I have a droid milestone 2 that is no longer getting service from anywhere. No calls, no text, data and (curiously) no ability to connect to wifi. Went to bed one night, woke up and almost called off work!!! The phone is not rooted and I still have full access to the phone so I backed up everything that is on it and factory wiped it with no luck. Called Verizon, they reset it to defaults a second time with no luck and said that it was a defect with the software.
My question is that if it’s a defect with the software, would upgrading the firmware to ICS help?
If the answer is yes, can I even do it without data on the phone?
I looked up how-to’s on how to flash the firm ware and found a wiki page that helped
wiki.cyanogenmod.com/wiki/(deletethis)Motorola_Droid_2:_Full_Update_Guide
but this only worked when flashing to Cyanogenmod 7, the software downloadable from the page did not work with 9.
I know the apps I need is clockworkmod Recovery but I cannot install it from the app store because the phone isn’t getting any type of connection, and the version given from the wiki page can’t do Cyranogenmod 9. So I need an updated .apk file of clockworkmod recovery mod to upgrade the phone to ICS
Any help or guidance would e very very appreciated.
no replys?
Over 150 views with no ideas? Am I gonna have to send this phone to cellular heaven?
I would recommend that you SBF. You'll have to search for the one for the Milestone 2 since I'm guessing the firmware is slightly different than that of the US Droid 2.
To install a Rom like CM7 or 9 you need to buy Droid 2 Bootstrapper from the Play Store.
Thank you for the reply Mission
Per the wiki page, I am able SBF to 2.3.20 and can get CM7 installed with no problem. However, the phone did not reconnect to Verizon or WiFi. Thus I can’t buy bootstrapper from the play store as I have no connection to it. Unless someone knows of a way I can get a higher version of bootstrapper than version 1.0.0.5 (or at least a version that works with CM9) without the play market, I’m stuck ;_;
Google it. There are other sites that will let you download it.
Hey everyone, Hoping this isn't a dumb question, or posted in the wrong section... I'm new to everything Android development (I have always used Android, just never modified it in any way) So everything I know about the subject I have learned today on Google.
I purchased a used AT&T S5 SM-G900A... It had Safestrap installed, but was stuck in a bootloop.
I determined that the best option was to download Odin, and install stock firmware... I followed a write up I found on GalaxyS5Root.com.... However, after the download and reboot it works great, with one rather large exception... It won't connect to mobile data. Everything works when connected to Wi-Fi, but when not connected to Wi-Fi it won't access the internet... It can still do calls/texts though.
The only thing I noticed, was that his write up contained a .zip file for the firmware with 1 file inside which he installed with Odin.. The link to the AT&T firmware contained 4, of which Odin only allowed me to install 1, I chose the largest... I don't know that the other 3 would fix my problem, but it's the only thing I can think of at this point.
Anyways, thank you for any input, and if you need any additional information, let me know
Requ21
I was trying to root my at&t s6 edge+ using Odin. As soon as the process completed, my phone froze on Samsung screen. Then I tried wiping cache and data but nothing worked. I downloaded few stock ROM for Odin but flashing keeps on failing. I read in some thread that new Samsung devices do not support downgrading. I went and checked my current build number and found that to be G928AUCS4CPK1. However, the firmware I was trying to flash were older version.
Has anyone experienced similar issue before? The main problem here is I cannot find the exact build number anywhere. I spent a lot of time searching and finally decided to post here.
Your valuable suggestions will be greatly appreciated.
Thanks.
hey man, you flashed an older version of the firmware? even if it wasnt bricked, your phone is essentially useless now. the efs is gone, meaning you cant make phonecalls or connect to wifi at all. sorry; your phone is bricked. perm.
download mode dosen`t work ?if so the only thing you can try is to use samsung kies to restore your phone but don`t know if that works
I done something similar to my standard S6 Edge the only difference was i was able to start it up ok and i thought everything was ok until i realised i had no reception. I so happened to notice my imei number was gone. I had no back ups of the partition that saved this info so i totally bricked my phone.
I did however find a website that would be able to do a work around ( for a fee of course) for it however it does question your morals as its essentially illegal in alot of countries. I dont want to post anything on here so if you want any info send me a PM.
Exact same thing happened to me... went to AT&T repair center but they didn't have the 'K1' firmware..
anyhow managed to find the latest firmware (gsm-firmware.com)... cost me $4, but the phone is up and running... I only flashed the AP file.. also used Odin 3.12.5..
