forum.xda-developers.com/showthread.php?t=256525
I could have sworn I saw one specifically for HTC phones to remap the volume. It was something like vol up = dpad up, hold up for dpad left...etc.
I never use the volume controls on my current phone (Advantage 7501), and I'm expecting to be able to use vol up/down as dpad up/down for scrolling list and most importantly next page in reading a book!
polstein said:
I could have sworn I saw one specifically for HTC phones to remap the volume. It was something like vol up = dpad up, hold up for dpad left...etc.
Click to expand...
Click to collapse
This is the one you mean: http://forum.xda-developers.com/showthread.php?t=552947. Haven't tried it yet.
The, Does anyone know how to [insert subject here ] Thread.
Hi folks, since Win 8 is starting to get a bit more popular with the locals and there are already dozens of posts on similar things I figured id start a new one that we can use for general help related questions so we don't bog down the board too much, perhaps it wont work or is a waste of time, Ill try keep on top of all the questions and answers and will stick a link to the person who answers the question first so they can get the credit
This isn't a place to get in to the right or wrongs of Windows 8, there are already a couple of other threads for that.
Nope, this is a place to ask; How do to do something, Where to find something, can we do this that or the other, that kind of thing
Remember if someone helps you out don't forget the thanks button! It costs you nothing an gives them a wee pat on the back for their trouble, To find the original author please visit the links if they are available , they may have more detailed info and screen shots to help you.
If this gets bigger ill try and divide it in to sections or group similar questions together.
Q1, How to change the volume on the music app?
A, You cant currently change the volume independent from the system volume
Here and Here
Q2, Where can I find my start Menu? and Do I need to pin shortcuts everywhere?
A, All your legacy start menu entries can be found by right clicking in a non-tiled area and pressing All Apps, you don't need to pin any of the internally used Start Menu folders to your taskbar or such.
Here
Q3, How do I shut down my Computer?
A, Shutdown is found by pressing either WIN+I or by holding your mouse in the upper or lower right hand corner of the screen, then pressing settings on the Charm Bar. Click power and choose what you want.
Here
Q4, Where can I find the old run / search command box?
A,You can open the run window by pressing WIN+R or by holding your mouse in the lower-left corner of the screen and right clicking, then click Run. Search can be found on the Charm bar on the right side, by simply typing in the relevant screen or by pressing WIN+F for files or WIN+Q for apps, WIN+W for settings
Here
Q5, Where can I find the control panel settings and other power user commands?
5.You can also open Control Panel by right clicking the Start Hot-Corner overlay and clicking Control Panel. (This is the Desktop version of Control Panel, not the PC Settings app accessible in the Settings Menu on the Charms bar.)
Here
Q6, Were are all the settings for my apps, I cant find any way of changing things in my apps?
A, Many of the settings within metro and for metro apps can be found by opening the Charm Bar on the right hand side by moving your mouse to the top or bottom right corner of the screen. Some settings and options can also be found in the options bar at the bottom by right clicking on any blank space within Metro or a Metro app.
Here
So in the interest of kick starting this off heres my Question
Does anyone know if theres a way to change the volume within the music app?, I cant see it in audio mixer either so have I missed something?
Scroll to the right of your screen and open the settings wheel, from there is a system volume slider.
The following isn't a question but a possible answer for a future question:
To run a program as administrator you must search for the program via metro and then right click it and the option will be there.
NastyNasdaq said:
Scroll to the right of your screen and open the settings wheel, from there is a system volume slider.
The following isn't a question but a possible answer for a future question:
To run a program as administrator you must search for the program via metro and then right click it and the option will be there.
Click to expand...
Click to collapse
ah but that changes the overall system volume, so yes it does work, but it effects everything, its also a backwards way of doing it, (action>click>click>adjust) Seems a tad long winded for a simple up down volume command,
thanks for your reply and tip
dazza9075 said:
So in the interest of kick starting this off heres my Question
Does anyone know if theres a way to change the volume within the music app?, I cant see it in audio mixer either so have I missed something?
Click to expand...
Click to collapse
NastyNasdaq said:
Scroll to the right of your screen and open the settings wheel, from there is a system volume slider.
Click to expand...
Click to collapse
I think what dazza wants to have is a volume seperatly for the music app and at the moment this is not built in. You have to use the system volume (like Nasdaq said or just in case you have volume +/- on your keyboard with these).
I'm not quiet sure if in any metro app out there today you can change the volume (except some that are playing i.e. youtube videos, cause the youtube player can do that).
dazza9075 said:
ah but that changes the overall system volume, so yes it does work, but it effects everything, its also a backwards way of doing it, (action>click>click>adjust) Seems a tad long winded for a simple up down volume command,
thanks for your reply and tip
Click to expand...
