[SM-P600] Many problems, for just an update - Galaxy Note 10.1 (2014 Edition) General

Hello everyone,
I own the samsung galaxy note 10.1 edition 2014 and for some years now I have not been able to use it properly. When I put the tablet to charge, I have a red cross on the battery. Following much research, no proposals have allowed to fix the problem. I notably changed the battery, the charging port as well as the cable and the charger (while all the original components seem to work).
On one of the forums, I read that changing the rom and updating it on lineage on android 7 could have solved the problem. It also suited me because many applications that I use every day no longer work on the tablet.
So I try to root the tablet but once again a problem arises, odin cannot find the tablet in download mode. So I look at the device manager and I see that indeed on the usb port there is registered device descriptor request failed. So I go back to the forums, I try again a multitude of soultions that do not work as installed, uninstalled, reinstalled the drivers. Make manipulations in windows. Change USB port, cable. Activate debug mode or not. I even put the old charging port back. Nothing to do I always have the same message.
I also thought to myself that it was because I can't choose MTP mode on the tablet, I tried to do some research, I couldn't find anything conclusive.
So I'm in dire straits, I'm waiting for my savior :crying:
Thank's in advance for answers
Sincerelly
Ps: My tablet is in kitkat version and I cannot switch it to the lolipop version because I have a message telling me that the tablet has been modified.

Related

[Q] Can't Connect to any PC/Possibility to go to stock without USB

Hi guys,
I have a massive problem.
I recently updated to 4.3 rooted etc, after a few days of not using my nexus 7 on the pc I wanted to flash a new rom.
Now my N7 is only shown as an "Unknown Device" in my Device Manager.
I tried to deinstall Drivers, install, everything, I tried every possibilty in Wug's toolkit, nothing worked. I also tried it on another Notebook where i have never connected any mobile device, same message and i'm not able to install the drivers.
I also tried several ports and cables(the original one included)
Here is the message:http://i.imgur.com/tgxOeZQ.jpg
Translation: The optimal driver software for your device is already installed.
After this I flashed back to 4.2.2 (downloaded the rom on my N7) while performing a normal factory reset, I can't wipe everything because then I am not able to flash anything.
So after flashing to 4.2.2 my N7 was shown as a portable device in my device-manager. I then turned on USB-Debugging to stock+unroot, it was then shown again as a Unknown device, in both modes, USB-Debugging turned Off and On.
So now my question, is there a solution to this? I searched for possibilites to get back to stock without USB but most of them were a bit sketchy or had dead links. Please help me (sorry for my bad english)
Edit:
I just the cable of my old Motorola Defy, and it randomly connects and disconnects(still shown as unknown), so basically I think it is possible that my USB plug is broken(it takes about 6 hours to load the battery which I think might be as well a reason for a broken USB plug).
But to send it back to Google I need to Stock Unroot first so here my problem is again!
greetings

