Related
Hello everyone!
Okay, so I'll try to keep it as short as possible but with the most information I can give ofc.
So here's what I did with my Oneplus 2:
- unlocked bootloader
- flashed custom recovery (twrp)
- flashed superSU.zip
- flashed xposed.zip
- used it for about half a year if not even longer
everything on Lollipop 5.1 stock rom so xposed would work.
Everything was fine but some day when I wanted to enter twrp recovery it didn't work. (I swear, this is the most illogical thing ever but I DID NOT CHANGE A THING!)
I tried to enter recovery via fastboot but that didn't work either.
So I reflashed latest TWRP recovery.img for OP2 via fastboot.
When I pressed power + vol. down to see if it'd work nothing happened.
When I tried to enter recovery when my system was booted via power button->restart->recovery my phone got stuck in a bootloop.
I had to go in fastboot mode to enter "fastboot continue" in order to get my phone booting normal again.
Then, one night when my phone was in my pocket it vibrated and got stuck in the bootloop again, even though it was booted into system and locked last time I used it (minutes before that).
I had no access to a computer at that moment so I had to wait for a few days.
Now when I boot my phone in fastboot mode and try to enter "fastboot continue" on my cmd nothing happens with my phone and cmd says "(command write failed (Unknown error))" even though "fastboot devices" shows that my device is connected properly.
I also tried:
- the FirstAidKit, copied the Win Files in my fastboot directory and started the firstaid.bat but it stops on "fastboot flash boot boot.img" (I waited for like two hours).
- a different USB port (USB 3 and USB 2)
I am kinda depending on my phone so yeah..
If someone knows how to fix this I would be very grateful.
Have a good day/night
SoulSnatcher
Do you have a backup??
If yes, download the latest official OS from Oneplus and the stock recovery. Flash the stock recovery. Try rebooting into stock recovery. If it succeeds, wipe everything and flash OS via adb sideload.
Honestly, I can't guess what went wrong with your device. Maybe it could've been some app which crashed the entire system.
AJay27 said:
Flash the stock recovery.
Click to expand...
Click to collapse
Same problem as with the FirstAidKit:
"fastboot devices" does display the device but "fastboot flash recovery recovery.img" doesn't do anything (I waited for 1h just to make sure).
I'll try this Mega Unbrick Guide for A Hard Bricked OnePlus 2 next, even though I can get into fastboot but since it doesn't do s**t I'll have to give it a try. I mean, what's the worst thing that could happen? That my phone gets bricked?!
Haha.... hmm.
I'll keep the person(s) updated who care to know what's happening.
Cheers
fml
Okay, to start with, I've read the other threads about this. I understand the process that *should* work:
1. Power off.
2. Then, press and hold both all Volume Down + Power buttons at the same time until the LG Logo is being displayed on your LG V20.
3. Now, release the keys and press the above combination again however, this time you should wait until recovery mode menu is displayed.
...and I've tried the version where you keep holding the Volume Down button the entire time.
So, yes, I've reached the white screen where it asks you if you want to do a factory reset. I've hit "Yes" to both questions. The problem is that it really does a factory reset then.
---
After unlocking the bootloader, I installed TWRP via fastboot:
adb reboot bootloader
fastboot flash recovery twrp.img
fastboot reboot
...everything went fine.
But I can't get into recovery. And since I'm waiting to have TWRP working so that I can flash root, I can't boot into recovery via an app.
What did I do wrong?
EDIT:
Okay, it looks like TWRP isn't working properly. I tried "adb reboot recovery" and that got me to a dead Android icon and a "No command" message. I have no idea why TWRP isn't working.
Haphim said:
Okay, to start with, I've read the other threads about this. I understand the process that *should* work:
1. Power off.
2. Then, press and hold both all Volume Down + Power buttons at the same time until the LG Logo is being displayed on your LG V20.
3. Now, release the keys and press the above combination again however, this time you should wait until recovery mode menu is displayed.
...and I've tried the version where you keep holding the Volume Down button the entire time.
So, yes, I've reached the white screen where it asks you if you want to do a factory reset. I've hit "Yes" to both questions. The problem is that it really does a factory reset then.
