Related
I work at a shop and someone brought me a Yoga Tab 3 8" tablet that was on a screen that asked for an original google account.
It was purchased without much thought because i figured it was just part of the setup.
No this is actually a Device Protection feature google has had since Lollipop apparently.
There is a way around it if anyone is interested or is in a soft brick that they can access the recovery from.
NOTE :
THIS IS FOR THE YOGA TAB 3 8" YT3-850F ONLY!!!!! I AM NOT RESPONSIBLE IF YOU DESTROY YOUR TABLET! PLEASE BE CAREFUL. DO NOT FLASH ANYTHING FOR WRONG MODEL. CONFIRM YOUR MODEL NUMBER BY LOOKING ON THE BACK STICKER BEFORE PROCEEDING.
You will need :
A Computer
A Micro SD Card and Adapter
A couple of hours time
Patience...
Patience........
Firstly, as always, make sure the device is charged before attempting any of this please.
Download the stock firmware from This Link.
Do not extract the firmware at all or rename it, just leave it as it is, it will take about an hour to download.
After you have the firmware downloaded move the zip file to the root of the MicroSD Card on the computer.
Eject the SDCard from the computer and put it into the Yoga Tab.
Reboot into recovery by pressing Power and Vol+ let go of Power when you see the Lenovo logo.
Once in recovery go ahead and do a factory reset/data wipe.
The next step is to actually flash the zip you put on the MicroSD earlier. You go down to apply update from SD using the Volume + and -
buttons. Power to select an option. Select the Zip you downloaded from this guide.
it will take approximately 20-30 minutes to fully install the update. after it installs it will boot up like new again, with no Google Device Protection, and it is a possible way to unbrick!
Hello, Where did you find this firmware? I'm looking for Lenovo Yoga Tab 3 YT3-X50F. Thanks
crucito said:
Hello, Where did you find this firmware? I'm looking for Lenovo Yoga Tab 3 YT3-X50F. Thanks
Click to expand...
Click to collapse
It looks like a modified package from China. I successfully installed the zip file. After rebooting, the version noted was YT3-X50F_S000022_150714_PRC (which I presumed to be People's Republic of China). The update zip does not contain any Google apps (including Play Store).
spunky168 said:
It looks like a modified package from China. I successfully installed the zip file. After rebooting, the version noted was YT3-X50F_S000022_150714_PRC (which I presumed to be People's Republic of China). The update zip does not contain any Google apps (including Play Store).
Click to expand...
Click to collapse
That's correct; but you can just flash the Gapps 5.1.1 ("mini" package) from Cyanogenmod (that's what I did); and then once you've got superSU installed, remove the non-North American "store" apps ^_^
crucito said:
Hello, Where did you find this firmware? I'm looking for Lenovo Yoga Tab 3 YT3-X50F. Thanks
Click to expand...
Click to collapse
on the lenovo support page...
Yes
metalchef said:
That's correct; but you can just flash the Gapps 5.1.1 ("mini" package) from Cyanogenmod (that's what I did); and then once you've got superSU installed, remove the non-North American "store" apps ^_^
Click to expand...
Click to collapse
Sorry for the delay in my response, but yes, this is correct. Just flash the Google apps and you will be good to go. I'm not sure where I found the firmware but there is a link there to the download. I'm pretty sure I just dug around google alot and found a post to the firmware somewhere else on XDA but to tell you the truth it was actually really difficult for me to get google apps installed and working properly and this firmware sometimes would not flash it would just sit there saying opening update.zip for hours. Good thing the battery life on that thing was amazing. :laugh:
metalchef said:
That's correct; but you can just flash the Gapps 5.1.1 ("mini" package) from Cyanogenmod (that's what I did); and then once you've got superSU installed, remove the non-North American "store" apps ^_^
Click to expand...
Click to collapse
Never mind
Does anyone have a fix if the tablet is stuck after a custom boot
does anyone know where to find Lenovo YT3 X50M stock rom? im looking for it for days, but no luck. can someone help me find one please. my tablet is softbrick right now
Yoga Tab 3 firmware legit download sites
PhidzkiDoo said:
does anyone know where to find Lenovo YT3 X50M stock rom? im looking for it for days, but no luck. can someone help me find one please. my tablet is softbrick right now
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=67534307&postcount=142
metalchef said:
That's correct; but you can just flash the Gapps 5.1.1 ("mini" package) from Cyanogenmod (that's what I did); and then once you've got superSU installed, remove the non-North American "store" apps ^_^
Click to expand...
Click to collapse
I got root on my device, but I don't know how to flash gapps on this device, because I don't have a custom recovery, can you pls help me?
alekzzone said:
I got root on my device, but I don't know how to flash gapps on this device, because I don't have a custom recovery, can you pls help me?
Click to expand...
Click to collapse
For several days straight I tried every method I could find on the internet to install Gapps on my YT3-850M without a custom recovery and every single attempt failed. I can do it without root but not without TWRP.
You don't happen to have the stock rom for yt3-x50f laying around?
Yoga tab 3 pro
Can please someone help me and direct me on right track. I have Yoga Tab 3 Pro but i bought it in China and all my apps and software is on China... is there a way for me to have english software and Google Store on it??? Pls if someone can just tell me where to start i payed a lot of money for it and i cant even use it properly...
stock
Anonymous629 said:
Does anyone have a fix if the tablet is stuck after a custom boot
Click to expand...
Click to collapse
If it is bootlooping just restore the stock firmware, surefire way to unbrick.
YES!
shile86 said:
Can please someone help me and direct me on right track. I have Yoga Tab 3 Pro but i bought it in China and all my apps and software is on China... is there a way for me to have english software and Google Store on it??? Pls if someone can just tell me where to start i payed a lot of money for it and i cant even use it properly...
Click to expand...
Click to collapse
What is the model number ? I can help you
Starting Point
JamesHasty said:
What is the model number ? I can help you
Click to expand...
Click to collapse
A good starting point for this is to look into rooting and get a custom recovery. Then you can flash zip files, such as google play store.
mathewcall said:
For several days straight I tried every method I could find on the internet to install Gapps on my YT3-850M without a custom recovery and every single attempt failed. I can do it without root but not without TWRP.
Click to expand...