[Q] LG G2 USB Not Recognized

Hi, background is this..
I have a D802-10C G2 that i rooted the stock 4.2.2 rom a while back using the post chinese method. Easy enough, all worked fine. no complaints. A couple of weeks ago i got offered the OTA 4.4 update, this failed due to the root. I then removed the root using the feature in super su. that seems to have worked as no apps or file managers etc could get root access. However, the OTA still wont work.
Now my problem is my phone will no longer be recognized by any operating system, on multiple computers. I have tried many ADB drivers, Windows 7 wont even detect the device, i've used every PC connect mode, USB debugging. However always the same result, it's as if i'm plugging in a blank usb cable into the computer. Nothing at all.
The only thing that does happen when i connect the phone to a computer is the phone starts to trickle charge. There is nothing detected in Device Manager in Windows 7 I've tried connecting in download mode, nothing. I've tried the LG support tool, PC sync. Nothing.
WiFi does connect to the PC suite fine BTW and other than that the phone is working perfectly. I've also tried connecting multiple usb cables on multiple ports.
I haven't been able to find a single case of the same problem in the week or so i've been looking. Hoping someone can help, i'm thinking i may have soft bricked my phone. I really do not think this is a driver issue.
Any help would be great. cheers
Paul
+1
i have the same problem plz help
cambies said:
Hi, background is this..
I have a D802-10C G2 that i rooted the stock 4.2.2 rom a while back using the post chinese method. Easy enough, all worked fine. no complaints. A couple of weeks ago i got offered the OTA 4.4 update, this failed due to the root. I then removed the root using the feature in super su. that seems to have worked as no apps or file managers etc could get root access. However, the OTA still wont work.
Now my problem is my phone will no longer be recognized by any operating system, on multiple computers. I have tried many ADB drivers, Windows 7 wont even detect the device, i've used every PC connect mode, USB debugging. However always the same result, it's as if i'm plugging in a blank usb cable into the computer. Nothing at all.
The only thing that does happen when i connect the phone to a computer is the phone starts to trickle charge. There is nothing detected in Device Manager in Windows 7 I've tried connecting in download mode, nothing. I've tried the LG support tool, PC sync. Nothing.
WiFi does connect to the PC suite fine BTW and other than that the phone is working perfectly. I've also tried connecting multiple usb cables on multiple ports.
I haven't been able to find a single case of the same problem in the week or so i've been looking. Hoping someone can help, i'm thinking i may have soft bricked my phone. I really do not think this is a driver issue.
Any help would be great. cheers
Paul
Click to expand...
Click to collapse
YOu can try checking the device manager or use other USB port on your phone.
buenarc said:
YOu can try checking the device manager or use other USB port on your phone.
Click to expand...
Click to collapse
The problem is not like the usual ones you will see about "computer not being able to see device" I don't think it's a driver or software issue, or if it is it's unlike any i have found in the weeks i've been searching the net for a solution. Here's why....
When i connect the phone to Windows 7 and 8 ( on 3 different computers) No hardware is detected, nothing in the Device Manager, no yellow question marks indicating 'Unknown Hardware'. Nothing, all it does is start trickle charging.
Now even with no ADB, or any driver at all installed, the computer should still detect the phone. Mine does not.
The same thing happens using OSX and Linux Mint 16 (again multiple computers) No devices or mounted or volumes shown at all. Linux terminal command "$ lsusb" does not list my hardware.
This is why i'm pretty much convinced that there is something wrong with the USB port on the phone. Because, if Linux can't see it then surely it's a hardware problem right?
The only other thing i can think of is, i have messed up the phones firmware while trying to unroot it? but only because the timing of all this is just too uncanny.
I think i'll have to suck it up and admit defeat here. Funny thing is the phone works perfectly and charges fine.
Stuck on 4.2 , with no ADB functionality. Perhaps i'll sell it cheap to someone who doesn't care.
Cheers for the reply mate.
Same problem here!
Only my G2 is not rooted, it is still on factory OS and recently updated to 4.4.2.
I have tried on several computers, different ports and no help.
On the first connection to a PC not connected before windows reports "USB device not recognized" problem.
After that every time I connect the phone to the same computer the phone itself only recognizes that it is using USB charging mode, it does not recognize the computer connection (known by the USB ison on android system tray) even with "Ask upon connection option checked".
Even when I manualy change the Android mode in Settings --> PC Connection from MTP to PTP or even LG software, nothing happens.
Definetly there seems to be a problem with the phone, but I don't beleive it's a software but a firmware problem.
Please help if anyone knows what to do.
same thing happened after installing T-mobile rom thrugh twrp. but my device boots into fastboot and i tryed falshing :
laf.img, boot.img, aboot.img, recovery.img, laf.img
but after reboot my LS980 dissapear from device manager and stucked on LG logo.
Dont know what to do now.
I'm no expert, but given there are a lot of them here and none have weighed in on this with any ideas for a fix, i'm going to assume it's a hardware problem.
Anyone else agree? Hardware problem not software?
Cheers
I guess that you already wiped everything right? Apart from that, i'll suggest you to go to some tech supp and ask them if they can verify that each pin of the micro usb is properly working.
Sorry for my english, hope it helps!
Sent from my LG-D802 using XDA Free mobile app
I will try to check the connector although i dont think that it is a hardware issue.
BTW I can enter the download mode after flashing the mentioned partitions and i can also enter the stock LG recovery but when i do the factory reset it keeps showing Factory reset processing ... for ever
It has happened to me the same thing :crying:, and is a problem with the boot.img, if by chance your G2 version 4.4.2 and the the 4.2.2 boot.img, goodbye.
The only solution is to take it to repair a service official, there will change you the card, with the consequent change of IMEI.quent change of IMEI.
Homero2 said:
It has happened to me the same thing :crying:, and is a problem with the boot.img, if by chance your G2 version 4.4.2 and the the 4.2.2 boot.img, goodbye.
The only solution is to take it to repair a service official, there will change you the card, with the consequent change of IMEI.quent change of IMEI.
Click to expand...
Click to collapse
where are you going to repair your G2?
and how much have you paid the repair?
THANKS
Any fix for this guys i have same problem!
Here I'm getting the yellow !, any suggestion?
Sirs, I flashed the baseband (https://www.androidfilehost.com/?w=files&flid=12880) then it got working back.
solved for me
I have some kinds of that problem, let try:
Settings -> General -> PC Connection -> Select USB connection method -> Media device (MTP) (or whatever)
Got this same issue after flashing cloudy g3 rom. Then later flashing dirty unicorns, which requires jelly bean baseband. But even restoring g3 and 24a baseband, still doesn't work. No pc tethering and no on the go usb. My usb port is basically charge only.
---------- Post added at 03:58 PM ---------- Previous post was at 03:56 PM ----------
Everything else works fine...I actually never even noticed this bc I never tether to pc. But now I have to bc I want flask kdz
Help me please
someone have a solution to this problem?
My Lg G2 D803 still on boot loop (LG logo) and thats all ... no usb connection , reset factory doesnt work ...
HELP PLEASE ...
Thank you
Anyone has an idea how to fix this problem?
same problem
I have a LG G2 . recently updated from vs98027a to vs98039a 5.0 lollipop. Since the update my computer won't recognize my device in download mode and I don't have superuser ppermissions. Help plz
I also have the same problem.
It happened when I tried to backup info through LG PC Suite: the phone disconnected during the process, and now it's not recognized by any PC (http://forum.xda-developers.com/lg-g2/help/lg-g2-recognized-windows-backup-t3155323).
Also found a description of the same problem here: https://www.reddit.com/r/lgg2/comments/2urpnw/lg_g2_usb_only_charging_not_recognized_by_pc/ - no solutions, too.
Did anyone manage to fix this?

