Database Users

Dual sim KING OF DOUBLE CARD with MDA Compact

Hi there,
Some time ago I purchased a KING OF DOUBLE CARD for my MDA Compact. It seems however that this card is not functioning in my PPC.
I am using a MDA Compact with the original T-Mobile ROM. I only partly installed the cabs because I wanted to get rid of the ugly T-mobile colours.
Could someone please provide me with some help?:
1st: does anyone make use of the KING OF DOUBLE CARD
2nd: What Rom do you have
3rd: Do I have to install something in addition?
etc etc.
Thanks in advance for your help!
Best regards
Wilfried

dont know any answers, but I do have a question...how did you make it fit?
I thought it didnt fit in the HTC Magician....so I bought another and carved up my SIMs
works fine though, using Wivit SIm Status Switcher with it to switch SIMs..
you could try it, its a great app

which model did you buy? what do you mean by "carved up my SIMS"?

He probably means a ghost sim, where you cut the chips out of two sim cards and out them into the ghost sim which is normal sim size.

Hi there,
It is a model where you don't have to cut your sims.
Yes you are right: it doesn't fit that easy however with some pressure on the back of the phone it fits.
The problem however is that my phone doesn't recognize the damn card.
I am cosidering to throw it away and take a second phone with me for the other SIM. Again waste of money. hmmmmm
Best regards

Hi there,
It is a model where you don't have to cut your sims.
Yes you are right: it doesn't fit that easy however with some pressure on the back of the phone it fits.
The problem however is that my phone doesn't recognize the damn card.
I am cosidering to throw it away and take a second phone with me for the other SIM. Again waste of money. hmmmmm
Best regards

Hi there,
It is a model where you don't have to cut your sims.
Yes you are right: it doesn't fit that easy however with some pressure on the back of the phone it fits.
The problem however is that my phone doesn't recognize the damn card.
I am cosidering to throw it away and take a second phone with me for the other SIM. Again waste of money. hmmmmm
Best regards

Double SIM work fine on my XDA mini
Hello all,
Just want to share some info, I use Almighty Bicard on my XDA mini, and it's working fine on it, just turn on your flight mode, then turn off your flight mode than you will get your second SIM.
Or you can use SIM master or SIM MAX, it can handled 8/12 SIM no. on 1 SIM card, but some time you have problem to scan your original SIM card.
Thanks, Vireman

Can you point me to the specific dual sim you use??
I bought the ghost sim and couldn't get it to work, I tried on 4 old sim cards and decided not to cut up my work sim and personal sim.
I have been looking for the other typoes which take the full sim cards.
On another note it may not work because you will need to get the T-Mobile phone unlocked to work with another companies SIM.
My work sim is o2 and would only work after the MDA was unlocked.
You can phone T-Mobile ans they will send you the code to do this for £15.

Hallo ishgrnod,
I use Almighty Bicard, You need to cut your SIM chip and put it together on Almighty Bicard. It work like a switcher, If you restart your phone it will switch to another SIM.
Mostly in my country there no phone lock from the operator, I think your problem come from this side.
Thx. Vireman

Isn't there a universal phone unlocker already on the forums?
I use this cut up dual sim in the UK:
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=6415916094&rd=1&sspagename=STRK:MEWN:IT&rd=1
from this user:
http://feedback.ebay.co.uk/ws/eBayISAPI.dll?ViewFeedback&userid=slam1416&iid=6415916094&frm=284
Works fine. Just have a steady hand when you cut, measure twice, cut once
I use an O2 contract and orange PAYG. Some reports say O2 contract doesn't work. Mine does, no problems.
V

I bought a King Of Double Card for my MDA Compact. I cannot get it to fit at all.
I don't really want to chop up my SIM cards either :?
OK, UPDATE:
I got it to fit but the phone will not recognize the cards. I'm using WiViT SIM Status Switcher.
Can anyone suggest recommend a different tool ?
I'm on
ROM Version : 1.12.00 WWE
Radio : 1.12.10
ExtROM : 1.12.131 WWE