Hi. Been waiting a while to post this, and playing around based on what I see, but I the last change I made to my phone hasn't worked out too well and I don't think I have enough of a grip on the process. I am an ex-computer 3rd level tech support so I have reasonable skills around computers etc.
I bought an Axon 7 (A2017G) in Germany but it got flooded one day when it went down the toilet pan, literally. So I replaced it with a 128 Gb model from China, not really thinking about the software versions. Of course it came with A2017, and more importantly, no ability got OTA upgrades from Android 6.
So recently I've been having some battery life issues so I've changed the battery.
Following guides here, I've managed to get it onto a newer A2017 version and it has taken an OTA upgrade to Android 7. The build number is B13. The boot loader is still unlocked. But it's not very stable and Google Play service has now stopped, and I can't be doing with the unreliability. And tbh although it worked, I can't remember exactly which guide or what steps I followed to do it.
So I want to put it onto a stock G version, which I think seems to be possible, based on stuff I've read here. I don't think I need root going forwards (once this is done) and I'm looking for the simplest method. Unfortunately, due to the length of time it's been live, this forum really is information-overload and I've been reading for two days now and made loads of notes but I'm not really very clear about what I need to do.
I'm quite happy to find and read the right guides but would be really grateful if someone could take a few minutes to just tell me exactly which bits are essential to be upgraded and what steps I do need to follow. If I am confused I can come back with any queries.
I'd be happy to root the phone if it's felt that is a really useful thing but I'm not really a "power user" and I'm OK with standard.
Also I'm assuming any upgrade would receive any future Android releases OTA (if there are any for this phone), but if not that's not too vital.
Thanks in advance...
Geoff
But regarding your situation: You have an A2017 with A2017G firmware, right? Can you tell us your firmware version?
Would you be fine with Chinese firmware (MiFavor 5.2, B17) or prefer stock+ (G B01/B02, U B12)?
Thanks for the quick response, really appreciated.
The firmware is still A2017 version AFAIK, but I don't know where to check. If I go to the boot loader screen it says ZTE/P996A03_N/ailsa_ii and on the next line 7.1.1/NMF26V/20170912.013327
I'm thinking I'd do the change from A2017 to A2017G to get round the annoying junk which came with the Chinese version, and also avoid the Google Play Services problem I came across. It may not be do-able but I thought I'd read it was.
I guess in addition to telling me the steps, telling me exactly which file versions to use would help a lot. I promise to keep notes!
I don't mind which firmware, so long as it works reliably and so long as I can preferably put a G version on it.
of course it's doable, the thing is that you'll need to unlock the bootloader in order to.
If you had trouble with Play Services then it's most probably on chinese firmware, finding out would be as easy as going to Settings, then About phone
The boot loader is still unlocked from when I managed to do the previous upgrade. That took me quite some hours, and it was more by luck than judgement that I got a result. This time I want to better understand what I'm doing.
Not sure what I'm looking at for the firmware, isn't it the versions I quoted above? But the menus (mostly) are in Chinese at start up, and I had to load Google Play and Play Services from the ZTEYR store so I'm pretty sure it is on Chinese firmware.
So if it is, do I just need to upgrade the firmware then the ROM (is that the terminology?). If so which versions would I use?
Ta
Geoff
EDIT I missed the kernel version - which is 3.18.31
OK so I've spent more time reading. I'm coming to the conclusion that I don't need TWRP and I don't need to update my Chinese bootloader, does that sound about right?
Is it right that all I need to do is
- find a G firmware zip file <<< may have incorrect terminology here, would appreciate a pointer to a valid download as I have many but not sure they are the right type of file
- put it on an SD card named as update.zip
- boot into recovery mode
- choose "apply update from SD card"
And, assuming I have used a stock version, will it then update to the latest version (hopefully Oreo) once it's started?
Do I need to do any formats or wipes anywhere in the process? I already have a backup of my stuff, done with AXON7Toolkit.
And can you recommend a version of firmware to go to, or does it not really matter as it'll update itself anyway?
UPDATE: MiFavor UI is v5.0
OK, so there is no real short easy answer to this.
I've used the updates from ZTE since I've had the phone until I soft bricked it.
Zte offer updates similar to this.
Eg: B06 to B08 or B08 to B09 and B09 to B12
The update has to be done in stages.
Some updates you can copy to the internal SD card then go settings > system > update, your phone should detect the updates and tap install.