[Q] D802 not recognized with USB

Good evening,
I bought a second-hand LG G2 32go, and I realized that it had been rotted by the previous owner (while I had asked him if the telephone was "blank" of any root).
In brief, the telephone is never detected on any PC (tried on different 2, with various drivers) by USB (I just manage to see it in WiFi).
In normal mode (phone started), with the good parameters (Synchronization Media and Debugging USB): no LG tools detect it. I tried with several cables, several PC, several drivers.
I have access to the download mode (it is here I realized that it was rooted): still not detected by Flash Tool.
Hard Reset tried unsuccessfully.
The Android version of the phone is 4.4.2 stock, Pit version 3.4.0, Build KOT49l. D80220b and software version D80220b-EUR-XX.
I'm appealing to you because in my researches, I found cases of defective USB cables, bad configuration, or still " I found, that works !" but which do not share the solution
I had a S3 before, with whom I spent hours of research, but with G2, I am too fast submerged by links and too numerous solutions and I do not find myself there any more.
Then would you have an idea or a solution to help me ? I just want that phone to be detected by USB.
Thank you very much beforehand
Try to clean the usb port
_____________________________________Read more write less and be smart
Hello,
Thank you for this suggestion. Still nothing happen when I connect it.
I have read a lot, so I could write more, so you would have less casual questions, so we could lead to a solution faster.
Any other idea please ?
Usb on the go works?
_____________________________________Read more write less and be smart
same problem here i can't find a solution

