Just a head's up...
I installed this ROM 2 days ago and it was working brilliantly until last night. My K1 powered down (assuming battery died...) and when I was finally able to get it to boot up no applications would work:
Upon booting I received messages that App Store is no longer working, Swype Beta is no longer working.
I attempted to open Scramble (Zynga game) and it force closed.
I attempted to open Facebook, and while it remained open, it would not connect, despite a good WiFi connection
I did a factory reset and got a notice that root may have been lost, so I elected to repair.
At the point where I tried to connect to WiFi as the first step in setup, the system apps started crashing.
I'm re-flashing now to see if that does any good, but wanted to make a note somewhere that this ROM may not be as stable.
Unfortunately, I can't post this reply to the DEV forums because I'm a noob.
Hi,
I was wondering if someone can help.
I recently bought a Tag Heuer Connected watch which was my first ever android wear watch. After setting up and pairing with my phone, the watch had two updates required. The first was successful with no issues. During the second update the screen started flashing and the phone kept vibrating/buzzing with the screen being unresponsive 99% of the time. After doing some research i was told to fully charge, let the battery drain and try again. I have done this numerous times to much frustration and very limited success.
I was also told to do a factory reset. This required many restarts and other issues as previously mentioned the screen isn't working and only sometimes (1 try in every 100) can i get to the hardware reset page and actually click it. I have finally managed a factory reset, but the watch continues to buzz and the screen flashes every second or so with the screen again not functioning correctly. I am pretty sure it had something to do with the update as i had no issues before update number 2. I have spent many hours looking at similar issues and this forum was recommended.
Any help on this will be truly appreciated.
Tony
Hi Tony,
I'd take it straight back to the shop you got it from. Wouldn't expect that from a smartwatch, but from a premium brand, the problem solving shouldn't be your issue.
Paul
Tonypax said:
Hi,
I was wondering if someone can help.
I recently bought a Tag Heuer Connected watch which was my first ever android wear watch. After setting up and pairing with my phone, the watch had two updates required. The first was successful with no issues. During the second update the screen started flashing and the phone kept vibrating/buzzing with the screen being unresponsive 99% of the time. After doing some research i was told to fully charge, let the battery drain and try again. I have done this numerous times to much frustration and very limited success.
I was also told to do a factory reset. This required many restarts and other issues as previously mentioned the screen isn't working and only sometimes (1 try in every 100) can i get to the hardware reset page and actually click it. I have finally managed a factory reset, but the watch continues to buzz and the screen flashes every second or so with the screen again not functioning correctly. I am pretty sure it had something to do with the update as i had no issues before update number 2. I have spent many hours looking at similar issues and this forum was recommended.
Any help on this will be truly appreciated.
Tony
Click to expand...
Click to collapse
if you haven't already done so, open a support ticket with TagHeuer so there's a record of your troubles. i was having battery issues (lasted on 7 hours) and after 3 days of troubleshooting they told me to take it in for an exchange. i went to the TagHeuer store and they gave me a new one without any problem.
Hey how did you guys do a factory reset? i think i am having the same issues of the flashing main screen (black and white outline of the tag logo)
thanks
I Got the update through a couple of days ago and I've had nothing but trouble since, lots of force quitting and locking up, the console has reset itself a few times as well.
I use the Shield with a 64gb Micro SD and a 500gb external Hard drive, I set the SD Card to act as internal storage, the setup worked fine but the Shield started to lock up so I took that out which fixed the issue. I did a factory reset on the console at this point as well.
Ive been able to setup the Sheild using the Hard Drive or SD Card as internal storage, that seems ok but at the minute the Google Play store wont stop Crashing. First thing I did after the restore was make sure the bundled apps were up to date, this I can do just fine but if I try to go into any app to download it to the console, I just get the 'Unfortunately Google play has stopped' error and nothing happens.
Ive tried resetting the console, clearing the cache on the store, trying the store before I update any bundled apps.. nothing works. The apps installed on there are fine but I cant add anything new.
Is anybody else having similar issues?
mozza54 said:
I Got the update through a couple of days ago and I've had nothing but trouble since, lots of force quitting and locking up, the console has reset itself a few times as well.
I use the Shield with a 64gb Micro SD and a 500gb external Hard drive, I set the SD Card to act as internal storage, the setup worked fine but the Shield started to lock up so I took that out which fixed the issue. I did a factory reset on the console at this point as well.
Ive been able to setup the Sheild using the Hard Drive or SD Card as internal storage, that seems ok but at the minute the Google Play store wont stop Crashing. First thing I did after the restore was make sure the bundled apps were up to date, this I can do just fine but if I try to go into any app to download it to the console, I just get the 'Unfortunately Google play has stopped' error and nothing happens.
Ive tried resetting the console, clearing the cache on the store, trying the store before I update any bundled apps.. nothing works. The apps installed on there are fine but I cant add anything new.
