Related
I've read pretty much every source I can find on getting a custom ROM up on my LG G2, which I haven't even rooted in the past 2 and a half years. My warranty ran out a while back and I'm getting a bit bored with stock now, and I want to start flashing, but the last time I did this was with my old HTC Desire HD.
As you can see I'm on 20d on my LG G2. It's a Hong Kong version for some reason, lol. What I considered doing was the following: update to the latest Lollipop official ROM using the LG Flash Tool (it gives me an available update to 30d); root using the rooting app, install a recovery with AutoRec Lollipop, flash a thermal recovery from the installed recovery (very scared of my phone overheating, I'm even considering putting it on a large, fast-running fan while doing anything, read too much about the phone overheating and making the screen yellow); back up my phone's IMEI data; use the recovery to install a brand new (I'm hoping a Marshmallow) ROM. I also understood that I need to flash a bootstack to change my bootloader to a KitKat, because it can be "fooled" using the BUMP thing. Is that correct? Do I even have to update my phone to Lollipop in this case? Also, how likely is it to overheat while doing all of these procedures?
Thanks in advance!
Sorry for the necroing my old thread, but I have yet to do anything with my phone. I am also still on KK. I saw that I can start rooting and install TWRP from it straight away. After that I need to flash a bootstack, right? How likely is it that I can brick myself? By that I mean what could get mixed up to get a brick while flashing. Also, has anyone had overheating issues while doing root, recovery installation and flashing things (newer TWRP, bootstacks, new ROM)?
Hi, i can understand your situation as i was in same till today, g2 with stock kitkat.
i finally installed cm13 after rooting it and the phone feels fresh.
you have understood most things right and ready now.
you dont need to upgrade to lollipop if youdont want to, you can start from kitkat itself.
few things i can tell you to begin here,
Root your G2,
for kitkat i found few good methods. Either do it via ioRoot using pc. or you can use towelroot or kingoroot apps to do it from phone itself. I used kingoroot since i didnt have a system with me. You can find these apps by searching at google, jst tyoe kingoroot. At first i was skeptical but it worked nice.
after root, you download autorec app, this is to install a custom recovery(twrp) for kitkat. you just have to install the app and run it and press install recovery/twrp and it'll do the rest.
after you have twrp installed, you need to upgrade it to latest version. For that download blastgator's twrp for your model and flash it through your recovery.
oh and dont forget to learn, how to enter into recovery yourself, since each G2 model has different method.
once you have these things you can start flahing roms. Most of the instructions on how to flash certain rom with what bootloader and bootstack etc. is written in its own thread, so you can learn that from that rom's thread that you will flash.
but basically, you need kk bootloader and lp bootstack for cm13 and above. usually both these things come in one zip. (if not you check for hybrid bootstacks)
Just make sure you are downloading things For your Model, if you try to flash different models stuff into yours, itll brick.
The autorec app, blastgator's twrp and ioroot can be found in a sticky thread in G2 general section, along with many other files and guides in that thread, theres complete index in that thread of all thing for all g2 models .
here : http://forum.xda-developers.com/lg-g2/general/05-10-index-guides-fixes-roots-t3218178
also usually the phone doesnt heat up while flashing, just make sure your battery is more than 80% before you start and itll be ok. Even if it does a little, after a custom rom itll be fixed. I suggest you try cm13 for starters as your first custom rom.
hope this helps you :good:
Good Luck ::highfive:
Thank you very much, appreciate the vote of confidence, lol.
I've actually considered installing Resurrection Remix Marshmallow. In the thread they point to the hybrid bootstack I need to install. I am on a D802 phone, so I'll be downloading that boostack. Anything I should really know before flashing that particular stack, except that I need to run the latest recovery from blastagator? Can I boot back into my old stock KK installation before putting the new ROM and Gapps on my phone and wiping + flashing, or will the phone not be able to boot that old firmware with the new bootstack? Theoretically, can the phone still get bricked even if I'm using the latest recovery + the proper bootstack? I've read that the CM13 devs don't recommend flashing bootstacks but instead using the kdz flashing method to flash the latest Lollipop release...
hitmancho said:
Thank you very much, appreciate the vote of confidence, lol.
I've actually considered installing Resurrection Remix Marshmallow. In the thread they point to the hybrid bootstack I need to install. I am on a D802 phone, so I'll be downloading that boostack. Anything I should really know before flashing that particular stack, except that I need to run the latest recovery from blastagator? Can I boot back into my old stock KK installation before putting the new ROM and Gapps on my phone and wiping + flashing, or will the phone not be able to boot that old firmware with the new bootstack? Theoretically, can the phone still get bricked even if I'm using the latest recovery + the proper bootstack? I've read that the CM13 devs don't recommend flashing bootstacks but instead using the kdz flashing method to flash the latest Lollipop release...
Click to expand...
