Need a malaysk update - Android Head-Units

Hello community
Do someone know which update i need for this system?
Android 10
Hardware: 4-core All Winner 32gb 2gb ram
OS-Version: xphc0101-om1-1.0.4.5.1 - blink161
Kernel version: linux 4.9.118
Mcu: stm32-11-kc1-41
What mcu i have? And do someone know a malaysk update for this system
Thank you

i had the problem with my radio that i cant disable the camera, even i hadnt connected one. so i wrote the supppport of my seller and they sent me an email with a new update. this version seems to be from 27.02.2021.
hope i can help you with that links:
update notice.png
os_update_XPHC0101-OM5-1.0.4.9.1_20210227_112015_b1.zip
mcu-202102261001XP1-1424.upd

Hello,
Can you tell me which brand is your car stereo?
I am trying to reach customer service in order to obtain codes that I cannot find despite my hours of research on the forum

My head unit is an A-sure. Its a ****ty chinese radio. Was really dumb to buy one only because its cheaper and have apple carplay.

Related

help me identify my head unit and get firmware

hello xda
i want your help in my issue
i buy new android head unit for my elantra 2011
its chinease but have no obvious brand-name
im looking to identify its manufacture and to find
a back up firmware in case of i need to fix it or update it
so where i can find its mcu and system versions
i will provide u with information i get
processor type : quadcore T3
android version : 7.12
mcu version : T5 3.19-127-10-c06101-170321
system version : V8.3.2_20180118.105849_CTJ3
i will post pics in down tomorrow
i hope u can help me and will put more info if i get
thaaaanx alot in advance
Looking for the same information and help. Here are my specs
CPU Information- Cortex A9 Dual Core
Ram Information- 1gb ddr3
Android Version- 4.2.2
MCU version- 4.3.10-1-10-612101
System version- 2.8.8
Help, I'm trying to update the unit so I can connect obd2, save steering wheel controls, and use Google assistant with voice controls.
I would like to know how to update mcu and firmware to maximize the units capability and get everything up to date. After searching, i didnt come across anything that seemed it was definitive for my specs. Links and files would be much appreciated as i probably missed them in here somewhere already. Thanks for the help.

How to update and install the latest software from 5.1.2

Hello,
Im new here but i have question about a headunit for a vw golf 7 i just bought from china. I cant find anywhere how to upgrade the 5.1.2 to a higher android version.
Information about my headunit
Processor t3
Android 5.1.2
Mcu t3l.3.19-100-10-a49305-1908xx stm32
System version v6.4.3_29290830.192326_fg-bfd1-x
Storage 1,0 gb + 16gb
I hope someone know something
Thanks
These units are all custom, you need to get it from the seller, most don't offer any upgrades at all. Ever. They want you to buy new ones
Sent from my iPhone using Tapatalk

Noob questing for updating unbranded HeadUnit

Hi All,
I have been reading up a number of threads and would like some guidance of how to update my headunit.
Ive purchased a preowned car which it came with the Headunit. It is a VW Jetta (2015 model) not sure if its the stock unit.
As i cant find the model, i understand that might be difficult as it needs to match the resolution.
I have some details below:
Model Number: S07 (not sure which brand that even is)
MCU version: MTCB-KGL-v2.5.5
Android version: 4.4.4_01062015
CPU: Arm v7 1.6Ghz
Memory: 1024mb
I know i will need a KGL firmware but i see some mentions which i should not flash the MCU.
I just saw this thread...
https://forum.xda-developers.com/an.../comprehensive-updated-mcu-list-mtcd-t3476880
Seems like its just about placing the img file to the root of the sd card
rickbath said:
Hi All,
I have been reading up a number of threads and would like some guidance of how to update my headunit.
Ive purchased a preowned car which it came with the Headunit. It is a VW Jetta (2015 model) not sure if its the stock unit.
As i cant find the model, i understand that might be difficult as it needs to match the resolution.
I have some details below:
Model Number: S07 (not sure which brand that even is)
MCU version: MTCB-KGL-v2.5.5
Android version: 4.4.4_01062015
CPU: Arm v7 1.6Ghz
Memory: 1024mb
I know i will need a KGL firmware but i see some mentions which i should not flash the MCU.
Click to expand...
Click to collapse
ive just tried to flash it but have a problem when i entered the bootloader mode.
It mentioned unable to read sd card. Any ideas?

