Hello guys,
So this Zenfone 5 T00J recently had its software bricked and it's on a bootloop. My main problem is that the volume up key is broken so I cannot access bootloader mode.
Is there any way to reboot to bootloader using the bootlooped device or using cloverviewplus mode?
Thanks in advance
just buy that button
AFN said:
Hello guys,
So this Zenfone 5 T00J recently had its software bricked and it's on a bootloop. My main problem is that the volume up key is broken so I cannot access bootloader mode.
Is there any way to reboot to bootloader using the bootlooped device or using cloverviewplus mode?
Thanks in advance
Click to expand...
Click to collapse
just buy that button.. it's super cheap ($0.69 or Rp. 9000)
or you can jumper volume up button using tweezers or other metal at volume up button (if button caps are gone)
AFN said:
Hello guys,
So this Zenfone 5 T00J recently had its software bricked and it's on a bootloop. My main problem is that the volume up key is broken so I cannot access bootloader mode.
Is there any way to reboot to bootloader using the bootlooped device or using cloverviewplus mode?
Thanks in advance
Click to expand...
Click to collapse
Plug into computer and use ADB: "adb reboot bootloader"
Related
Hello, i have a strange problem with my nexus 7 3g, when i try to enter bootloader using the key combo its not working. It enters a state where its asking for apx drivers, can't charge and boot to system and i have to hold power button to reset it.
When i boot normal its working fine , i can reboot to bootloader from rom but the combo its not working.
Anyone could help me? Thanks
I accidently wiped Internal storage completely using TWRP now my tablet showing OS not installed and stuck at GOOGLE logo screen .. How to get in to recovery mode from this stucked screen ? ;(
Hello,
I have completely wiped my device the same way as you did and I did not brick mine so you should be okay. See if the following helps:
1. Hold down the power until it turns off.
2. While holding down the volume down, turn the device on which should take u to your device loader
3. Push down until u see recovery
4. Press the power button and u should be twrp.
If you can get the tablet into fastboot you will be alright. Reboot the holding the volume down button, then reflash the stock image.
ADB interface error
barakisbrown said:
Hello,
I have completely wiped my device the same way as you did and I did not brick mine so you should be okay. See if the following helps:
1. Hold down the power until it turns off.
2. While holding down the volume down, turn the device on which should take u to your device loader
3. Push down until u see recovery
4. Press the power button and u should be twrp.
Click to expand...
Click to collapse
Thank you for the Reply
Nexus 7 32G Wifi
abhilashzenfone said:
Thank you for the Reply
Click to expand...
Click to collapse
I have the same problem with my Nexus 7 2012 version. I can get into TWRP but I can't get it to recognize my USB stick where I have an image of the latest android OS for the Nexus 7 2012 32G version. My bootloader is locked. I accidentaly erased it. Dont even remember if I had usb debugging on or off? It does power up and charge properly, and yes I am using an OTG USB adapter cable.....Help...
Pumping, because I have the same problem as va7lfd
Hi guys, I'm from Brazil and I have a problem with my nexus.
For mistake, I made a flash on a Moto X2's Bootloader, is possible I make a Hard Reset or Flash Stock Android?
I Can't enter in Bootloader using Volume Down + Power...
Detail: It's without back cover
HueBR Inc said:
Hi guys, I'm from Brazil and I have a problem with my nexus.
For mistake, I made a flash on a Moto X2's Bootloader, is possible I make a Hard Reset or Flash Stock Android?
I Can't enter in Bootloader using Volume Down + Power...
Detail: It's without back cover
Click to expand...
Click to collapse
Try this, see if it may help. What happens when you boot your device, or when you go to bootloader?
http://forum.xda-developers.com/nexus-4/general/nexus-4-bootloader-collection-t2105983
You can flash stock android but you would have to go to bootloader and flash stock image available from:
https://developers.google.com/android/nexus/images#occam
HueBR Inc said:
Hi guys, I'm from Brazil and I have a problem with my nexus.
For mistake, I made a flash on a Moto X2's Bootloader, is possible I make a Hard Reset or Flash Stock Android?
I Can't enter in Bootloader using Volume Down + Power...
Detail: It's without back cover
Click to expand...
Click to collapse
Are you sure about your buttons is working? (I'm saying it because my volume buttons broken and I didn't noted it, thought was a rom problem and was trying to go to the bootloader).
Also you can try to recognize it in adb or fastboot and boot into a recovery mode or bootloader.
LoveSick55 said:
Are you sure about your buttons is working? (I'm saying it because my volume buttons broken and I didn't noted it, thought was a rom problem and was trying to go to the bootloader).
Also you can try to recognize it in adb or fastboot and boot into a recovery mode or bootloader.