WiViT isn't likely to be the problem - it just reads the operator from your network, and the sim phone number stored in your Sim; you may not have one stored in there (I bloody didn't and thought my EVC programming was at fault). See WiViT's faq, or basically open up Sim Manager on your phone.
But, ignore wivit, just ensure you can make a telephone call with either sim. Then, switch over with STK or flight mode off/on and see if you can make a call with the other Sim. If that works, then your problem is with WiViT. If it doesn't your problem is with the sims. See my other posts on these cut up sims - basically, i think Magician doesn't put enough pressure on the back of the "mini sims", and you need to stick some paper down the back of the metal sleave.
V
PS See the thread on Magician today screens to see my Wivit type software...

Hey V, thanks for the advice...
My problem was down to the single SIM end of the Dual SIM not making contact with the connectors in the phone. I have the King Of Double Card Type, as shown in my crude mockup below. ( I dont dare take mine out to take a picture since it took me all evening to get it in right. So please excuse the picture.)
WiViT is working perfectly now, i made sure my own numbers were stored correctly as you suggested, and all is well.
The only problem is, the back of my MDAc is slightly out...but i can live with that i guess (until the MDA Pro (HTC Universal) is released)
8)

Dual Sim Cards

Did anyone try these dual simcard adapter in a wizard, I got one and maybe the software will not fit to windows mobile 5 but the changing between the two providers last endless, sometimes it needs a softreset to get a connection... need help
cheers

I do use a dualsim adapter without problems. Changing between te two SIM's never lasts longer then 3 to 5 seconds.
Have you tried the adapter in a non WM5 phone?
Cheers,
Cactus

where did you guys get these dual sim adapters? didnt even know they existed, quite interested to have one!

Hi,
http://www.magicsim.com/english/index.asp?new_id=27
They have got all kinds of solutions. I tried the MagicSim16 (16 SIM's on one SIM) but that didn't work, so I had to fall back to a DUAL SIM adapter.
Regards,
Cactus

le_cactus
Could you post some more references of the dual sim you bought? even a pic to let us identifiy the correct sim in ebay? Thank you

Hi,
I bought the 7th Era Dual SIM adapter. It's the one where you need to cut your sims. I figured the 8th Era solution wouldn't fit in the Wizard without doing harm to the case. I also tried the 9th era but I couldn't crack the encryption from my Orange SIM, the T-Mobile SIM however wasn't a problem at all.
A warning: If at all possible buy a duo SIM from your provider and cut that to pieces. I cut up my TMO SIM and it doesn't make a good connection with the SIM adapter. Luckely I still had the 9th Era card that I cut up with no problems so I'm using that inside the 7th Era adapter.
B.w.t. the 9th Era SIM card also worked with the Wizard. It's the best solution imho, but you need to be able to crack the encryption of your original SIM and as I understand it Vodafone and Orange SIM use a newer encryption that can't be cracked.
Hopes this helps,
Cheers,
Cactus
Hopes this helps.

Hi,
I also have a Wizard and use the MagicSim. I found that the problem is the Radio version. I have the MDA Vario by T-Mobile Germany. The shipped Radio version is 1.40.10 and have no problems with the DualSim.
Yesterday, I tested a newer OS Version shiped:1.3.2.5 (T-Mobile) new Version:1.3.7.11(Qtek). And then I flashed the Radio from 1.40.10 to 1.12.10. I tested my dualsim and nothing was happend, only i restart my wizard.
Than i tested another OS 1.5.4.2 with Radio 1.13.10 and 1.12.10 with the same problem. Than i restore the Radio to 1.40.10 and the dualsim works perfekt.
i hope u understand my bad english
Good luck...

dual sim card
now everything works fine, i don´t know if this comes from changing the network-choice of the handy: I had been in Austria and changed this item into manual ( from automatic). now I put back the old "automatic" modus and the simcard (or the wizard) finds a net in about 15sec... so changing from one card to the other is no problem..
But the backpart (Idon´t know the englisch word) will no longer fit perfectly, but it is only 2mm higher on one side.
cheers
Hunter