Winca/Roadnav S200 PX5 ZHAN_(NOR) MCU & firmware (Opel Astra J)

Hi guys. Maybe and hopefully someone of you can help me here.
I bought a used Android system based on the Winca S200 with ZHAN_(NOR) MCU for the Opel Astra J. While looking for new system software I stupidly flashed a newer system version, but the wrong MCU, so that the canbus box and all vehicle information are no longer recognized.
I therefore urgently need the system software with which the device was delivered (I have attached photos of it.) Does anyone have a dump or backup of this firmware and MCU? The dealer from whom the device was purchased also no longer offers support for these devices.
Android version
8.0.0
Build number
px5-userdebug 8.0.0 OPR5.170623.007 eng.bsp. 20180411.192159 test-keys
Information of the system
APP 1024x600 2018-05-07 11:19:58
CPU info
CPU: ARM Cortex-A53 eight-core 2+32G PX5, GPU: PowerVR G6110
MCU version
2018-04-16 17:04:06 ZHAN_(NOR)__90_C9RD6686_CAN(A)PX5D1804160
DVD version
2018-03-26 16:08:56 R-86C-096I-NC-NP-1.0-PI2S
BT version
BLINK_8723DS_RELEASE/2018:04:02:18:14:50
CAN version
V2.32.000BYPTDA
droidmanuser said:
Hi guys. Maybe and hopefully someone of you can help me here.
I bought a used Android system based on the Winca S200 with ZHAN_(NOR) MCU for the Opel Astra J. While looking for new system software I stupidly flashed a newer system version, but the wrong MCU, so that the canbus box and all vehicle information are no longer recognized.
I therefore urgently need the system software with which the device was delivered (I have attached photos of it.) Does anyone have a dump or backup of this firmware and MCU? The dealer from whom the device was purchased also no longer offers support for these devices.
Android version
8.0.0
Build number
px5-userdebug 8.0.0 OPR5.170623.007 eng.bsp. 20180411.192159 test-keys
Information of the system
APP 1024x600 2018-05-07 11:19:58
CPU info
CPU: ARM Cortex-A53 eight-core 2+32G PX5, GPU: PowerVR G6110
MCU version
2018-04-16 17:04:06 ZHAN_(NOR)__90_C9RD6686_CAN(A)PX5D1804160
DVD version
2018-03-26 16:08:56 R-86C-096I-NC-NP-1.0-PI2S
BT version
BLINK_8723DS_RELEASE/2018:04:02:18:14:50
CAN version
V2.32.000BYPTD
Click to expand...
Click to collapse
hi
can you take photos of serial number i have been dealing with this type of head unit , i wish i can help , just send me the serial number , since mcu and software is different
mustafaspirit said:
hi
can you take photos of serial number i have been dealing with this type of head unit , i wish i can help , just send me the serial number , since mcu and software is different
Click to expand...
Click to collapse
Of course, but where to find it?
Attached a photo. That's all I have. I hope you can help me.
mustafaspirit said:
hi
can you take photos of serial number i have been dealing with this type of head unit , i wish i can help , just send me the serial number , since mcu and software is different
Click to expand...
Click to collapse
Finally two more photos. The first from the device itself, the second from the touchscreen. I really hope you or someone else can help me.
Hi .
I have sheet of links for different models Your model is not included in my sheet of links of different models .
The software process is to have two steps ..
First software ( android system).
Second software is for mcu that much your canbus type related to your car model..
Here are the models i have in list if you think you can check one of them i can share with you
@mustafaspirit
Well, I think there is no similar software for my unit... do you have other sources maybe?
@mustafaspirit
Short update. I got the MCU from Renault Kelos (W329A) now from another xda user here. This MCU is exactly the same as mine from factory. And my Canbus-Box was detected again, too.
But I'm still on search for the factory system software. By the way, what do you think where to trying to get it? Even you could not get support? I tried to contact Winca/Roadnav, but they did not response until now.
check with the russian model farCar I used its firmeware and MCU for my S300 and it was exactly the same. https://far-car.ru/garantiya_i_servis/
Unfortnatly I can't find any official firmware for Winca to update with. If any has it please share.
I have winca s300 and I have a problem with the mcu and I contacted winca and did not find a response and I want that mcu "zhan_53_c63l_g32190000d5" ver:1.0

Android 10 Firmware Junsun v1 4GB + 64GB

Hello,
In May 2020 I bought this head unit from ali express:
Junsun V1
Android 9
4GB + 64GB
Wifi + 4G dongle
1024x600
With Apple Carplay (Z-Link)
CPU:
Intel X86_Octa-Core 1.8GHz [email protected]
Build-number:
OPM2.171019.012 release-keys
MCU Version:
2019.12.24 13:48:27 NOR_53_L82_G23P48F64_V:1.0_FYT
Now I would like to update this head unit to Android 10, but I can't find any firmware or even identify the kind of device this is to search firmware for it. I asked Junsun, since they are now selling the device with Android 10 pre-installed, but they say it will not work on my device since the hardware changed.... :/
Is there anyone that can help and tell me how to upgrade my head unit to android 10, if this is possible?
Thank you.
+1 I love this radio but look the message :
hi friend I’m sorry that the version you purchased is no longer on sale. Its chip is different from the radio chip we sell now. Therefore, we do not have the appropriate documents for you to update. Moreover, It's not suggested to refresh firmware if the device works well, the radio may stop working if refreshing firmware doesn't succeed. Hope you can understand
Click to expand...
Click to collapse

Categories

Resources