Im posting it here bcuz i cant find my phone model btw my phine is samsung j7+ (c710f) i tried may tuts how to root j7+ and am always stuck installing twrp. In odin it says pass but when i tried to go in recovery mode for the first time i always got this messsge (warranty bit recovery (0) ) on the top of the screen and my phone restart and load fine and when i try to go back in recovery this will show
No command
This it boot into normal rexovery
Failed to recovery cause no such file or directory
I try to root my phone
Related
Okay first post on this website.
4.4.2, i9505
So, as i am a compete android n00b, i rooted my s4 with the KingoRoot tool as i thought it was an easy method, later i found out ChainFire made an easy auto root .
After i rooted with the kingo my device would randomly reboot, when i called someone, when i locked my phone and random stages throughout the day.
After some reading online i found the solution was to re-flash my phone to stock fireware. so i downloaded odin, drivers, fireware from sam and tried to re-flash it. however my phone failed after aboot.mbn. I then got the unexpected error saying the phone had to be plugged into kies etc.
I then used "philz_touch_6.07.9-i9300.tar.md5" to get rid of the error message which worked. however the phone still would radnomly restart.
Again i turnrf to the web to find a solution for the radnom booting and found this -
http://forum.xda-developers.com/showthread.php?t=2514703
telling me to delete everythinhg knox basically. after deleting everything outlined my phone is now stuck on the samsung logo.
i cannot access recovery mode! however can access download mode. but i have tried multiple times to re-flash to stock firmware to no avail...
Help, please
Recap
- Stuck on samsung logo
- Cant access recovery mode
- Can access download mode
- Deleted everything knox as specified
Thanks, Dylan
1. The error that give u ODIN is coz you are trying to flash an older firmware that the one you have installed in your device.
2. You have to flash a STOCK recovery. Flash this file via ODIN in PDA/AP (like in the pic 1 attached): HERE.
3. Turn off your device manually when the process finish. Boot it into STOCK RECOVERY by pressing and holding Volume Up, Home and Power.
4. Take a look the CSC (pic 2). "Applied the CSC-code: ............" <- This is your REAL CSC. Turn off your device again manually and boot it into DOWNLOAD MODE by pressing and holding Volume Down, Home and Power.
5. Go to Sammobile and download the LATEST firmware for your device with correct CSC and flash it via ODIN.
6. About KNOX and reboots: Delete all KNOX reminds less "Lib = libknox_encryption.so".
7. Good luck
Today i was trying to install the Android Marshmallow 6.0.1 on my Galaxy S5 Snapdragon via Odin, i downloaded the firmware from Sammobile, i verified that the phone model was exactly the same as named on the firmware, i place the .md5 file in the AP slot and everything was ready to go! (The phone was already plugged and in Bootloader mode, and drivers were up to date) then when finishing the flash Odin FAILS to complete the flash and the phone is left with nothing than the Download mode, i panic and try to access recovery mode but realize that there´s no recovery....I proceed to install the recovery.tar into my phone and it works, i start the phone and Samsung logo comes up, finally it loads and does al the process after you flash a Samsung phone.
Everything works just fine!...except for one thing, THERE´S NO RECOVERY!!!. The phone works perfectly but when i try to enter recovery mode, it sends me to Odin mode as it displays a message saying that failed to boot into recovery.
Please help me i don´t know what to do.
Thanks!
Just flash a custom recovery like twrp or cwm
Already did...same problem, recovery won't boot
adavicco said:
Already did...same problem, recovery won't boot
Click to expand...
Click to collapse
You need to flash a pit file to complete the install correctly.
Hi, I've just recently switched over from iphone to android so I'm still new to the whole system. Anyway I've been trying to root my phone for the past 2 days to no avail so I'm at my wits end here. Before I start my phone is from korea which I don't know if whether or not impacts its ability to be rooted, I've done all the basics like enable USB debugging from dev mode, install samsung usb drivers, open ODIN in admin mode and allow MTP to computer. My Device details are below:
>Baseband version : G906SKSU1CPF1
>KERNEL : 3.10.40-8533426
>BUILD NUMBER : MMB29M.G906SKSU1CPF3
So anyway I first tried flashing using CF autoroot for sm-G906S with odin which while it said it was passed and was successful on pc it would be stuck on the samsung logo with a message at the top left that said :
>Recovery booting
>Recovery is not seandroid enforcing
>set warranty bit recovery
So then I tried flashing TWRP custom recovery and putting Super user zip in the internal storage which although got my phone back to working order still wouldnt let me root as the process required me to go to recovery mode from the fastboot mode after it was done flashing (I tried both with and without autoreboot), however once the flashing was done on fastboot I couldn't get to recovery mode no matter how long I held the Vol up/power/home button combination and when i tried it after rebooting it would show normal recovery mode hence there was no way to install the Super User. (Also attempted this with phils recovery)
I then tried to do the TWRP method using adb with command prompt however it would get stuck saying waiting for device when i tried to flash and needless to say kingroot also failed.