Click to collapse
You can flash the TWRP for the x50M and then install google apps. The recovery will not stay - it will revert back to stop recovery. Search XDA for TWRP-2.8.7.7_YT3-X50M.zip
Recover, install recovery, root
BEFORE ANYTHING.... unlock your bootloader
Install Drivers for Lenovo Tablet, So Adb can see your device
Open your Adb Command Windows (windows)
Commands!
Adb Devices ------- this should return a device Id # ... if it doesn't your drivers are not correct ....
Adb Reboot bootloader -------- this Should take you to the Big Lenovo Screen (it will stay there, this is fastboot mode)
Fastboot Devices ------- This Should Return The Device Id (except fastboot Device Id #)
Fastboot Oem unlock-go ------- This Should Unlock Your bootloader (allow flashing of custom firmwares, boot images, recoverys etc) THIS WILL WIPE YOUR DEVICE!!!!!!!!!
After unlocking bootloader
Flash this Stock Firmware (if you haven't already)
This is FULL STOCK FIRMWARE ... not an OTA zip...
Downloads - Lenovo firmware YT3-850F | Easy Firmware
easy-firmware.com
Custom Built TWRP by Me... Enjoy
https://drive.google.com/file/d/0B1d...ew?usp=sharing
(this was based off the Twrp source that metalchef mentioned)
I recommend BOOTING it through fastboot if your only planning on flashing a few things and taking a single backup here and there... if you flash zips ALOT ... then just flash it ...
Fastboot Boot Recovery.img (this is the command you need inside of fastboot for booting recovery)
Fastboot flash recovery recovery.img (this is to flash recovery to tablet)
#Note# you need to put the recovery.img inside your adb folder... or drag and drop it to command window after typing "fastboot boot"
This will allow it to boot from any file path ....
To Gain Root ... Use Kingoroot , Un-intall the Superuser that kingoroot gives you ... get supersu (chainfire) from market and update the binary....
or flash supersu.zip through recovery
( I haven't tried to flash supersu because kingoroot worked) and ive exhausted so much time on the recovery ... im going to take a break ...
Afterwards .... You SHOULD have the device your seeking....
metalchef said:
That's correct; but you can just flash the Gapps 5.1.1 ("mini" package) from Cyanogenmod (that's what I did); and then once you've got superSU installed, remove the non-North American "store" apps ^_^
Click to expand...
Click to collapse
Hi Spungy168,
Please, how did you go about the flashing. Can you send me that tools & how? My tab Lenovo yoga 3 850F is bricked, please help?
Was able to port twrp recovery of blitz smartwatch after unpacking and replacing the kernel file with the lemfo lem5's stock kernel file extracted from unpacking stock recovery of lemfo lem5 and then repacking and flashing it to lemfo lem5. The recovery got successfully installed and all features are working except the recovery screen is flipped / inverted but not the touch response. The touch inputs are the same as non inverted screen and using the touch is pain in the a**s. If the touch input field is at 45 degrees then to access it, need to tap at 225 degrees and on the same radius distance. Can anyone let me know how to flip the recovery screen without affecting the touch fields or is there a similar custom recovery for mtk6580 lollipop smartwatch with flipped screen.
I have not found solution
Same problem with kw88h
And all twrp apk from playstore does not recognize as twrp
Recovery
Flashify can make the job
Only commands from adb... for wipe.
There is not enough space to backup or restore and i think only root and flasify is all you need.
geowolf1000 said:
I have not found solution
Same problem with kw88h
And all twrp apk from playstore does not recognize as twrp
Recovery
Flashify can make the job
Only commands from adb... For wipe
There is not enough space to backup or restore and i think only root is all you need
Click to expand...
Click to collapse
I have got everything working in twrp recovery. The flip recovery is no more a problem now as with some practice now I am comfortably able to use this inverted twrp touch with ease. It works like a charm and just like the official twrp recovery. No problems at all. Now everything is set : bootloader unlocked, rooted with latest binary supersu, custom twrp recovery installed. I also have the stock recovery img backup file, hence can switch back and forth between stock and custom recovery whenever required. No space issue on lemfo lem5 as it has 8gb rom. lastly only xposed installer is to be installed which is not much of a problem as they are available for lollipop with supported sdk and for which as of now I don't see the use of xposed installer right now, hence will install when required. If I am able to somehow flip the recovery screen then that's it! ?
Gautam_Gundap said:
I have got everything working in twrp recovery. The flip recovery is no more a problem now as with some practice now I am comfortably able to use this inverted twrp touch with ease. It works like a charm and just like the official twrp recovery. No problems at all. Now everything is set : bootloader unlocked, rooted with latest binary supersu, custom twrp recovery installed. I also have the stock recovery img backup file, hence can switch back and forth between stock and custom recovery whenever required. No space issue on lemfo lem5 as it has 8gb rom. lastly only xposed installer is to be installed which is not much of a problem as they are available for lollipop with supported sdk and for which as of now I don't see the use of xposed installer right now, hence will install when required. If I am able to somehow flip the recovery screen then that's it! ?
Click to expand...
Click to collapse
If your rom size is not sufficient enough for backup then you can create full rom backup on pc and can restore the same from pc when the need arises. There are software packages available for the same
geowolf1000 said:
I have not found solution
Same problem with kw88h
And all twrp apk from playstore does not recognize as twrp
Recovery
Flashify can make the job
Only commands from adb... for wipe.
There is not enough space to backup or restore and i think only root and flasify is all you need.
Click to expand...
Click to collapse
Gautam_Gundap said:
If your rom size is not sufficient enough for backup then you can create full rom backup on pc and can restore the same from pc when the need arises. There are software packages available for the same
Click to expand...
Click to collapse
I have with chainfire but never had any problem to recover
Thanks
Gautam_Gundap, fantastic work - You've beaten me to the punch as I had been messing with this device since yesterday (already fixed two bootloops I had induced myself -_- ) and I've been looking for a method for porting a TWRP img that wouldn't brick the LEM5.
Would you mind sharing the port? ..Despite the mirrored display/input issues you have so far, having any recovery method right now is very appealing to me considering the hell I had luckily sidestepped, and want to dig further into their stock images: if only to rebuild them with better icons for starters....
