Database Users

Odd unit (help identify pls)

i have just purchased my first 'android' head unit for my car
now this is a right hand drive 2004 honda accord v6 and its heating and ac controls are integrated into the unit and you bring them up by pressing a small icon that is constantly on top of all windows
what annoys me is the car is right hand drive and the controls are backwards for left hand drive vehicles and i have tried to work it out in the settings but i can't there is no 'rudder' or anything
also when the driver door opens it shows the passenger and vice versa.
any hacks, mods to make it smoother would be greatly appreciated
i can't include pics due to only being new but the details are
OS: VTCOS-R v1.10.40(20160808152047)
MCU:SMNDT-2016-07-26-M0000-00-PX3-R6621-WQ4
Model number : R8188-BZ-EN (4 CORE)
ANDROID VERSION: 5.1.1
KERNAL VERSION 3.0.36+
SCREEN 1024 X 600
BUILD NUMBER: VTCOS-R v1.10.40(20160808152047)

Did you ever find any updates thanks

A-Sure Android 8.0 problems with ignition and steering wheel control

Hello together!
First of all, I'm totally new into Android Head Units so I don't really have a clue about the different versions etc. Also, I am an iPhone user since almost ten years, so I'm also kind of new to Android
I bought a 9 inch Head Unit with the stated down Specs for my Seat Leon (VW Family) which I directly connected via the original CAN BUS to the radio. It runs just perfectly, except for the following two really annoying problems:
1. The radio ignores the ignition. When I turn on/off the ignition (start/stop the car), nothing happens to the radio. I can normally turn on/off the radio, but the ignition has no effect on the radio - the radio just ignores it.
2. The steering wheel setup doesn't work. In general, the volume up/down, next/previous and phone button works by default, but when I enter the setting for the steering wheel and reset the defaults, the radio doesn't recognize the entries ( I would like to change some buttons).
Does anyone have and idea how to solve this? Are there other apps that can control these settins?
Generel questions: Is there a custom ROM available for this Head Unit? If I can't solve the issue, I would probably send it back and would buy a similar one from another manufacturer. Is there a brand where there are a lot of custom ROMs? Or is it all the same?
Sorry for these beginner questions, but I wasn't able to find real answers to these questions :
Thank you in advance!
Modell: PX5
Android Version: 8.0.0
Kernel Version: 4.4.93+
Build Number: px5-userdebug 8.0.0 OPR5....
MCU version: MTCE_LM_V2.75_1
CPU: 8 core 64-bit CPU Coretex-A53 @ 1.5G
Memory: 3891 MB

I've got quite similar problem in my peugeot 508 - 2012. My head unit is:
Android 8
px5-userdebug 8.0.0 OPR5.170623.007 eng.hct.20180321.165038 test-keys
MCU version: MTCE_MX2_V2.83_1
Kernel Version: 4.4.93+
with canbus:
MH (PA-SS-05)20180402
SS-PA0503271018-2
For: Peugeot 2008
P/N 1801300412
Software: PSA V2.27 005BYPS
I have no control over steering wheel at all...and all rest that supposed to be decoded by canbus decoder. In my case I had to connect power line, in the way that bypasses canbus, otherwise I cannot even boot up the device. I don't know if updating MCU would help. My device is brand new with stock MCU updated to 26 of April 2018. I thought that maybe downgrade would be a solution but I've got no control over my device to enter into a recovery mode, so I don't want to brick my HU completely.

Hello friend
See my answers below your questions
erdloch said:
Hello together!
First of all, I'm totally new into Android Head Units so I don't really have a clue about the different versions etc. Also, I am an iPhone user since almost ten years, so I'm also kind of new to Android
I bought a 9 inch Head Unit with the stated down Specs for my Seat Leon (VW Family) which I directly connected via the original CAN BUS to the radio. It runs just perfectly, except for the following two really annoying problems:
1. The radio ignores the ignition. When I turn on/off the ignition (start/stop the car), nothing happens to the radio. I can normally turn on/off the radio, but the ignition has no effect on the radio - the radio just ignores it.
Does it turn off when open the driver door?
2. The steering wheel setup doesn't work. In general, the volume up/down, next/previous and phone button works by default, but when I enter the setting for the steering wheel and reset the defaults, the radio doesn't recognize the entries ( I would like to change some buttons).
No you can not change the function of each button because the head unit takes the commands ready from the can bus module. If you want to make your differences then you must cancel the can bus module and an additional interface that makes the can bus , into resistive commands
Does anyone have and idea how to solve this? Are there other apps that can control these settins?
Generel questions: Is there a custom ROM available for this Head Unit? If I can't solve the issue, I would probably send it back and would buy a similar one from another manufacturer. Is there a brand where there are a lot of custom ROMs? Or is it all the same?
Sorry for these beginner questions, but I wasn't able to find real answers to these questions :
Thank you in advance!
Modell: PX5
Android Version: 8.0.0
Kernel Version: 4.4.93+
Build Number: px5-userdebug 8.0.0 OPR5....
MCU version: MTCE_LM_V2.75_1
CPU: 8 core 64-bit CPU Coretex-A53 @ 1.5G
Memory: 3891 MB
Click to expand...
Click to collapse