At this point as far I've gone through all the methods I could find for my particular device. Would greatly appreciate any insight or advice regarding this problem.
Thanks
start reading from here http://forum.xda-developers.com/gal...ner-thread-t2807639/post68725608#post68725608
Hi,
I recently got me a Galaxy S5 (SM-G900F) and the first thing i wanted to do was installing CM13 as I always do with my new phones. However, when i followed te steps on CM wiki using Heimdall to flash TWRP the blue bar of the downlaod mode increases a small bit, then stops and in the command promt it says something about error with finding PIT. After trying this for three times i decided to go with Odin, which I do prefer anyways.
I tried flashing TWRP , the blue bar is filling to 100% but then on the little screen where Odin usually states FAIL! or PASS! it just says RESET! and my phone is restarting. Shortly after it restarded you can see the RESET! turning to PASS!, but when I tried checking in TWRP is installed, it wasn't. I tried it again and then Odin suddenly says FAIL! After restarting my phone it says "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again". I couldnt even enter download mode anymore till I tried if getting out the battery would work. I could enter download mode again and flashed the same TWRP on my phone again, and aigain it says RESET! but after that my phone worked again. I tried flashing with another version of Odin and TWRP but same thing happened - First run it said RESET!, second run FAIL!.
I thought maybe rooting the device and installing TWRP via their app afterwards could do the trick. So i tried flashing Autoroot with Odin but it made my phone showing a screen with Samsung logo and in the upper left corner something about recovery mode, seemed to be a loop/freeze. So i took out the battery again and flashed TWRP and that solved the problem again. At last I tried rooting by using TowelRoot but it says the service is not available for my device, even though S5 is listed as a supported device.
I really have no idea what to do anymore, would be very grateful if someone could come up with a solution.
BTW: Is it possible to flash CM13 without using custom recovery by using stock recovery?
Greetings
Khalitas
Khalitas said:
Hi,
I recently got me a Galaxy S5 (SM-G900F) and the first thing i wanted to do was installing CM13 as I always do with my new phones. However, when i followed te steps on CM wiki using Heimdall to flash TWRP the blue bar of the downlaod mode increases a small bit, then stops and in the command promt it says something about error with finding PIT. After trying this for three times i decided to go with Odin, which I do prefer anyways.
I tried flashing TWRP , the blue bar is filling to 100% but then on the little screen where Odin usually states FAIL! or PASS! it just says RESET! and my phone is restarting. Shortly after it restarded you can see the RESET! turning to PASS!, but when I tried checking in TWRP is installed, it wasn't. I tried it again and then Odin suddenly says FAIL! After restarting my phone it says "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again". I couldnt even enter download mode anymore till I tried if getting out the battery would work. I could enter download mode again and flashed the same TWRP on my phone again, and aigain it says RESET! but after that my phone worked again. I tried flashing with another version of Odin and TWRP but same thing happened - First run it said RESET!, second run FAIL!.
I thought maybe rooting the device and installing TWRP via their app afterwards could do the trick. So i tried flashing Autoroot with Odin but it made my phone showing a screen with Samsung logo and in the upper left corner something about recovery mode, seemed to be a loop/freeze. So i took out the battery again and flashed TWRP and that solved the problem again. At last I tried rooting by using TowelRoot but it says the service is not available for my device, even though S5 is listed as a supported device.
I really have no idea what to do anymore, would be very grateful if someone could come up with a solution.
BTW: Is it possible to flash CM13 without using custom recovery by using stock recovery?
Greetings
Khalitas
Click to expand...
Click to collapse
RESET! is basically the same thing as PASS! What version of TWRP are you installing? The keis screen you got is the same as download mode. Why are you using heimdal? your idea to go with Odin was a good one. Anyways, download TWRP 3.0.2 (not 3.0.2-1 or 3.0.2-2 as they are buggy) and flash it in Odin, reboot to recovery and install the ROM you like, of course following its specific install instructions. No, you cant install a custom rom with stock recovery
Thanks for your answer, meanwhile i managed to fix this problem. Had to flash the latest Firmware because twrp (could just install the oldest version otherwise I had no option to boot into recovery at all) said no OS installed. After rooting via Odin worked like it's supposed to.
Why did I use Heimdall? Because I wanted to stick to CM-wikis instruction and they used Heimdall.
I tried rooting with the Odin tool and used twrp-3.5.2_9-0-a40. After the phone rebooted it got stuck in a downloading do not turn off target loop. The specified error is Recovery: Error validating footer. (6) CUSTOM RECOVERY VBMETAA405FNXXU3UF2. 40954213R. Due to this error i cant boot into recovery tools and i really dont know what to do right now. If some tech wizard would guide me the right way, ill promise ill never try to root my phone again lol.
I'm late but did you unlock the bootloader ?