Click to collapse
No problem. Its the only way I know about adjusting the volume at the moment.
NastyNasdaq said:
To run a program as administrator you must search for the program via metro and then right click it and the option will be there.
Click to expand...
Click to collapse
If it's on your desktop or if your feeling complicated, you can always right click the program's executable and press Run As Administrator. Or if your scrolling through the Start Menu entries using the tip below, you can right click and the option will be there too
For future references: (I'll be updating this post with more.)
All your legacy start menu entries can be found by right clicking in a non-tiled area and pressing All Apps.
As per previous versions of Windows, all your start menu groups and shortcuts can be found on the previously mentioned All Apps page. (Your start menu is still there, you don't need to pin any of the internally used Start Menu folders to your taskbar or such.)
Shutdown is found by pressing either WIN+I or by holding your mouse in the upper-right hand corner of the screen, then pressing settings on the Charm Bar. Click power and choose what you want.
You can open the run window by pressing WIN+R or by holding your mouse in the lower-left corner of the screen and right clicking, then click Run.
You can also open Control Panel by right clicking the Start Hot-Corner overlay and clicking Control Panel. (This is the Desktop version of Control Panel, not the PC Settings app accessible in the Settings Menu on the Charms bar.)
EDIT: If you want, I can make a screenshot that shows what I mean for others.
BTW, This thread should be stickied once we get enough information. I think it's a good idea. Also I think Metro Apps are exempt from the mixer. So I'm not sure that there is a way to change the volume in any of them unless the App gives it's own soft-volume control.
ShadowEO said:
If it's on your desktop or if your feeling complicated, you can always right click the program's executable and press Run As Administrator. Or if your scrolling through the Start Menu entries using the tip below, you can right click and the option will be there too
For future references: (I'll be updating this post with more.)
All your legacy start menu entries can be found by right clicking in a non-tiled area and pressing All Apps.
As per previous versions of Windows, all your start menu groups and shortcuts can be found on the previously mentioned All Apps page. (Your start menu is still there, you don't need to pin any of the internally used Start Menu folders to your taskbar or such.)
Shutdown is found by pressing either WIN+I or by holding your mouse in the upper-right hand corner of the screen, then pressing settings on the Charm Bar. Click power and choose what you want.
You can open the run window by pressing WIN+R or by holding your mouse in the lower-left corner of the screen and right clicking, then click Run.
You can also open Control Panel by right clicking the Start Hot-Corner overlay and clicking Control Panel. (This is the Desktop version of Control Panel, not the PC Settings app accessible in the Settings Menu on the Charms bar.)
EDIT: If you want, I can make a screenshot that shows what I mean for others.
BTW, This thread should be stickied once we get enough information. I think it's a good idea. Also I think Metro Apps are exempt from the mixer. So I'm not sure that there is a way to change the volume in any of them unless the App gives it's own soft-volume control.
Click to expand...
Click to collapse
Also in all Metro apps:
Right click in dead space (empty) and a menu will post at the bottom of the app with options/buttons. Right click again to dismiss if not needed.
Moving mouse to upper right in all metro apps just as on START will bring up the settings and preferences for each. This will contain some common preference options too.
Moving the mouse to the left side will bring up the task bar to close apps and for switching.
All WIN-(key) shortcuts still work as before, as some listed above.
Same with command line as well. (admins and power users =])
ShadowEO said:
If it's on your desktop or if your feeling complicated, you can always right click the program's executable and press Run As Administrator. Or if your scrolling through the Start Menu entries using the tip below, you can right click and the option will be there too
For future references: (I'll be updating this post with more.)
All your legacy start menu entries can be found by right clicking in a non-tiled area and pressing All Apps.
As per previous versions of Windows, all your start menu groups and shortcuts can be found on the previously mentioned All Apps page. (Your start menu is still there, you don't need to pin any of the internally used Start Menu folders to your taskbar or such.)
Shutdown is found by pressing either WIN+I or by holding your mouse in the upper-right hand corner of the screen, then pressing settings on the Charm Bar. Click power and choose what you want.
You can open the run window by pressing WIN+R or by holding your mouse in the lower-left corner of the screen and right clicking, then click Run.
You can also open Control Panel by right clicking the Start Hot-Corner overlay and clicking Control Panel. (This is the Desktop version of Control Panel, not the PC Settings app accessible in the Settings Menu on the Charms bar.)
EDIT: If you want, I can make a screenshot that shows what I mean for others.
BTW, This thread should be stickied once we get enough information. I think it's a good idea. Also I think Metro Apps are exempt from the mixer. So I'm not sure that there is a way to change the volume in any of them unless the App gives it's own soft-volume control.
Click to expand...