Is anybody else having similar issues?
Click to expand...
Click to collapse
I am having an issue when it wakes after sleeping, I get a message saying Nvidia HDMI Services has stopped working. If you click OK, it just shows the message over and over. The only way to get out of it, is to pull the power cord and reboot. Didn't have the issue until I upgraded to 6.0
gPhunk said:
I am having an issue when it wakes after sleeping, I get a message saying Nvidia HDMI Services has stopped working. If you click OK, it just shows the message over and over. The only way to get out of it, is to pull the power cord and reboot. Didn't have the issue until I upgraded to 6.0
Click to expand...
Click to collapse
I guess we need wait when official mm build shows up on Nvidia home page and then just clean install through fastboot. P.s. ...I have kind of weird lags with remote control, when I start using/presing buttons constantly - volume level goes up and down randomly, and also found even random woke ups from sleep.
Izsūtīts no manas Nokia 3310 используя бесплатную xda app
I have three nVidia Shield 16GB versions and the one attached to a receiver gives me the "Unfortunately, NVIDIA HDMI Services has stopped." message every time I wake it from sleep (which you can click OK, but it immediately respawns). As was stated, the only option is to pull the plug. The other two don't have this issue and I'm wondering if it has something to do with being attached to a receiver. I've had zero issues until the 6.0 update.
stazna01 said:
I have three nVidia Shield 16GB versions and the one attached to a receiver gives me the "Unfortunately, NVIDIA HDMI Services has stopped." message every time I wake it from sleep (which you can click OK, but it immediately respawns). As was stated, the only option is to pull the plug. The other two don't have this issue and I'm wondering if it has something to do with being attached to a receiver. I've had zero issues until the 6.0 update.
Click to expand...
Click to collapse
I have a 16GB Nvidia Shield TV plugged directly into my Sony 4K television. Since the 3.0 firmware/Marshmallow update, I am getting the same "Nvidia HDMI Services have stopped" error as described above. And yes, pulling the plug is the only solution.
Yup. Mine is plugged into a Sony receiver. The irony is that this build was supposed to include a bug fix that people with Denon receivers were having. Well if they fixed that issue they apparently broke the rest of us! Face Palm
I have 2 shields, the one connected to a 4k TV has the HDMI service problem and the one on a 1080p TV don't. I switched both and problems persisted on the 4k TV.
I don't pull the plug to reboot. I just hold back to make the power menu open. I press OK and spam the down button to get on the reboot option and the just spam the OK button for the reboot.
Very annoyed by this.
Contacted Nvidia support about this "HDMI services have stopped" issue: useless. They just provided a generic power cycle/ reboot troubleshooting procedure...which didn't work anyway.
Sent from my Nexus 6P using Tapatalk
same here
mozza54 said:
I Got the update through a couple of days ago and I've had nothing but trouble since, lots of force quitting and locking up, the console has reset itself a few times as well.
I use the Shield with a 64gb Micro SD and a 500gb external Hard drive, I set the SD Card to act as internal storage, the setup worked fine but the Shield started to lock up so I took that out which fixed the issue. I did a factory reset on the console at this point as well.
Ive been able to setup the Sheild using the Hard Drive or SD Card as internal storage, that seems ok but at the minute the Google Play store wont stop Crashing. First thing I did after the restore was make sure the bundled apps were up to date, this I can do just fine but if I try to go into any app to download it to the console, I just get the 'Unfortunately Google play has stopped' error and nothing happens.
Ive tried resetting the console, clearing the cache on the store, trying the store before I update any bundled apps.. nothing works. The apps installed on there are fine but I cant add anything new.
Is anybody else having similar issues?
Click to expand...
Click to collapse
gPhunk said:
I am having an issue when it wakes after sleeping, I get a message saying Nvidia HDMI Services has stopped working. If you click OK, it just shows the message over and over. The only way to get out of it, is to pull the power cord and reboot. Didn't have the issue until I upgraded to 6.0
Click to expand...
Click to collapse
I have the HDMI issue upon waking from sleep, going through a Yamaha surround amplifier. Never had the issue before update. I also cannot do anything with the play store, selecting anything in the store brings up the unfortunately plat store has stopped. Called Nvidia and spoke to tech there, no help thus far, we have a thread in the nvidia forums about the play store. Called google, and they refused to even speak to me because they say it's a manufacturer's problem. Please report to our forum at the nvidia site, there are many of us there and we have tried almost everything to no avail.
Here's the link to the Nvidia forum. https://forums.geforce.com/default/...le-play-store-not-working-with-new-update-/9/
So this Nvidia Shield TV v3.0 firmware/6.0 Android update when about as bad as possible short of bricking everyone's box.
So far I'm seeing in the forums from other owners:
New "Nvidia HDMI Services Have Stopped" error message that can only be addressed by power-cycling
Shield not powering on from Sleep
Google Play Store broken/crashing
Shield controller mis-behaving
Netflix app dropping frames during playback.
