Related
First and all, DO THIS AT YOUR OWN RISK!*Credits goes to the devs of 4pda.ru for discovering this method and to Pedro Fortunato for sharing the link.
REQUIREMENTS, PREREQUISITES
Computer, Laptop will do.Asus Zenfone Go Unit - obviously
Adb drivers -*https://mega.nz/#!2scCERxC!gbNd6tJcrUAkn4nv7kU2DBsnSEv8G6-GfZVVl9g97fI download this.
ADB, Root file, Twrp - https://mega.nz/#!HtN03SCa!WxQJ3a33C0XkuE20qv0rYwvxcYrGxZtMk-4jQeL1ykU
Methods
1. PREPARE THE FILES ON YOUR COMPUTER AND PHONE
a. On your computer, Install ADB drivers and extract the files on the given link. To Install the driver, extract the one given from the link and right click on android_winusb.inf and select install. Another way to install it is to download from adbdriver.com and download th ADB Driver Installer.b. On your device enable developer option by tapping build number on about phone.c. Go to Developer options - turn on Allow OEM Unlocking and Usb Debugging.2. UNLOCK YOUR BOOTLOADER
a. Turn off your devices.b. Press Volume up + power simultaneously to go to the bootloaderc. Use volume up to navigate and navigate to fastboot, select by pressing volume downd. On your computer, go to the extracted file (the one i provided from mega.nz) and press shift + right click, the select open command window here.e. Once on the command prompt typefastboot devicesf. if your device appeared (denoted by serial number and device) typefastboot oem unlockg. on your device, follow the on screen instruction, press volume up to agree on unlocking bootloaderNOTE THIS WILL FORMAT YOUR DEVICE SO MAKE SURE YOU ENSURE YOU BACKED UP
h. Wait for it to return to fastboot mode.*Reboot. If you cant reboot it, reinsert battery and turn it on, it will now format your device. It will usually take time to boot so be patient.i. Once booted go back to developer options again and enable oem unlock and usb debugging.3. FLASHING TWRP RECOVERY
Done with unlocking? Lets proceed to flashing TWRP RECOVERY.[WARNING AGAIN: DO THIS AT YOUR OWN RISK. DOUBLE CHECK THE FILES, DOUBLE CHECK THE*COMMANDS THAT YOU TYPE]
a. On your pc, again go to the extracted file, open the command prompt as instructed before and type this adb reboot bootloaderb. Your phone will restart to bootloader again, select fastboot again. Dont close the cmd.c. On the command prompt typefastboot flash recovery recovery.imgd. It will now flash the twrp. Ensure that the recovery is flashed correctly.e. Reboot to recovery by holding volume up + down + power to shut it down without removing rom pc and by pressing vol up and power to boot to bootloader and selecting recovery.f. IF YOU ARE NOW ON THE TWRP. CONGRATS. You have only one thing to do. Flash the root package.4. FLASHING THE ROOT PACKAGE
a. Boot your phone and copy the root package to your internal storage.b.Reboot to TWRP Recovery, once there select install and browse for UPDATE-SuperSU-v2.46.zip you just copied, swipe to install. Then viola! YOUR PHONE IS NOW ROOTED.
AGAIN, I WILL NOT BE HELD LIABLE IF YOUR PHONE DIED, EXPLODED, ATE YOU OR COMMITTED SUICIDE. AGAIN AGAIN. ALL CREDITS GOES TO THE DEVS OF 4pda.ru especially Jemmini for the TWRP Recovery
Yea please there's more people looking for it here at xda
me too I have the same problem! any solution? please help and happy new year!
yes please
Yeah im waiting too , please where people that knowledge about root please makes for asus zenfone go
How root asuse zenfone go?
I think we should root this phone like rooting other mtk devices
sorry for my bad english
keityrobins said:
Hello. I would like to ask for help about our phone. As of now there are no working rooting method available and we cannot move apps to sd since asus disabled that option, our internal storage is therefore limiting us to install more apps. Anyone knows how to root it would be of great help.
Asus Zenfone Go has MT680 chipset running android 5.1.
Click to expand...
Click to collapse
Hello! There was a fully working right way to get Root! The forum 4pda found a solution to this problem :good:
it seems the Russians have done it
http://4pda.ru/forum/index.php?showtopic=698725&view=findpost&p=45947797
would anyone like to try?
please post feedback here!
burovik26 said:
Hello! There was a fully working right way to get Root! The forum 4pda found a solution to this problem :good:
Click to expand...
Click to collapse
will try
pedrofortunato said:
it seems the Russians have done it
http://4pda.ru/forum/index.php?showtopic=698725&view=findpost&p=45947797
would anyone like to try?
please post feedback here!
Click to expand...
Click to collapse
will try and feedback
THE TWRP WORKED. However the root package i had didn't installed the su binary and superuser cannot install it, will try more. Here is the link to the twrp - ftp://1 09.87.84.155/Asus_Zenfone_Go/Recovery/TWRP/2.8.7.0/recovery.img - remove the space between 1 and 0
guys it worked. rooted mine now.
keityrobins said:
guys it worked. rooted mine now.
Click to expand...
Click to collapse
could you make a step by step in english?
and does it erase all data on the phone?
pedrofortunato said:
could you make a step by step in english?
and does it erase all data on the phone?
Click to expand...
Click to collapse
Will do. Thanks for linking And yes on unlocking the bootloader part, it will erase your data.
where should i post the tutorial?
First and all, DO THIS AT YOUR OWN RISK!*Credits goes to the devs of 4pda.ru for discovering this method and to Pedro Fortunato for sharing the link.
REQUIREMENTS, PREREQUISITES
Computer, Laptop will do.Asus Zenfone Go Unit - obviously
Adb drivers -*https://mega.nz/#!2scCERxC!gbNd6tJcrUAkn4nv7kU2DBsnSEv8G6-GfZVVl9g97fI download this.
