so here goes my story. My s10+ end the battery and when I charge it, started bootlooping. I really don't understand why thats happening to me. I tried everything, safe mode reset, hard reset, wipe cache and installing a new firmware, i used three diferentes Odins and dosen't work. I did a lot of questions here and I really appreciate for the help, but this is the end I think, if someone knows what more else can I do it, please tell me.
PS:sorry for the grammar, I'm brazilian guy
Try this link:
naldotech dot com/how-to-unbrick-samsung-galaxy-s10-stuck-in-bootloop/
rubenswing said:
Try this link:
naldotech dot com/how-to-unbrick-samsung-galaxy-s10-stuck-in-bootloop/
Click to expand...
Click to collapse
I already try this itens, but thanks. The ffirmware was my hope, didn't work, I installed the correct one.
Then I guess it's nothing more than an expensive paperweight
rubenswing said:
Then I guess it's nothing more than an expensive paperweight
Click to expand...
Click to collapse
yeah i cant understand how thats happening. dosent make sense.
Did you try re-installing the firmware through smart switch
rubenswing said:
Did you try re-installing the firmware through smart switch
Click to expand...
Click to collapse
this I have not tried. In fact, I didn't even know I could do that. how I do?
Desvtr said:
this I have not tried. In fact, I didn't even know I could do that. how I do?
Click to expand...
Click to collapse
I research for a video and see very easy and very much safe than odin metod. Thank you very much man, i will try and post my result here
Desvtr said:
this I have not tried. In fact, I didn't even know I could do that. how I do?
Click to expand...
Click to collapse
Charge your phone for some time and see if it turns on and if it does go to download mode or emergency recovery screen is download mode too and try the following steps
1. While your phone is on the Emergency Recovery Screen or download mode, connect it to the computer.
2. Open Odin and load all the firmware files. Download the original firmware file
3. You will find that Odin has already detected your phone.
4. The options checked in Odin should be F.Reset.Time and Auto-Reboot.
5. After making all the preparations, click on the “Start” button in Odin.
6. Let the firmware flashing end. Once done, disconnect the phone and let it turn on. You will be out of the Emergency Recovery/Download mode Screen now.
IMP: Download the original firmware file for your phone
Any update on this thread as it might be similar to my issue
Samsung S10 + bootloop ERASE FAIL: READ ONLY
Samsung S10 + SM-F975F/DS IMEI stating Taiwan (Update: Very contradicting information if the phone is Snapdragon OR Exynos) if it even matters to solve the issue I dont know Owner of the above since 2019 without issues; USB debugging mode...
forum.xda-developers.com
Related
Hi all!
im new here and i need help!
my galxy note 3 LTE don't boot and i can't enter to recovery mode.
First time that i have this problem i solved it by a new flash stock rom and nand erase all.
But this time it dont work.
the phone just vibrate one time and display the logo samsung galaxy note 3 sm-n9005 and the screen turn back black with a second vibration and do the same again and again...
I can enter to download.
Need your help please and sorry my english is so bad.
thanks to all.
rodyrach said:
Hi all!
im new here and i need help!
my galxy note 3 LTE don't boot and i can't enter to recovery mode.
First time that i have this problem i solved it by a new flash stock rom and nand erase all.
But this time it dont work.
the phone just vibrate one time and display the logo samsung galaxy note 3 sm-n9005 and the screen turn back black with a second vibration and do the same again and again...
I can enter to download.
Need your help please and sorry my english is so bad.
thanks to all.
Click to expand...
Click to collapse
You mean you have done a battery pull and then you still can't enter download mode by pressing that three button combos?
devilsdouble said:
You mean you have done a battery pull and then you still can't enter download mode by pressing that three button combos?
Click to expand...
Click to collapse
i do enter download mode but not in recovery mode to perform a wipe data.
i can flash stock rom and odin say pass in green but the phone reboot at samsung galaxy note 3 sm-n9005 with recovery booting in blue on top of screen
rodyrach said:
i do enter download mode but not in recovery mode to perform a wipe data.
i can flash stock rom and odin say pass in green but the phone reboot at samsung galaxy note 3 sm-n9005 with recovery booting in blue on top of screen
Click to expand...
Click to collapse
I don't understand the part I bold. Is it bootloop still, even after flashing a stock ROM via Odin successfully? That's weird!
