So at one point, I accidentally deleted the OS off of my phone, but I still had TWRP installed. The only solution was to flash a rom through ADB, but TWRP didn't have ADB for whatever reason for me, so I flashed CWM which did have ADB. I was able to flash CWM after I pushed a rom through ADB and install Android 4.3 w/ root from nexus4root.com. It worked correctly, but I noticed that I only had 5.66gb of storage on my phone. I have the 16gb variant which would have about 12gb usable. So I followed a guide here in xda to get back my 16gb. I was told to wipe my phone step by step and flash a factory image. But ere are my errors not
- When I try to flash the factory image, it says 'missing boot.sig, system.sig, and something else.sig'
- I have no recovery on my phone
- When I try using fastboot commands, it says FAILED (command write failed (unknown error))
I am pretty stuck here. And I did redownload the root files.
EDIT: I was able to fix fastboot and flashed TWRP, but my devices is encrypted and requires a password
You should be able to clean your encrypted user storage by using "fastboot erase userdata", and you can do it for /data /system and /cache partition as well.
Or go into TWRP, if it ask for password, just press cancel. Then go to Wipe -> Advance -> Select "Format Data" and it will do a full wipe and cleaning out the encrypted partition.
As for using fastboot to restore to stock, shouldn't be any problem as long as you have the correct drivers and latest ADT package from Google.
I did something similar and had encryption on. My fix was "fastboot flash" the stock system, boot and recovery (4.3 for me). After getting back in my phone and verifying everything was there I re-flash CWM and re-rooted.
I wanted to flash a ROM, so I wiped system etc, then flashed a TWRP img and after I reboot to TWRP it asks me to enter a encrpytion password , but I haven't set any!!! please help
The password is your PIN/password on Android.
If you have a pattern, you can switch to a PIN or password to decrypt the storage on TWRP, or you can type the password in this order:
-1 2 3-
-4 5 6-
-7 8 9-
For example, if my pattern is a "L", I would type on TWRP: 14789
EvilHowl said:
The password is your PIN/password on Android.
If you have a pattern, you can switch to a PIN or password to decrypt the storage on TWRP, or you can type the password in this order:
-1 2 3-
-4 5 6-
-7 8 9-
For example, if my pattern is a "L", I would type on TWRP: 14789
Click to expand...
Click to collapse
I tried this without success but thanks for the help.
I fixed it by flashing fulmics ROM. I got some errors while flashing but it booted and my files are still there
Hi, i have the same problem, i've just unlocked bootloader, (forgot to remove screen lock pin+imprint), installed TWRP. and keeps ask about password. The partition is encrypted in recovery.
I've tried to erase userdata from fastboot, wipe data and format data from twrp.
Any help how can i get rid of the encryption?
Should i lock and unlock the bootloader again?
After i've unlocked the bootloader i didn't boot normally in android and wanted to install twrp.
i come from Nexus devices and it's way more easier there!
erasing partition from fastboot make it have no filesystem or whatsoever and twrp sees that as encrypted filesystem . just press cancel or skip button at twrp encryption screen and it should show up twrp main menu. from there format data partition with ext4 and reboot. at least that's how I solved the problem. I highly recommend doing backup of your data first like photos , music etc. before messing with anything
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards, fires, rigged elections, ligma,
* thermonuclear war, or your mom getting upset with you for being on the computer all day
Please
* Ensure you have an advanced understanding of this device before flashing it! YOU are choosing to make these modifications or your own free will.
*/
THIS GUIDE APPLIES TO JETER AND ALJETER DEVICES
FOR ALJETER DEVICE OWNERS ONLY.
there are ALOT of different variants of the aljeter so please before beginning this root method go to settings, system, about phone. look for either sw version or software channel verison and either remember what it says or write it down. me or anyone else will need this to help troubleshoot which aljeter variant you have. this will also be important to know incase you mess up and need to reflash stock firmware which those instructions are at the bottom of this guide.