ADB, Root file, Twrp - https://mega.nz/#!HtN03SCa!WxQJ3a33C0XkuE20qv0rYwvxcYrGxZtMk-4jQeL1ykU
Methods
1. PREPARE THE FILES ON YOUR COMPUTER AND PHONE
a. On your computer, Install ADB drivers and extract the files on the given link. To Install the driver, extract the one given from the link and right click on android_winusb.inf and select install. Another way to install it is to download from adbdriver.com and download th ADB Driver Installer.b. On your device enable developer option by tapping build number on about phone.c. Go to Developer options - turn on Allow OEM Unlocking and Usb Debugging.2. UNLOCK YOUR BOOTLOADER
a. Turn off your devices.b. Press Volume up + power simultaneously to go to the bootloaderc. Use volume up to navigate and navigate to fastboot, select by pressing volume downd. On your computer, go to the extracted file (the one i provided from mega.nz) and press shift + right click, the select open command window here.e. Once on the command prompt typefastboot devicesf. if your device appeared (denoted by serial number and device) typefastboot oem unlockg. on your device, follow the on screen instruction, press volume up to agree on unlocking bootloaderNOTE THIS WILL FORMAT YOUR DEVICE SO MAKE SURE YOU ENSURE YOU BACKED UP
h. Wait for it to return to fastboot mode.*Reboot. If you cant reboot it, reinsert battery and turn it on, it will now format your device. It will usually take time to boot so be patient.i. Once booted go back to developer options again and enable oem unlock and usb debugging.3. FLASHING TWRP RECOVERY
Done with unlocking? Lets proceed to flashing TWRP RECOVERY.[WARNING AGAIN: DO THIS AT YOUR OWN RISK. DOUBLE CHECK THE FILES, DOUBLE CHECK THE*COMMANDS THAT YOU TYPE]
a. On your pc, again go to the extracted file, open the command prompt as instructed before and type this adb reboot bootloaderb. Your phone will restart to bootloader again, select fastboot again. Dont close the cmd.c. On the command prompt typefastboot flash recovery recovery.imgd. It will now flash the twrp. Ensure that the recovery is flashed correctly.e. Reboot to recovery by holding volume up + down + power to shut it down without removing rom pc and by pressing vol up and power to boot to bootloader and selecting recovery.f. IF YOU ARE NOW ON THE TWRP. CONGRATS. You have only one thing to do. Flash the root package.4. FLASHING THE ROOT PACKAGE
a. Boot your phone and copy the root package to your internal storage.b.Reboot to TWRP Recovery, once there select install and browse for UPDATE-SuperSU-v2.46.zip you just copied, swipe to install. Then viola! YOUR PHONE IS NOW ROOTED.
AGAIN, I WILL NOT BE HELD LIABLE IF YOUR PHONE DIED, EXPLODED, ATE YOU OR COMMITTED SUICIDE. AGAIN AGAIN. ALL CREDITS GOES TO THE DEVS OF 4pda.ru especially Jemmini for the TWRP Recovery
if the adb driver dont work -http://adbdriver.com/downloads
keityrobins said:
if the adb driver dont work -http://adbdriver.com/downloads
Click to expand...
Click to collapse
thank you so much! since there's more than 3 threads about the same thing I don't think it's a bad idea to create a new one for this tutorial
pedrofortunato said:
thank you so much! since there's more than 3 threads about the same thing I don't think it's a bad idea to create a new one for this tutorial
Click to expand...
Click to collapse
then lets create a new one, but first let me know if there are mistakes on the tutorial.
[Howto Video]
https://www.youtube.com/watch?v=LDdV2OMaXPI&feature=youtu.be
WORKS WITH HUAWEI MATE 8-L29.
Step One things you need:
DC-Unlucker Client
Device Driver (Install Huawei HiSuite or use Driver in the Package)
TWRP (recovery.img)
BETA-SuperSU-v2.67
ADB AND FASTBOOT
NXT-L29C900B162
Download the complete Package:
https://drive.google.com/open?id=0B0tMO0kNwZpvZ0phU3F2clZLVWc
Step two:
Copy the NXT_C900B162.zip and the BETA-SuperSU-v2.67.zip on your SD CARD!
Install your Drivers ( or Hisuite)
Install ADB & FASTBOOT!
After installing ADB move the file 'recovery.img' in the minimal adb fastboot folder.
Open the DC Unlucker.exe
Select "HUAWEI PHONES"
Take your phone and dial "*#*#2846579#*#*"
Select these:
'ProjectMenu',
'Background settings',
'USB ports settings',
'Manufacture mode'.
Connect your Phone
Let em search ur phone (magnifier)
BUY 4 Credits on this Site: (https://www.dc-unlocker.com/buy)
Back to the Unlocker client after you buyd the credits
Connect to server with the Username you choosed and the password from Mail.
If you are connectect click Unlocker
= choose the "Read Bootloader Code" to get the code you need to unlock the bootloader. NOTE THE CODE.
Boot the Mate 8 in bootloader mode
Turn off phone
Press Volume down
and insert USB CABLE.
Start Minimal ADB & FASTBOOT.
Check your Phone with "fastboot devices" if its there go on. IF NOT = CHECK DRIVERS!!
next command you need:
"fastboot oem unlock XXXXXXXXXXXX"
XXXX is your Bootloader Code.
/done. Start your Phone.
*Step Three Enable USB debugging on your device:
Open Settings on your device.
Go to About phone and tap seven times on Build number, this will enable Developer options.
Now go back to Settings and you’ll see “Developer options” there, open it.
Connect your Phone
Tick the USB Debugging checkbox.
Open minimsl adb fastboot again
Connect your device to the in Fastbootmode again and the command u need is:
fastboot devices is your phone there, go on!
fastboot flash recovery recovery.img
next command should be
fastboot reboot
YOU HAVE NOW TWRP
LAST AND IMPORTANT STEPS:
Start TWRP (Turn Phone off, press volume Up and Power button till your phone starts - release power button but still hold volume up)
now you click "Format Data" (ALL YOUR DATA WILL BE DELETE!!!)
Confirm with typing YES
Swipe to format data
go back click "INSTALL" select the SD CARD and then "NXT_C900B162.zip"
Swipe to install again.
DONT REBOOT! Go back!
Click "Install" again
SELECT "BETA-SuperSU-v2.67.zip"
Swipe again.
after installing SuperSu your phone is rooted and ready for a reboot.