I think you can wipe your phone via ADB, not sure though.
devilsdouble said:
I don't understand the part I bold. Is it bootloop still, even after flashing a stock ROM via Odin successfully? That's weird!
I think you can wipe your phone via ADB, not sure though.
Click to expand...
Click to collapse
Yes exactly!
Even after flash stock rom via odin it still bootloop just at start up.
What is ADB? Please help me to do that.
rodyrach said:
Yes exactly!
Even after flash stock rom via odin it still bootloop just at start up.
What is ADB? Please help me to do that.
Click to expand...
Click to collapse
I am very short on time, thus just giving you the link, however if you read thoroughly its pretty easy
http://forum.xda-developers.com/showthread.php?t=2141817
rodyrach said:
Yes exactly!
Even after flash stock rom via odin it still bootloop just at start up.
What is ADB? Please help me to do that.
Click to expand...
Click to collapse
hi, your problems are resolved?
devilsdouble said:
I am very short on time, thus just giving you the link, however if you read thoroughly its pretty easy
http://forum.xda-developers.com/showthread.php?t=2141817
Click to expand...
Click to collapse
Not yet! Im stuck at the job.
And Thanks devilsdouble. I try this as soon as i have a moment and tell you how it goes.
Thanks again for your help.
Happened to me but on the note 1 i flashed the pit files also for the phone using pdin and it fixed my problem. Maybe if all else fails try flasing stock rom with pit files using odin.
rodyrach said:
Not yet! Im stuck at the job.
And Thanks devilsdouble. I try this as soon as i have a moment and tell you how it goes.
Thanks again for your help.
Click to expand...
Click to collapse
before I start any thing
I understand the need to enable usb debugging in settings before using ADB.
is it important? because my phone does not start so I can access the settings to enable usb debugging
cryostasis25 said:
Happened to me but on the note 1 i flashed the pit files also for the phone using pdin and it fixed my problem. Maybe if all else fails try flasing stock rom with pit files using odin.
Click to expand...
Click to collapse
Hi i have already use pit file with stock rom via odin. same result. bootloop at the logo.
rodyrach said:
before I start any thing
I understand the need to enable usb debugging in settings before using ADB.
is it important? because my phone does not start so I can access the settings to enable usb debugging
Click to expand...
Click to collapse
Yes mate, I think its needed to be enabled. Still you can try and see if your phone shows up on ADB or not, there will be a six or eight digit code appearing on the ADB screen if the phone is successfully connected, but I guess you know that already by reading that topic.
You can ask ADB related queries in that topic too, I guess.
Do update here whatever happens.
devilsdouble said:
Yes mate, I think its needed to be enabled. Still you can try and see if your phone shows up on ADB or not, there will be a six or eight digit code appearing on the ADB screen if the phone is successfully connected, but I guess you know that already by reading that topic.
You can ask ADB related queries in that topic too, I guess.
Do update here whatever happens.
Click to expand...
Click to collapse
My phone dont show up on ADB.
rodyrach said:
My phone dont show up on ADB.
Click to expand...
Click to collapse
So you type adb device, and the device isn't showing up? Ah, that's normal I guess, knowing you can't turn on USB Debugging. I am out of help sadly. You need to get in touch with more advanced users now. I don't know if it's possible to turn on a phone's USB debugging mode without booting into the OS. You could ask in that topic though.
devilsdouble said:
So you type adb device, and the device isn't showing up? Ah, that's normal I guess, knowing you can't turn on USB Debugging. I am out of help sadly. You need to get in touch with more advanced users now. I don't know if it's possible to turn on a phone's USB debugging mode without booting into the OS. You could ask in that topic though.
Click to expand...
Click to collapse
My problem not solved
rodyrach said:
My problem not solved
Click to expand...
Click to collapse
Flash official lollipop poland done! still bootloop at "samsung galaxy note 3 sm-n9005".
can't access to recovery mode but download mode still working!
before to sleep i left the charger connected to the phone still bootloop until the morning and BANG i waked up saw lollipop samsung logo and blue led!
screen stucked at lollipop samsung logo!
i turned off the phone left in charge ( normal charge with animation in green battery, thing that did not before because as soon as I connected the charger to the phone it tried to boot and reboot all time after e few seconds with 2 vibrations) and gone to work.
go back home battery charged at 100%, tried to boot in recovery mode and it working!
i performed a wipe data factory reset and wipe cache partition and BANG my note 3 booted normally.
done a few hours and it works very well.