If not, can you just run me through your steps for full-backup, and your modification of TWRP for use with LEM5? I don't mind doing the legwork but would rather not walk this firepath alone!
(After 4 years, finally signed up and posted. Feels good to be here, guys! )
cassettesgoboom said:
Gautam_Gundap, fantastic work - You've beaten me to the punch as I had been messing with this device since yesterday (already fixed two bootloops I had induced myself -_- ) and I've been looking for a method for porting a TWRP img that wouldn't brick the LEM5.
Would you mind sharing the port? ..Despite the mirrored display/input issues you have so far, having any recovery method right now is very appealing to me considering the hell I had luckily sidestepped, and want to dig further into their stock images: if only to rebuild them with better icons for starters....
If not, can you just run me through your steps for full-backup, and your modification of TWRP for use with LEM5? I don't mind doing the legwork but would rather not walk this firepath alone!
(After 4 years, finally signed up and posted. Feels good to be here, guys! )
Click to expand...
Click to collapse
There are many advantages of twrp custom recovery, one of them being very fast full rom backup and even faster full rom restore and that too with compression, the pc whereas takes at least 10 times the time to do the same. full rom restore for me does it within 4mins and backup size of full compressed rom is only 1.64GB whereas the pc takes 7GB for the same backup. Needless to say about advantages of other features like customized wipe, flash image and zip files etc. Now for the procedure for porting twrp custom recovery is as follows
Download latest version of mtk extractor for PC. I tried all other methods, but only this one worked for me.
Download custom twrp recovery of blitz or i2 smartwatch which you will find in this forum.
You will require your stock recovery image file for this method. Your watch needs to be rooted to extract the same. Flashify app from playstore will do the job.
Connect watch to pc. Hope you know how to do this. rename stock recovery img to boot. Open mtk extractor and unpack this renamed file. You will find the unpacked files in mtk folder.
Cut these files and paste in a new folder stock recovery.
now rename the custom twrp recovery img you are going to port to boot.
Unpack it, the files will be placed in mtk folder.
Now copy kernel file from the stock recovery folder and paste it in the new unpacked files of ported twrp. PC Prompts replace - yes.
Now repack and you will get boot.img. Rename to recovery.img.
Flash this via fastboot or Flashify. Done. You have now successfully installed twrp recovery.
Note: In the mtk extractor software use the boot feature for all above steps.
If you encounter any problems post here and I will fix it.
To use pc for full rom backup and restore and many other features use cracked version of miracle box v2. 27A. Mtk Droid tools and SP flash tools do not support this watch, so don't waste time trying with it.
Xposed framework installed successfully!
Anyone need full power button menu for lemfo lem5 install advance power menu app from playstore. It works well. Once you long press the power button you get options for power off, reboot, download, recovery, UI restart , screen shot, soft reboot and safe mode reboot. Select floating mode from settings. looks and works nice on smart watch display
Gautam_Gundap said:
There are many advantages of twrp custom recovery, one of them being very fast full rom backup and even faster full rom restore and that too with compression, the pc whereas takes at least 10 times the time to do the same. full rom restore for me does it within 4mins and backup size of full compressed rom is only 1.64GB whereas the pc takes 7GB for the same backup. Needless to say about advantages of other features like customized wipe, flash image and zip files etc. Now for the procedure for porting twrp custom recovery is as follows
Download latest version of mtk extractor for PC. I tried all other methods, but only this one worked for me.
Download custom twrp recovery of blitz or i2 smartwatch which you will find in this forum.
You will require your stock recovery image file for this method. Your watch needs to be rooted to extract the same. Flashify app from playstore will do the job.
Connect watch to pc. Hope you know how to do this. rename stock recovery img to boot. Open mtk extractor and unpack this renamed file. You will find the unpacked files in mtk folder.
Cut these files and paste in a new folder stock recovery.
now rename the custom twrp recovery img you are going to port to boot.
Unpack it, the files will be placed in mtk folder.
Now copy kernel file from the stock recovery folder and paste it in the new unpacked files of ported twrp. PC Prompts replace - yes.
Now repack and you will get boot.img. Rename to recovery.img.
Flash this via fastboot or Flashify. Done. You have now successfully installed twrp recovery.
Note: In the mtk extractor software use the boot feature for all above steps.
If you encounter any problems post here and I will fix it.
Click to expand...
Click to collapse
Very cool - seems straightforward enough. I'll see if I can find something to fix up or workaround to get the rotation back while I'm at it. First thing's first is to give this a shot though. Need to get a windows machine so I'll get it going at work tomorrow!
Will update again soon. Thanks so much for the steps!
Hi guys.. root + twrp ok.. but there are Custom ROM with full smartwatch function (not only standalone)? Or the only one solution (partial solution) is M2D?
Well done! :laugh: I've configured Lem5 TWRP how u can see here:
https://forum.xda-developers.com/smartwatch/other-smartwatches/twrp-lemfo-lem-5-twrp-t3544569
I think/hope i've solved recovery flipped screen issue, because X5 TWRP haven't this problem.
X5 TWRP + Lem5 kernel = solution? I hope so!
If someone want try, please post the result. Thanx at all...!
Sent from my S7 Edge using XDA Labs
I'm trying to flash the recovery through fastboot and I'm getting:
C:\platform-tools>fastboot flash recovery recovery.img
target reported max download size of 134217728 bytes
sending 'recovery' (9676 KB)...
OKAY [ 0.366s]
writing 'recovery'...
FAILED (remote: download for partition 'recovery' is not allowed
)
finished. total time: 0.383s
I tried rooting with Kingroot and it really bloated up my device. Factory reset still keeps Kingroot, so I kinda want to start over fresh with TWRP and a clean image. How do you flash TWRP on this watch?
---------- Post added at 02:53 PM ---------- Previous post was at 02:39 PM ----------
Update: I made sure OEM unlock was checked in developer settings and eventually was able to flash TWRP via Fastboot.
My watch is now bootlooping over and over again in TWRP, says:
"Done processing script file, renamed stock recovery file in /system to prevent the stock ROM from replacing TWRP."
dimex said:
I'm trying to flash the recovery through fastboot and I'm getting:
C:\platform-tools>fastboot flash recovery recovery.img
target reported max download size of 134217728 bytes
sending 'recovery' (9676 KB)...