If you want TWRP Recovery you have to flash Recovery again via Fastboot. (marked with a *)
question and answers faq
good job there, im sure this will be helpful for new users
After unlocking bootloader how to remove the new boot screen thas sayes your phone is not trusted?
rowihel2012 said:
After unlocking bootloader how to remove the new boot screen thas sayes your phone is not trusted?
Click to expand...
Click to collapse
Atm there is no Option for this. You can only press the PowerButton one time then he loads faster.
But i dont know a Option to remove this. Sorry
maybe future custom roms will include the removal of that screen, it is indeed somewhat annoying
jbmc83 said:
maybe future custom roms will include the removal of that screen, it is indeed somewhat annoying
Click to expand...
Click to collapse
That screen cant be removed its in the bootloader. The nexus 5x and 6p also have it.
I'll make that decrypted boot.img into a flashable TWRP zip file tonight so you can just flash it in TWRP instead of having to use Fastboot.
ajsmsg78 said:
I'll make that decrypted boot.img into a flashable TWRP zip file tonight so you can just flash it in TWRP instead of having to use Fastboot.
Click to expand...
Click to collapse
go back click "INSTALL" select the C00B129SP02 decrypted boot imgzip"
its already in a zip for TWRP. if you read the instruction i said try it with TWRP . But for me it dosnt worked - my way was the fastboot way
EGOiST1991 said:
go back click "INSTALL" select the C00B129SP02 decrypted boot imgzip"
its already in a zip for TWRP. if you read the instruction i said try it with TWRP . But for me it dosnt worked - my way was the fastboot way
Click to expand...
Click to collapse
I'll check it out tonight and try and get it working Thanks.
Thanx guys. Will try when I get my mate8...
BTW boot.img does not download for some reason...
try with a mobile browser
Sent from my Huawei Mate 8 NXT-AL10 using Tapatalk
icy20 said:
Thanx guys. Will try when I get my mate8...
BTW boot.img does not download for some reason...
Click to expand...
Click to collapse
Yeah, thats right you have to download with mobilephone (chrome works for me).
If someone can upload it anywhere?! That would be nice. I can send the boot.img for upload - googledrive for example - i dont have this ****
i dont understand why it only works via a mobile browser, hm.... especially since im using the share links provided on my laptop
ajsmsg78 said:
I'll make that decrypted boot.img into a flashable TWRP zip file tonight so you can just flash it in TWRP instead of having to use Fastboot.
Click to expand...
Click to collapse
I did not flash this boot why i should flash it ???
well if u didnt need it then dont worry about it
I unlocked the mate 8 bootloader with the old way like mate 7 and p8max
With facebook account
I know this guide was made for the L29 version so does anyone know if its OK to flash decrypted boot image on the AL10 model
jjerickson19 said:
I know this guide was made for the L29 version so does anyone know if its OK to flash decrypted boot image on the AL10 model
Click to expand...
Click to collapse
Yes jbmc83 flashed it on AL10.
Wait for his confirmation but im sure he have the same boot image likr me.
Gesendet von meinem HUAWEI NXT-L29 mit Tapatalk
What's that method plz
Sent from my HUAWEI NXT-AL10 using Tapatalk
Did not find any post mentioning rooting for 5C on EMUI. If there are any, let me know and I will take down this thread.
Note-
Applicable for Windows 7, Windows 8 and Windows 10
Similar steps are applicable for EMUI 4.X as well but TWRP file will change.
Saw many user on Honor 5C FB page and on XDA struggling to get root working on EMUI 5. most of the cases I saw, were for EMUI 5.X. I followed the steps mentioned or as applicable for any devices and I did not face any issue so though of compiling this guide for new users who may have faced issue or not able to root the phone. (may be mainly because of correct and working TWRP issue) . I will just simplify the steps so that any new users can do this without any problem and without any prior experience to rooting, it may be long but will be the simple enough for all the users.
Prerequisites-
Enable the developer option in settings-
Go to Settings--> About Phone-->Tab build number 7 times to enable this setting.
Go back in setting page, just above system update, you will see a new menu as -Developer Options
Scroll for the debugging section and enable the USB Debugging
You will be prompted for the confirmation with RSA key, just accept it.
Enable OEM Unlock in Developer Options (just above the USB debugging option) – Most probably this option will not be there on EMUI 5.0 (only few have seen on EMUI but it was there on EMUI 4.1 for all but rarely on EMUI 5.0 or may be because I have used dload most of the time which grayed out this)
Installation of required Drivers.
Connect your phone to PC and install Hi Suite on PC and it will additionally install all the necessary drivers to PC and HiSUite on Mobile.
Download and Install ADB from Link
Accept all the prompts and install ADB drive system wise.
Once installation is completed, if default options are chosen, it will be under C:\adb
Downloading the necessary files.
Download TWRP from Link Thanks to @OldDroid for his Original Thread . Rest of the contributor and credit in original thread by OldDroid.
Move the downloaded file under C:\adb or wherever you have installed the ADB.
Download the SuperSU file from this Link and put it in SD card or keep handy on PC so that you can copy to internal memory later.
Get the unlock as mentioned in this thread
Actual Procedure
Unlocking the bootloader-
Backup all your data as unlocking the bootloader will reset the device and all your data will be erased.
On windows machine, go to folder C:\adb or wherever you installed the adb drivers.
Press shift+right click together and select Open command prompt here
Run - adb reboot bootloader (this command may prompt for acceptance of RSA key if not already accepted)
This will boot the phone into bootloader mode.
Run - fastboot oem unlock <16 digit unlock code- Put your actual code you obtained from Huawei site > (This step will unlock the bootloader and will erase all your data)
Phone will restart automatically.
Installing TWRP
Once on the system, open the PowerShell or command prompt again in ADB folder (can use the previous instance as well)
Run - adb reboot bootloader
Once in bootloader, Run - fastboot flash recovery twrp-3.1.1-0-venus.img (This will install the TWRP recovery for EMUI 5.0 on your phone)
Once done with the flashing the TWRP, Run - fastboot reboot
Rooting
Once booted to system, open the PowerShell or command prompt in ADB folder (can use the previous instance as well)
Run - adb reboot recovery
And your phone will boot into the TWRP recovery.
Copy the SuperU file downloaded to SD card or Internal memory.
Install the SuperSU zip.