Click to expand...
Click to collapse
Hou Can I Try to recognize it in adb or fastbook?
It is with TWRP
Connect the phone to a win7 computer. Does a device appear in device manager with the qhusb_bulk or something like that? If it does, the phone is hard bricked.
To get into fastboot, press volume up, volume down, and power button.
Hello everybody.
Clumsy idiot I am, I flashed the wrong .img through Flashify and now my phone is bricked. Here's all I know:
All I see is a boot loop, phone turns on (with bootleg and vibration) for a second, then off, on again and so on.
- TWRP installed, but not reachable.
- ADB not working.
- QFIL not recognising the phone (drivers installed).
- I have no logs to post.
- No way to operate Volume/Power combinations because the time the phone reboots is less than a second.
What can I do to save it?
Take it to service center they dont even know what happan and repair or replace your phone as my expiriance same done on my old infocus m2
Keep pressing volume up + volume down and power button so u can enter twrp...
Or
Switch it off completely and press volume up and connect it to pc to enter fastboor and flash stock rom using fastboot...
I think u can revive ur phone back as its booting means the bootloader is still present...try entering fastboot
Sent from my ZUK Z1 using Tapatalk
Use QPST and flash ZUI with that. I unbricked mine with that.
Kounjula Rahul said:
Keep pressing volume up + volume down and power button so u can enter twrp...
Or
Switch it off completely and press volume up and connect it to pc to enter fastboor and flash stock rom using fastboot...
I think u can revive ur phone back as its booting means the bootloader is still present...try entering fastboot
Sent from my ZUK Z1 using Tapatalk
Click to expand...
Click to collapse
All kinds of physical inputs and button combinations fail.
YoolaCro said:
Use QPST and flash ZUI with that. I unbricked mine with that.
Click to expand...
Click to collapse
QPST does not recognise the phone. Drivers installed and all set up al right, sadly.
Do as i say
i also did same mistake
tried to install twrp with flashify ...my phone too keeps on restarting every second..please help me guys..
if you got any solution to this means please help me
Did you solve the problem? Mine is having the same problem!
Please Help Me.....!!
SarthakSL said:
Did you solve the problem? Mine is having the same problem!
Click to expand...
Click to collapse
Did anyone find solution of it?
Because I accidently flashed one plus 1 twrp in zuk z1. Now device only shows zuk logo and after that complete black out. I also tried the solution of hardbricked( Volume up button) phone but can't fix this problem. I am not able to go to fastboot mode. Is my device is hardbricked or softbricked? Any one suggestion will be very helpful to me and thanks in advance.
---------- Post added at 06:48 PM ---------- Previous post was at 06:18 PM ----------
Giop114 said:
Hello everybody.
Clumsy idiot I am, I flashed the wrong .img through Flashify and now my phone is bricked. Here's all I know:
All I see is a boot loop, phone turns on (with bootleg and vibration) for a second, then off, on again and so on.
- TWRP installed, but not reachable.
- ADB not working.
- QFIL not recognising the phone (drivers installed).
- I have no logs to post.
- No way to operate Volume/Power combinations because the time the phone reboots is less than a second.
What can I do to save it?
Click to expand...
Click to collapse
You found solution?
if found please please give me
It seems there is a solution. Keep pressing the Vol+ Vol- and the Power Button until the phone switches off. The phone will reboot. This time when you press Power Button, it will not restart. Hope I helped you.
Refer this
https://forum.xda-developers.com/zuk-z1/general/qpst-method-how-to-unbrick-to-stock-t3506833
[SOLVED] I'm trying to install google camera without root and I need help getting my phone into fastboot mode. Whenever I press and hold the volume up button and the power button together, my phone just boots/starts up normally. I've tried this several times already and I just can't get into the fastboot mode. The power and volume buttons are working just fine in normal use.
I'm using the 3/32Gb ASUS_X00TD ZB602KL variant if that helps. A huge thanks to anyone who would be able to help me.
ar0201 said:
I'm trying to install google camera without root and I need help getting my phone into fastboot mode. Whenever I press and hold the volume up button and the power button together, my phone just boots/starts up normally. I've tried this several times already and I just can't get into the fastboot mode. The power and volume buttons are working just fine in normal use.
I'm using the 3/32Gb ASUS_X00TD ZB602KL variant if that helps. A huge thanks to anyone who would be able to help me.
Click to expand...
Click to collapse
Help
Asinghrawat4 said:
Help
Click to expand...
Click to collapse
Umm just keep the both buttons pressed until you see any screen don't release them on vibration. or try to reboot in fastboot using "adb reboot bootloader" .
Without the " ". Will do your thing.