Thanks to all for your supports.
Really weird i don't understand whats happened during the night.
But im so glad .
Hi everyone, I'm new here. I have a problem regarding my galaxy grand prime sm-g530h. I have rooted that device. In the process of deleting system apps may be Ive deleted som other systems. When I reboot my phone it stucks on its name . Ive reset my factory data nd cache too. Now im anable to connect wiht samsung kies for emergency recovery. Because its not possible to connect samsung kies without enabling usb debug. I have searched many threads regarding my phones problem but didnt found anything. Is there anyone to help me out this situation? Suggestions will be appreciated.
rajukhadka19782 said:
Hi everyone, I'm new here. I have a problem regarding my galaxy grand prime sm-g530h. I have rooted that device. In the process of deleting system apps may be Ive deleted som other systems. When I reboot my phone it stucks on its name . Ive reset my factory data nd cache too. Now im anable to connect wiht samsung kies for emergency recovery. Because its not possible to connect samsung kies without enabling usb debug. I have searched many threads regarding my phones problem but didnt found anything. Is there anyone to help me out this situation? Suggestions will be appreciated.
Click to expand...
Click to collapse
You must use ODIN
go to download mode then flash your rom
rajukhadka19782 said:
Hi everyone, I'm new here. I have a problem regarding my galaxy grand prime sm-g530h. I have rooted that device. In the process of deleting system apps may be Ive deleted som other systems. When I reboot my phone it stucks on its name . Ive reset my factory data nd cache too. Now im anable to connect wiht samsung kies for emergency recovery. Because its not possible to connect samsung kies without enabling usb debug. I have searched many threads regarding my phones problem but didnt found anything. Is there anyone to help me out this situation? Suggestions will be appreciated.
Click to expand...
Click to collapse
i have same problem after i install app from google play try to flash rom can,t find 1 that work
plz help.
you need to use odin to flash the stock firmware back going into download mode and for rom just visit - http://www.sammobile.com/ and download firmware from there just see you model and select you country and download latest stock rom and flash it or else tell me your model number and country i will provide you link
AmGaD-SaLaH said:
You must use ODIN
go to download mode then flash your rom
Click to expand...
Click to collapse
Thanks dude for the suggestion.
me 2
Me 2, I want to unbrick it how to download my firmware?
Galaxy Grand Prime SM-G530/H/DV is Not accepting ODIN connection
Galaxy Grand Prime SM-G530/H/DV
Hi
I have Samsung Galaxy Grand Prime SM-G530/H/DV model . I did factory Reset . Then TouchWiz stopped problem arose. I disabled TouchWiz and installed APUS Launcher. That worked fine. Then I want to give cell to another person. I did Factory Reset again. After this the following problems arose.
1- A pop up massage during booting arose. “Unfortunately Process com. Android. systemUI has been stopped”
2- Above mentioned message hang the cell on Main Screen, I can not operate any function.
3- IMEI No. INVALID.
4- Mobile cannot be accepted connection with PC, ODIN, Kies etc.
Kindly guide me in this regard as I am a beginner in the matter of programming etc.
maq66 said:
Galaxy Grand Prime SM-G530/H/DV
Hi
I have Samsung Galaxy Grand Prime SM-G530/H/DV model . I did factory Reset . Then TouchWiz stopped problem arose. I disabled TouchWiz and installed APUS Launcher. That worked fine. Then I want to give cell to another person. I did Factory Reset again. After this the following problems arose.
1- A pop up massage during booting arose. “Unfortunately Process com. Android. systemUI has been stopped”
2- Above mentioned message hang the cell on Main Screen, I can not operate any function.
3- IMEI No. INVALID.
4- Mobile cannot be accepted connection with PC, ODIN, Kies etc.
Kindly guide me in this regard as I am a beginner in the matter of programming etc.
Click to expand...
Click to collapse
Seems like the EFS partition is broken (IMEI Invalid)
If You don't have any backups done by custom recovery, well... You're probably done.