Reboot and enjoy.
Happy Flashing.
working twrp on NEM-L21 https://github.com/OpenKirin/android...0-2-hi6250.img
working supersu on NEM-L21 https://drive.google.com/file/d/0BxW...9ZRGxBTUE/view
Voutsjude said:
working twrp on NEM-L21 https://github.com/OpenKirin/android...0-2-hi6250.img
working supersu on NEM-L21 https://drive.google.com/file/d/0BxW...9ZRGxBTUE/view
Click to expand...
Click to collapse
Page not found for first and file not found for 2nd.
The links and the files mentioned in this thread will work on any honor 5C and are live files.
Nice and Thankssss
shashank1320 said:
did not find any post mentioning rooting for 5c on emui. If there are any, let me know and i will take down this thread.
note-
applicable for windows 7, windows 8 and windows 10
similar steps are applicable for emui 4.x as well but twrp file will change.
saw many user on honor 5c fb page and on xda struggling to get root working on emui 5. Most of the cases i saw, were for emui 5.x. I followed the steps mentioned or as applicable for any devices and i did not face any issue so though of compiling this guide for new users who may have faced issue or not able to root the phone. (may be mainly because of correct and working twrp issue) . I will just simplify the steps so that any new users can do this without any problem and without any prior experience to rooting, it may be long but will be the simple enough for all the users.
prerequisites-
enable the developer option in settings-
go to settings--> about phone-->tab build number 7 times to enable this setting.
go back in setting page, just above system update, you will see a new menu as -developer options
scroll for the debugging section and enable the usb debugging
you will be prompted for the confirmation with rsa key, just accept it.
enable oem unlock in developer options (just above the usb debugging option) – most probably this option will not be there on emui 5.0 (only few have seen on emui but it was there on emui 4.1 for all but rarely on emui 5.0 or may be because i have used dload most of the time which grayed out this)
installation of required drivers.
connect your phone to pc and install hi suite on pc and it will additionally install all the necessary drivers to pc and hisuite on mobile.
download and install adb from link
accept all the prompts and install adb drive system wise.
once installation is completed, if default options are chosen, it will be under c:\adb
downloading the necessary files.
download twrp from link thanks to @olddroid for his original thread . Rest of the contributor and credit in original thread by olddroid.
move the downloaded file under c:\adb or wherever you have installed the adb.
download the supersu file from this link and put it in sd card or keep handy on pc so that you can copy to internal memory later.
get the unlock as mentioned in this thread
actual procedure
unlocking the bootloader-
backup all your data as unlocking the bootloader will reset the device and all your data will be erased.
on windows machine, go to folder c:\adb or wherever you installed the adb drivers.
press shift+right click together and select open command prompt here
run - adb reboot bootloader (this command may prompt for acceptance of rsa key if not already accepted)
this will boot the phone into bootloader mode.
run - fastboot oem unlock <16 digit unlock code- put your actual code you obtained from huawei site > (this step will unlock the bootloader and will erase all your data)
phone will restart automatically.
installing twrp
once on the system, open the powershell or command prompt again in adb folder (can use the previous instance as well)
run - adb reboot bootloader
once in bootloader, run - fastboot flash recovery twrp-3.1.1-0-venus.img (this will install the twrp recovery for emui 5.0 on your phone)
once done with the flashing the twrp, run - fastboot reboot
rooting
once booted to system, open the powershell or command prompt in adb folder (can use the previous instance as well)
run - adb reboot recovery
and your phone will boot into the twrp recovery.
copy the superu file downloaded to sd card or internal memory.
install the supersu zip.
reboot and enjoy.
Happy flashing.
Click to expand...
Click to collapse
works perfect at me , thank you so much
here is my phone model and android version
Thank you so much... Love ya for this! I wish u all the success for future works..
shashank1320 said:
Did not find any post mentioning rooting for 5C on EMUI. If there are any, let me know and I will take down this thread.
Note-
Applicable for Windows 7, Windows 8 and Windows 10
Similar steps are applicable for EMUI 4.X as well but TWRP file will change.
Saw many user on Honor 5C FB page and on XDA struggling to get root working on EMUI 5. most of the cases I saw, were for EMUI 5.X. I followed the steps mentioned or as applicable for any devices and I did not face any issue so though of compiling this guide for new users who may have faced issue or not able to root the phone. (may be mainly because of correct and working TWRP issue) . I will just simplify the steps so that any new users can do this without any problem and without any prior experience to rooting, it may be long but will be the simple enough for all the users.
Prerequisites-
Enable the developer option in settings-
Go to Settings--> About Phone-->Tab build number 7 times to enable this setting.
Go back in setting page, just above system update, you will see a new menu as -Developer Options
Scroll for the debugging section and enable the USB Debugging
You will be prompted for the confirmation with RSA key, just accept it.
Enable OEM Unlock in Developer Options (just above the USB debugging option) – Most probably this option will not be there on EMUI 5.0 (only few have seen on EMUI but it was there on EMUI 4.1 for all but rarely on EMUI 5.0 or may be because I have used dload most of the time which grayed out this)
Installation of required Drivers.
Connect your phone to PC and install Hi Suite on PC and it will additionally install all the necessary drivers to PC and HiSUite on Mobile.
Download and Install ADB from Link
Accept all the prompts and install ADB drive system wise.
Once installation is completed, if default options are chosen, it will be under C:\adb
Downloading the necessary files.
Download TWRP from Link Thanks to @OldDroid for his Original Thread . Rest of the contributor and credit in original thread by OldDroid.
Move the downloaded file under C:\adb or wherever you have installed the ADB.
Download the SuperSU file from this Link and put it in SD card or keep handy on PC so that you can copy to internal memory later.
Get the unlock as mentioned in this thread
Actual Procedure
Unlocking the bootloader-
Backup all your data as unlocking the bootloader will reset the device and all your data will be erased.
On windows machine, go to folder C:\adb or wherever you installed the adb drivers.
Press shift+right click together and select Open command prompt here
Run - adb reboot bootloader (this command may prompt for acceptance of RSA key if not already accepted)
This will boot the phone into bootloader mode.
Run - fastboot oem unlock <16 digit unlock code- Put your actual code you obtained from Huawei site > (This step will unlock the bootloader and will erase all your data)
Phone will restart automatically.