The following devices have been confirmed to work on devices with Android 8 (Oreo)
XT1922-4 Model
XT1922-5 Brazilian Model
XT1922-7 Boost Mobile/ Virgin Mobile
XT1922-9 Motorola Retail
The following devices have been confirmed to work with Android 9 (pie)
XT1922-7 (Jeter) boost Mobile/ Virgin Mobile.
XT1922-3 (Aljeter)
XT1922-5 (Aljeter retbr)
Please make backups using TWRP IN CASE OF FAILURE.
Original stock firmware FOR JETER can be found here. https://mirrors.lolinet.com/firmware/moto/jeter/official/ and here FOR ALJETER https://mirrors.lolinet.com/firmware/moto/aljeter/official/
The steps listed in this process WILL wipe your userdata. If you have anything you need to save back it up first.
Prerequisite:
Unlocked bootloader.
FOR LINUX USERS. If you're using a linux distro then congrats this is all you should have to run. open command prompt and run this. "sudo apt-get install adb" without quotation marks. then follow Motorolas bootloader guide in provided link. continue to step 1 after.
FOR WINDOWS USERS.
ADB/Fastboot installed on your machine ( https://developer.android.com/studio...platform-tools ) If you have issues with commands make sure you have a current build of ADB and fastboot.
Minimal adb/fastboot v1.4.3 installer can be found here. https://androidfilehost.com/?fid=746010030569952951
Motorola bootloader unlock request here https://motorola-global-portal.custh...-your-device-a
DECRYPTION AND BACKUP.
NOTICE
IF YOU YOU ARE USING THE 32GB MODEL OR THE 16GB MODEL AND ARE ON ANDROID 9 (PIE) PLEASE USE THE ANDROID 9 (PIE) MODEL TWRP. USERS WITH THE 16GB MODEL AND THE 32GB MODEL ON ANDROID 8 (OREO) WILL STILL NEED TO USE SEPERATE TWRPS
MAKE SURE TO SWIPE RIGHT IN TWRP TO ALLOW SYSTEM MODIFICATIONS.
Step 1.) Download and extract twrp image to the ADB/Fastboot folder on your computer.
FOR ANDROID 8 (OREO)
16gb model twrp: https://www.androidfilehost.com/?fid=6006931924117921836
32gb model twrp: https://www.androidfilehost.com/?fid=6006931924117927211
FOR ANDROID 9 (PIE)
https://www.androidfilehost.com/?fid=6006931924117921849
Step 2.) Reboot to your bootloader. You can do this by turning on your device and holding the power button and volume down button at the same time.
Step 3.) Once the device reboots to the bootloader type the following from your computer with your phone connected via USB.
Code:
fastboot boot twrp.img
Step 4.) Once TWRP boots from your computer type (it may take a bit to boot because it is trying to decrypt your userdata, but it will fail and prompt for a password. Just click cancel)
Step 5.) time to backup your stock recovery and stock boot. use these commands one at a time.
Code:
adb pull /dev/block/platform/soc/7824900.sdhci/by-name/boot stockboot.img
adb pull /dev/block/platform/soc/7824900.sdhci/by-name/recovery stockrecovery.img
This will backup your stock boot and recovery images if you need to revert to stock later.
Step 6.) time to decrypt which will also format your data so make sure to make a backup. while still booted in twrp touch the "wipe" button then touch "format data", type yes and after its all done reboot to bootloader use this command.
Code:
adb reboot bootloader
CONGRATS! if you read this correctly and or didnt skim then you have successfully decrypted your device and backed up your stock recovery and stock boot.img. proceed below for root process.
ROOT PROCESS.
Step 1.) Run the following command from your computer to install the TWRP image to your device.
Code:
fastboot flash recovery twrp.img
Step 2.) Use the volume keys on the device to select boot to recovery and TWRP will boot up again. swipe right to allow modifications. IT SHOULD NOT ASK YOU FOR A PASSWORD THIS TIME IF IT DOES YOU MESSED UP DURING THE DECRYPT PROCESS
Step 3.) Follow this link to the creators site to download the disabler zip. https://zackptg5.com/android.php#disverfe download it to your ADB/Fastboot folder.