Some Zip files can be done the same way after changing the file name to update.zip or Ota.zip depending on the instructions.
Some zip files have the update within the Zip so it needs to be extracted.
Make sure you have the correct version software and correct version for your phone.
After the update is done all the data etc will be still in place unless you reset your phone.
All I can say is research, research, research.
Btw if your bootloader is unlocked some updates will fail.
I hope this helps
PS: you can use the method you described as well, just follow the instructions carefully.
In most cases there is no need to wipe or format unless you are using a custom ROM etc.
Excellent, thanks.
Going back a post or two - I re-installed Google Play services but still have problems. Before a reboot it appears in the list of apps, and Play opens, but the sidebar comes straight in and behind there is a message "Error while retrieving information from server [RH-01]" . After a reboot it is no longer in the list of Apps (even when expanded to include System apps), and Play just opens and closes real quick.
So I found a thread which led me look in Settings in Play Store at the Play Protect Certification, which says the device is not certified. So I downloaded the related app and ran it, which gave me a code which I put in web page then entered the stuff into my phone but still no joy. I suspect this is causing the Play problem and I think it'd be due to trying to use Google product on a Chinese firmware (again I'm not sure my terminology is right - I mean whatever the software is which throws up the initial boot screen).
So I think I need to get off the Chinese firmware at the same time as going to a G version, and I'm even less clear on how to replace the firmware than the rest of the process - what files and how it's done.
Going back to the more recent post (Syberclone), as I have already wiped my phone I'm not concerned about keeping data. I understand about doing this is steps - I hadn't thought of doing it that way but it seems very sensible.
I found a post by Raystef66 with loads of links to software - including A2017X_B15_Universal_Bootloader.zip. Does this replace the Chinese firmware and would it work with all zipfiles? How would I apply it? (I was using Axon7ToolKit the other day and that looks quite impressive).
I am still confused over the different types of files and the naming conventions but it's slowly making more sense. Appreciate all advice.
Thanks
Geoff
Personally I use Edl packages much easier imo.
I use Miflash or Edl tool by @djkuz
I have a bad flash help page that explains the process.
The bootstacks etc are mainly for custom ROMs, if you are just looking a factory firmware, Edl's are much easier to install without worrying about bootstacks, twrp etc.
My last Edl update was from Nougat (Chinese Rom)
To Oreo A2017G I had to factory reset after the install though.
Thatnks. Today I've done a fwe more hours reading, literally. This is taking all my time!!
Anyway I decided to follow your advice and found a full EDL of Oreo, which I applied. (ZTE_A2017V3.0.0B17) and the phone is still working, and I've not lost my apps.
However I still have the problem that Play Services won't run. I've upgraded it, followed a few troubleshooting guides, used different versions ( - should I be using the 64 bit one??) but still no joy. If I could only get that going I'd stick with the Chinese firmware. It is looking to me like it can't sync, though whether that's a cause or an outcome I'm not sure. Not unexpectedly, a number of apps will not run as a result.
I haven't done a factory reset yet, I thought I'd ask here first to see if that is likely to fix it or whether anyone has any better ideas.
Despite the time this is taking I'm enjoying learning and am grateful to you all for the responses.
The play store link "device not certified" will happen when you change a ROM from its original.
So I have an A2017G, when I run any other ROM it will show "device not certified" because the link between the phone and the software isnt in sync.
When I was running the beta Oreo from the Chinese my device always had this issue and NFC does not either usually.
There is a play store app version which will work as it should however the certified is still a problem without a work around.
When I installed the G version Oreo to my device the certification is back.
I'm miss some of the Chinese ROM animations tho.
Anyway I hope this helps
I am using an A2017 ROM on an A2017. I've not changed anything else. Maybe I need to update the boot stuff (firmware?).
What I'm seeing is that Play Services always needs to be manually enabled, and seems to drop out and require re-installation sometimes. So I have an apk on my internal memory for quick access.
I'm not sure that the "device not certified" is a cause or effect really.
So I have an apk on my internal memory for quick access. It's the latest non-beta 64bit version for Android 8 - should I try a specific one, e.g. is there likely to be a specific one which matches the ROM? (An older non 64 bit one seemed to give much the same problem)
I'd put up with the problem except I can't run some Google stuff at all (Play Store for instance), and some other stuff is compromised (e.g. I can't get into Waze on my usual ID, I'm guessing Play Services plays a part in authorizing). And I can't install some stuff I'd like.