I am having a similar problem. After enabling KNOX, which I thought was just another antivirus, my phone rebooted, and just got stuck. It would go to the boot page, with the name, and then it would act like it was gonna go to my home screen, but the screen would go black and it would start over. I cleared the cache and factory wiped it, but still no luck. I didn't enable usb debugging, and from what I know there is no way to enable it. I need it to use odin to flash a rom and start over. any suggestions?
dineshjumani said:
you need to use odin to flash the stock firmware back going into download mode and for rom just visit - http://www.sammobile.com/ and download firmware from there just see you model and select you country and download latest stock rom and flash it or else tell me your model number and country i will provide you link
Click to expand...
Click to collapse
Hay, @rajukhadka19782: Man, can you please tell me, whether you found a way to flash firmware with in a dead Samsung Galaxy Grand Prime, I mean my device is dead at all, it has no Download mode, no recovery. Just a light black screen and nothing more not even boot loops that could help me.
I need your help please try having some way out there
talvigi said:
Hay, @rajukhadka19782: Man, can you please tell me, whether you found a way to flash firmware with in a dead Samsung Galaxy Grand Prime, I mean my device is dead at all, it has no Download mode, no recovery. Just a light black screen and nothing more not even boot loops that could help me.
I need your help please try having some way out there
Click to expand...
Click to collapse
I'm with the same problem! All solutions need to go to download or recovery mode, but I can't turn on my phone and Odin can't catch it! Please, could somebody help me?
Thanks!
lucas13garcia said:
I'm with the same problem! All solutions need to go to download or recovery mode, but I can't turn on my phone and Odin can't catch it! Please, could somebody help me?
Thanks!
Click to expand...
Click to collapse
Does your device start at all or not? if it starts tell me what do you see? Is the battery charged, anden have you tried Odin 1.87, and have you tired to flash repair firmware 4.4.4, please Try it and make sure to only flash BL file first.
Sent from my SAMSUNG-SM-G920A using Tapatalk
talvigi said:
Does your device start at all or not? if it starts tell me what do you see? Is the battery charged, anden have you tried Odin 1.87, and have you tired to flash repair firmware 4.4.4, please Try it and make sure to only flash BL file first.
Sent from my SAMSUNG-SM-G920A using Tapatalk
Click to expand...
Click to collapse
Hey, thank you for the help!
It starts and it doesn't! With the battery, after I try to turn on, it keeps blinking repeatedly and stops only if I remove the battery. And my issue with any fix that I try to flash is that the computer doesn't recognize, probably cuz the blinking blue light is just a random light and not the phone actually trying to turn on... so Odin, for example, doesn't catch any device!
Is there any way to make the computer recognize it? I already tried some usb drivers, but nothing so far... BTW, I have a windows 10.
Thanks!
lucas13garcia said:
Hey, thank you for the help!
It starts and it doesn't! With the battery, after I try to turn on, it keeps blinking repeatedly and stops only if I remove the battery. And my issue with any fix that I try to flash is that the computer doesn't recognize, probably cuz the blinking blue light is just a random light and not the phone actually trying to turn on... so Odin, for example, doesn't catch any device!
Is there any way to make the computer recognize it? I already tried some usb drivers, but nothing so far... BTW, I have a windows 10.
Thanks!
Click to expand...
Click to collapse
Well Windows 10 64bit has been creating problems for many many people in the forum and I have seen people running vm and win 7 for the best results. And something very important I must say is that, most of the new computers do have USB 2.0 ports but they are limited in number, so you should find one on ur PC, to us it specifically for phone tweaking softwares. I would suggest you find another PC or laptop around,
Sent from my SAMSUNG-SM-G920A using Tapatalk
talvigi said:
Hay, @rajukhadka19782: Man, can you please tell me, whether you found a way to flash firmware with in a dead Samsung Galaxy Grand Prime, I mean my device is dead at all, it has no Download mode, no recovery. Just a light black screen and nothing more not even boot loops that could help me.
I need your help please try having some way out there
Click to expand...
Click to collapse
Without recovery or Download mode, you'll need to take it to someone with a black box or jtag.