I ordered a dual Sim from Ebay a month ago and received it a week later. Unfortunately I cannot get it to work. It just doesn't fit right, the stress on the battery cover is quite heavy, since the cover is under stresss from sticking out so much. I am afraid the plastic bits will break and the cover will become useless. The stress is caused by the thick little black chip in the adapter, that does not fit into the sim slot. Also I cannot get the adapter to work, the Vario reports an invalid Sim. This can be due to a defective adapter ( caused by me twisting it while trying to fit it without the battery cover being stressed) or by my ROM version or even the T-Mobile Simcards, which have been reported not to work with dual sims in some threads. I previously tried a cut-out dual sim in my Magician, but no dice, the wretched thing would not work. my simcards still worked, but the Magician kept seeing invalid sims. Probably also a case of my destroying the little bugger ( I am not very carefull I guess, but of an impatient guy who cannot handle those cheap ass fragile things).
Ok, my question is: can someone post some pictures of the way they fitted the adapter and how much the battery cover is sticking out?
It would help me big time in deciding if I will try a third time to get it right. thanks people!

I recently bought a MagicSIM from a German eBay seller (http://stores.ebay.de/CironStar) including cutting service. Three days after sending him my two SIMs, I received it back yesterday and it works great in my Wizard!
What I like especially is, that you don't have to enter your PIN each time when switching the SIM.

I still fear those cut-up job ones... even if they do it for you; one wrong move and *snip* goes your SIM - have fun explaining that to your operator :/
I see they now offer a no-cutting-involved version as well. Has anybody tried this type ? It seems like it'd at least double-up in thickness, and there's a chippy bit that goes outside of the area where the SIM goes which definitely looks like it'd get smushed by the battery.. so I'm sceptic

what is the main purpose you guys use a dual sim adaptor? is it because u need to travel from country to country all the time? Another question is, once u have fitted two SIMs in your phone, can they BOTH receive calls at all times if someone called u on either number?

toneslee - yes, dual SIMs auto-switch the active SIM from time to time, and you should be able to receive calls, text messages, etc. on both.
My main reason to do this would be so that I can drop both my vodafone and lebara sims into the thing. Lebara is nice and cheap for my international calls (work, girlie, etc.), but is stupid-expensive for national calls - so I'd like to use my Vodafone for that.
Right now that means I have to keep two phones Which isn't tooooo bad.. but if at all possible, I'd rather just keep the one.

@ toneslee: You CANNOT receive calls on both Sims simultaneously. Your device has only one GSM radio and can handle connection to the GSM towers,data and voice from only one SIM at a time. What the dual sim adapter that ZeBoxx uses can do, is automatically switch which SIM is in use every 1 to 30 minutes, thereby trying to catch as much calls in both numbers as possible. But true simultaneous reception on both SIM cards is not possible. They cannot be active at the same time, so when one Sim is registered in the network the other is not connected and people calling that number get the same thing like your phone is off, e.g. voice mail.

correct Though I thought they switched a little faster than 1 minute >_<

I'm using a cut sim in my magician, although the "technology" is so basic, there's no reason why it shouldn't work with any phone. Cutting was fine, just do it carefully and use thin scissors. In my experience, there's still enough "space" to make a mistake and for it to still work. You have to be quite unsteady to screw it up and slice right through the middle of the "chip" in the mini-sim.
The only problem I had was that the sim was now too thin so I slid some slivers of paper between the metal sleeve and the mini-sims, and it works fine.
I have two numbers, one contract and one historic PAYG that I keep in case old friends don't have the new number.
V

Thanks for the explanations, guy. I understand now.

Anyone tried those
Hi
has anyone tried one of those multi super 16 in 1 sim card thingys..
basically a sim card that you can load with 16 identities...
+ a usb dongle thing to program it..
i was thinking about cloning my sim card so i can keep it in 2 phones one for work and one for when on the lash.