Step 4.) Download the Magisk Beta v20.0 and or the latest zip file from https://github.com/topjohnwu/Magisk/releases to your ADB/Fastboot folder. (I personally use beta so I use beta in this guide but you don't have to)
Step 5.) Run the following command to push the dm_verity force encrypt disabler and magisk zip to your device
Code:
adb push Disable_Dm-Verity_ForceEncrypt_11.02.2020.zip /tmp
adb push Magisk-v20.0.zip /tmp
This will push the Disable_Dm-Verity_ForceEncrypt_11.02.2020.zip and Magisk-v20.0.zip to your /tmp folder
Step 6.) Flash Disable_Dm-Verity_ForceEncrypt_11.02.2020.zip from TWRP using the install option and navigate to the /tmp folder to select it and install it.
Step 7.) Flash Magisk-v20.0.zip from TWRP using the install option and navigate to the /tmp folder to select it and install it.
Step 8.) Reboot your device
Step 9.) Just wait for the device to boot up. might take a bit and it might seem its in a bootloop but if you followed this guide exactly as is just wait it out it took about 5-10 minutes before i got to the "lets get started" screen after updating to pie (android 9)
Step 10.) Verify Magisk Manager is installed and the root functionality works. sometimes the manager apk wont be installed so download the magisk manager apk from the provide links. click advanced to see if the boxes are unchecked. (2022 edit) If you see magisk app and magisk needs updated you can do it but I can't confirm if it's safe and what works and doesnt after
CONGRATS! IF YOU DIDNT SKIM MY GUIDE YOU SHOULD HAVE A SUCCESSFULLY ROOTED AND ENCRYPTION DISABLED DEVICE, HAVE FUN.
IF YOU MESSED UP, DIDNT PUT A COMMAND IN CORRECTLY, SKIMMED, OR ARE INA GENUINE BOOTLOOP/BRICK THIS SECTION IS FOR YOU
Step 1.) DOWNLOAD STOCK FIRMWARE HERE FOR JETER AND CERTAIN ALJETER DEVICES (from what i can tell usa variant aljeter devices are consided jeter) https://mirrors.lolinet.com/firmware/moto/jeter/official/ IF YOU REMEMBER OR WROTE DOWN YOUR SW CHANNEL VERSION THEN DOWNLOAD STOCK FIRMWARE FOR BASICALLY EVERY OTHER ALJETER DEVICE HERE. https://mirrors.lolinet.com/firmware/moto/aljeter/official/ UNZIP STOCK FIRMWARE TO YOUR ADB/FASTBOOT FOLDER TO FLASH IT. TO REVERT BACK TO STOCK YOU HAVE TO REFLASH STOCK FIRMWARE FROM THE BOOTLOADER if your device is bootlooped or bricked or not working right you have to reflash the stock firmware your device came with. PLEASE INPUT THESE COMMANDS ONE AT A TIME DO NOT DO THEM ALL AT ONCE. I KNOW ITS A HASSLE BUT IT GUARANTEES A SUCCESSFUL REFLASH. I CANNOT EMPHASIZE THIS ENOUGH
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastbot flash recovery recovery.img
fastboot flash dsp adspso.bin
fastboot flash boot boot.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash oem oem.img
fastboot flash vendor vendor.img
fastboot erase userdata
fastboot erase DDR
fastboot erase modemst1
fastboot erase modemst2
fastboot flash logo logo.bin
fastboot oem fb_mode_clear
fastboot reboot
Credits: @kwiksi1ver for making the original guide. @topjohnwu for magisk. @shimp208 for minimal adb/fastboot. @Spaceminer for providing the new twrps for 16gb and 32 gb devices, and @Zackptg5 for making the Universal DM-Verity, ForceEncrypt, Disk Quota Disablers.