If you can access a working phone of your same model, you can boot download mode from sd
http://forum.xda-developers.com/grand-prime/development/fix-g530-debrick-img-guide-to-make-t3422115
Guys, I just tried to root my samsung galaxy grand prime but now it is not booting up. it just shows the logo and the screen becomes black after that. also dowload mode is not working. same thing happens when i try to go into download mode
mrunank said:
Guys, I just tried to root my samsung galaxy grand prime but now it is not booting up. it just shows the logo and the screen becomes black after that. also dowload mode is not working. same thing happens when i try to go into download mode
Click to expand...
Click to collapse
What happens when you go to download mode?
---------- Post added at 06:10 PM ---------- Previous post was at 06:09 PM ----------
mrunank said:
Guys, I just tried to root my samsung galaxy grand prime but now it is not booting up. it just shows the logo and the screen becomes black after that. also dowload mode is not working. same thing happens when i try to go into download mode
Click to expand...
Click to collapse
Did you try wiping cache and what is your model?
waleeds1 said:
What happens when you go to download mode?
---------- Post added at 06:10 PM ---------- Previous post was at 06:09 PM ----------
Did you try wiping cache and what is your model?
Click to expand...
Click to collapse
My model is SM530H I cannot enter the recovery mode to wipe the cache . When I try to go into the recovery mode, samsung logo flashes and then the screen goes blank. Same thing happens when i try to normally switch on the phone
mrunank said:
My model is SM530H I cannot enter the recovery mode to wipe the cache . When I try to go into the recovery mode, samsung logo flashes and then the screen goes blank. Same thing happens when i try to normally switch on the phone
Click to expand...
Click to collapse
What about download mode? Btw it should not go to logo it should go to recovery after bootimage. You should hold down power home and volume down untill download mode comes or power home and volume up untill recovery menu comes
was flashing my s5 to XtreStoLite 2.2 with odin used the wrong bootloader by mistake was gonna fix it now odin says added,removed,added
not even my pc recognizes my phone anymore dl usb drivers tried kies nothing works is my phone done for ?.
Flash it with a stock firmware.
Riyal said:
Flash it with a stock firmware.
Click to expand...
Click to collapse
i cant odin wont let me s5 keeps connecting disconnecting tried other usb's same result
Can you explain further? How can you say you can't? Does it go to download mode? Download mode is totally separate from bootloader so as long as you can go there even if you don't have any bootloader it should work.
Riyal said:
Can you explain further? How can you say you can't? Does it go to download mode? Download mode is totally separate from bootloader so as long as you can go there even if you don't have any bootloader it should work.
Click to expand...
Click to collapse
yes i can go to download mode it's just that odin's keeps addeding the device and removing it constantly not allowing me to flash or do anything.
Justsomeguym8! said:
yes i can go to download mode it's just that odin's keeps addeding the device and removing it constantly not allowing me to flash or do anything.
Click to expand...
Click to collapse
https://ghostbuster.codeplex.com/
Unplug S5
Run as Admin
Right click the top of each section and choose "Add Class"
Once all are selected, "Remove ghosts" at the bottom then plug in S5 again
See if that helps
Hello
I have F version, country Italy
I tried install a few roms but I always had freeze screen and reboots. So finally tried restore from Odin and I had brick. I used the last firmware from Odin and one from this forum of "Fast download" And this only shows the bootimage and reboot again of freeze
In download mode shows in System: "custom", Recovery: Samsung Oficial
I cant enter on recovery mode
Im not sure if Samsung I still give me "warranty"
Anybody can help me ?
PD: sorry4myenglish
best bet is to try and flash another ROM if you can get into download mode still (making sure that you flash a ROM for the right version of your phone).
Samsung probably wont honor warranty as you tripped KNOX when flashing in the first place (that voids your warranty and I belive download mode states this)
EDIT:
the right version for you is the first link on the thread: http://forum.xda-developers.com/s6-...icial-stock-roms-firmware-aoj5-g928f-t3231589
as long as you have the SMG928F version from Italy
Natherul said:
best bet is to try and flash another ROM if you can get into download mode still (making sure that you flash a ROM for the right version of your phone).
Samsung probably wont honor warranty as you tripped KNOX when flashing in the first place (that voids your warranty and I belive download mode states this)
EDIT:
the right version for you is the first link on the thread: http://forum.xda-developers.com/s6-...icial-stock-roms-firmware-aoj5-g928f-t3231589
as long as you have the SMG928F version from Italy
Click to expand...
