i tried to upgrade my samsung grand prime(SM-G530H) using kies .the process completed without any disturbances but then my phone got soft bricked. no recovery too.. the phone keeps on rebooting but doesnt pass the boot screen. only download mode is accessible. tried to flash every possible thing via odin,but no improvements. Flashed recovery img and official firmware too. but no use.
i have not found a solution till now for this exact problem.Help me out
hey please help me i cant even go to download mode and recovery i was installing the stock firmware after that i had installed xenon rom for my sm-g530h it had some problems or bugs so i decided to install the downgrade stock firmware, when i started to install, it was not installing i tryed about 3 times, and now, i cant get any response now, i cant able to put in download mode or recovery, even it dont showing me the charging... please help me i cant detect it on my computer also please help me :crying:
facing same problem
mak3022 said:
i tried to upgrade my samsung grand prime(SM-G530H) using kies .the process completed without any disturbances but then my phone got soft bricked. no recovery too.. the phone keeps on rebooting but doesnt pass the boot screen. only download mode is accessible. tried to flash every possible thing via odin,but no improvements. Flashed recovery img and official firmware too. but no use.
i have not found a solution till now for this exact problem.Help me out
Click to expand...
Click to collapse
i am also facing same problem pls help me out if the solution is there/
guys i have softbricked my lenovo a6000 and its stucked on lenovo logo
i have tried adb method to flash back recovery mode but when i rum commands it gives error == device null found
when i connect my device to pc it makes an connected sound help me out of this as this is the only mobile i was having
plzzzzzzzzzz guyzzhelp me out
Bro need help I installed twrp and then cm 13 on my a6000 and by mistake I deleted backup of my stock kk rom and now when I try to go in download mode, recovery it doesn't open it show only Lenovo logo . By mistake I flashed a6000+ stock recovery and after that when I try to flash stock recovery of a6000 using adb nothing open .. so now nothing download mode or recovery mode is opening but i still boot into cm13 how solve it to revert back to kk ?
Solution
Shubhamraaj said:
guys i have softbricked my lenovo a6000 and its stucked on lenovo logo
i have tried adb method to flash back recovery mode but when i rum commands it gives error == device null found
when i connect my device to pc it makes an connected sound help me out of this as this is the only mobile i was having
plzzzzzzzzzz guyzzhelp me out
Click to expand...
Click to collapse
I had also stuck in boot logo once in a custum ROM .
but i fixed it : steps .
Download twrp recovery in your pc. ( rename it as twrp.img ) ,
Boot your phone in to fastboot mode .,
Make sure ur pc has ADB drivers ,
Once , phone get into fastboot mode ,
Type this Commands : 1)fastboot devices ( to check if ur phone is getting detected or not , if it shows no device found , check connection )
2) fastboot flash recovery twrp.img ( to flash recovery)
3) fastboot reboot recovery ( to boot into recovery )
4) download any ROM to SD card and flash it from recovery.
Hit thanks button if this helped you.
Hello guys I have a6000 (Lenovo)
But my problem I saw this video
. Which is easy to revert back to kk rom but I have installed twrp which is not useful for above video method .so when I try to to install Philly or cwm which is used in above video it not installing only twrp will installing other custom recoveries not installing so please help me!!! If anybody have the twrp backup of stock kk rom of a6000 please send me!!
My lenovo a6000 also got stock on boot logo in a custom rom. Its now in no use. Now when i try to connect ut to my pc, its only charging. My device is not being connected to pc. Now what to do ??
Androidsabya said:
My lenovo a6000 also got stock on boot logo in a custom rom. Its now in no use. Now when i try to connect ut to my pc, its only charging. My device is not being connected to pc. Now what to do ??
Click to expand...
Click to collapse
FOLLOW THIS
Need help
sasukay said:
FOLLOW THIS
Click to expand...
Click to collapse
Actually 1st i did root my lenovo a6000. Then i was trying to install cyanogen rom through sd card. But it showed e verification failed. And while booting it gets stock showing cyanogen logo. I tried my phone to connect to pc, but it only charges my phone but doesn't show up in connected device in my laptop. I went to an mobile repair shop, bcoz i thought may be i was missing something. But after visiting 3 repair shops, they also couldn't solve my problem. Now how can i get my mobile to back condition ? Need help. If anyone can help plz give quick rply. But i need to talk to someone who can help regarding this issue. So if you can talk to me, plz call me 7008678740. Thank. Plz give response.
New problem arrised
sasukay said:
FOLLOW THIS
Click to expand...