OKAY [ 0.366s]
writing 'recovery'...
FAILED (remote: download for partition 'recovery' is not allowed
)
finished. total time: 0.383s
I tried rooting with Kingroot and it really bloated up my device. Factory reset still keeps Kingroot, so I kinda want to start over fresh with TWRP and a clean image. How do you flash TWRP on this watch?
---------- Post added at 02:53 PM ---------- Previous post was at 02:39 PM ----------
Update: I made sure OEM unlock was checked in developer settings and eventually was able to flash TWRP via Fastboot.
My watch is now bootlooping over and over again in TWRP, says:
"Done processing script file, renamed stock recovery file in /system to prevent the stock ROM from replacing TWRP."
Click to expand...
Click to collapse
if your bootloader is locked, it will not allow you to flash twrp recovery via fastboot . Use SP FLASH TOOLS for this purpose. Once you flash recovery do not reboot to system. Reboot to recovery for the first time and then it should be ok. Else root your watch first and flash recovery using Flashify. This method will also do the job.
Gautam_Gundap said:
if your bootloader is locked, it will not allow you to flash twrp recovery. Use SP FLASH TOOLS for this purpose. Once you flash recovery do not reboot to system. Reboot to recovery for the first time and then it should be ok. Else root your watch first and flash recovery using Flashify. This method will also do the job.
Click to expand...
Click to collapse
Did you read my update? It's bootlooping TWRP.
dimex said:
Did you read my update? It's bootlooping TWRP.
Click to expand...
Click to collapse
If you are unable to reboot to system, then you need to re flash complete stock rom. You can do this using cracked miracle software. I have already uploaded full stock rom for flashing via cracked miracle box software except data/userdata partition . you can find it in one of the lemfo lem5 threads here. After re flash you can use the steps explained earlier to flash twrp recovery
I just released a fully working TWRP 3.0.2 recovery for X5+ and LEM5 here:
http://roundandroidwatches.proboards.com/thread/1016/twrp-recovery-port-x5-lem5
Don't forget to read all the instructions.
From the first time i was not able to upgrade my phone to another new version of Android.
The phone was bought on chinese store with Android version : WW V10.40.47.107 (Android MM)
When i checked availability of new versions, phone showed me no result available.
Then following instructions i unlocked bootloader and then install TWRP as recovery system.
I tried to install updates of ROM downloaded from Asus website using this methods with this results :
installing by TWRP with ROM transfered to internal memory of phone KO
installing by "ADB sideload" command KO
I partially resolved after many attempts updating only to Version V11.41.87.2 (Android MM)
I solved in this way :
i used TWRP installing from file transfered directly in microSD
i extracted from zipped file "updater-script" file that is possible to find in the following folder path :
META-INF > com > google > android
and then deleted this rows :
(!less_than_int(1494697617, getprop("ro.build.date.utc"))) || abort("Can't install this package (2017年 05月 14日 星期日 01:46:57 CST) over newer build (" + getprop("ro.build.date") + ").");
.....
getprop("ro.build.asus.sku") == "WW" || abort("Please use the right SKU for updating...");
.....
and then save file extracted and compress into zip file.
During TWRP install process i got some error updates, it seems connected to System folder/partition update
but at the end i was able to update Android to my phone
I tried to do the same method with an other update Version V20.32.67.25 i got a corrupted System folder/partition
It seems essential to update this phone to use original recovery system. Can anyone give it to me?
Or is there someone who has been able to install updates using TWRP without any error ?
Also after installation I wiped the Boot, System, Data, Cache partitions and then I restored from Nandroid backup done by TWRP.
But the phone did not start at the reboot.
I then had to reinstall the update with the method described above to get the working phone back
Why did Nandroid backup with TWRP not correctly restore the phone?
Many thanks to anyone can help me
https://forum.xda-developers.com/showthread.php?p=72448182
There is a link to a rom in this post. In that zip you will find recovery.img. Flash it with adb, like you flashed twrp.
Then you can flash the last M official rom, and subsequently the first and last N roms.
That's the way I did it. I had to end up wiping data, to make it work correctly.
I'm also looking for a Nougat recovery.img.
I wouldn't like to go thru all the process again if there is another update.
Good luck.
Sent from my ASUS_Z01HD using Tapatalk
betche99 said:
https://forum.xda-developers.com/showthread.php?p=72448182
There is a link to a rom in this post. In that zip you will find recovery.img. Flash it with adb, like you flashed twrp.
Then you can flash the last M official rom, and subsequently the first and last N roms.
That's the way I did it. I had to end up wiping data, to make it work correctly.
I'm also looking for a Nougat recovery.img.
I wouldn't like to go thru all the process again if there is another update.
Good luck.
Sent from my ASUS_Z01HD using Tapatalk
Click to expand...
Click to collapse
I already downloaded that file but i didn't find any recovery.img file inside.
I try again
Many thanks :good::good::good:
johnjohnmel said:
I already downloaded that file but i didn't find any recovery.img file inside.
I try again
Many thanks :good::good::good:
Click to expand...
Click to collapse
i think you need flash full firmware bro ,
1. Download newer version firmware
2. You need Convert system.New.DAT to system.img
3. Move system.img and boot.img to minimal adb & fastboot folder
4. Open minimal adb & fastboot
5. Flash boot.img and system.img
halim_wijaya58 said:
2. You need Convert system.New.DAT to system.img
Click to expand...
Click to collapse
Hi Halim
Can I change *.DAT to *.img? or I should convert DAT to IMG with special app.?
Hi all.
I have the same room and can't seem to upgrade to N does anyone have a solution?
halim_wijaya58 said:
i think you need flash full firmware bro ,
1. Download newer version firmware
2. You need Convert system.New.DAT to system.img
3. Move system.img and boot.img to minimal adb & fastboot folder
4. Open minimal adb & fastboot
5. Flash boot.img and system.img
Click to expand...
Click to collapse
Just to let you know I did this then downloaded each update from Asus website. You have to do it in order ie newest MM to oldest N to newest N. Takes a lot of time but it works. I now have N on my phone.
Thanks everyone for all your help.
mikejasonsmith said:
Just to let you know I did this then downloaded each update from Asus website. You have to do it in order ie newest MM to oldest N to newest N. Takes a lot of time but it works. I now have N on my phone.