Note 4 N910C sudden USB Hardbrick, no charge, still booting fine into Android

Hello XDA, my virtual phone heros, i appreciate your good work, i am reading here for a few years as a ghost and today i signed up because i am lost with a serious problem on my Note4 N910C (English is not my native language)
THE CONDITIONS AND ENVIRONMENT:
My Phone was first running on stock Lollipop 5.1.1 when i rooted it over ODIN 3.10.6 with space X kernel and CF Autoroot, SuperSU then i flashed the latest TWRP...
After that i flashed a Custom Rom: Sweet_ROM_V17.1_COJ2_N910C...
Everything was running flawlessly for about 2 weeks...I installed Titanium Backup, Xposed, Xprivacy Pro, Busybox and a lot more and made a complete TWRP Backup then, it was running like a charme...The backup is fine because when i messed up my phone through trying harder xprivacy parameters and other tweaking i needed to set it back by TWRP into the old state...
Nothing happened after that, it was running 100% for over a week of heavy usage...
THE PROBLEM:
The one morning i took it from the charger with 100% Battery and went to work...
Before the error occured I did some searching on the internet, used chats. movies, nothing special this day, USB Debugging was On, i remembered something messed up my chrome browser like this ad hijackers, i set it back by erasing data,cache of chrome in the app menu, then there was nothing else strange i remembered, my AF Firewall was closed, only Whatsapp and Browser were allowed to going through...
The same day in the afternoon i tried to use my car charger to recharge my Note 4 as usual, but this time it wasnt recognizing the charger and my first thought was that the charger is faulty or the cable, so i turned off the phone by the androids power menu...I retried loading my battery In the phones off state but when i plug in the charger, the battery symbol came up for short and then it remained dead, it s the same scenario until today, so i used my powerbank to try charging, because the powerbank has an indicator to show the loading state and everytime i plugged it in, it came up for short, battery symbol shows up for a few seconds, but no percentage or animation is showing as usual and no red LED, then its switching off, the powerbank LED indicator stops the loading state after a few seconds, so the loading current stops...
At home i tried the stock charger and it remained the same, since that, i have to charge the battery outside the phone...
The strange thing is:
The Rom is still booting fine, TWRP is booting, but its not going into download mode from Androids Power Menu like before, its always just rebooting back into android if i choose download mode and i have to take the battery out and back in and hit the download mode pattern Vol- Home Power, to enter Download Mode and even the booting into Download mode from TWRP gives the same strange results:
On my Laptop i started the device manager to see the USB hardware string parameters after a windows popup was telling me something like "Device not recognized"
The USB Driver ID dont fit the old right driver ID, it seems to be empty and the port is not communicating anymore
since the charging bug occured,( Everything worked fine the day before.)
I tried my Laptop to narrow down the bug with the same driver i used for flashing phones (S6,910F,910C) over ODIN and my Lappy has USB 2.0 and USB 3.0 ports.
I always used the same USB 2.0 port for ODIN and other MTP stuff, but since the bug showed up the 910C is not recognized at the USB 2.0 Port anymore, seems to be dead in the devices manager table, only the USB 3.0 Port shows it as unknown device with a strange empty ID --> I tried the other devices like the N910F and G920F that are still recognized by ODIN on the same USB2.0 and 3.0 Ports both with the same USB hardware strings, its just the N910C that isnt recognized anymore, in no mode, no ADB, MTP, no download mode, everywhere the same, USB is bricked! Windows finds no driver and says its no info avaiable on this device so I tried to force the right driver to run with the wrong buggy driver ID but its not communicating, ODIN indicator and log remains unchanged...So it seems to be the same situation like other people getting from killing the bootloader by bad flashing, the only difference is that my phone is still booting fine into recovery and even Android but with no charging. My USB Port is totally useless now, its like if Samsung or Google OTA update has overwritten my bootloader or something hidden in the rom that woke up to kill my mods i dont know and now.
PS: Things i tried so far with no results on fixing my issue....
1. Complete fresh reinstall of Sweetrom, 2. Flashing another kernel...
3. Roll back to my TWRP Backup of perfect running ROM but with no USB support anymore:
The Phone remains in unknown state, not affecting ODIN to switch into flash mode
I am sure its the bootloader, since its battery bug is still occuring while the phone is in off state...
Unable to tell the charger the right ID without USB communication...
i was wondering if there is a solution to make a bootloader hotflash from out of Android or something like getting me back on stock first with download mode, forcing the USB ID or communication with a tool out of android, SD card boot image like on note 3 whatever, please tell me! I cant find something related to my USB and Charging ISSUE
PLEASE HELP ME, I am lost
Still the same. It's booting fine, USB2.0 no reaction on the laptop in Fastboot/Adb/Mtp ... On USB 3.0 Device remains unknown with strange Device ID String in windows 10 hardware Manager... Forced the old formerly working driver, but Odin can't find it anymore... Adb, Mtp, fastboot don't work, no communication... USB Cid is hard bricked, Charging never works in no state, just showing up for a few seconds in off state while plugging it in for short.... Bootloader must be damaged, fastboot and twrp can be started with dead USB... So is there a way to run a boot image to fix my bootloader from SD card, Aroma, or like OTA Updates are flashing? If Samsung and Google apply bootloader updates over OTA and simply restart, why we can't do that??? I need a new bootloader, is there any way without USB?
Greetings,
Thank you for using XDA Assist.
I have moved your question to your device's Q&A forum. You'll receive expert advice here. Good luck!
Fixed!
The problem is the USB Connector Port itself, figured it out after bending the inner contacts up with a flat screwdriver and cleaned them. Before that i always tried the same gently with no change, but please do it at your own risk only. After searching for many hours about possible reasons for the problem, I came to the conclusion to even compromise the Port and heavy bending it up, now it's charging! I will exchange the port soon and change the frame too to have it back like as new... OK, if anyone in the future have problems with the bootloader or USB hardbrick n910c, feel free to ask me, I upgraded my knowledge on many causes now
Thank you very much
My 2cents stick to one charger. Do not share that charger with others.
The worst culprit are the cheap china car chargers.
I went thru two USB ports on my first phone to figure this out.
Ever since I have adopted the policy of using only one cable. Never had this issue.