Click to collapse
Exactly that firmware made the brick on my phone
Ronalrago said:
Exactly that firmware made the brick on my phone
Click to expand...
Click to collapse
well it might be a corrupt download, but theres no MD5 for the files form that thread to match.
Can you enter download mode? If so then I would probably flash a custom recovery and install custom ROM just to get the phone running again.
Natherul said:
well it might be a corrupt download, but theres no MD5 for the files form that thread to match.
Can you enter download mode? If so then I would probably flash a custom recovery and install custom ROM just to get the phone running again.
Click to expand...
Click to collapse
Yep i can and I tried that, but the phone doesnt enter to recovery mode :crying:
Only can enter to dowloand mode
Ronalrago said:
Yep i can and I tried that, but the phone doesnt enter to recovery mode only:crying:
Only can enter to dowloand mode
Click to expand...
Click to collapse
then flash a new recovery from download mode and ODIN.
one example of a recovery can be founds in the instructions of
http://forum.xda-developers.com/s6-edge-plus/development/rom-audax-plus-v1-0-t3219017
EDIT:
or check
http://forum.xda-developers.com/s6-...-to-rooting-flashing-custom-recovery-t3200324
for custom recovery
Natherul said:
then flash a new recovery from download mode and ODIN.
one example of a recovery can be founds in the instructions of
http://forum.xda-developers.com/s6-edge-plus/development/rom-audax-plus-v1-0-t3219017
EDIT:
or check
http://forum.xda-developers.com/s6-...-to-rooting-flashing-custom-recovery-t3200324
for custom recovery
Click to expand...
Click to collapse
I just tried enter but only shows the message "recovery mode is senandroid enforcing" then shows (after 1 min maybe) the screen like a tv without signal
Some days ago I had exactly the same problem as you. You need to download "Smart Switch" on PC (something like samsung kies) and then recovery your phone through it. This samsung app will download a new system and completly repair your phone, after that if you want to install audax rom or something else you MUST go to developer options and enable USB DEBUGGING and OEM UNLOCK or you will have the same problem after rebooting phone.
Hope it helps, I bricked my phone for 1 day and managed to repair it with it. ODIN and all other stuff didn't worked.
DavidB93 said:
Some days ago I had exactly the same problem as you. You need to download "Smart Switch" on PC (something like samsung kies) and then recovery your phone through it. This samsung app will download a new system and completly repair your phone, after that if you want to install audax rom or something else you MUST go to developer options and enable USB DEBUGGING and OEM UNLOCK or you will have the same problem after rebooting phone.
Hope it helps, I bricked my phone for 1 day and managed to repair it with it. ODIN and all other stuff didn't worked.
Click to expand...
Click to collapse
Nice, I did not know that SmartSwitch for PC had build in recovery tools, but that is good to know.
Ronalrago said:
I just tried enter but only shows the message "recovery mode is senandroid enforcing" then shows (after 1 min maybe) the screen like a tv without signal
Click to expand...
Click to collapse
That message means that SElinux is enforced and the way around that is a custom kernel as the stock on is forcing it always.
Natherul after I bricked my phone by installing audax and the unchecking in dev options "oem unlock" Smart Switch was the only one thing that actually unbricked my phone :good:
DavidB93 said:
Some days ago I had exactly the same problem as you. You need to download "Smart Switch" on PC (something like samsung kies) and then recovery your phone through it. This samsung app will download a new system and completly repair your phone, after that if you want to install audax rom or something else you MUST go to developer options and enable USB DEBUGGING and OEM UNLOCK or you will have the same problem after rebooting phone.
Hope it helps, I bricked my phone for 1 day and managed to repair it with it. ODIN and all other stuff didn't worked.
Click to expand...
Click to collapse
I tried with this too. But says that doesnt support this model... Do u put in dowloand mode ? or how?
Ronalrago said:
I tried with this too. But says that doesnt support this model... Do u put in dowloand mode ? or how?
Click to expand...
Click to collapse
https://www.youtube.com/watch?v=y8AZyalTf5Y#t=109
DavidB93 said:
https://www.youtube.com/watch?v=y8AZyalTf5Y#t=109
Click to expand...
Click to collapse
ok thanks I used and works but still have reboots and doesnt recognize the touch :crying::crying:
The download mode now says System: Oficial
Maybe try once again ?