Supersim 16in1
yes, it works fine. I have 5 phone-numbers on it. but you're able to clone only the (old) v1 simcards.

ermm how do i tell ?
How do i tell what version the simcards are ?

Dual Sim problem

Ok, I have been browsing this forum for a solution to my problem and none seem too specific, at least for my BA wm6.
Here is the problem: I just received a dual sim adapter (the one that needs cutting) -both sims work fine. I can't get them to switch from one sim to the other from my phone. power on/off and flight mode won't do it either. I tried phone alarm, dual sim switcher, and wivit. They don't work for my phone. I also have a wm2003 se BA and tried it on there and I was only to get the dual sim to switch once. So now the dual sim is stuck on SIM2. So it doesn't matter which phone I use I can only use the sim that is on the SIM 2 slot! Blah!!
What I need: A program, or anything to switch my SIMs for my BA wm6. I don't want to keep taking out my sim and open the sim adapter and switch the two sims all the time.
Edit: after fooling around with my 2003se BA I managed to get the Dual Sim Manager to work again, and I noticed that despite switching SIMS, phone information alway display the default SIM. Does this mean that it is not switching? Does this mean that it does switch but the phone does not display it? If latter is the case then I am in big trouble! One SIM has unlimited internet and texting and other one is just a basic plan. Please help! I don't want a surprise bill!
Edit: Sorry, I needed an answer so I'm feverishly testing this crap out. And the answer is yes the sim changes but the phone does not display so. The trick I used is texting my account info and voila! Two different accounts! So, now over to my wm6 BA and check that out

I'm really surprised, that people are so patient to fight with such an uneffective and clumsy device as dual SIM adapter: you have to cut/destroy those SIM cards, then you have to pray that i works with your phone...
I really think, that if you really need to use 2 SIMcards, why not buying a 2nd phone, or just a special phone with 2 radios and for 2 SIMs.
And please don't tell me it's "for comfort" - dualSIM is antiComfort...

There are other solutions that you don't need to cut the sim, one that I have seen is the addapter is placed in the sim slot and the simm are part of the battery pack.
Bottom line is that that one sucks as well.
I feel there is a valid need in my line of work were I would need at least 3 laptops to support the Builds of my customers however VMWare gets me by fine.
As for the phone, I need 2, carry 2 and hate it.
So I would be a buyer if there was anything around worth having. (which as I still have a BA seems not the case).

Dual Sim Problem
Hi pharmeceutikle,
I wonder how this device works for BA at all!
I tried an adapter like yours of a friend of mine and it just doesn't work with my BA.After inserted, I don't see any new menu for it and when I restart the BA, it shows invalid sim message at startup. I have installed a WM6.1 ROM downloaded at this site [20749 (Build 20749.1.4.0 PV DVH) - v13] and my radio version is 1.12 (by the way, it was 1.15 but 1.12 is the only one that worked fine for my device). The same adapter, once installed on a Motorola phone of my friend works pretty fine! so, it's not a problem with the adapter, I guess...
Did you change anything on registry? could you please tell me how did you proceed since cutting the sims until you got it to work, please?
Many thanks!

JFLB said:
Hi pharmeceutikle,
I wonder how this device works for BA at all!
I tried an adapter like yours of a friend of mine and it just doesn't work with my BA.After inserted, I don't see any new menu for it and when I restart the BA, it shows invalid sim message at startup. I have installed a WM6.1 ROM downloaded at this site [20749 (Build 20749.1.4.0 PV DVH) - v13] and my radio version is 1.12 (by the way, it was 1.15 but 1.12 is the only one that worked fine for my device). The same adapter, once installed on a Motorola phone of my friend works pretty fine! so, it's not a problem with the adapter, I guess...
Did you change anything on registry? could you please tell me how did you proceed since cutting the sims until you got it to work, please?
Many thanks!
Click to expand...
Click to collapse
This dual sim adapter only works if you have a working STK ROMs. I believe I used Helmi's original wm6 as one of them and then I went to others but I can't quite remember which. I posted an experiment with the all the ROMS I used awhile ago so just do a search under my name. Anyways, I couldn't get it to switch sims normally so I had to reset the damn thing all the time. I would go to the STK menu and choose either sim 1 or 2 and then quit out and then reset my phone for it to make the change which really is a pain. As soon as my second sim ran out I just tossed the infernal thing and stuck one sim per phone! Sorry couldn't be much more of a help.