Thanks everyone for all your help.
Click to expand...
Click to collapse
Boss, I have Asus Zenfone 3 Zoom. I want to update Android nougat. Please help me . Already I unlocked bootloader and convert CN to WW Rom ........
Please help me ....... Please help me....... Please help me
???
---------- Post added at 12:13 PM ---------- Previous post was at 12:10 PM ----------
mikejasonsmith said:
Just to let you know I did this then downloaded each update from Asus website. You have to do it in order ie newest MM to oldest N to newest N. Takes a lot of time but it works. I now have N on my phone.
Thanks everyone for all your help.
Click to expand...
Click to collapse
Boss, I have Asus Zenfone 3 Zoom. I want to update Android nougat. Please help me . Already I unlocked bootloader and convert CN to WW Rom ........
Please help me ....... Please help me....... Please help me
???
Dear boss , please give me Asus Zenfone 3 Zoom Nougat flashable Rom or any easy solutions........
???
After 11 hours trying out finally solved!!!
I originally just wanted to do a factory reset, and swiped then not only data/cache, but unfortunally - because of lack of expirience - also system partition. After that all the problems occured like described above and partitionally in https://forum.xda-developers.com/zenfone-3/help/unbricking-zenfone-3-ze552kl-dm-verity-t3563970 (there was no OS anymore, twrp warned me this every time I wanted to power off, but I couldn't install the firmware again through fastboot neither through twrp -> install zip; have got error 7 or 6).
Afer a lot of fears and hours of trying aroud possibilities above as well as ideas from articles here:
https://forum.xda-developers.com/zenfone-3/help/unbricking-zenfone-3-ze552kl-dm-verity-t3563970
https://www.getdroidtips.com/v20-31-49-2-nougat-asus-zenfone-3-zoom/
https://forum.xda-developers.com/ze...om-ze553kl-t3612990/post72448182#post72448182
https://forums.oneplus.net/threads/twrp-failed-to-mount-system-invalid-argument.508967/
https://android.stackexchange.com/questions/165370/restoring-system-partition-in-twrp
https://4pda.ru/forum/index.php?showtopic=810939&st=240#entry63616813
I have finally founded a solution!!! This is in FIRSTLY restoring original recovery and just then flashing the stock ROM. Here the steps to do for it:
a.) Download original stock rom (raw-version!) from https://cloud.mail.ru/public/HuMJ/wEybSNsQA (raw is to flash through AFT - asus flash tool) or from any other source you can find online; official name seems to be "WW-ZE553KL-20.31.49.2-MR2-user-20170620235128-release_raw.zip"
b.) Exctract and move recovery.img to your adb-folder on PC
c.) Boot your phone into fastboot/boot mode, connect to PC through USB-Cable
d.) Run cmd in adb folder, then type in the command "fastboot flash recovery recovery.img"
e.) Reboot and choose recovery mode - now you have no twrp anymore, but the original recovery menue
f.) Install update, which means, original stock from your sd-card.
Be happy!
It would be nice if you could give me feedback, whether my solution was helpful for you, because it took time to write it and hope it will usefull
figulus said:
I originally just wanted to do a factory reset, and swiped then not only data/cache, but unfortunally - because of lack of expirience - also system partition. After that all the problems occured like described above and partitionally in https://forum.xda-developers.com/zenfone-3/help/unbricking-zenfone-3-ze552kl-dm-verity-t3563970 (there was no OS anymore, twrp warned me this every time I wanted to power off, but I couldn't install the firmware again through fastboot neither through twrp -> install zip; have got error 7 or 6).
Afer a lot of fears and hours of trying aroud possibilities above as well as ideas from articles here:
https://forum.xda-developers.com/zenfone-3/help/unbricking-zenfone-3-ze552kl-dm-verity-t3563970
https://www.getdroidtips.com/v20-31-49-2-nougat-asus-zenfone-3-zoom/
https://forum.xda-developers.com/ze...om-ze553kl-t3612990/post72448182#post72448182
https://forums.oneplus.net/threads/twrp-failed-to-mount-system-invalid-argument.508967/
https://android.stackexchange.com/questions/165370/restoring-system-partition-in-twrp
https://4pda.ru/forum/index.php?showtopic=810939&st=240#entry63616813
I have finally founded a solution!!! This is in FIRSTLY restoring original recovery and just then flashing the stock ROM. Here the steps to do for it:
a.) Download original stock rom (raw-version!) from https://cloud.mail.ru/public/HuMJ/wEybSNsQA (raw is to flash through AFT - asus flash tool) or from any other source you can find online; official name seems to be "WW-ZE553KL-20.31.49.2-MR2-user-20170620235128-release_raw.zip"
b.) Exctract and move recovery.img to your adb-folder on PC
c.) Boot your phone into fastboot/boot mode, connect to PC through USB-Cable
d.) Run cmd in adb folder, then type in the command "fastboot flash recovery recovery.img"
e.) Reboot and choose recovery mode - now you have no twrp anymore, but the original recovery menue
f.) Install update, which means, original stock from your sd-card.
Be happy!
It would be nice if you could give me feedback, whether my solution was helpful for you, because it took time to write it and hope it will usefull
Click to expand...
Click to collapse
Boss,
This solutions can work with ASUS ZENFONE 3 ZOOM.........???
I have ZenFone 3 zoom. Already I successfully convert CN to WW Rom by following this introduction ... https://forum.xda-developers.com/zenfone-3-zoom/how-to/transfer-cn-rom-to-ww-rom-ze553kl-t3612990
But, I can't update android nougat any way. I convert system.new.dat to system.img...... And try to flash it but unfortunately that's not working......
Please help me .......:crying:
Yes, I did it with my Zenfone 3 Zoom (ze553kl). So, you have firstly to flash the original recovery - to find, as described, in the raw stock rom zip archive. Or, you can find all original recovery's also here: (not tested by myself) https://mega.nz/#F!p90wgAaY!l1JbJilmAUEKTKWu43pT9w
Copy recovery.img to adb-folder, then flash it in fastboot mode in the cmd with "fastboot flash recovery recovery.img". Also copy the original stock rom with Android N to your sd-card and put it into your phone.