---
After unlocking the bootloader, I installed TWRP via fastboot:
adb reboot bootloader
fastboot flash recovery twrp.img
fastboot reboot
...everything went fine.
But I can't get into recovery. And since I'm waiting to have TWRP working so that I can flash root, I can't boot into recovery via an app.
What did I do wrong?
EDIT:
Okay, it looks like TWRP isn't working properly. I tried "adb reboot recovery" and that got me to a dead Android icon and a "No command" message. I have no idea why TWRP isn't working.
Click to expand...
Click to collapse
to confirm, have you verified you are using the correct TWRP version for your V20?
in this step "fastboot flash recovery twrp.img" is your twrp image that you saved, named twrp.img? If its not, that command won't work correctly.
usually after I flash recovery, when still in the recovery menu, i choose reboot recovery just to make sure it did stick. If it reboots back to itself, then try rebooting the device, and again confirm with manually entering recovery. Maybe overkill but it works for me LOL.
Good luck!
I am in need of big help! I made a critical error after days of trying to navigate the minefields of rooting my device. I have a LG V20 h910 and it is no one-click wonder root. It made me work for it and I finally got it. I loaded LineageOS 14.1 and all was good until the USB OTG cable from my PS4 controller did not register anymore. Damn, that was a let down, and probably led to my careless move of needing to downgrade my TWRP, saw the version I needed, forgot these are device specific, and now I'm stuck in a hard place.
Perhaps the fix is easy, but I have not found the answer after many, many searches...
I had TWRP 3.2.1-2 and needed to downgrade to 3.2.1-0 to try SuperRom (hoping it would have OTG ability). I hastily grabbed the first TWRP 3.2.1-0, threw it on the SD card, wiped everything except internal storage, and flashed the img, and did a reboot. Road block went up.
I tried getting back into recovery, did the PWR and DOWN pressing combo and got the Factory Reset screen, but after clicking "Yes" to both, instead of getting the TWRP screen, I got this error screen (attached).
I tried another idea - hooked it up USB to my PC and tried accessing it via adb/fastboot. I tried multiple drivers for my device, but no adb and no fastboot devices were ever found. The only thing that almost worked was booting phone into FASTBOOT mode by holding DOWN btn and plugging in a USB cable attached to PC. Once in FASTBOOT mode, My PC at least saw the ID for fastboot device. I tried to flash TWRP via fastboot, and it looked like it would happen, but in the end there was no phone screen response to my attempt, and the cmd window on my PC would get stuck and just hang.
Can someone please advise me on how I can fix this problem?
I think I messed up my PH-1 something royally.
All I was trying to do is unlock my bootloader and load Magisk.
To preface this, my PH-1 seemed to act a little wonky from the get-go. I bought it 3rd person from a guy on craigslist so anything warranty involved I think I'm out of luck.
The phone would take a while to power on, it took something like 10secs on the power button just to turn it on. And if I set it to reboot , it boots into the bootloader. Also, I was never able to access the recovery (even using power + up). It always felt like I had to hold the buttons for way to long to get to its destination; e.g. up and power to get into fastboot.
Ok where I'm at now. In can occasionally get into fastboot mostly after it bootlooping a few times. It won't get past the Essential logo if I try to boot it up.
PS I was able to unlock the bootloader.
Steps I took to remedy this:
> erase all user data in fastboot
> hold power + u + d to hard power off
> follow this guide https://forum.xda-developers.com/essential-phone/how-to/guide-rooting-essential-ph-1-magisk-t3701976
> attempt to install stock system image via flash-all
>a ton other
Here are the results of that.
https://imgur.com/a/iVwwS
Help me guys please. :crying:
A little progress, I was unable to unlock_critical but its still hanging here
https://imgur.com/a/IdZum
jAm-0 said:
I think I messed up my PH-1 something royally.
All I was trying to do is unlock my bootloader and load Magisk.
To preface this, my PH-1 seemed to act a little wonky from the get-go. I bought it 3rd person from a guy on craigslist so anything warranty involved I think I'm out of luck.
The phone would take a while to power on, it took something like 10secs on the power button just to turn it on. And if I set it to reboot , it boots into the bootloader. Also, I was never able to access the recovery (even using power + up). It always felt like I had to hold the buttons for way to long to get to its destination; e.g. up and power to get into fastboot.