QUICK NOTE/EDIT: SINCE I DO NOT OWN THIS DEVICE ANYMORE I CANNOT CONFIRM IT BUT YOU SHOULD BE ABLE TO UPDATE TO THE LATEST MAGISK 24.3 FROM THE MAGISK APP AFTER YOU INSTALL V20, AGAIN I AM NOT ABLE CONFIRM IF IT WORKS, CAUSES BOOTLOOPS, OR ANYTHING SO KEEP THAT IN MIND, but hopefully it does work for yall I've also updated the ADB commands for the disabler to reflect its latest version and I've updated the magisk link to topjohnwus GitHub as that's where all updates happen/ go first
RESERVED
In order to update the confirmed working models for this guide, if anyone that has this device with a unlocked bootloader and does root and decrypt successfully using my guide and it's not on the confirmed device list. PLEASE JUST PM ME and let me know. Please include device model number, name, and if on aljeter your software channel version.( For example. Xt1922-5 aljeter, sw channel: retbr)
following the instructions exactly gets me into a really weird bootloop where my phone boots twrp, shows some log and then reboots and does the same thing over and over
blowingoff said:
following the instructions exactly gets me into a really weird bootloop where my phone boots twrp, shows some log and then reboots and does the same thing over and over
Click to expand...
Click to collapse
I have the same issue. I used the recovery steps to go back to stock but every time i re-attempt to root/install twrp the bootloop comes back:
Also, it's failing to mount /data after Resurrection Remix wouldn't boot and it keeps giving me the unable to mount /data (invalid argument) problem. I need help badly. Can you help? Is it the TWRP's fault?
Kuntitled said:
I have the same issue. I used the recovery steps to go back to stock but every time i re-attempt to root/install twrp the bootloop comes back:
Also, it's failing to mount /data after Resurrection Remix wouldn't boot and it keeps giving me the unable to mount /data (invalid argument) problem. I need help badly. Can you help? Is it the TWRP's fault?
Click to expand...
Click to collapse
Are you encrypted? Because twrp will do that if you are. You have to use the wipe > format > type "yes" to continue method to remove encryption. Then reboot from twrp, directly back into twrp. Then it can mount /data properly, at which point you need to flash the encryption disabler. If you don't disable encryption you'll keep running into the same problem. You only have to do that once. After that you can use the regular wipe option. If you ever flash the stock vendor.img you'll need to do it again.
Also, please make sure twrp has been flashed to recovery. I don't think it'll work if you just boot through fastboot. If you followed all these instructions and magisk still refuses to install, or gives you a bootloop, then it's a ROM problem and not TWRP. Should that happen, let me know and I'll flash Resurrection remix and see if I can figure out what's going on. I've had ROMs refuse to be rooted before. Descendant ROM had this problem on some older builds.
Spaceminer said:
Are you encrypted? Because twrp will do that if you are. You have to use the wipe > format > type "yes" to continue method to remove encryption. Then reboot from twrp, directly back into twrp. Then it can mount /data properly, at which point you need to flash the encryption disabler. If you don't disable encryption you'll keep running into the same problem. You only have to do that once. After that you can use the regular wipe option. If you ever flash the stock vendor.img you'll need to do it again.
Also, please make sure twrp has been flashed to recovery. I don't think it'll work if you just boot through fastboot. If you followed all these instructions and magisk still refuses to install, or gives you a bootloop, then it's a ROM problem and not TWRP. Should that happen, let me know and I'll flash Resurrection remix and see if I can figure out what's going on. I've had ROMs refuse to be rooted before. Descendant ROM had this problem on some older builds.
Click to expand...
Click to collapse
as for me: I followed the instructions which tell us to only boot twrp during the data format and only then actually flash twrp.
but my problem is no magisk, as I always root my phone whenever i revert back to stock. it's just that decryption is not working on my xt1922-5
blowingoff said:
as for me: I followed the instructions which tell us to only boot twrp during the data format and only then actually flash twrp.
but my problem is no magisk, as I always root my phone whenever i revert back to stock. it's just that decryption is not working on my xt1922-5
Click to expand...