Installing TWRP
Once on the system, open the PowerShell or command prompt again in ADB folder (can use the previous instance as well)
Run - adb reboot bootloader
Once in bootloader, Run - fastboot flash recovery twrp-3.1.1-0-venus.img (This will install the TWRP recovery for EMUI 5.0 on your phone)
Once done with the flashing the TWRP, Run - fastboot reboot
Rooting
Once booted to system, open the PowerShell or command prompt in ADB folder (can use the previous instance as well)
Run - adb reboot recovery
And your phone will boot into the TWRP recovery.
Copy the SuperU file downloaded to SD card or Internal memory.
Install the SuperSU zip.
Reboot and enjoy.
Happy Flashing.
Click to expand...
Click to collapse
Thank you so much... Love ya for this! I wish u all the success for future works..
tahahaiyat said:
Thank you so much... Love ya for this! I wish u all the success for future works..
Click to expand...
Click to collapse
Thanks for lovely wishes
Hi all.
I need help with installation ADB. Download file, start installation, accept all the prompts but 0 files copied and dont have file under C:\adb.
What is wrong? How install ADB?
Thanks
outcastWBC said:
Hi all.
I need help with installation ADB. Download file, start installation, accept all the prompts but 0 files copied and dont have file under C:\adb.
What is wrong? How install ADB?
Thanks
Click to expand...
Click to collapse
Method is same as given in instructions. It shoukd install without issue buddy
Hello,
I had the NEM-L51 from my mother running EMUI 4.0x, and decided to upgrade it to the latest version.
It was unlocked, with TWRP as recovery, and rooted.
I did flash back the stock recovery (from HuaweiUpdateExtractor/Update.app), rebooted the device, and applied the OTA (B350 first, then latest B357).
Until then everything is fine, but when I try to flash the TWRP recovery, it doesn't work :
D:\Android\platform-tools>fastboot flash recovery D:\Downloads\twrp-3.1.1-0-venus.img
target reported max download size of 471859200 bytes
sending 'recovery' (24464 KB)...
OKAY [ 0.719s]
writing 'recovery'...
FAILED (remote: Command not allowed)
finished. total time: 0.734s
D:\Android\platform-tools>fastboot flash recovery D:\Downloads\twrp-3.2.1-0-nemo.img
target reported max download size of 471859200 bytes
sending 'recovery' (21972 KB)...
OKAY [ 0.672s]
writing 'recovery'...
FAILED (remote: Command not allowed)
finished. total time: 0.672s
D:\Android\platform-tools>fastboot flash recovery D:\Downloads\twrp-3.1.1-0-nemo.img
target reported max download size of 471859200 bytes
sending 'recovery' (21918 KB)...
OKAY [ 0.641s]
writing 'recovery'...
FAILED (remote: Command not allowed)
finished. total time: 0.656s
Click to expand...
Click to collapse
Neither the recommended Venus one, or the current / previous nemo one can be flashed.
Phone and FRP status in fastboot mode both shows Unlocked / Unlock, and the OEM Unlock option in EMUI Developper Settings is also enabled (I toggled it just to be sure).
I'm not sure what's wrong.
Would the update mess with the OEM unlock (by relocking and showing a wrong status) ?
I'd rather not try fastboot OEM unlock with the code (still have it somewhere) and lose data.
Thanks for any advice
Fr33L4nc3r said:
Hello,
I had the NEM-L51 from my mother running EMUI 4.0x, and decided to upgrade it to the latest version.
It was unlocked, with TWRP as recovery, and rooted.
I did flash back the stock recovery (from HuaweiUpdateExtractor/Update.app), rebooted the device, and applied the OTA (B350 first, then latest B357).
Until then everything is fine, but when I try to flash the TWRP recovery, it doesn't work :
Neither the recommended Venus one, or the current / previous nemo one can be flashed.
Phone and FRP status in fastboot mode both shows Unlocked / Unlock, and the OEM Unlock option in EMUI Developper Settings is also enabled (I toggled it just to be sure).
I'm not sure what's wrong.
Would the update mess with the OEM unlock (by relocking and showing a wrong status) ?
I'd rather not try fastboot OEM unlock with the code (still have it somewhere) and lose data.
Thanks for any advice
Click to expand...
Click to collapse
This should work fine but if not, can try Hassan's recovery
shashank1320 said:
This should work fine but if not, can try Hassan's recovery
Click to expand...
Click to collapse
Before trying that recovery, I just tried to flash the stock one from NEM-L51C432B357 full OTA package, and it doesn't work either
D:\Android\platform-tools>fastboot flash recovery D:\Android\HuaweiUpdateExtractor_0.9.9.5\RECOVERY.img
target reported max download size of 471859200 bytes
sending 'recovery' (35570 KB)...
OKAY [ 0.932s]
writing 'recovery'...
FAILED (remote: Command not allowed)
finished. total time: 0.954s
Click to expand...
Click to collapse
So it's not a recovery issue.
How useful is the HiSuite backup ?
If I make a backup with it, will it be able to restore most user app's and system's data ?
I'd rather not re set everything up, and I'm afraid I'll have to retry to OEM unlock the device (so force wipe), even if it says it's unlocked (which it should have remained in the first place)
Fr33L4nc3r said:
Before trying that recovery, I just tried to flash the stock one from NEM-L51C432B357 full OTA package, and it doesn't work either
So it's not a recovery issue.
How useful is the HiSuite backup ?
If I make a backup with it, will it be able to restore most user app's and system's data ?
I'd rather not re set everything up, and I'm afraid I'll have to retry to OEM unlock the device (so force wipe), even if it says it's unlocked (which it should have remained in the first place)
Click to expand...
Click to collapse
Hisuite can be used for back.. reliable one but not same as titanium backup. Backup WhatsApp on local and g drive. Zip the WhatsApp folder in internal memory and then copy to pc.
Rest other apps, via hisuite (can backup WhatsApp as well here).
Fr33L4nc3r said:
Before trying that recovery, I just tried to flash the stock one from NEM-L51C432B357 full OTA package, and it doesn't work either
So it's not a recovery issue.
How useful is the HiSuite backup ?