Ok where I'm at now. In can occasionally get into fastboot mostly after it bootlooping a few times. It won't get past the Essential logo if I try to boot it up.
PS I was able to unlock the bootloader.
Steps I took to remedy this:
> erase all user data in fastboot
> hold power + u + d to hard power off
> follow this guide https://forum.xda-developers.com/essential-phone/how-to/guide-rooting-essential-ph-1-magisk-t3701976
> attempt to install stock system image via flash-all
>a ton other
Here are the results of that.
https://imgur.com/a/iVwwS
Help me guys please. :crying:
Click to expand...
Click to collapse
read through this and follow the steps should be good to go.
https://forum.xda-developers.com/essential-phone/development/stock-7-1-1-nmj20d-t3701681
This is also very helpful
https://mata.readthedocs.io/en/latest/
That's the exact process I was going through, and it finally booted up.
The issue I was having was a bad usb connection which wouldn't allow me to unlock_critical.
SOLVED. Still no Magisk, we'll worry about that another time. 5hrs of troubleshooting is enough for one night.
https://imgur.com/a/ZiBzp
SO close to getting Magisk to install, any reason the refuses to flash the boot partition? I used the stock boot.img and had Magisk patch it before I flashed
SO close to getting Magisk to install, any reason the refuses to flash the boot partition? I used the stock boot.img and had Magisk patch it before I flashed
jAm-0 said:
SO close to getting Magisk to install, any reason the refuses to flash the boot partition? I used the stock boot.img and had Magisk patch it before I flashed
Click to expand...
Click to collapse
You have to flash magisk in twrp recovery NOT bootloader mode.
It's right in the OP from the rooting guide you followed:
Do not set up a password if you are on 8.1 twrp doesn't work.
You need to read through that rooting guide and make sure you know what you're doing before you try.
This phone is easy to hard brick and there is no solution to recover from that.
OREO 8.0/8.1
REQUIREMENTS:
An unlocked bootloader.
A working ADB/Fastboot environment on your computer. Knowledge on how ADB and Fastboot works is also preferred.
The stock boot image for whatever build you're running/trying to root.
The latest TWRP build for our device.
If on 8.1, remove your pin/pattern/passcode until the root process is done.
1. Download both the stock boot image for whatever build you're running and the Magisk or SuperSU zip. Transfer both files to your device's internal storage.
2. Reboot your phone into the bootloader, then open up your command prompt or terminal and flash the latest TWRP build for the device using:
Code:
fastboot flash boot twrp.img
3. Once TWRP has finished flashing, reboot into your recovery. When prompted, enter your pattern/passcode/password to decrypt your data in order to gain access to your internal storage.
4. Once you're in TWRP, install the stock boot image and then the Magisk/SuperSU zip.
5. Whenever Magisk/SuperSU finishes installing, simply reboot your device! You should now be rooted.
*NOTE: TWRP will NOT remain installed on your device.
wolfu11 said:
You have to flash magisk in twrp recovery NOT bootloader mode.
It's right in the OP from the rooting guide you followed:
Do not set up a password if you are on 8.1 twrp doesn't work.
You need to read through that rooting guide and make sure you know what you're doing before you try.
This phone is easy to hard brick and there is no solution to recover from that.
OREO 8.0/8.1
REQUIREMENTS:
An unlocked bootloader.
A working ADB/Fastboot environment on your computer. Knowledge on how ADB and Fastboot works is also preferred.
The stock boot image for whatever build you're running/trying to root.
The latest TWRP build for our device.
If on 8.1, remove your pin/pattern/passcode until the root process is done.
1. Download both the stock boot image for whatever build you're running and the Magisk or SuperSU zip. Transfer both files to your device's internal storage.
2. Reboot your phone into the bootloader, then open up your command prompt or terminal and flash the latest TWRP build for the device using:
Code:
fastboot flash boot twrp.img
3. Once TWRP has finished flashing, reboot into your recovery. When prompted, enter your pattern/passcode/password to decrypt your data in order to gain access to your internal storage.
4. Once you're in TWRP, install the stock boot image and then the Magisk/SuperSU zip.
5. Whenever Magisk/SuperSU finishes installing, simply reboot your device! You should now be rooted.
*NOTE: TWRP will NOT remain installed on your device.