Click to collapse
feel free to put screen shots up, ive linked in to your posts so if you want to provide supporting information then all the better ill not put them in the first post tho to keep it simple.
How do you pin apps to desktop taskbar?
OptimusLove said:
How do you pin apps to desktop taskbar?
Click to expand...
Click to collapse
right click app >pin to taskbar.
Does anyone know how to show up the Media Apps controls in desktop mode without pressing the media keys? When the media app plays music (and consumes around of 300MB RAM btw.) and you are in the desktop view you can press the volume keys on your keyboard to bring up a mini player that shows the current track and allows to play/skip/rewind/etc.. Is there a mouse way (or keyboard shortcut) to bring this up without the media keys?
mcosmin222 said:
right click app >pin to taskbar.
Click to expand...
Click to collapse
but that doesn't allow you to pin "apps" specifically metro apps, it just lets you pin desktop programs.
dazza9075 said:
but that doesn't allow you to pin "apps" specifically metro apps, it just lets you pin desktop programs.
Click to expand...
Click to collapse
So far I know it's not possible to pin metro apps to the desktop taskbar.
ChrisKringel said:
Does anyone know how to show up the Media Apps controls in desktop mode without pressing the media keys? When the media app plays music (and consumes around of 300MB RAM btw.) and you are in the desktop view you can press the volume keys on your keyboard to bring up a mini player that shows the current track and allows to play/skip/rewind/etc.. Is there a mouse way (or keyboard shortcut) to bring this up without the media keys?
Click to expand...
Click to collapse
Would be interesting to know if there's a way, but I haven't found one (and doubt there's one ^^ )
dazza9075 said:
but that doesn't allow you to pin "apps" specifically metro apps, it just lets you pin desktop programs.
Click to expand...
Click to collapse
Sorry, didn't know you were asking about "specific" metro apps.
So far, this isn't supported. YET. Remember this is still beta. The problem will probably be fixed in the future.
Anyone know if pressing the Metro App Bar "Uninstall" button uninstalls non-metro programs if you press it on one?
Also if your in a metro app while Music is doing it's thing and you open the app bar, there's music controls there too.
Sent from my LG-LS670 using XDA
ShadowEO said:
Anyone know if pressing the Metro App Bar "Uninstall" button uninstalls non-metro programs if you press it on one?
Also if your in a metro app while Music is doing it's thing and you open the app bar, there's music controls there too.
Sent from my LG-LS670 using XDA
Click to expand...
Click to collapse
Uninstall button on a non-metro program seems to bring up add remove programs
So I got my Nexus 7, and think its awesome! I got mine so I can install it in the dashboard of my car to use as media player/navigation, all that good stuff.
I thought it would be great to use a bluetooth media remote attached to the steering wheel to control basic functions. I purchased the Satechi Media Remote, and for the most part it works perfect! There is only one main issue and one minor issue.
Main Issue:
The remote has a button on the bottom middle that has a square on it. It works just like pushing the Home button.
While it is in my dashboard, it will be rare that I need to go to the actual home screen, and instead i would like it to take me to the car dock app I use. I have been trying many things to get it to work and I can not get it to function as anything else!
I tried using the app "External Keyboard Helper" and it worked for remapping the other 2 lower buttons on the remote (which is part of question 2), but I can not get it to remap the middle button. When I use the degugger in External keyboard helper, if I push that button it doesnt log the keypress and goes to the home screen like it is supposed to. I tried manually setting the keycode (102) to run an app and it still just goes to the home screen.
The next thing I tried was to edit the actual keylayout files like what is outlined here:
http://forum.xda-developers.com/showthread.php?t=695936
Doing it this way I can not seem to get it to change any of the three buttons to anything else. At first I couldnt figure out which .kl file to edit, so I searched and replaced all instances of HOME and MOVE_HOME in all the files, and moved them back to the device, still no change.
Do I need to make a cutom .kl with the vendor name and id in the title?
Where do I get that information from?
I tried editing the file Vendor_05ac_Product_0239.kl since in its comments it says its for a "Apple Wireless Keyboard", which this device is supposed to emulate to work with ipods/ipads, still nothing.
I am at my witts end trying to find the right way to remap this one button on this little remote hahaha
The second issue which is very minor, which might not be solved in here. I want to map one of those other lower buttons to google voice search. When I run the setup for "External Keyboard Helper" it has a section for mapping the running of an app to a key, which worked for car dock and a car music player. The problem is, when I go to the Application shortcuts portion of the app, the only thing I see listed in there is "com.google.android.voicesearch". If I set that as the app to run when I press a key I see this..
"com.google.android.voicesearch is not installed"
Is there a way to launch google voice search without having to click on the microphone in the search bar?