Click to collapse
I could successfully restored my lenovo a6000 kitkat rom. But a new problem arrised. When i try to power on, it just starts for 2 seconds and vanishes immediately just showing the lenovo logo. Again n again it just being on and off. When i put this battery in another a6000 plus mobile, the same problem occurs. I mean , i want to know why is this happening ? Is the battery gone !!!
Androidsabya said:
I could successfully restored my lenovo a6000 kitkat rom. But a new problem arrised. When i try to power on, it just starts for 2 seconds and vanishes immediately just showing the lenovo logo. Again n again it just being on and off. When i put this battery in another a6000 plus mobile, the same problem occurs. I mean , i want to know why is this happening ? Is the battery gone !!!
Click to expand...
Click to collapse
On first look, it seems like your phone is in bootloop and you need to flash new ROM after wiping the partitions correctly. But, then you are saying that same thing is happening when you insert this battery in another A6000. I think your battery has gone rogue due to some virus, just throw it away. Jokes apart, if another device is showing same behaviour then its almost 100% sure, that your battery has issues and need to be replaced. And, why don't you actually check switching on your phone by putting the battery from that another A6000 into your A6000.
I have checked with another battery, my phone works fine. But that particular battery is doing only on off continuously. But #important thing is , i don't think the battery has gone. Bcoz during the on off process, if i press volume down key, it shows lenovo logo and gets stock there. If the battery has problem, then how can be it stays on showing the logo ?? Confused ???
Hello devs,
I was trying to flash the latest firmware PDA G550FYXXU1BQE2 and CSC G550FYODD1BQE2 on my Galaxy On5 (SM-G550FY) (ROOTED). When I was flashing it stuck on flashing sboot.img then i removed the usb cable , removed the battery and reinserted and trying to boot in download mode but it wont boot in download mode or in recovery. The phone is totally dead now.
No response to my PC.
Please help me to get out of this...
Any help would be greatly appreciated
Thanks!!!
Are you able to adb into phone from pc?
vtinoc said:
Are you able to adb into phone from pc?
Click to expand...
Click to collapse
No, It is totally dead.
i tried to root my phone with cf auto root and my phone is trelteskt and android 5.1.1 korean phone and made sure that the file is trelteskt then i used odin then it said pass and the phone automaticly started rebooting then showed this error and the whole phone wont work and tried to remove battery and put again and still not working and tried to enter recovery mode and i cant enter and odin is not reading the phone and it looks like boot loop and i tried all of those and still not working and i searched in websites and all of them said factory reset but i cant even enter the recovery mode even when removing battery and putting it again
and they said the second method to install the stock rom but i told you odin is not reading the phone and i unpluged it then connected it again with the pc the nothing happens pls i need help
i still can enter the download mode but please help me and now i can enter the download mode please give me a stock firmware link for n910s android 5.1.1
CrazyHomie118 said:
i tried to root my phone with cf auto root and my phone is trelteskt and android 5.1.1 korean phone and made sure that the file is trelteskt then i used odin then it said pass and the phone automaticly started rebooting then showed this error and the whole phone wont work and tried to remove battery and put again and still not working and tried to enter recovery mode and i cant enter and odin is not reading the phone and it looks like boot loop and i tried all of those and still not working and i searched in websites and all of them said factory reset but i cant even enter the recovery mode even when removing battery and putting it again
and they said the second method to install the stock rom but i told you odin is not reading the phone and i unpluged it then connected it again with the pc the nothing happens pls i need help
i still can enter the download mode but please help me and now i can enter the download mode please give me a stock firmware link for n910s android 5.1.1
Click to expand...
Click to collapse
https://www.sammobile.com/firmwares/galaxy-note4/SM-N910S/
just flash last frimware from sammobile(6.0.1) like Trexx888 said
Hi everyone, I have a samung note 4 (SM N910C) and while using it just went off and when turned back on is stuck on the Samsung galaxy logo and wont get past it, tried pulling battery and memmory card and all as soft tricks from google but is of no use, so tried flashing a stock rom and odin shows pass at the end but the phone wont get past the samsung logo, checked and found need to do a format and all through recovery but i cant get into recocery either, havng error message recovery is not seandroid enforcing, tried flashing twrp but still odin pass and the error persists..
Anyone could be of any assistance please? Is there any workaround for this issue? Thank you in advance for the help..
Hello? Anybody plz.
try the PC program Smart Switch, you may succeed to get the emergency firmware installed on it
this might help