Click to expand...
Click to collapse
I realize all that, the issue is I cannot access any sort of recovery because I think my bootloader is defective.
For example from a cold restart if I press the power button for say 3 -5 seconds it wont boot, just boot to the Essential logo and loop. To get the phone to boot I have to hold the power down for 15-20 seconds while it bootloops a couple times then it'll boot.
Is there a possible way to reflash the bootloader software if it is defective? It's unlocked btw
There is a way to install magisk via fastboot with a patched_boot img which I'm working on. Cant seem to find the right boot img to patch for 8.1
PS Is it possible to flash .zips through fastboot? e.g. custom roms etc
Was finally able to get into recovery, so all is well. Thanks for the help yall
OP, what was your process to successfully get into recovery and fix your problems?
It may help others sometime?
gimpy1 said:
OP, what was your process to successfully get into recovery and fix your problems?
It may help others sometime?
Click to expand...
Click to collapse
It's really hard to say, my phone has a serious problem with it. sometimes I cant get it to boot, it will boot into the bootloader over and over and over. I've managed to get Lineage 15.1 on if for a bit until I tried to get back into the recovery which sent it manic.
I just got lucky I was able to get into TWRP and flash lineage.
my first issue not being able to flash the stock image via fastboot because I didn't unlock_critical which can sometimes fail when the usb connection is bad.
Currently flashing stock again if my phone will boot up. I'm not sure whats wrong with my bootloader but its causing a ton of havoc
My essential phone stuck in boot logo,bootloader work but recovery doesn´t work
Bootloader locked.
Oem unlocking disable.
Usb debugging disable.
How to flash stock recovery or twrp on bootloader locked ? please
Thank you!
katastyle971 said:
My essential phone stuck in boot logo,bootloader work but recovery doesn´t work
Bootloader locked.
Oem unlocking disable.
Usb debugging disable.
How to flash stock recovery or twrp on bootloader locked ? please
Thank you!
Click to expand...
Click to collapse
Same boat for me - just keep rebooting to show Powered by Android Screen and then reboot again and again. Was able to see my device using fastboot devices command but all attempts to access recory just repeat the bootloop entry. I would happily check the OEM UNLOCK option in dev settings but can't even get it to book to any OS to make that option happen. Still shows bootloader locked on bootloader screen - any help someone can suggest?
I had this problem tonight also. In my case I suspect it had to do with the install of magisk in which I checked both boxes and patched the bootloader. on reboot I was stuck on boot. Just wanted to add my solution. I got the pie back to stock zip here https://forum.xda-developers.com/essential-phone/development/stock-7-1-1-nmj20d-t3701681 then I put it into the adb folder and ran the flashall.bat script. I tried the no wipe one and it saved my information. very happy I didnt have to resetup my phone in the end.
katastyle971 said:
My essential phone stuck in boot logo,bootloader work but recovery doesn´t work
Bootloader locked.
Oem unlocking disable.
Usb debugging disable.
How to flash stock recovery or twrp on bootloader locked ? please
Thank you!
Click to expand...
Click to collapse
I am in the same boat. I tried to re-install the OS, but because my USB debugging was not enabled, Fastboot worked but ADB would not and since I basically wiped the recovery area, my phone will only boot into Fastboot but will not allow any loading of recovery. I would pay for someone to help. This is so hard to figure out. I have contacted Essential but since my phone is over 12 months old, the warranty has expired.
Help please. It seems like such a waste to have a bricked phone.
I decided to update my old oneplus 2 to lineageos 15.1 with, but when I tried to flash the file with TWRP, it shows an error. Since the TWRP version I was using was old, I decided to update it first. Keep in mind at this point i had completely wiped my device. So, I downloaded the "twrp-3.2.1-0-kenzo.img" file, as per a youtube video where the dude managed to flash the update successfully, and gave it a go. It showed up as successful. Then i shut the whole device off, and tried to boot back in to recovery to flash the ROM again, but the thing won't boot. It's stuck on this boot screen (with the oneplus logo and 'powered by android' at the bottom), and refuses to go further. I'm stuck in a situation with the phone having no OS, no recovery and the thing won't show up when I connect it to the pc either. Well, the pc makes the 'device connected' notification sound when I plug it in, but nothing shows up on the file explorer or the device manager.