If I make a backup with it, will it be able to restore most user app's and system's data ?
I'd rather not re set everything up, and I'm afraid I'll have to retry to OEM unlock the device (so force wipe), even if it says it's unlocked (which it should have remained in the first place)
Click to expand...
Click to collapse
You file should be in path D:\Android\platform-tools\ and not D:\Android\HuaweiUpdateExtractor_0.9.9.5\
I hope adb is installed under D:\Android\platform-tools\, if not, it will be udner C drive as C:\adb\
copy the recovery file whereever the adb is installed and then run the command
fastboot flash recovery twrp-3.1.1-0-venus.img (replace name with your actual file name)
Ok, so in fact fastboot OEM unlock status was not accurate, and something I didn't notice was the absence of dm-verity warning when booting (showing when it's actually unlocked)
Fr33L4nc3r said:
Ok, so in fact fastboot OEM unlock status was not accurate, and something I didn't notice was the absence of dm-verity warning when booting (showing when it's actually unlocked)
Click to expand...
Click to collapse
May be. try moving the files and then flashing from that folder and see if it works.
stopin phone
hello.please help me.last night i unlocked my gt3 and reseted factory data.but after these my phone stopped in page that typed "your device is booting now..." . but nothing going change.
when i hold power key or power key with volume up down , my phone get restart and show huawei mark and after that show the pervious page that i stoped in it and nothing change again.what can i do? :crying::crying::crying::crying:
please help me, my device is Huawei GT3 (honor 5c) (NMO L31) it was unlock bootloader before i bought it and now i want to install twrp, so i have to learn a lot of website and Follow me, I downloaded and installed Adb, installed the driver, then downloaded the twrp version with nemo honor for honor 5c, then open CMD or powershell to write commands like adb reboot bootloader then adb fastboot flash recovery twrp.img is under the writing that says Failed (remote: image verification error), I previously copied the twrp 3.0 file ... into the adb folder and renamed to twrp. Now I have to do to install twrp on my device. Please help me.
Hello, I have an NMO_L31 (honor 5c - huawei gr5 mini) device and I have experienced a Failed (remote: image verification error) error when installing TWRP while my phone was unlocked before. have searched from a lot of technology pages to find remedies but all failed. But my God, Jehovah listened to my plea and brought me to @shashank123, I contacted him through XDA and I got him a phone number to make friends on the telegram, he helped me out I and I have overcome the above error. I would like to explain how to overcome the error that I tried. First, I went back to emui 4.1.2 (you can see the instructions then allow OEM unlock, then I update the OTA to emui 5, allow usb debugging when the update is complete. Shift + Right click on CMD (or powershell) and enter "adb devices" to see the connected device, then enter "adb reboot bootloader" then enter "fastboot oem get-bootinfo" To check if the bootloader has been unlocked, then enter the command "fastboot oem unlock (code)" to unlock if the relock bootloader, then if the bootloader has been unlocked then the purpose of the command to factory reset. If that is the case, then go to the phone and see if factory reset is complete. Then develop and reconnect to adb, check the device connected to the "adb devices" command then go to the "adb reboot bootloader" command to get to the fastboot and then use the command "fastboot flash recovery recovery_name.img" (for example : Twrp) "Finally, if the word OKEY appears, you are successful. If you can not solve this problem, please send a message to @shashank123 in XDA and ask for his phone number to make friend through telegram and regular help message because he does not often use XDA. Thank you very much Shashank for helping me. Thanks be to my god JESU CHRIST and JEHOVAH.
tanhoang1702 said:
Hello, I have an NMO_L31 (honor 5c - huawei gr5 mini) device and I have experienced a Failed (remote: image verification error) error when installing TWRP while my phone was unlocked before. have searched from a lot of technology pages to find remedies but all failed. But my God, Jehovah listened to my plea and brought me to Shashank123, I contacted him through XDA and I got him a phone number to make friends on the telegram, he helped me out I and I have overcome the above error. I would like to explain how to overcome the error that I tried. First, I went back to emui 4.1.2 (you can see the instructions then allow OEM unlock, then I update the OTA to emui 5, allow usb debugging when the update is complete. Shift + Right click on CMD (or powershell) and enter "adb devices" to see the connected device, then enter "adb reboot bootloader" then enter "fastboot oem get-bootinfo" To check if the bootloader has been unlocked, then enter the command "fastboot oem unlock (code)" to unlock if the relock bootloader, then if the bootloader has been unlocked then the purpose of the command to factory reset. If that is the case, then go to the phone and see if factory reset is complete. Then develop and reconnect to adb, check the device connected to the "adb devices" command then go to the "adb reboot bootloader" command to get to the fastboot and then use the command "fastboot flash recovery recovery_name.img" (for example : Twrp) "Finally, if the word OKEY appears, you are successful. If you can not solve this problem, please send a message to Shashank123 in XDA and ask for his phone number to make friend through telegram and regular help message because he does not often use XDA. Thank you very much Shashank for helping me. Thanks be to my god JESU CHRIST and JEHOVAH.
Click to expand...
Click to collapse
No problem at all mate. Helping through telegram was quick in real time rather multiple post or message and then waiting for response from each other. Due to time crunch, I opted to quick help rather keep you waiting all day long
Good you got your phone as per your requirement and able to do what you wanted. Thanks and Enjoy.
You can edit your comment to say "@shashank1320" (use without double quotes) rather Shashank123 as users may send message or qoute him and get no response as that user may or may not exist :silly:
grand.mohammad said:
hello.please help me.last night i unlocked my gt3 and reseted factory data.but after these my phone stopped in page that typed "your device is booting now..." . but nothing going change.
when i hold power key or power key with volume up down , my phone get restart and show huawei mark and after that show the pervious page that i stoped in it and nothing change again.what can i do? :crying::crying::crying::crying:
Click to expand...
Click to collapse
Boot to bootloader again and see the bootloader state if locked or unlocked. Try unlocking it again.
Hey guys! Hope you all are doing well
I wanted to lock my Mi A1's bootloader without losing data , twrp and magisk aren't installed.
Will the fastboot oem lock command work?