DavidB93 said:
Maybe try once again ?
Click to expand...
Click to collapse
I did again. Also tried with odin and nothing
:crying::crying:
Tried installing custom recovery didn't work out like I had hoped now im stuck with a phone that isn't detected by odin or kies but by MiFlash
Please tell me there is something I can do to fix it or get it to some sort of working order..? Is there a jtag tool or usb jig I can use?
Update - I found out the phone was still under warranty so I sent it away to be repaired. It was repaired and I now have a working phone !
ylmcc said:
Tried installing custom recovery didn't work out like I had hoped now im stuck with a phone that isn't detected by odin or kies but by MiFlash
Please tell me there is something I can do to fix it or get it to some sort of working order..? Is there a jtag tool or usb jig I can use?
Click to expand...
Click to collapse
What have you done to reach that state? I know that you're desperate but you must give some details if you want help.
It was given to me with 5.1.1 installed however it failed mid process and while on 5.1.1 it kept freezing and acting weird such as boot with weird errors and they only appeared after it was updated, I decided to root it with odin and it never fully rebooted after the was root applied. I finally got it to boot to stock and rooted and decided to install a custom recovery which was twrp while selecting the recovery it said if its a wrong location it will brick, with this in mind I checked the model with the one on their site and it seemed to make sense and applied it.
This caused the original problem which made it boot straight to download mode with it saying it could not normal boot. I then googled the problem and one said the pit was corrupted and downloaded the correct file. I then applied this through odin with stock firmware and it refuse to flash. At the time I was thinking a restart on the device would help, but it resulted in not booting at all and not being detected....
It does not light up or make a vibration when its connected or powered on if there is any solution it would be great...
Can anyone help or point in the right direction?
Hard brick SM-910F
Hello! If this is the good recovery for the N910F he would have from start.
Try to boot via the recovery flight up + home + power.
If you TWRP flash a custom in a first time rom
[email protected] said:
Hello! If this is the good recovery for the N910F he would have from start.
Try to boot via the recovery flight up + home + power.
If you TWRP flash a custom in a first time rom
Click to expand...
Click to collapse
Nothing however the pc did detect a new driver called qualcomm hs-usb qdloader 9008
ylmcc said:
Nothing however the pc did detect a new driver called qualcomm hs-usb qdloader 9008
Click to expand...
Click to collapse
qualcomm emergency download mode. is it called.
Tunestwo said:
qualcomm emergency download mode. is it called.
Click to expand...
Click to collapse
Anything I can do to get some sort of os on the phone now?
in this case via Odin tries to reinstall the tar of the official rom N910F .
ylmcc said:
Anything I can do to get some sort of os on the phone now?
Click to expand...
Click to collapse
Can you tell us if you can get on recovery screen, either TRWP or stock, or download mode.
You could try installing these drivers:
https://www.androidfilehost.com/?fid=24499762636000789
Reboot just in case and try to connect your device again.
(In download mode, with the key combination)
mangui said:
Can you tell us if you can get on recovery screen, either TRWP or stock, or download mode.
Click to expand...
Click to collapse
The phone does not display or respond when the keys are pressed, just a black screen..
Battlehero said:
You could try installing these drivers:
https://www.androidfilehost.com/?fid=24499762636000789
Reboot just in case and try to connect your device again.
(In download mode, with the key combination)
Click to expand...
Click to collapse
Chrome detected a virus in the rar
ylmcc said:
The phone does not display or respond when the keys are pressed, just a black screen..
Chrome detected a virus in the rar
Click to expand...
Click to collapse
Really? I just scanned it with VirusTotal and it is clean.
Virus Total Results
32Bit.exe scan results
64Bit.exe scan results
Battlehero said:
Really? I just scanned it with VirusTotal and it is clean.
Virus Total Results
32Bit.exe scan results
64Bit.exe scan results
Click to expand...
Click to collapse
I'll download it again but windows defender detected it too.
Edit - Yep did it again, here is a link to a photo of what I get but from virus total I don't get why its being flagged perhaps false positive ??
Update
Found a jtag service that is cheap will update once I get it back...
sm-n910f
I got a brick note 4 and i want to fix it
I search over the internet for this solution and found a method
Sd card repair boot but it did not work at all
I need help
thank you in advance