Then reboot your phone into recovery - now you have no twrp anymore, but original recovery. Install now the zip with Android-N-stock-firmware from sd-card. Enjoy!
figulus said:
Yes, I did it with my Zenfone 3 Zoom (ze553kl). So, you have firstly to flash the original recovery - to find, as described, in the raw stock rom zip archive. Or, you can find all original recovery's also here: (not tested by myself) https://mega.nz/#F!p90wgAaY!l1JbJilmAUEKTKWu43pT9w
Copy recovery.img to adb-folder, then flash it in fastboot mode in the cmd with "fastboot flash recovery recovery.img". Also copy the original stock rom with Android N to your sd-card and put it into your phone.
Then reboot your phone into recovery - now you have no twrp anymore, but original recovery. Install now the zip with Android-N-stock-firmware from sd-card. Enjoy!
Click to expand...
Click to collapse
Boss ,
Thank you very much ...... Your solution absolutely excellent and work very well . I am very happy for your support . But unfortunately I found new problem on my phone ...... After update nougat a white line found on the display......
How can I solved it .......
Waiting for solution.......
Thanks again for your support ........
Glad to hear, that it worked for you as well. About white line I have no idea, but on other pages I have already seen somewhere, that other users also reported about this problem. Try to look at google "ze553kl update white line". You can also search a solution for ze552kl instead of ze553kl, because, as far as I know, the ze552kl (ZenFone 3, without "Zoom") is almost the same device, just with a little worse cam. Therefore, it seems to be longer on the market and to have more users, so there are also more solutions for problems which can occure to this device in the internet. Wish you a good luck!
figulus said:
I originally just wanted to do a factory reset, and swiped then not only data/cache, but unfortunally - because of lack of expirience - also system partition. After that all the problems occured like described above and partitionally in https://forum.xda-developers.com/zenfone-3/help/unbricking-zenfone-3-ze552kl-dm-verity-t3563970 (there was no OS anymore, twrp warned me this every time I wanted to power off, but I couldn't install the firmware again through fastboot neither through twrp -> install zip; have got error 7 or 6).
Afer a lot of fears and hours of trying aroud possibilities above as well as ideas from articles here:
https://forum.xda-developers.com/zenfone-3/help/unbricking-zenfone-3-ze552kl-dm-verity-t3563970
https://www.getdroidtips.com/v20-31-49-2-nougat-asus-zenfone-3-zoom/
https://forum.xda-developers.com/ze...om-ze553kl-t3612990/post72448182#post72448182
https://forums.oneplus.net/threads/twrp-failed-to-mount-system-invalid-argument.508967/
https://android.stackexchange.com/questions/165370/restoring-system-partition-in-twrp
https://4pda.ru/forum/index.php?showtopic=810939&st=240#entry63616813
I have finally founded a solution!!! This is in FIRSTLY restoring original recovery and just then flashing the stock ROM. Here the steps to do for it:
a.) Download original stock rom (raw-version!) from https://cloud.mail.ru/public/HuMJ/wEybSNsQA (raw is to flash through AFT - asus flash tool) or from any other source you can find online; official name seems to be "WW-ZE553KL-20.31.49.2-MR2-user-20170620235128-release_raw.zip"
b.) Exctract and move recovery.img to your adb-folder on PC
c.) Boot your phone into fastboot/boot mode, connect to PC through USB-Cable
d.) Run cmd in adb folder, then type in the command "fastboot flash recovery recovery.img"
e.) Reboot and choose recovery mode - now you have no twrp anymore, but the original recovery menue
f.) Install update, which means, original stock from your sd-card.
Be happy!
It would be nice if you could give me feedback, whether my solution was helpful for you, because it took time to write it and hope it will usefull
Click to expand...
Click to collapse
Very helpful, thanks!
I must've messed something up when I flashed TWRP.
TWRP ran fine, but when I tried to start it up, it stayed stuck at the Android logo.
Then errors popped up when I tried to install the stock rom through TWRP.
I never would've thought or had the guts to restore stock recovery first.
This should get its own thread.
Edit: I think my mistake was unchecking "Mount system partition read-only."
halim_wijaya58 said:
i think you need flash full firmware bro ,
1. Download newer version firmware
2. You need Convert system.New.DAT to system.img
3. Move system.img and boot.img to minimal adb & fastboot folder
4. Open minimal adb & fastboot
5. Flash boot.img and system.img
Click to expand...
Click to collapse
After many days i finally found enough time to try to use your tips.
I tried to convert system.New.DAT to system.img but without success using this program Autotool 3.0
http://www.droidviews.com/convert-and-extract-system-img-and-system-new-dat-files-on-windows/
After this attempt i used a ROM provided by chinese store to flash its content :
system.img
boot.img
recovery.img
Original recovery.img is essential to install other updates.
After that i tried to install other updates recognized directly starting by phone but always without success.
So i have had to install updates using original recovery tool.
Now i got Android 7.1.1 last version installed on my phone but it's impossible to use
TWRP recovery tool.
Obviously it's possible to install TWRP instead of original recovery tool and also possible to make a nandroid backup
but it's impossible to use it to install original ROMs released from Asus and it's not possible
to use to restore nandroid backups.
Is it eventually possible to use a custom ROM ? If it's, which one and possibly compatible with TWRP ?
i solved issue of update, but TWRP ?
halim_wijaya58 said:
i think you need flash full firmware bro ,
1. Download newer version firmware
2. You need Convert system.New.DAT to system.img
3. Move system.img and boot.img to minimal adb & fastboot folder
4. Open minimal adb & fastboot
5. Flash boot.img and system.img
Click to expand...
Click to collapse
After many days I finally found enough time to try to update my Asus Zenfone 3 Zoom to Android Nougat.
To solve the issue, I used an original Rom from the Chinese store because it contains useful files for purpose without any conversion:
boot.img
system.img
recovery.img
I flashed all 3 IMG files.
Recovery.img that it's necessary to get original recovery without which any update can be done.
You must use a microSD and the original recovery tool to be able to upgrade your system.
The problem is that it does not seem possible to use TWRP. It is possible to install it in place of the original recovery and you can do also a nandroid backup but in practice you can not use it to install any updates and restore any nandroid backups.
Is there a custom rom that you can use instead of the original one?
