Okay guys so I bought a Huawei Nova 3i (INE-LX1) and the screen was smashed and not functioning. I replaced the screen and it’s pin locked
(no way to figure out what it is) and when I tried to go into recovery it’s asking me to type ‘yes’ on the keyboard to confirm. The problem is while the touchscreen works when the phone is booted it doesn’t work when it’s in recovery. Is there a certain tool or program I can use on my computer to flash or reset it? Any advice helps!
I got the same problem: touchscreen partly broken and need to do a Factory Reset.
So can't type the "YES"-confirmation in the EMUI-recovery.
Did you find a solution for this situation?
Related
Hello,
I have a problem with my "sharp softbank aquos phone 303sh" with standard rom.
I setup a pattern lock. Since I have not used the phone for some time I cannot remember the pattern anymore.
I thought an unlock with a hard reset is no problem. But I found no way to boot into recovery mode(tried power and minus button, power and plus button to boot).
Also the device did not show up in adb as a device(Windows 10/Sharp USB driver installed) but was recognized as a storage device.
The user manual says:
"Do not forget pattern, Lock No. passcode or password set for canceling Screen lock(write it down if necessary). If you forget it, visit the nearest SoftBank Shop for recovery procedure."
As I live in Germany and there are only softbank stores in Japan. So this is not possible for me.
Is there any other way to hard reset the device?
Thank you for your help.
Hello!
I'm in serious troubles... So I tried to update my phone and now I have next problems...
Phone is locked
FRP is locked
- This 2 means I cant unlock bootloader or anything via fastboot
I can boot into android, but I cant get into it, because I have factory reset protection and I have to enter my email, problem is that, that new update's keyboard doesn't work, instead of keyboard it opens Google Voice Typing, from which I can't enter sh*t....
So any suggestions please? I really need that phone... Thanks
Hello, my english is unfortunately not very good, so I translated with Google Translate.
I wanted to root my phone (Huawei Nova Can-L11) and used this guide.
https://forum.xda-developers.com/nova-plus/development/recovery-unofficial-twrp-huawei-nova-t3523473 .However, I have installed a wrong image or something go wrong .
Now the mobile always starts again, about 3 seconds. I briefly see the Huawei logo, and then the orange font that is not trusted.
The problem I had yesterday, but it somehow managed to close the OEM again, and the mobile ran normally.
It was with the power button and soft key, but this is probably no more.
Now I wanted to install the correct image, unlock oem and the error is back. But I can not come back. Adb and Fastboot find no device, and the PC is not synonymous displayed.
Maybe I'm too nervous for the key combination because it worked yesterday. But I'm just scared.
If my PC would display the mobile, I could possibly with fastboot go back to lock oem. But it does not indicate anything ..
Ask for help, I hope I have not completely destroyed it.
hi! i have bricked Nova Plus, after factory reset in TWRP. i use all method flash fiirmware - tel is bricked. i bay credit in DC Phoenix (15 evro) and download fullflash firmware. after flashing and factory reset,phone is boot sussec. after full boot i flash firmware from hwmt. after flashing run factory reset- boot- tel is fully working!
always wait for 10-15 minutes after a flash/reboot...it takes some time...IF after 15 minutes its still on phone booting well...youre in bootloop
Hi from Lithuania!
please help someone
short story - i tried to flash recovery image via asus flash tool and when it stuck. now i havent any droid at begining no recovery option, and when it powers up touch screen dont work.
long story- 1. my friend ask to remove password from zenpad,his children add it. password with program app lock or something.
2. i tried to do hard reset but i didnt find the combination (it was very strange) only three options comes with vol down and pow. nothing comes with vol up.
3. i decide to flash it to stock firmware, download stock img drivers and etc.
4. i used asus flash tool, and it stucks at the moment, and now i cannot flash it anymore. the symptoms are-
nothing comes when power up(only light)
when its power on touch screen not working,but still see the locked app and all concent.also cannot turn it off (need mouse to turn it off)
how i can get out of this situation? how to fix it ? please help guys, i dont have any minds now, searched info for 1 week, but maybe bad.
Greetings from Lithuania
the biggest question how to get the device to bootloader? i cannot to it by buttons
Hi,
I have bought the Tesla style head unit from KIRINAVI shop on ALIEXPRESS. It has been working fine for months.
Few days ago I wanted to update the software, so I looked in the factory settings section, where options are labeled with bad translation, I clicked on one setting which I don't remember the title any more and suddenly the screen was locked and asked me to enter a passcode to access the unit! All attempts to enter passwords or pin did not work.
Rebooting or resetting using a pin works but I am stuck with a passcode challenge.
So I think the best way to solve this is to reset to factory settings. How can I do that without being able to access the settings or anything in the unit??
Does anyone know if it is possible to do a factory reset on this unit through accessing the recovery mode maybe?
The seller is of no help. I searched everywhere on the net and on this forum and could not find an answer.
I did manage to update the software by downloading the XY files and putting them on a u stick thumb while resetting with a pin.
Unfortunately even after the update the screen lock was still there.
Any help is appreciated.