Various issues with storage
And I'm sure many others I'm not aware of.
This has been compounded by the Kodi v16 update that just came out and broke 4K playback which is now being resized to HD resolutions.
I have not had any problems with my shield and this update. But must admit that I have not used it that much since the update.
Btw. As far as I can read on the Nvidia shield forum, choosing an SDcard as internal storage, will overwrite use of the internal storage for apps and games.
All the same problems on mine as well. Wish I didn't update!
16g model. I have not had any power cycling or app crashing or services stopped issues. But once again, they've clearly changed how bluetooth works, because sixaxis is currently non functional, which I loathe. Ever since the console came out, the DS4 controller has worked better than Nvidia's own controller, regardless of previous bluetooth issues. Makes me wonder if Nvidia targeted it for convenience.
I have an Android TV Shield (v3.0) which is connected via an amp Denon April-x4100w (hdmi back cover). The first day everything was fine, the second day more image. I tried restarting the shield, reset the amp, turn off the upscaling of the amp, change the video frequency .... do you have a solution???
"NVIDIA HDMI Service stopped" (NVIDIA HDMI Service wurde beendet"
gPhunk said:
I am having an issue when it wakes after sleeping, I get a message saying Nvidia HDMI Services has stopped working. If you click OK, it just shows the message over and over. The only way to get out of it, is to pull the power cord and reboot. Didn't have the issue until I upgraded to 6.0
Click to expand...
Click to collapse
So to say, I am glad not being the only one having that big issue with the NSATV.
Since the update to FW 3.0 (Android 6.0), I often have the problem that I get the pop-up "NVIDIA HDMI Service stopped" (as my NSATV is set to German language it is "NVIDIA HDMI Service wurde beendet").
Even if I accept by clicking "OK", nothing changes. The pop-up doesn´t disappear and I can´t do anything else.
I need to plug-off from power to restart it completely.
Any idea or workaround known?
May be it can be solved by using a different power-off or sleep-mode as before?
Appreciate any idea and help as it is not really amusing to plug-off the NSATV every time..
Dietmar
realcams said:
Since the update to FW 3.0 (Android 6.0), I often have the problem that I get the pop-up "NVIDIA HDMI Service stopped" (as my NSATV is set to German language it is "NVIDIA HDMI Service wurde beendet").
Even if I accept by clicking "OK", nothing changes. The pop-up doesn´t disappear and I can´t do anything else.
I need to plug-off from power to restart it completely.
Any idea or workaround known?
Click to expand...
Click to collapse
I'm having this same exact issue, and have been for a couple weeks (since the update). I've even searched to see if there is some way to go back to the previous version. I don't have a nandroid backup or anything (wish I had thougth ahead), but does anyone know if there's a way to rollback to the Lollipop stock release (including any firmware/boot/etc)?
It will only crash HDMI if unit was sleeping. If you power off instead, it will not happen. Only caveat is that you can not wake the device with controller or remote and have to manually touch the shield unit and wait for the android to load. Not ideal but manageable.
My Shield TV is not usable anymore. Right after a reboot the desktop/home screen is freezing. The spinning circle while loading recommendations stops spinning and the Shield TV does not react to any input. Even the clock is not counting anymore. After about 5 minutes the Shield TV reboots itself (watchdog reset?). And again keeps freezing as soon as the home screen appears. This sucks.
I take it that the general consensus is not to upgrade to FW 3.0 whatsoever? I just received my Shield today, and I'm a little hesitant to even power it up
Since updating to 8.0, my shield pro (2015) keeps freezing for a while (15 seconds to a few minutes) and the controller turns off after about 30 seconds of inactivity (vice before when it would stay on for a few minutes before turning off).
Has anybody else witnessed this behavior?
Cheers,
B. D.
The wifi on mine will magically turn itself off and won't restart till I restart the device..
Sent from my ONEPLUS A5010 using Tapatalk
I use Ethernet so sorry cant say if mine does that, however I have been having an issue since update that Netflix will not exit when i click exit from within the app im not sure if this is a Netflix or a shield thing but it started after the new update has anyone else had this issue or other issues?
My sheild could not pass through the connect to wifi stage. I tried several ways even using google nothing seem to work. It displays "cannot reach internet" it has been stuck on the setup since the update. I'm so tired dont know what else to do.
On my 2015 16Gb, after I put the device on sleep, I can not turn it on. I have to unplug it or sometimes only to manually touch the device.
Does anyone experience the same problem?
Lasted a couple of days on 8 before downgrading back to Oreo. Very unstable, and the killer for me, no root.
Wifi & bluetooth problems here too. Worked for about 1 minute and disconnect. What can I do? Reset the shield, recover the shield with 8.0, reboot router. No idea what I can do