I dont know if it will but u can try
---------- Post added at 04:28 PM ---------- Previous post was at 04:14 PM ----------
but if it doesnt work u can just do this:
enable automatic backuping in the settings and also download google photos (if u dont use it u scub) and wait for it to backup ur photos
its good for backing up ur photos and saving A LOT of storage on ur phone
download the stock rom from here: http://en.miui.com/download-333.html
and download this tool: http://en.miui.com/forum.php?mod=att...kxMTB8ODA3MjUy
decompress the rom even if u dont actually see that anything is inside when u open it from winrar
make sure google backed up everything and if it did then reboot ur phone to bootloader mode and start the tool
click on refresh in the tool and u should see ur phone string
then click on browse and take it to this folder
tissot_images_V9.6.4.0.ODHMIFE_20180712.0000.00_8. 0_735823083f\tissot_images_V9.6.4.0.ODHMIFE_8.0
matters what u chose it might be just: tissot_images_V9.6.4.0.ODHMIFE_8.0
then in the bottom right make sure its clean all and lock
and then press on flash and wait, i heard someone say they bricked their phone when they flashed using miflash because a power outage happend and the proccess stopped so make sure u dont accidentally unplug ur phone from the pc
when finished the phone will auto restart itself and u should be having stock rom
and then in setup restore to ur google backup and then it will download the apps from google play store so it might take a while if u have slow internet connection
if u have any questions I'll be glad to answer them if I can
ImMohdAbubakar said:
Hey guys! Hope you all are doing well
I wanted to lock my Mi A1's bootloader without losing data , twrp and magisk aren't installed.
Will the fastboot oem lock command work?
Click to expand...
Click to collapse
I think that is not possible . Unlock and lock bootloader equal format data .
mar.ur said:
I think that is not possible . Unlock and lock bootloader equal format data .
Click to expand...
Click to collapse
So basically I can lock the bootloader through that command but I'll end up with wiped system?
ImMohdAbubakar said:
So basically I can lock the bootloader through that command but I'll end up with wiped system?
Click to expand...
Click to collapse
Remember that you must have stock recovery and stock system without root when you can lock bootloader . Yes , relock bootloader always format data . Do you remember what happened when you unlock bootloader ?
But you can try this . Do a backup before
https://www.google.pl/amp/s/forum.x...scussion-bypass-wipe-oem-unlock-t3804406/amp/
Good lack
you can bypass wiping by pressing and holding "volume -" while executing the command
Turn the phone into fastboot mode, then connect it to pc
Open cmd from fastboot/platform tools folder
Type:
fastboot devices, to make sure that your device is detected.
Then type
fastboot oem lock - before pressing enter hold the volume down button.
Press enter, keep holding volume down until phone restarts to fastboot.
Release volume down button.
Type:
fastboot reboot.
Voila, you will have locked bootloader without wiping data.
Tried this numerous time and never lost data!
Hi
Could anyone help me
How to root my p10 lite?
And any way to unlock my bootloder
After huawei closed the link for code?
MoNabil said:
Hi
Could anyone help me
How to root my p10 lite?
And any way to unlock my bootloder
After huawei closed the link for code?
Click to expand...
Click to collapse
Only way to unlock your bootloader is to pay for dc phoenix...
nemanjsb said:
Only way to unlock your bootloader is to pay for dc phoenix...
Click to expand...
Click to collapse
And how much for that?
MoNabil said:
And how much for that?
Click to expand...
Click to collapse
I don't know, register on dc phoenix and u will see.
EDIT: I found in a forum where they say that the price is 5$ for code.
Files you need (P10 Lite): https://mega.nz/#F!TNQiFDrS!LeWgM5bukSz66UEL5zE1Tg
Part 1 - Unlock Bootloader:
Full guide how to unlock your Bootloader via DC-Unlocker or HCU Client - https://forum.xda-developers.com/honor-7x/how-to/how-to-unlock-huawei-bootloader-removal-t3780903
* If you use HCU Client then TURN OFF your Antivirus because it detects parts of the program as a Trojan! But don't worry, it's safe!
Also see this tutorial here - http://hcu-client.com/read-bootloader-code-huawei-phone/
Install ADB drivers (adb-setup-1.4.3.exe)
Once you get the unlock code turn OFF the phone, press and hold only VOL DONW and connect it to PC via USB cable.
The phone will boot in to Bootloader mode.
Open PowerShell or CMD window and use this command:
fastboot oem unlock <your_unlock_code>
On the phone choose YES with the buttons and bootloader will unlock.
The phone will be factory reseted!!!
Part 2 - Root the phone:
Go to Settings -> System -> About Phone -> Click 7-8 times on the Build Number (until you see a message that you're developer)
Go to Settings -> System -> Developer options -> Enable USB Debugging
Turn OFF your Phone, press and hold VOL Down and connect it to the PC via USB cable.
The phone will boot in to Bootloader mode, but this time you will see this:
Bootloader: Unlocked
FRP: Unlocked
Open PowerShell or CMD window and use this command:
fastboot flash ramdisk patched_boot.img
fastboot reboot
That's all. Your phone is rooted with Magisk!
If you need just install latest Magisk Manager.
patched_boot.img is patched stock RAMDISK.img (boot file)
REMEMBER:
1. You CAN NOT install OTA update if you phone is rooted (during instalation gives error)
2. You CAN install only FullOTA update but you will lose the root
3. After every system update (FullOTA) you should run the phone to Bootloader mode and flash patched_boot.img again if you want root
nemanjsb said:
Only way to unlock your bootloader is to pay for dc phoenix...
Click to expand...
Click to collapse
Aalesund said:
Files you need (P10 Lite): https://mega.nz/#F!TNQiFDrS!LeWgM5bukSz66UEL5zE1Tg
Part 1 - Unlock Bootloader:
Full guide how to unlock your Bootloader via DC-Unlocker or HCU Client - https://forum.xda-developers.com/honor-7x/how-to/how-to-unlock-huawei-bootloader-removal-t3780903
* If you use HCU Client then TURN OFF your Antivirus because it detects parts of the program as a Trojan! But don't worry, it's safe!
Also see this tutorial here - http://hcu-client.com/read-bootloader-code-huawei-phone/
Install ADB drivers (adb-setup-1.4.3.exe)
Once you get the unlock code turn OFF the phone, press and hold only VOL DONW and connect it to PC via USB cable.