bioukanon said:
Hello friend
See my answers below your questions
Click to expand...
Click to collapse
have the problemm solved?
have no function of the control over steering wheel.

sasa321 said:
have the problemm solved?
have no function of the control over steering wheel.
Click to expand...
Click to collapse
Solved if you use an FYT based unit.
https://forum.xda-developers.com/an...zlink-carplay-steering-wheel-control-t3815219

EINCAR head unit firmware

Hi all,
Just recently purchased this unit: EINCAR Android 10 single din (Model no on the box is HTT-AD9505) I would post a link but can't due to my post count!
The sole purpose of having the unit is for me to be able to view live data from my ECU via an app connected to the bluetooth module on the ECU. My issue is that I can only seem to connect to phones. The settings don't have the usual bluetooth settings options I am used to seeing in android settings, the only place you can access anything bluetooth related is in the units music or phone app. Is this likely to be by design with the firmware? Can I change the firmware to something different that can attach to any old bluetooth device?
The units about device page has the following info:
Android Version: 10
Hardware Info: Quad Core AllWinner - ROM 32GB - DDR3 1GB - 1024x600 - b2
Kernel Version: Linux 3.10.65 - Wed Jan 8 111:19:29 CST 2020
OS Version: HTTC0101-N78-2.4.4.3.12 - IVT - 200108
MCU Version: STM8-20200316-74-HHT-32
BT Version: 3A03
The app I am using is VEMs Display (vems.hu/android/) and the bluetooth device is communicating serial over bluetooth.
Thanks in advance for any help

After trying to install and run Bluetooth scanners, I now realize that the unit is blocking anything that isn’t the pre-installed bloatware from accessing Bluetooth. I now feel I have a giant paper weight!

hrsteel said:
After trying to install and run Bluetooth scanners, I now realize that the unit is blocking anything that isn’t the pre-installed bloatware from accessing Bluetooth. I now feel I have a giant paper weight!
Click to expand...
Click to collapse
we have same situation with same car radio and same BT problem, i ask everywhere without a valid answer.
maybe the only difference from us are:
2gb/32gb (instead 1/32in your device)
mcu: stm8-2019 (instead your 2020 in your device)
and maybe something else
https://forum.xda-developers.com/an...nknown-devices-mcu-bluetooth-problem-t4137941

I need Rom PX6 (file px6.zip) for BMW E60 CCC android 8.1 , Rk3399 , 2G ram ,32G rom

Hello . I am looking for software for my BMW CCC Android 8.1 2G Ram 32G Rom radio. Currently, the radio has been loaded with bad software from the link (updates via USB have gone wrong), which means that the image is currently cut off and is a side. It is possible to approve the update despite this defect, but unfortunately I can not find the software anywhere. The problem generally started with Factory settings after which there was no additional options after entering the code 1314 in the CAR TYPE tab, resolution settings for the CCC PROFESJONAL radio (I have a clipped image in the original menu CCC).
I do not have information about the manufacturer in the box, but after viewing all the radios, in my opinion it is a SEICANE product. In a movie on YT, the guy shows the assembly of his radio and after watching I'm 90% the same. The box, the holes on the sides of the screen, the location of the connectors on the back and 10pin on the side. The radio has the same interface, at least as I see the ID6 overlay with identically arranged applications.
I am writing with Seicane via Messenger, but at the moment everything is done and nothing is back. Before I uploaded this software, I took the original shot.
The radio only sees the update as px6.zip from usb.
I am asking forum members for help
Name device : rkpx6
MCUVer: 615043bALS-CCC-HW8-190525(B1280_170325)
FrameworkVer: 8.1.0 OPM5.171019.019 eng.zxw.20190520.182151
AndroidVer : 8.1.0
APPVer : 2019061101_1280x480_970
Nandflash: 10,39G/24,83G
RAM : 2G
UUID : 010E6A88-3BFD-00B6-0000-000100001A88