Click to collapse
Do it like this.
1. fastboot flash recovery twrp.img
2. Use the volume keys while still in fastboot to select "recovery" then hit the power button.
3. Hit cancel at the decryption screen when twrp boots up.
4. In TWRP select wipe > format > type "yes" to continue. Do not reboot the phone yet.
5. In twrp select reboot > recovery.
6. Once twrp boots up again, select mount and check the boxes for /data, /system, /vendor, /cache.
7. Now flash the universal encryption disabler.
8. Let it boot once, then go back into recovery and flash Magisk.
This should solve your problem.
Spaceminer said:
Do it like this.
1. fastboot flash recovery twrp.img
2. Use the volume keys while still in fastboot to select "recovery" then hit the power button.
3. Hit cancel at the decryption screen when twrp boots up.
4. In TWRP select wipe > format > type "yes"no to continue. Do not reboot the phone yet.
5. In twrp select reboot > recovery.
6. Once twrp boots up again, select mount and check the boxes for /data, /system, /vendor, /cache.
7. Now flash the universal encryption disabler.
8. Let it boot once, then go back into recovery and flash Magisk.
This should solve your problem.
Click to expand...
Click to collapse
My issue is as follows:
I had rooted my g6play months ago, back when pie came out on Ota for it. The guide I followed didn't have me disable encryption, which at the time wasn't a real big deal, with my only loss being the inability to do nandroid backups. But fast forward to now, when Resurrection Remix GSI came out, I was immediately interested as I think that rom could be a great experience.
So I decided to come here in this guide because I might as well disable encryption, right? So I flashed the new twrp and did get it to wipe and disable the encryption (in the option that has you type in yes) and proceeded to flash RR, it booted to the boot anima9and there it stayed for a good 30 minutes before I decided to try the older GSI image, maybe that one would work.
But nope, I immediately got the unable to mount /data bootloop and successfully flashed my stock rom and tried again, this time flashing the new twrp right off the bat. No avail. Now everytime i go into a freshly flashed twrp, i get no password prompt, and when i try to access the internal storage, it comes up as 0mb. Even my Linux complains that it couldn't mount my Internal storage as only the SD card shows up (weirdly enough I was able to successfully push dm verity and magisk to /temp no problem but they fail upon flashing)
Edit: gotta mention that after the first time I did the pull adb command to get the backups, the command refuses to work anymore. And also that I still have an old twrp backup stored (did that today before trying this)
Kuntitled said:
My issue is as follows:
I had rooted my g6play months ago, back when pie came out on Ota for it. The guide I followed didn't have me disable encryption, which at the time wasn't a real big deal, with my only loss being the inability to do nandroid backups. But fast forward to now, when Resurrection Remix GSI came out, I was immediately interested as I think that rom could be a great experience.
So I decided to come here in this guide because I might as well disable encryption, right? So I flashed the new twrp and did get it to wipe and disable the encryption (in the option that has you type in yes) and proceeded to flash RR, it booted to the boot anima9and there it stayed for a good 30 minutes before I decided to try the older GSI image, maybe that one would work.
But nope, I immediately got the unable to mount /data bootloop and successfully flashed my stock rom and tried again, this time flashing the new twrp right off the bat. No avail. Now everytime i go into a freshly flashed twrp, i get no password prompt, and when i try to access the internal storage, it comes up as 0mb. Even my Linux complains that it couldn't mount my Internal storage as only the SD card shows up (weirdly enough I was able to successfully push dm verity and magisk to /temp no problem but they fail upon flashing)
Edit: gotta mention that after the first time I did the pull adb command to get the backups, the command refuses to work anymore. And also that I still have an old twrp backup stored (did that today before trying this)
Click to expand...