The phone will boot in to Bootloader mode.
Open PowerShell or CMD window and use this command:
fastboot oem unlock <your_unlock_code>
On the phone choose YES with the buttons and bootloader will unlock.
The phone will be factory reseted!!!
Part 2 - Root the phone:
Go to Settings -> System -> About Phone -> Click 7-8 times on the Build Number (until you see a message that you're developer)
Go to Settings -> System -> Developer options -> Enable USB Debugging
Turn OFF your Phone, press and hold VOL Down and connect it to the PC via USB cable.
The phone will boot in to Bootloader mode, but this time you will see this:
Bootloader: Unlocked
FRP: Unlocked
Open PowerShell or CMD window and use this command:
fastboot flash ramdisk patched_boot.img
fastboot reboot
That's all. Your phone is rooted with Magisk!
If you need just install latest Magisk Manager.
patched_boot.img is patched stock RAMDISK.img (boot file)
REMEMBER:
1. You CAN NOT install OTA update if you phone is rooted (during instalation gives error)
2. You CAN install only FullOTA update but you will lose the root
3. After every system update (FullOTA) you should run the phone to Bootloader mode and flash patched_boot.img again if you want root
Click to expand...
Click to collapse
This is for root or for unlock bootloder?
Can i unlock bootloder with out pay for that?
And what is the way to install rooted roms for my device..
MoNabil said:
This is for root or for unlock bootloder?
Can i unlock bootloder with out pay for that?
And what is the way to install rooted roms for my device..
Click to expand...
Click to collapse
This is unlock bootloader + root.
If you want rooted stock rom, then root is just one simple step: fastboot flash ramdisk patched_boot.img
There is no free way to unlock bootloader.
If you want to install custom roms then flash TWRP:
fastboot flash recovery_ramdisk TWRP.img
But DO NOT flash Pretoriano80's TWRP because it's for stock rom only and isn't support custom roms!!!
Maybe try this:
Haky86's TWRP - https://www.haky86.com/hi6250/twrp-emui-8-hi6250/
Haky86's Android 9.0 - https://www.haky86.com/hi6250/emui-8-hi6250/
ArrowOS and AOSP are stable.
Aalesund said:
This is unlock bootloader + root.
If you want rooted stock rom, then root is just one simple step: fastboot flash ramdisk patched_boot.img
There is no free way to unlock bootloader.
If you want to install custom roms then flash TWRP:
fastboot flash recovery_ramdisk TWRP.img
But DO NOT flash Pretoriano80's TWRP because it's for stock rom only and isn't support custom roms!!!
Maybe try this:
Haky86's TWRP - https://www.haky86.com/hi6250/twrp-emui-8-hi6250/
Haky86's Android 9.0 - https://www.haky86.com/hi6250/twrp-emui-8-hi6250/
ArrowOS and AOSP are stable.
Click to expand...
Click to collapse
Thanks
If i want to install root on my device
It is nessesary to unlock bootloder? or it is just separated step and helps to install roms
With new options and different features... Etc
MoNabil said:
Thanks
If i want to install root on my device
It is nessesary to unlock bootloder? or it is just separated step and helps to install roms
With new options and different features... Etc
Click to expand...
Click to collapse
U must unlock bootloader or u can't flash nothing. Free way to unlock bootloader was with huawei code but now u must pay for dc phoenix...
MoNabil said:
Thanks
If i want to install root on my device
It is nessesary to unlock bootloder? or it is just separated step and helps to install roms
With new options and different features... Etc
Click to expand...
Click to collapse
You are going to screw up your phone in this learning process .Unless you have another phone and this p10 is your 2nd phone then you can try & error .No matter what you must open yr bootloader to proceed next step .Means additional cost for sure .
Good luck
Well, I asked for huawei support for unlock code. I had to send them details and I got the code in almost a month
Hey there guys! Is it still available to get the code directly from huawei? How could I request them the code? I recently received this phone as present and it is as it came from factory but i want to install custom roms in my P10 lite is it still possible?
Thanks in advance for your help, I really wouldn't like to screw up my new phone! Cheers!
Aalesund said:
Files you need (P10 Lite): https://mega.nz/#F!TNQiFDrS!LeWgM5bukSz66UEL5zE1Tg
Part 1 - Unlock Bootloader:
Full guide how to unlock your Bootloader via DC-Unlocker or HCU Client - https://forum.xda-developers.com/honor-7x/how-to/how-to-unlock-huawei-bootloader-removal-t3780903
* If you use HCU Client then TURN OFF your Antivirus because it detects parts of the program as a Trojan! But don't worry, it's safe!
Also see this tutorial here - http://hcu-client.com/read-bootloader-code-huawei-phone/
Install ADB drivers (adb-setup-1.4.3.exe)
Once you get the unlock code turn OFF the phone, press and hold only VOL DONW and connect it to PC via USB cable.
The phone will boot in to Bootloader mode.
Open PowerShell or CMD window and use this command:
fastboot oem unlock <your_unlock_code>
On the phone choose YES with the buttons and bootloader will unlock.
The phone will be factory reseted!!!
Part 2 - Root the phone:
Go to Settings -> System -> About Phone -> Click 7-8 times on the Build Number (until you see a message that you're developer)
Go to Settings -> System -> Developer options -> Enable USB Debugging
Turn OFF your Phone, press and hold VOL Down and connect it to the PC via USB cable.
The phone will boot in to Bootloader mode, but this time you will see this:
Bootloader: Unlocked
FRP: Unlocked
Open PowerShell or CMD window and use this command:
fastboot flash ramdisk patched_boot.img
fastboot reboot
That's all. Your phone is rooted with Magisk!
If you need just install latest Magisk Manager.
patched_boot.img is patched stock RAMDISK.img (boot file)
REMEMBER:
1. You CAN NOT install OTA update if you phone is rooted (during instalation gives error)
2. You CAN install only FullOTA update but you will lose the root
3. After every system update (FullOTA) you should run the phone to Bootloader mode and flash patched_boot.img again if you want root
Click to expand...
Click to collapse
I followed all your steps. It seems all done but the root is not completed at the end. I guess I do something wrong in Part 2...