I got the thing working! I had to make a new KL file for the "keyboard"
I found this thread that told me how to get the vendor and product id, that seemed to be what was missing.
http://www.thriveforums.org/forum/toshiba-thrive-development/9626-how-create-customized-keylayout-any-usb-bluetooth-keyboard-rooted.html
The file name needs to match those.. its information is
Vendor ID 05ac
Product ID 023c
so the kl file is named
Vendor_05ac_Product_023c.kl
The scan codes for the three lower buttons are
161 (bottom left with the keyboard logo)
172 (middle bottom with the square)
113 (bottom right with the mute logo)
I changed the one for the bottom middle to SEARCH, and from that point on I could remap the key with the app External Keyboard Helper.
Next thing I need to do is figure out how to run a app from a keypress without using that remapper.. and how to start google search from a keypress
ShreddinPB said:
I got the thing working! I had to make a new KL file for the "keyboard"
I found this thread that told me how to get the vendor and product id, that seemed to be what was missing.
http://www.thriveforums.org/forum/toshiba-thrive-development/9626-how-create-customized-keylayout-any-usb-bluetooth-keyboard-rooted.html
The file name needs to match those.. its information is
Vendor ID 05ac
Product ID 023c
so the kl file is named
Vendor_05ac_Product_023c.kl
The scan codes for the three lower buttons are
161 (bottom left with the keyboard logo)
172 (middle bottom with the square)
113 (bottom right with the mute logo)
I changed the one for the bottom middle to SEARCH, and from that point on I could remap the key with the app External Keyboard Helper.
Next thing I need to do is figure out how to run a app from a keypress without using that remapper.. and how to start google search from a keypress
Click to expand...
Click to collapse
have you made any progress on this? i'm interested in this as well...
I got one of these remotes as well to use as a music/gps remote in my vehicle mounted Nexus 7. It works well, but let's hope a smart developer will make a better "external keyboard helper".
Hi can someone share his .kl file.
The Satechi device doesn't work at all with my MK888b box.
Interesting in this too
Sent from my Nexus 5 using XDA Premium 4 mobile app
Know this is an old post, but this helped me immensely. Got a Satechi remote and this quick tutorial helped me a ton. Seemed a little pain in the ass-ish at first, but realistically only took 5 minutes to get situated. Now to figure out how to bind a key to a specific app.
You probably don't even have this device anymore, if you change the keycode for whatever button you want to have open Google search to look like
key XXX VOICE_ASSIST
It'll open up Google voice search for you.
Trying to modify the SystemUI.apk (or Framework-res.apk) with the idea of hiding the Google button from the recent app panel - "status_bar_recent_launch_google_button". (long press Home button > Recent > Google Search button - bottom, middle)
Can anybody point me the right xml file(s) and the right modifications? I've been trying to figure it out for quite some time but what confuses the hack out of me is the fact that both "tw_status_bar_recent_panel.xml" files (in res > layout and layout-land) already have the original status as "android:visibility="gone" - although the Google button is there and very visible. Actually all three buttons originally have the visibility set to "gone", yet they all show???? I must be looking in the wrong place!!
I know the option is available in NottachXposed but this is part of a personal project so I would appreciate answering only in the direction I'm asking, without suggesting alternatives.
Thanks a lot.
While transitioning some old Apps (FuelLog Pro) from my other Android phones onto my S6 Edge, I discovered that some of the apps needed to use a 'menu' key to backup/export. Obviously no way to add a menu softkey without root, SO I figured out how to do it from ADB.
Once you connect your phone to ADB enter the following command for the 'menu' softkey:
Code:
adb shell input keyevent 82
The 'keyevent' relates to various keymappings, annoyingly, the keymappings for the Samsung are a little different from standard Android, which is why I'm making a record of it here.
So far it looks like HOME, BACK, CALL, and Volume follow standard keymappings. I'll update this list if I spend more time digging and find other differences.
You can find the complete list here:
http://developer.android.com/reference/android/view/KeyEvent.html
This is super useful for running batch commands on Apps from the computer as well.
Use wisely.
Thanks, can we replace the long press on the recent apps button from dual windows to menu key?
I really don't understand where the problem is with just pressing the menu overlay button?
For old Apps without the new Material UI I always get a round overlay button which is acting as a Menu button.
The new one don't have these as they integrate this button themself.
I have not found any app yet where I'm not able to open the menu.
There is no way (as far as I know) but also no need to replace the long press with the menu button.
Menu button is not needed anymore.
I have several apps that don't have the round overlay Menu button (including the aforementioned app, FuellogPro). Mostly it is apps that were written about 2 years ago that got stuck between KitKat and JB. I have quite a few paid apps, so I keep using them (and modifying them) even after support has ended.
You can only reassign the button to 'menu' if you have root.