That's my dilemma, please i need help!
Thanks in advance.
inwarse said:
I decided to update my old oneplus 2 to lineageos 15.1 with, but when I tried to flash the file with TWRP, it shows an error. Since the TWRP version I was using was old, I decided to update it first. Keep in mind at this point i had completely wiped my device. So, I downloaded the "twrp-3.2.1-0-kenzo.img" file, as per a youtube video where the dude managed to flash the update successfully, and gave it a go. It showed up as successful. Then i shut the whole device off, and tried to boot back in to recovery to flash the ROM again, but the thing won't boot. It's stuck on this boot screen (with the oneplus logo and 'powered by android' at the bottom), and refuses to go further. I'm stuck in a situation with the phone having no OS, no recovery and the thing won't show up when I connect it to the pc either. Well, the pc makes the 'device connected' notification sound when I plug it in, but nothing shows up on the file explorer or the device manager.
That's my dilemma, please i need help!
Thanks in advance.
Click to expand...
Click to collapse
You downloaded the KENZO (this is not oneplus2! ) TWRP and flashed it on another phone (oneplus2), just normal that it doesn't work and your phone is messed up.
If you can enter fastboot (vol up and power button to boot) you can rescue your phone:
-enter fastboot (vol up + power, while phone is completely off, u can also hold it until you can see "fastboot" written on the screen)
-connect device to a computer with fastboot installed
-type "fastboot oem unlock" into a terminal/cmd window if there is no error, you are good to go, otherwise your bootloader relocked, use this thread to recover
-if your bootloader is still unlocked, download the ONEPLUS2 TWRP IMG, ALWAYS make sure to only flash the roms, kernels, recoveries or zips for YOUR phone otherwise you can really DESTROY your phone!
-now type into terminal/cmd: "fastboot flash recovery *drag the oneplus2 twrp image into terminal/cmd window* and hit enter
-use vol down + power to reboot phone into recovery and wipe all partitions
-Install a ONEPLUS2 ROM of your choice
If something is not clear, use google, because this is most likely basic stuff you have to know when flashing your phone
I can in fact go to fastboot mode by holding the power+volume up keys. When I the phone to my pc it does show a fastboot device (9597b869 fastboot). What do i do from here?
inwarse said:
I can in fact go to fastboot mode by holding the power+volume up keys. When I the phone to my pc it does show a fastboot device (9597b869 fastboot). What do i do from here?
Click to expand...
Click to collapse
As I wrote above (it's a step-by-step guide, u only have to READ )
-connect device to a computer with fastboot installed
-type "fastboot oem unlock" into a terminal/cmd window if there is no error, you are good to go, otherwise your bootloader relocked, use this thread to recover
-if your bootloader is still unlocked, download the ONEPLUS2 TWRP IMG, ALWAYS make sure to only flash the roms, kernels, recoveries or zips for YOUR phone otherwise you can really DESTROY your phone!
-now type into terminal/cmd: "fastboot flash recovery *drag the oneplus2 twrp image into terminal/cmd window* and hit enter
-use vol down + power to reboot phone into recovery and wipe all partitions
-Install a ONEPLUS2 ROM of your choice
wertus33333 said:
As I wrote above (it's a step-by-step guide, u only have to READ )
-connect device to a computer with fastboot installed
-type "fastboot oem unlock" into a terminal/cmd window if there is no error, you are good to go, otherwise your bootloader relocked, use this thread to recover
-if your bootloader is still unlocked, download the ONEPLUS2 TWRP IMG, ALWAYS make sure to only flash the roms, kernels, recoveries or zips for YOUR phone otherwise you can really DESTROY your phone!
-now type into terminal/cmd: "fastboot flash recovery *drag the oneplus2 twrp image into terminal/cmd window* and hit enter
-use vol down + power to reboot phone into recovery and wipe all partitions
-Install a ONEPLUS2 ROM of your choice
Click to expand...
Click to collapse
i tried to follow the guide. but the bootloader, as per you description is relocked. the download link for the driver you provided shows up as empty/no longer available. that's where i'm getting stuck.