Click to collapse
well i also couldnt make the backups, fastboot just tells me the file doesnt exist. and for the internal storage: while you are encrypted, that is how it works.
---------- Post added at 11:58 AM ---------- Previous post was at 11:42 AM ----------
blowingoff said:
well i also couldnt make the backups, fastboot just tells me the file doesnt exist. and for the internal storage: while you are encrypted, that is how it works.
Click to expand...
Click to collapse
Edit: i can not mount data, twrp says argument invalid. followed your instructions anyway and my phone still gets me to a bootloop to a "running OpenRecoveryScript" again.
blowingoff said:
well i also couldnt make the backups, fastboot just tells me the file doesnt exist. and for the internal storage: while you are encrypted, that is how it works.
---------- Post added at 11:58 AM ---------- Previous post was at 11:42 AM ----------
Edit: i can not mount data, twrp says argument invalid. followed your instructions anyway and my phone still gets me to a bootloop to a "running OpenRecoveryScript" again.
Click to expand...
Click to collapse
Go into the wipe menu, advanced wipe, check data and hit change file system. change data back to f2fs. When you guys format and don't immediately reboot straight to recovery, data sets to Auto and freaks out
Starkiller2 said:
Go into the wipe menu, advanced wipe, check data and hit change file system. change data back to f2fs. When you guys format and don't immediately reboot straight to recovery, data sets to Auto and freaks out
Click to expand...
Click to collapse
the multiple times i checked, the file system was always f2fs, but sometimes ext4
and also: Do you mean we should do that after we try to format with the format data (typing yes) option? If so, it doesn't work as the internal storage won't mount. Won't even show up on my computer
Kuntitled said:
the multiple times i checked, the file system was always f2fs, but sometimes ext4
and also: Do you mean we should do that after we try to format with the format data (typing yes) option? If so, it doesn't work as the internal storage won't mount. Won't even show up on my computer
Click to expand...
Click to collapse
If you change the file system, it'll format, even if it says it won't mount. Changing the file system will force it to format. Even if it says f2fs, hit change and select f2fs anyway.
If it doesn't, format from fastboot, boot system once then go to recovery
Starkiller2 said:
If you change the file system, it'll format, even if it says it won't mount. Changing the file system will force it to format. Even if it says f2fs, hit change and select f2fs anyway.
If it doesn't, format from fastboot, boot system once then go to recovery
Click to expand...
Click to collapse
Alright, let me work through this.
I'm currently on a stock firmware and it's working fine.
Right now i have to:
1. boot into recovery twrp
2. change the filesystem of data
3. flash recovery and boot into it
4. format data(yes option)
5.check and change the file system again
6.reboot straight back into twrp recovery from recovery
7.flash dm verity zip
8.flash magisk
9.boot
Is this correct? and as for attempting to install a GSI image again, should i attempt to flash it before the verity zip and magisk? (i'll also be flashing micro gapps) or do i let it boot into system once and then i do it? (by wiping data/dalvik/cache/system)
Kuntitled said:
Alright, let me work through this.
I'm currently on a stock firmware and it's working fine.
Right now i have to:
1. boot into recovery twrp
2. change the filesystem of data
3. flash recovery and boot into it
4. format data(yes option)
5.check and change the file system again
6.reboot straight back into twrp recovery from recovery
7.flash dm verity zip
8.flash magisk
9.boot
Is this correct? and as for attempting to install a GSI image again, should i attempt to flash it before the verity zip and magisk? (i'll also be flashing micro gapps) or do i let it boot into system once and then i do it? (by wiping data/dalvik/cache/system)
Click to expand...
