I've bought a replacement lens cover for the rear camera on my V20. It came with self-adhesive, but the adhesive isn't good enough and it keeps falling off. I really don't want to use superglue to secure it. Can anyone recommend a good alternative which will keep it in place, but which won't be a pain in the neck if the lens cover gets smashed again and needs to be replaced?
Related
Has anyone else noticed that the recessed lens for the Aria camera attracts lint from your pocket, and you really can't easily clean that lint off without something like a Q-tip?
Seems like it'd be simple enough to have some kind of stick on film cover that you could clean externally without any tool such as a Q-tip. With lint in there, the camera is pretty much useless. With a clean lens, the camera works great.
Can anyone suggest a good solution to this problem?
I have noticed the exact same thing you are mentioning. I wish they would have done something better with the design but oh well! Don't have any good solutions but will monitor this thread to see what others do.
Rip the tip off a qtip and use it like that dry worked perfect for my camera
Sent from my Liberty using XDA App
I think the idea was probably to keep fingerprints off.. that part works perfectly. I just twist the corner of a kleenex/papertowel/napkin and stick it in there & turn it
Don't use a twisted napkin/etc... good way to get scratches. Now, I know our Aria isn't like a Nikon DSLR... but still, a scratched lense will kill any photos you take.
Get something like a lens pen or an air cleaning blower. They're fairly cheap, and can be used with multiple devices... not just your Aria!
Edit: Another item you can use - for all the guys out there with electric shavers - the little brushes that come with your shaver to clean the heads/etc can also be used to clean out the camera for the Aria. (I noticed one on my desk and wanted to add to this.)
Duplicate post........
Put black tape over the cam grill and pull off when using the camera. Like a manual shutter haha.
Sent from my Liberty using XDA App
OK obviously you can just clean it by jamming something in there or carry around a lens cleaning pen or whatever, that's not the point. The point is to come up with a solution that is not such a pain to clean it. My wife & daughter both have iPhones and they just take them out of their pocket and shoot a picture. If I'm going to have to clean the danged lens with a q-tip or a lens cleaning cloth or whatever EVERY TIME I USE IT then the camera is pretty much totally useless on this phone.
A clear plastic cover would work brilliantly. The reason this collects lint is because the lens is down in a hole. It wouldn't collect lint if there was a lens surface flush with the exterior of the phone. Also a lens surface level with the exterior of the phone would be very easy to wipe off with your shirt tail or whatever if it had a fingerprint on it. But the lint is guaranteed to be there if you put your phone in your pocket as it is and it's a royal pain to get it clean.
mr72 said:
OK obviously you can just clean it by jamming something in there or carry around a lens cleaning pen or whatever, that's not the point. The point is to come up with a solution that is not such a pain to clean it. My wife & daughter both have iPhones and they just take them out of their pocket and shoot a picture. If I'm going to have to clean the danged lens with a q-tip or a lens cleaning cloth or whatever EVERY TIME I USE IT then the camera is pretty much totally useless on this phone.
A clear plastic cover would work brilliantly. The reason this collects lint is because the lens is down in a hole. It wouldn't collect lint if there was a lens surface flush with the exterior of the phone. Also a lens surface level with the exterior of the phone would be very easy to wipe off with your shirt tail or whatever if it had a fingerprint on it. But the lint is guaranteed to be there if you put your phone in your pocket as it is and it's a royal pain to get it clean.
Click to expand...
Click to collapse
eh not quite that easy of a solution. HTC Tilt 2 had a plastic cover flush with the backcover of the phone to cover and protect the recessed camera lens. it still managed to take horrible shots with it...because the plastic cover was prone to getting tiny scratches almost impossible to see, but picked up by the camera lens. removing the cover made pictures FAR clearer and better.
unless they start making gorrilla glass to cover and protect the camera lens..we're stuck with wipe and shoot.
Anyone using the phone without a case/cover?? Worried about the camera lens getting scratched since the lens is flush with the battery cover and touches whatever surface you lay the phone down on.
Who is using the phone without any case or cover?
How long have you had it without a case/cover?
Has your camera lens gotten scratched?
Thanks in advance for any insight you might give!!
I have the SView wireless charging cover the camera is recessed about 1/16" from the battery cover.
Sent from my SAMSUNG-SGH-I337 using Tapatalk
pete2275 said:
Anyone using the phone without a case/cover?? Worried about the camera lens getting scratched since the lens is flush with the battery cover and touches whatever surface you lay the phone down on.
Who is using the phone without any case or cover?
How long have you had it without a case/cover?
Has your camera lens gotten scratched?
Thanks in advance for any insight you might give!!
Click to expand...
Click to collapse
I've had my GS4 caseless for a year now. The silver ring around the camera area seems to have taken all of the scratches. I can't find any scratches on the clear plastic that covers the camera module. To be fair, I'm pretty careful with my electronics. The worst I do is put my phone down on my wood desk. But it does seem that the ring around the camera module does a fairly good job of protecting it from scratches considering it's completely scratched up. I'm not sure if you'd even notice a problem in photos if the plastic cover got scratched since it's not part of the camera optics.