Thanks
Thanks anyway I'll keep searching for a while.

Sim card issue

Hello guys
I'm having an issue when my x10 says there's no Sim card inside and the problem isn't with my Sim card since I tried in my old phone and it works. Even other Rogers Sim card don't work. Anyway I tried taking the battery out and after 3 attempt its working again. So, I want to know anyone else having the same problem and what's the solution?
Sent from my X10a

I had the same issue but mine was a little different. My Xperia would not accept my rogers Sim ( 3 years old ) but it worked fine in all my other handsets.. it was the Sim card in my case and I was surprised to have it replaced free of charge.. also I found that some of the Sims are thinner than others so they would not have enough pressure to make a good contact. A quick fix from my friends Nokia was some clear tape on the back of his sim and it worked perfect.
Good luck!
htc fan89 said:
Hello guys
I'm having an issue when my x10 says there's no Sim card inside and the problem isn't with my Sim card since I tried in my old phone and it works. Even other Rogers Sim card don't work. Anyway I tried taking the battery out and after 3 attempt its working again. So, I want to know anyone else having the same problem and what's the solution?
Sent from my X10a
Click to expand...
Click to collapse

TMobile's customer service department told me to bend the sim card very gently to ensure good contacts are made. Did this on first day and not had any problems since (famous last words... I'll be digging out the tape by tomorrow!)

My Sim card is like 5 year old anyway It's working now
Sent from my X10a

All u guys with 5yr old simcards need to get rid of them! Those have like 28kb of storage on them, so their phone books are so, so limited!
I know! U use the phones memory, which is a whooooooole bunch! But if your phone ever crashed, all your contacts will be gone! U cannot always copy the entire list of contacts to the sim card, but with a newer 3G simcard, you can copy a lot more than your 5yr old sim card can hold.
These are free! Just walk into your provider's store and request a new simcard. U dont even have to show them what kind of phone u have (ahem!... those of us who are skimming with grandfathered data plans ). Just walk in and say "left my phone at work, but I need a simcard".

I think this thread will help you
as it does for me
http://forum.xda-developers.com/showthread.php?t=743818

I checked that thread, but I hadn't rooted my x10a yet. Going waiting until something extraordinary happens
Someday I will change my sim card lol

ZUK Z1 not working with AT&T or 3 UK

bought a replacement for my beloved ZUK Z1 because i had the infamous battery permenantly at 50% problem and the new one wont recognize any sim cards properly, i either get "error while searching for networks" or if it manages to find AT&T (it has a little sim card logo next to it when it does) it always says "cant connect to this network at the moment try again later" i get similar if not less fruitful results with my 3 sim card, it was sold as unlocked and it was unopened new when it arrived but i just cant get it to work
also the APN settings are all correct, ive done a factory restore twice, board tested it and re inserted the sim cards many times

ebobde said:
bought a replacement for my beloved ZUK Z1 because i had the infamous battery permenantly at 50% problem and the new one wont recognize any sim cards properly, i either get "error while searching for networks" or if it manages to find AT&T (it has a little sim card logo next to it when it does) it always says "cant connect to this network at the moment try again later" i get similar if not less fruitful results with my 3 sim card, it was sold as unlocked and it was unopened new when it arrived but i just cant get it to work
also the APN settings are all correct, ive done a factory restore twice, board tested it and re inserted the sim cards many times
Click to expand...
Click to collapse
Did you use any other ROMs? Try it since many ROMs have network problem. Try using ZUi.