Click to collapse
Let's simplify. If everything is working,
go to fastboot
Flash recovery (boot doesn't seem to be working here)
Fastboot flash recovery twrp image
Select recovery, when the decrypt menu comes up, hit cancel
Wipe menu,
Swipe to factory reset
Go back to wipe
format data, yes,
Reboot recovery
Flash disabler
Flash magisk
And yes. Boot system then GSI flash, then factory reset before magisk
---------- Post added at 01:44 PM ---------- Previous post was at 01:36 PM ----------
We'll get it figured out
Starkiller2 said:
Let's simplify. If everything is working,
go to fastboot
Flash recovery (boot doesn't seem to be working here)
Fastboot flash recovery twrp image
Select recovery, when the decrypt menu comes up, hit cancel
Wipe menu,
Swipe to factory reset
Go back to wipe
format data, yes,
Reboot recovery
Flash disabler
Flash magisk
And yes. Boot system then GSI flash, then factory reset before magisk
---------- Post added at 01:44 PM ---------- Previous post was at 01:36 PM ----------
We'll get it figured out
Click to expand...
Click to collapse
Do i check the file system for data at any point?
Kuntitled said:
Do i check the file system for data at any point?
Click to expand...
Click to collapse
Only if it won't mount
Starkiller2 said:
Only if it won't mount
Click to expand...
Click to collapse
does it matter where i flash disabler, magisk and GSI from? I've been doing it from my SD card
Kuntitled said:
does it matter where i flash disabler, magisk and GSI from? I've been doing it from my SD card
Click to expand...
Click to collapse
No that's fine
Starkiller2 said:
If you change the file system, it'll format, even if it says it won't mount. Changing the file system will force it to format. Even if it says f2fs, hit change and select f2fs anyway.
If it doesn't, format from fastboot, boot system once then go to recovery
Click to expand...
Click to collapse
Data is set to emmc file system, won't mount and filesystem won't change at all and won't format
Edit: only happens when i try to change it to f2fs, changed it to ext4 with no issues and it mounts sucessfully with ext4 but won't let me format data
I get the mkfs.f2fs -t 0 /dev/block/mmcblk0p56 error 1, unable to mount data whenever i try to change to f2fs. Has my previous failed attempt at installing GSI **** with my filesys?
Kuntitled said:
Data is set to emmc file system, won't mount and filesystem won't change at all and won't format
Edit: only happens when i try to change it to f2fs, changed it to ext4 with no issues
Click to expand...
Click to collapse
But data won't work as ext4, hence the boot loop
Try going to fastboot and typing
Fastboot -w
Then boot to recovery
---------- Post added at 02:10 PM ---------- Previous post was at 02:07 PM ----------
Kuntitled said:
Data is set to emmc file system, won't mount and filesystem won't change at all and won't format
Edit: only happens when i try to change it to f2fs, changed it to ext4 with no issues and it mounts sucessfully with ext4 but won't let me format data
I get the mkfs.f2fs -t 0 /dev/block/mmcblk0p56 error 1, unable to mount data whenever i try to change to f2fs. Has my previous failed attempt at installing GSI **** with my filesys?
Click to expand...
Click to collapse
I honestly don't see how, especially if stock is working
Hello, i am in dire need of help. I bought the new g7, flashed TWRP to recovery, installed Magisk Manager, and was happy for a bit. Long story short, a security update for my phone was released, pop ups saying "Update Failed" were getting annoying, so I naively decided it was a good idea to uninstall magisk, install the update, and reinstall magisk. Easy right? NOPE. I think Magisk messed up my partitions somehow. My phone is soft bricked, bootloops, endlessly. I can get into bootloader settings, (power + volume down), but nothing works. I can't boot into factory mode, i can't boot into TWRP. The phone shows up in fastboot, but I can't flash TWRP to recovery, it says "recovery partition not found". I am very lost, and my pictures of my Europe vacation are stuck on there. Are there any options for restoring my phone, or at least salvaging my files? Thanks in advance..
Hi There.
Maybe you can try this in order to boot into TWRP:
Code:
fastboot boot twrp-xxx.img
FoxShadow said:
Hi There.
Maybe you can try this in order to boot into TWRP:
Code:
fastboot boot twrp-xxx.img
Click to expand...