I may be the only one that did not know this, but I thought that I would mention it just in case. There is a protective film on the Note 4 rear camera. In my case, I did not see it while using the camera for over 2 weeks. The film is hard to peel off because the edges of the film are inside the frame and it is very hard to get your fingernail under it. I was not really sure if the film was there or not. I tilted the back so that the light glare was shown. I noticed that the surface of the camera was not shiny and there were tiny scratches on it. After picking at it with my fingernail, it finally peeled off and all is well.
It has a hole in it so it doesn't actually cover the lens. I'm not sure what purpose it serves, but I've left mine in place.
Yes, I see it now. Obviously does not affect picture quality. I had peeled all the other film off the camera so this is just the last.
Is there a place where we can order replacement film?
I just left mine there. No idea what its for.
That little guy...
It's there to protect the camera lens. You can keep it on since it doesn't interfere with the lens but it's intended to be removed like the rest of the protective film.
Lol. This has been on every Galaxy phone I've bought. It's just the shipping plastic like around the sides of the phone lmao ? ? ?
Hello !
I broke the rear glass which protects the rear camera lens. I've the piece I need on aliexpress so I assume there is a way to replace it. I know you can dismantle the back frame and have access to it thanks to a youtube video. I'd like to know how the glass is stuck to the back frame. Is it glued ? Is it mechanical ? Do you know a way to remove it without breaking anything else / splling glue everywhere ?
In case you're wondering, I broke it simply by not using a protective case. I don't know who's the stupidest : the engineer who designed a phone with a piece of glass protruding from the back plate, or the guy who buys that phone.
Have a great day.
So recently I cracked the rear glass on my Pixel 2 XL. After searching around, I found the "official"repair places wanted around $80 to replace this. Then I found eBay had replacement glass for $13 (in the US, cheaper from China), and decided to give it a try. Figured worse case scenario I end up at the repair place getting the glass replaced anyway, and I'm out $13 extra.
This was not a difficult process necessarily, what I will say is that the glass used is extremely thin (stock and aftermarket), and the process of removing the old glass is likely to produce many tiny glass fragments.
Here's how I did it, if anyone is interested in giving this a try:
1. Mis en place. I used a couple plastic and nylon spudgers, guitar picks, one metal spudger, a hair dryer, and packing tape. I did this repair in the bathroom near the sink so I could easily brush small glass pieces into the sink and wash them down the drain.
2. Start off by heating up the rear glass with the hair dryer, but not too hot. You need to be able to hold the phone afterall. Take a piece of packing tape and place it over the rear glass to somewhat keep it together.
3. I used the thin metal spudger to get started on one side of the glass. I started on the broken side as I already had a gap there to work with. Slowly go around and remove the glass and double sided tape from the rear frame.
3. Remove the camera lens cover from the glass. It's attached to the glass with double sided tape. Most likely going to be small chunks of glass stuck to the front of the lens assembly.
4. Clean up any leftover glue/double sided tape and chunks of glass, so you have a nice clean surface to stick the new glass to.
5. Install the lens cover on the replacement glass, and clean the inside and outside of the lens cover and inspect the camera assembly itself for chunks of glass/dust/etc.
6. Install the new glass (with lens cover now attached) to the back of your Pixel 2 XL. Be very careful to line it up exactly where you want it to sit before dropping it onto the frame of the phone (you likely will not be able to peel it off and reapply it if you mess up, as the glass is very thin and would probably shatter if you try to remove it).
7. Profit.
That's about it. All in all this took me about 30 minutes from start to finish, and saved me just over $60. Worth it for a cheapskate like me ?
Hope this helps someone.
Excellent write up, and the great photos!
Thanks for posting
Superusefull!! Thank so much!
do you feel like this compromised the water resistance part of the phone?
im pretty sure the waterproof feature is gone
jyn1989 said:
im pretty sure the waterproof feature is gone
Click to expand...
Click to collapse
It has never been waterproof.
Sent from my Pixel 2 XL using Tapatalk
Hello everyone,
I've broken lil bit the glass and considering replacement. But don't want to lose waterprofness. What do you think about this statement:
"The glass back of the Pixel 2 is purely decorative, and the Pixel 2 will still be waterproof with a broken glass back.
Why? As can be seen in the teardown video at https://youtu.be/Zq7nyzldgr4 at 4:14, the back cover of the Pixel 2 goes underneath the glass. Also, it looks like replacing the glass back would not require a teardown, since there seem to be no screws holding the glass in place from the inside. I suspect the glass back is merely glued on or clipped in."
For me it sounds reasonable that waterprofness might still be there after replacement. Attaching screenshot of mentioned back cover which is going under the glass.
Thanks for your opinion!
Pixel 2 is waterproof
Pixel 2 is IP67 rated meaning it's good for up to a metre depth of water, hence it being waterproof but if anyone was wondering even if you do break the back glass as I have it's purely cosmetic as there is some pretty strong plastic and glue behind it keeping the waterproof feature in place
How do you fix it to be waterproof like factory?
|Use waterproof glue around camera lens and LED lens or is there a adhesive to buy?