Unknown USB Device (Device Descriptor Request Failed)

Hello guys,
after trying everything I could imagine and find on the net, I still didn't get my PC to recognize my S6 edge plus.
Hopefully someone od you has got some more ideas.
The Problem:
Connected Phone shows "Unknown USB Device (Device Descriptor Request Failed)" in the device manager. No MTP connection and no ADB possible so far.
Done so far:
Samsung USB Mobile Drivers
Kies
Smart Switch (with reinstall of drivers)
6 different cables with 4 PCs (2 Win10, 1 Win7, 1 Linux)
USB-Debugging on / off
*#0808# switched through every mode
USB-Hub drivers
Factory Reset
More Info:
5 of the 6 cables are working just fine for data connection with my S3
There is no infobar tooltip to change USB mode at all, just telling me it's loading
In Download Mode the phone doesn't get recognized by Odin (with same cord and USB Port the S3 does)
In Stock Recovery Sideload Mode the Device does not show up in adb devices (with same cord and USB Port the S3 does)
Regards
up
I'm guessing you have downloaded and installed the Samsung drivers?
New Infos on this case:
Local tech support inspected the phone. They suspect the mainboard to be defective due to corrosion signs.
Of course the repair cost would be ridiculous.
I'm gonna repair it myself, but I'm not quite sure if it's really a faulty mainboard.
I rather think of changing the USB board first, because it's like a 10th of the mainboard and more likely to get wet if that's the reason for the damaged phone.
Any ideas??
Regards
You didn't mention if it charges via USB?
Im in the same situation..
charge via usb but is not able to recognize the phone in any computer (a lot of different cables with 3 PCs)
My unit was wet and i think that something is wrong for this reason.
Hello friend my s6 edge plus demo with smokkierom last day not working ota,
I have activate developer mode for check control usb, but not have possibility for change other mode. Is fixed to mtp mode and not possible change other type.
I have deleted more app. And have chek update for play store.
I have press multiple tap and have activate developer mode to play store.
My idea is phone have one one virus....ajaj
I have reboot the phone with charger connected, and at reboot I have recevied FRP LOCK!!!!!!
Question one.... is possible recovery data?
A this time need connecting with Odin for upload twrp... but pc not find my phone!!
Working only charging.
And have error unknow devices. And not install driver..
Device not have USB ID and PID
My phone have hardware problem?
Best regards thank s help support
Fix
Cento50 said:
Hello friend my s6 edge plus demo with smokkierom last day not working ota,
I have activate developer mode for check control usb, but not have possibility for change other mode. Is fixed to mtp mode and not possible change other type.
I have deleted more app. And have chek update for play store.
I have press multiple tap and have activate developer mode to play store.
My idea is phone have one one virus....ajaj
I have reboot the phone with charger connected, and at reboot I have recevied FRP LOCK!!!!!!
Question one.... is possible recovery data?
A this time need connecting with Odin for upload twrp... but pc not find my phone!!
Working only charging.
And have error unknow devices. And not install driver..
Device not have USB ID and PID
My phone have hardware problem?
Best regards thank s help support
Click to expand...
Click to collapse
Cento50 said:
Fix
Click to expand...
Click to collapse
Hi Cento50. Have You managed to get the phone to work? At first my phone was showing up in "This PC" on Win 10. but after trying Samsung usb drivers to get Odin3 working now it is the same as Yours. Shows in Device Manager as: Unknown USB Device (Device Descriptor Request Failed). A strange Conundrum.
Hello @Photobil2012 yes fix habe worked!
One little wire have replaced 2ohm resistor.
And have fix fast charger and data comunication with PC!
We i have repaced first one diode.
Phone a this time work complete.
First this problem i have connected one hard disk to otg cable with phone battery low!
My suggestion Please caution to use otg interface with high current if have low battery in the phone.
This cause high current drain and possibile burn diode and resistor.
Hi Cento50,
Alright! Thank you very much for the most timely reply and tech info on the successful fix. This is very good news to receive. I just replaced the battery so it is brand new and that works fine now. However, if it is necessary I can apply the same type of fix that you applied. Great work, and thanks again for your help.

Categories

Resources