And I'd still be interested to know which bits require upgrade to go to a G version, if it is do-able and would run trouble free.
There was a play store app that worked on most ROMs.
You are on Oreo now yes?
There was a link on one of the Android pie ROMs that I used, it worked fine.
If you are still having issues you can use an app called Yalp that works like the play store.
I've used it on custom ROMs when the play store app refuses to work.
Yes, Oreo now.
I've put YALP on and that looks pretty good. I now seem to have most things working, and those that aren't I can probably live without.
I use a network tool called FING which reports my phone details, and I think it's incorrect but it's saying in one place it's a A2017U which I don't think is right. But now I am more comfortable with EDL and stuff I'm going to continue to fix this properly but the urgency is now not there. I was thinking if I couldn't fix this I might have to buy a new phone on black Friday!! So thanks for your help.
I'm still not really quite sure why I get Chinese characters at start up and what files I need to change to out a G firmware on, if that is what is wrong, and if it's do-able. I think if I knew how to do that then I could put on a G firmware and matching ROM and I'd be in business!!
The same page offered me F-DROID which seems to offer a whole load of different free apps. Maybe they don't have ads? Anyway I'll have a look.
Anyway, again - thanks!!
Geoff
Geoff I'm glad I could help
I was running the Chinese Oreo on my phone and after selecting English in setting some parts of the ROM were still in Chinese, even some notifications.
I converted to the A2017G Oreo update when it was released.
I miss some of the features in the Chinese ROM tho.
So... without wishing to prolong this... your phone was Chinese (as mine was) and you are now running a Global version and all you upgraded was the ROM? And are you able to use the Play Store and you don't have any issues running apps I - and can you run, say, Google Maps?). Is your bootloader still unlocked and if so is the menu at boot time still in Chinese?
Or have you upgraded something other than the ROM?
I actually have an Axon 7 A2017G here in Australia.
I soft bricked it when I accidentally made a mistake flashing a ROM.
I searched for a suitable stock firmware but I could only flash the Chinese Oreo Beta. It had to be modified to run on my device until the Oreo package for my A2017G had been uploaded.
I've now running the proper software for this phone.
Thanks.
Another couple of hours and I have made a Major breakthrough! I went back over all my notes and checked what i'd done and one thing I hadn't remembered doing was setting the Pay Store to Autorun. So using the Mi-Assistant I have done this, and most of the stuff which wasn't working now is. I am still working on why OK Google won't work, but the list of things I might have to live without is now quite short!! The one major benefit is that my battery life seems to be greatly increased. Boot time is also much quicker which is a bonus but not critical.
Nice, yes battery life is improved, actually the Chinese Oreo Beta has a better battery life than my current Oreo.
I could get up to 4 days out of the Chinese ROM, my current ROM can manage just over 3 days at best.
I have battery saver mode on but not ultra battery saver.
I hope this has been a good learning experience for you?
"I hope this has been a good learning experience for you?"
For sure it has. Back in the days when I was 3rd level computer techie, the best learning came from other experts and from being thrown in the deep end, rather than what they taught you in the classroom!
Hello everyone,
I've flashed my phones for quite a few years, messed things up from time to time, but always found solutions. This time however, i don't really know where to start.
I kept my Zenfone Max Pro M1 in its original state for the time of warranty and only unlocked and flashed it a few months ago. I first got into problems with the storage (couldn't install apps) and in my attempt to fix it i kinda bricked my phone... i don't remember all the steps i took, but what ended up working was Qualcomm Flash Image Loader (QFIL) with an Image i found online.
After that i flashed Spark OS and later Superior OS (both clean flashes), but with both i'm having problems with the internet connection. I only get EDGE which is really slow (WiFi, phone calls and everything else works fine). Tried out all possibly APNs and swapped SIM-cards with a friend to rule that out.
I'm suspecting some file needed for UMTS and up (specifically for european networks?) has been overwritten, but i haven't been able to find anything (great job by Microsoft renaming their browser also to Edge, doesn't make the search easier).
I recall having similar problems back then and flashing a certain radio.img fixed it, but i don't find anything about that either. Maybe something else baseband related? Do you think Asus could help me out? What to ask for?
Grateful for any input
Update: realized my serialnumber is displayed as C4ATAS000000 which is not that uncommon and might be the culprit. haven't found a working solution yet, but working on it