SUJAN SN HW said:
Boss,
This solutions can work with ASUS ZENFONE 3 ZOOM.........???
I have ZenFone 3 zoom. Already I successfully convert CN to WW Rom by following this introduction ... https://forum.xda-developers.com/zenfone-3-zoom/how-to/transfer-cn-rom-to-ww-rom-ze553kl-t3612990
But, I can't update android nougat any way. I convert system.new.dat to system.img...... And try to flash it but unfortunately that's not working......
Please help me .......:crying:
Click to expand...
Click to collapse
how did you convert the .dat to .img?
josejbs said:
how did you convert the .dat to .img?
Click to expand...
Click to collapse
Here's a link to the tool
https://forum.xda-developers.com/android/general/tools-extract-dat-t3467581
Hi there, good to see you.
After struggling to find any helpful information about rooting ZTE Blade A2 plus, I finally was able to root>soft brick>hard brick>stock flash>repeat this beautiful device. So thought to share it here so that it becomes helpful for someone in need.
Device Information: https://forum.xda-developers.com/ge...te-blade-a2-plus-5-5-fhd-mt6750t-3gb-t3480759
Prerequisite: Winrar Latest version, VCOM and device drivers (MT67xx), General intelligence to download the attachments and to arrange everything in order and you're good to go
Step 1: Install custom recovery (We'll install TWRP)
a} Download recovery and preloader
b} Download Scatter file
c} Download SP Flash tools
d} Only tick recovery and preloader and select the downloaded files and flash it
e} When the process finishes and SP flash tools displays done, remove the phone and press "Vol Up+Power" to boot into recovery. It may ask you to make /system writable if you want swipe as indicated
f} Done enjoy
Note: Take this opportuniy to first of all backup your stock rom using TWRP and save it elsewhere.
Step 2: Rooting (With Magisk Or Super SU)
a} Download Magisk or Super SU flashable zip as per your need
Note: Magisk gives most of the Super SU features and doesn't trips google security net so you are able to use banking apps while rooted with magisk
b} Place downloaded zip in your sd card
c} Boot into TWRP recovery and flash the said zip
d} Done enjoy
Step 3: Flashing stock rom (Only russian version as of now)-Language is english bloatwares are Russian
a} Download Stock Rom from https://yadi.sk/d/RZLBrKKv3LxejN
Note: It contains PC Flashable stock rom along with scatter files and NVRAM backups so it'll help if you lose IMEI during the process, it is advisable to keep this offline as backup in case links stops working.
b} Flash the downloaded stock rom with SP flash tools
Note: This stock rom doesn't support VOLTE so i advice you to first take a full backup of your initial rom after installing TWRP, also please share that backup here as well so as i could add it to this thread to make it helpful for someone who has already lost VOLTE inclusing me
Conclusion: I'll be very happy if this information proves useful to you in any manner and also request you to must share your backup for me to get VOLTE back.
Thank You
MIUI 9 For A610 Plus
Preview:
Many many thanks Alfonso for making this vary valuable post . I think A2 Plus and A610 Plus are almost same , so kindly check this ROM me and may solve your volte problem
ww.getdroidtips.com/miui-9-zte-blade-a610-plus/[/url]
Rajevpmavoor said:
Preview:
Many many thanks Alfonso for making this vary valuable post . I think A2 Plus and A610 Plus are almost same , so kindly check this ROM me and may solve your volte problem
ww.getdroidtips.com/miui-9-zte-blade-a610-plus/[/url]
Click to expand...
Click to collapse
Although the rom is bugless but, unfortunately VOLTE didn't work.
MIUI 9 For A610 Plus
Did you flash this new MIUI 9 ROM , I think it has volte and it is in Android M.
Alfonso Osnofla said:
Although the rom is bugless but, unfortunately VOLTE didn't work.
Click to expand...
Click to collapse
does it boot into meta mode on pressing volume down+power button??( bcoz my fone boots into meta mode on doing so)
and how to go into bootloader?
while using sp flash tool i power off the fone and then connect it to sp flash tool via usb cable ...fone gets detected and but download for twrp doesnt occur ..it says PMT changed for the rom, select format all+ download ....
but i didnt do format all coz i dont have flashable stock rom...
I lost my IMEI after flash ROM, not able to retrieve IMEI
Issue in camera & Finger Lock
Alfonso Osnofla said:
Although the rom is bugless but, unfortunately VOLTE didn't work.
Click to expand...
Click to collapse
I have checked both ROM, Miui ROM camera is look like .02MB, No VOLTE, Finger Print lock is not working
Thanks. I have messed up anyway...
Anybody have a complete Readback (Using SP-Flash Tools) copy of (volte) rom?
I lost Imei, From the given NVram.bin, Could not edit Imei using BPGL.... pull as Maui Meta and SN writer can not do this with present update.
I need to revert back. please help with ROM copy and NVRAM Edit.
Alfonso Osnofla said:
Hi there, good to see you.
After struggling to find any helpful information about rooting ZTE Blade A2 plus, I finally was able to root>soft brick>hard brick>stock flash>repeat this beautiful device. So thought to share it here so that it becomes helpful for someone in need.
Device Information: https://forum.xda-developers.com/ge...te-blade-a2-plus-5-5-fhd-mt6750t-3gb-t3480759
Prerequisite: Winrar Latest version, VCOM and device drivers (MT67xx), General intelligence to download the attachments and to arrange everything in order and you're good to go
Step 1: Install custom recovery (We'll install TWRP)
a} Download recovery and preloader
b} Download Scatter file
c} Download SP Flash tools
d} Only tick recovery and preloader and select the downloaded files and flash it
e} When the process finishes and SP flash tools displays done, remove the phone and press "Vol Up+Power" to boot into recovery. It may ask you to make /system writable if you want swipe as indicated
f} Done enjoy
Note: Take this opportuniy to first of all backup your stock rom using TWRP and save it elsewhere.