pyxu_custom said:
Hello . I am looking for software for my BMW CCC Android 8.1 2G Ram 32G Rom radio. Currently, the radio has been loaded with bad software from the link (updates via USB have gone wrong), which means that the image is currently cut off and is a side. It is possible to approve the update despite this defect, but unfortunately I can not find the software anywhere. The problem generally started with Factory settings after which there was no additional options after entering the code 1314 in the CAR TYPE tab, resolution settings for the CCC PROFESJONAL radio (I have a clipped image in the original menu CCC).
I do not have information about the manufacturer in the box, but after viewing all the radios, in my opinion it is a SEICANE product. In a movie on YT, the guy shows the assembly of his radio and after watching I'm 90% the same. The box, the holes on the sides of the screen, the location of the connectors on the back and 10pin on the side. The radio has the same interface, at least as I see the ID6 overlay with identically arranged applications.
I am writing with Seicane via Messenger, but at the moment everything is done and nothing is back. Before I uploaded this software, I took the original shot.
The radio only sees the update as px6.zip from usb.
I am asking forum members for help
Name device : rkpx6
MCUVer: 615043bALS-CCC-HW8-190525(B1280_170325)
FrameworkVer: 8.1.0 OPM5.171019.019 eng.zxw.20190520.182151
AndroidVer : 8.1.0
APPVer : 2019061101_1280x480_970
Nandflash: 10,39G/24,83G
RAM : 2G
UUID : 010E6A88-3BFD-00B6-0000-000100001A88
Click to expand...
Click to collapse
Ever found the firmware? I am also looking for this.

I have the same unit everything is fine, it is stuck in the android logo does anyone know how I can do a hard reset please ,,, thanks

Help with newest Android multimedia for Honda Accord 7th (2003)

Hello all,
I am new here and came to ask you for some help with my new TS18 head unit. I could not find the right model but here is the serial number i found: 3t101003
I bought android multimedia for honda accord 7th generation with these characteristincs:
- Platform information: TS18
- CPU: UIS8581A (8x1.6 GHz)
- MCU version: Ts10-1.1.100-10-A49889-220511 (GD330)
- System version: TS18-2.2_20220412.183840_WINDOW_THEME1
- Resolution: 1280x720
- CarSetting version: V1.0.0.20220330
- Android version: 11
The problem is that I cant see my AC information of the screen. Already tried everything that I found here and in other forums and videos (swiping wires or choose settings) but it still don't work. Actually when I am trying to save the model select settings i get the error message "This model is not MCU". I am attaching a photo of the error. Do you ever seen that before for these chinise head units?
I am not sure if this is important but originally the car had honda navigation system and it was with dual climate zone controll.

Vasskoss said:
Hello all,
I am new here and came to ask you for some help with my new TS18 head unit. I could not find the right model but here is the serial number i found: 3t101003
I bought android multimedia for honda accord 7th generation with these characteristincs:
- Platform information: TS18
- CPU: UIS8581A (8x1.6 GHz)
- MCU version: Ts10-1.1.100-10-A49889-220511 (GD330)
- System version: TS18-2.2_20220412.183840_WINDOW_THEME1
- Resolution: 1280x720
- CarSetting version: V1.0.0.20220330
- Android version: 11
The problem is that I cant see my AC information of the screen. Already tried everything that I found here and in other forums and videos (swiping wires or choose settings) but it still don't work. Actually when I am trying to save the model select settings i get the error message "This model is not MCU". I am attaching a photo of the error. Do you ever seen that before for these chinise head units?
I am not sure if this is important but originally the car had honda navigation system and it was with dual climate zone controll.
Click to expand...
Click to collapse
Check the CANbox settings in the settings menu.

rigattoni said:
Check the CANbox settings in the settings menu.
Click to expand...
Click to collapse
I tired from Factory Settings -> Select Model and select all Honda accords I found but every time this is the result.
Are there an additional CANbox settings somewhere?

Vasskoss said:
I tired from Factory Settings -> Select Model and select all Honda accords I found but every time this is the result.
Are there an additional CANbox settings somewhere?
Click to expand...
Click to collapse
If the CAN-box does not support your AC settings, you will not be able to get it working.
May be wrong CAN-Box. Ask the seller for sending the right one for your specific car.
...and may be your head unit is not able to get the information from the CAN. Ask the seller, no one can help here.

Thank you for the help, I will investigate with the seller and update the post after I have some news.