Click to collapse
Thank you for your time. I pushed TWRP to my phone, it booted fine, but I can't find my backups. My sdcard directory is filled with random folders with gibberish names, I don't know if it's encrypted or what. I had a TWRP backup in my internal storage, but as i said i can't find it. I thought maybe if i reinstalled Magisk, the bootloop would stop and i wouldn't lose information. I downloaded the .zip file to my PC, but ADB won't push to internal storage.
Terminal input (while phone is in TWRP): >adb push C:\Users\[me]\Downloads\Magisk-v19.3.zip
Output: --adb: usage: push requires an argument.
Any ideas on how to get my system back without losing my files?
gunnergilson said:
Thank you for your time. I pushed TWRP to my phone, it booted fine, but I can't find my backups. My sdcard directory is filled with random folders with gibberish names, I don't know if it's encrypted or what. I had a TWRP backup in my internal storage, but as i said i can't find it. I thought maybe if i reinstalled Magisk, the bootloop would stop and i wouldn't lose information. I downloaded the .zip file to my PC, but ADB won't push to internal storage.
Terminal input (while phone is in TWRP): >adb push C:\Users\[me]\Downloads\Magisk-v19.3.zip
Output: --adb: usage: push requires an argument.
Any ideas on how to get my system back without losing my files?
Click to expand...
Click to collapse
Dont worry. We can fix this.
No. The adb command is wrong.
Code:
adb push C:\Users\[me]\Downloads\Magisk-v19.3.zip /data/
/data is the folder in the phone where you would like to copy the Magisk file
I will make it easy for you.
Step 1. Download MagiskUninstaller from
https://github.com/topjohnwu/Magisk/releases/download/v19.3/Magisk-uninstaller-20190604.zip and save it in PC and Open a terminal/cmd in the download folder
Step 2. Boot into TWRP using
Code:
fastboot boot twrp-xxx.img
Step 3. Go to Advanced
Step 4. Press AdbSideload
Step 5. in the terminal/cmd opened in the step 1 enter
Code:
adb sideload MagiskUninstallerxxx.zip
Step 6. It will began to flash the uninstaller and Hopefully your phone will be saved.:good:
Thank you for the input, however this didn't work.
I tried sideloading the uninstaller. Here's the log:
-current boot slot: _b
-Mounting system
-Mounting vendor
-Device is system-as-root
-Device platform: arm64
!Cannot access /data, please uninstall with magisk manager
-Unmounting partitions
Updater process ended with ERROR: 1
Any other ideas? I can put files on my micro sd card, and TWRP can see that. I did that to flash the uninstaller the second time, when sideload didn't work. No luck still. I also tried installing Magisk.zip again, but still there is a bootloop. I had a full system backup made by TWRP, in my internal storage. If I could flash that, maybe it would fix the problem, but I can't seem to even find internal storage. Thanks for all the help, and I hope we can figure this out.
gunnergilson said:
Thank you for the input, however this didn't work.
I tried sideloading the uninstaller. Here's the log:
-current boot slot: _b
-Mounting system
-Mounting vendor
-Device is system-as-root
-Device platform: arm64
!Cannot access /data, please uninstall with magisk manager
-Unmounting partitions
Updater process ended with ERROR: 1
Any other ideas? I can put files on my micro sd card, and TWRP can see that. I did that to flash the uninstaller the second time, when sideload didn't work. No luck still. I also tried installing Magisk.zip again, but still there is a bootloop. I had a full system backup made by TWRP, in my internal storage. If I could flash that, maybe it would fix the problem, but I can't seem to even find internal storage. Thanks for all the help, and I hope we can figure this out.
Click to expand...
Click to collapse
You cannot find your data or you can only find gibberish filenames is because you are booting from the TWRP image. try to flash TWRP and then reboot to recovery. Then you could see the files that weren't accessible earlier.
Reference Link : https://forum.xda-developers.com/moto-g7/how-to/moto-g7-twrp-root-t3914112