Step 2: Rooting (With Magisk Or Super SU)
a} Download Magisk or Super SU flashable zip as per your need
Note: Magisk gives most of the Super SU features and doesn't trips google security net so you are able to use banking apps while rooted with magisk
b} Place downloaded zip in your sd card
c} Boot into TWRP recovery and flash the said zip
d} Done enjoy
Step 3: Flashing stock rom (Only russian version as of now)-Language is english bloatwares are Russian
a} Download Stock Rom from https://yadi.sk/d/RZLBrKKv3LxejN
Note: It contains PC Flashable stock rom along with scatter files and NVRAM backups so it'll help if you lose IMEI during the process, it is advisable to keep this offline as backup in case links stops working.
b} Flash the downloaded stock rom with SP flash tools
Note: This stock rom doesn't support VOLTE so i advice you to first take a full backup of your initial rom after installing TWRP, also please share that backup here as well so as i could add it to this thread to make it helpful for someone who has already lost VOLTE inclusing me
Conclusion: I'll be very happy if this information proves useful to you in any manner and also request you to must share your backup for me to get VOLTE back.
Thank You
Click to expand...
Click to collapse
Just try http://www.ztedevice.com/support/detail?id=FE22BEF5C33D4A17BCDA20AAE2631951 ( http://download.ztedevice.com/support/product/569/201802111051594/sd/20180211105554767.zip )
sd card update using twrp.
But first remove the first line from update script file located inside the zip.
Just reply.
Need MIUI rom
Heyy plz gime me teh rom for zte blade A2 plus i really need a miui rom for zte blade A2 plus...
Help I'm confused.
Reading the comments i got to know that many people lost their IMEI and VOLTE , I want to root the device So can anyone tell me when does this problem occur (loosing volte and imei) during rooting or while flashing a custom rom?
kingksath said:
I lost my IMEI after flash ROM, not able to retrieve IMEI
Click to expand...
Click to collapse
Did you loose your IMEI on rooting or while flashing any custom Rom?
http://www.mediafire.com/file/6768c1x7dqyd818/update.zip
version 4 sd card update
vasilemk said:
http://www.mediafire.com/file/6768c1x7dqyd818/update.zip
version 4 sd card update
Click to expand...
Click to collapse
What is it for?
Is it for volte?
vasilemk said:
http://www.mediafire.com/file/6768c1x7dqyd818/update.zip
version 4 sd card update
Click to expand...
Click to collapse
Is this an update to the Stock Rom?
hi, can u help me please, iam tryin to update with twrp , i did remove first line from script but i have error.
Found a way to unlock bands on MTK based phones by flashing basebands from phones with the same chipset. Doing this by using SPFLASH and flashing md1 files. Still unable to connect to cell network on my Doogee bl12000. Flashed this phones MD1, was wondering if anybody could provide me with the nvdata and nvram from the ZTE blase a2 plus. Hoping by flashing those files can connect to a U.S. network.
I just finished reading a thread on another Redmi forum, here on XDA, about rooting a Redmi S2 without permanent TWRP flash.
Do you think it's possible to successfully apply the same steps on MIUI 11 Global Stable Redmi 7A (using the proper boot.img)?
Things needed :
- Unlocked Bootloader
- PC with ADB and Fastboot installed
- boot.img of your miui rom. You can grab it (open with winRar) from fastboot firmware (.tgz) xiaomi redmi S2. Download the firmware file in xiaomi site or in this section thread. The version are reccomended to be the same as your current miui version.
- Magisk Manager.apk
1. Open Magisk Manager
2. Press Install > Install > Patch Boot Image File, and select your boot.img file
3. Magisk Manager will now patch your boot image, and store it in Internal Storage/Download/patched_boot.img
4. Copy the patched boot image to your PC. Place it in Minimal ADB & Fastboot directory.
5. Flash the patched boot image to your device. Here is the command :
fastboot flash boot boot.img
6. If adb say "Okay" twice, mean it succesfully.
Type : fastboot reboot
7. Wait your phone to reboot.
From here:
https://forum.xda-developers.com/redmi-s2/how-to/magisk-root-custom-recovery-t3863402
cris2d2 said:
I just finished reading a thread on another Redmi forum, here on XDA, about rooting a Redmi S2 without permanent TWRP flash.
Do you think it's possible to successfully apply the same steps on MIUI 11 Global Stable Redmi 7A (using the proper boot.img)?
Things needed :
- Unlocked Bootloader
- PC with ADB and Fastboot installed
- boot.img of your miui rom. You can grab it (open with winRar) from fastboot firmware (.tgz) xiaomi redmi S2. Download the firmware file in xiaomi site or in this section thread. The version are reccomended to be the same as your current miui version.
- Magisk Manager.apk
1. Open Magisk Manager
2. Press Install > Install > Patch Boot Image File, and select your boot.img file
3. Magisk Manager will now patch your boot image, and store it in Internal Storage/Download/patched_boot.img
4. Copy the patched boot image to your PC. Place it in Minimal ADB & Fastboot directory.
5. Flash the patched boot image to your device. Here is the command :
fastboot flash boot boot.img
6. If adb say "Okay" twice, mean it succesfully.
Type : fastboot reboot
7. Wait your phone to reboot.
From here:
https://forum.xda-developers.com/redmi-s2/how-to/magisk-root-custom-recovery-t3863402
Click to expand...
Click to collapse
but what would that help you with? having the normal recovery?
mike500005 said:
but what would that help you with? having the normal recovery?
Click to expand...
Click to collapse
I just want Root capabilities, I don't want to replace stock Global Stable MIUI.
cris2d2 said:
I just want Root capabilities, I don't want to replace stock Global Stable MIUI.
Click to expand...
Click to collapse
yes i understand but what would be the goal? what you dont like or are afraid that you dont want the recovery is it because OTA updates? or??? you can try to root it and then reflash the stock recovery.img and apply a patched boot image could work idnk cause i have already done a lot to get mine working with latest update and i don't really want to go threw all the backups again
cris2d2 said:
I just want Root capabilities, I don't want to replace stock Global Stable MIUI.
Click to expand...
Click to collapse
custom recovey doesn't replace rom
indeed what you descripe is the official and recommended root method. TWRP is just for nandroid backup (not really needed since Migrate Backup and Magisk Modules can flash straight from android without TWRP at all), therefore the Magisk.zip is just for traditional reasons. Many devices don't even have TWRP (or with no working encryption support)
Installation
The Magic Mask for Android
topjohnwu.github.io
We no longer recommend installing Magisk through custom recoveries on modern devices. The custom recovery installation method exists mostly for legacy support
Click to expand...
Click to collapse