P.S, i can enter fastboot mode on the phone via power+volume up.
thanks for the help so far, i can't seem to find much help other than from you so far
Oh, the link is dead, sry for that. try this one (GDrive links are up and working).
inwarse said:
i tried to follow the guide. but the bootloader, as per you description is relocked. the download link for the driver you provided shows up as empty/no longer available. that's where i'm getting stuck.
P.S, i can enter fastboot mode on the phone via power+volume up.
thanks for the help so far, i can't seem to find much help other than from you so far
Click to expand...
Click to collapse
so i managed to get into qualcomm mode, updated the drivers, and ran "MSM8994DownloadTool.exe" in administrator mode. it went as it's outlined in your guide. however, at the end of that process, the phone got stuck in a bootloop (the oneplus logo flashes for a moment and restarts). and can't get into qualcomm mode now, since when i connect the usb to the pc while the phone off, it lights the display (to show that it's charging, i think). any way back from this?
(i can still get into fastboot mode)
inwarse said:
so i managed to get into qualcomm mode, updated the drivers, and ran "MSM8994DownloadTool.exe" in administrator mode. it went as it's outlined in your guide. however, at the end of that process, the phone got stuck in a bootloop (the oneplus logo flashes for a moment and restarts). and can't get into qualcomm mode now, since when i connect the usb to the pc while the phone off, it lights the display (to show that it's charging, i think). any way back from this?
(i can still get into fastboot mode)
Click to expand...
Click to collapse
Do you still have TWRP? If yes go to TWRP and shut down the phone there, afterwards you should be able to enter qualcomm mode again.
otherwise you have to try (i think 10s power button will shut the device completely down). You should be able to enter qualcomm mode if the device is fully shut off (your scenario sounds as if the device is not fully shut off when u connect it to the pc).
Just to go sure: You are absolutely sure to have a oneplus2, are you?
inwarse said:
so i managed to get into qualcomm mode, updated the drivers, and ran "MSM8994DownloadTool.exe" in administrator mode. it went as it's outlined in your guide. however, at the end of that process, the phone got stuck in a bootloop (the oneplus logo flashes for a moment and restarts). and can't get into qualcomm mode now, since when i connect the usb to the pc while the phone off, it lights the display (to show that it's charging, i think). any way back from this?
(i can still get into fastboot mode)
Click to expand...
Click to collapse
Could you resolve the issue?
wertus33333 said:
Could you resolve the issue?
Click to expand...
Click to collapse
nope. kept running into issue after issue, so got dejected and gave up.
No matter what I do my phone is just stuck on fastboot no matter what button I press it will go back to fastboot in seconds. *what I did that made it happen... I tried to backup my phone with twrp and it didn't work and when I pressed on reboot I accidentally pressed on something that has an A or B in it's name (i forgot). then i rebooted and it just started to bootload in twrp. I tried to go to fastboot and after that for some odd reason it just kept bootload in fastboot. (Im sorry that I explained it like a mess but I don't really know what happend and I'm really bad at this phone stuff). Please
AlmogL1 said:
No matter what I do my phone is just stuck on fastboot no matter what button I press it will go back to fastboot in seconds. *what I did that made it happen... I tried to backup my phone with twrp and it didn't work and when I pressed on reboot I accidentally pressed on something that has an A or B in it's name (i forgot). then i rebooted and it just started to bootload in twrp. I tried to go to fastboot and after that for some odd reason it just kept bootload in fastboot. (Im sorry that I explained it like a mess but I don't really know what happend and I'm really bad at this phone stuff). Please
Click to expand...
Click to collapse
When in fastboot go down with volume up to you see recovery that should boot to twrp then if your in slot a press reboot to slot b or the other way round that should fix
jaythenut said:
When in fastboot go down with volume up to you see recovery that should boot to twrp then if your in slot a press reboot to slot b or the other way round that should fix
Click to expand...
Click to collapse
The problem is that even when I do that it keeps booting to fastboot no matter which option I pick.
Flash a TWRP, flash a rom from oneplus site via adb sideload, make a reboot, after will show the recovery, make a factory reset and you will have a phone
If you want a magisk only you can flash the patched boot img.