Click to collapse
to upgrade from kitkat you need lp or hybrid bootstacks. they have images (. img files) that are needed for your phone to function properly., like aboot, modem, radios etc. Hybrid bootstack contains aboot from kk and everyhing else from Lp. So when youll flash a bootstack, youll need to wipe everything, except internal storage(or external if you have one) , before you can flash it. that wipe will include, cache, dalvik cache, system, data. so basically all the old system stuff will be gone before you can flash this bootstack. i hope after reading that youll know that you cant access your old kk installation since itll be wiped, therell be nothing to boot to. if youll try, it will give you errors on lg logo.
understand it like this, to install new 21 inches tyres to your car, you need to upgrade the rims to hold a 21 inch tyre right? what will happen if you just put the 21' tyres on old 15' rim or old 15' tyres on new 21' rims?
the cm 13 devs dont recommend you to flash bootstacks because most of the models took the official lollipop update, which put everything in their phone to lolipop level. since there is no official marshmallow(MM) bootstack for our phone (because no official update), everyone developed ways to utilize lollipop bootstack to function on a custom MM Rom. Since most models are already on lollipop, theres no need to flash lollipop bootstack while flashing custom rom. That step is mostly for those who are still on stock or custom kitkat based rom. So they say to get official lollipop through kdz method, instead of flashing Lp bootstack before gettig their rom. But remember if a rom developer asks to install a bootstack for their rom, you should consider it if you dont have much knowledge about it, cause if you dont follow instructions, you can soft brick, in that case youll need hybrid bootstack.
see if you are using everyhing proper for your phone then your phone wont brick. only thing that can go wrong with that condition is your execution, your steps. As long as you dont make a mistake in these steps everything will go fine.
ill explain it what you should do.
1. first root your phone.
2. when done rooting, install "root checker" from google play. itll confirm if you have root or not.
3.Then you come back here and find autorec app from the link i gave you in my previous reply. download that, install the autorec app. and follow on screen instructions and itll install twrp recovery for you.
4. then come back here again, and find blastgator's twrp, from the same link in previous post. itll be the one whih says "twrp with f2fs". download it and remember where you put it.
5. turn off phone, boot into recovery (i hope you've learned by now how to get into recovery of your g2 model). Now youll be in recovery, hit install button there and find where you put that file, flash it, then reboot recovery, youll have new recovery after that. then you reboot into system.
now upto this point, you can play along in your kk, have fun with features, say last goodbyes and all lol. Because everything stock kk related will be gone, past this point, including all the apps you have installed.
[IMPORTANT] : after rooting and installing recovery, get bootstack zip, rom zip and gapps zip files downloaded and placed together in a folder on your phone, before you start with flashing bootstack. Because you wont be able to boot back into system after flashing just bootstack.
now you prepare for MM, boot into recovery, now since you are in kk, you need to install LP bootstack, and for that you need to wipe everything using your recovery's wipe feature.
6. in recovery, hit wipe, hit advanced, select cache, dalvik cache, system, data. [ Dont select internal storage otherwise all flashing files will be gone and youll be left with a brick.] and wipe.
7. Now hit the back button to go back to main recovery screen once wiping is finished. hit install, flash the bootstack zip.
8. now your phone has new bootloader but its still empty, like you got a body but no soul . so hit back button, hit install and flash the rom zip you downloaded.
9. now flash gApps same way.
10. once its done, just hit reboot system. no other steps needed.
11. be patient, first boot takes longer than normal boot.
12.enjoy MM :highfive:
you probably know these steps from all the reading but its for your reference, so you dont screw up at all and be safe from bricking.
you can get google apps from opengapps website. you need to get ARM-> 6.0 -> (your prefered ones) pico/nano/micro/etc.. pico has the least amount of gapps, all important ones are there in pico, then extra will increase as you go up from pico to stock. stock has all the gapps. size will also increase as you go up. so choose as you prefer.
now once you have a cm13 /MM based rom, you wont need to flash bootstacks for other roms from next time unless the developer instructs to do so.
good luck
@MarshisnotMellow
Does the cwm mm come pre rooted? Or unrooted ready from whatever idiocy I'm ready for?
1.stock
2.root
3.autorec twrp
4.upgrade to blastagators 3.0.2-1> or a different version I'm missing? This one says blastas twrp bump
5.put cwm rom, bootloader, gapps <where to get gapps zip?> onto internal memory somewhere familiar to me
5.wipe all but internal memory
6.flash bootloader
7.flash rom
8.flash gapps
9.???
10.profit
Check my steps teacher? I'm gonna start it anyway when my phone hits 80+ percent
andrew2432 said:
@MarshisnotMellow
Does the cwm mm come pre rooted? Or unrooted ready from whatever idiocy I'm ready for?
1.stock
2.root
3.autorec twrp
4.upgrade to blastagators 3.0.2-1> or a different version I'm missing? This one says blastas twrp bump
5.put cwm rom, bootloader, gapps <where to get gapps zip?> onto internal memory somewhere familiar to me
5.wipe all but internal memory
6.flash bootloader
7.flash rom
8.flash gapps
9.???
10.profit
Check my steps teacher? I'm gonna start it anyway when my phone hits 80+ percent
Click to expand...
Click to collapse
cwm is clockworkmod, its a custom recovery. i think you meant CM 13, mm rom.
yes, the Cyanogenmod team have placed root access into the rom, so once youll be finished wih installing cm 13 rom, you can just go to settings, Tap build number repeatedly until a message will show "congrats you are a developer now". that'll open developer options in main setting screen Go into that and youll see root access. turn it on. youll have root.
you can check in root checker app to confirm root access for confirmation. you wont need super su app in any of these roms anymore.
your steps :
stock
1. root
2.autorec (for installing twrp on your phone) for kitkat its on forums, for lollipop its in google play. just get the one for your model, search for autorec in google play.
- blastgator's twrp requires you to have any version of twrp beforehand in order to install his version.
3. download and save blastgator's latest twrp, when youll go to download his twrp, itll be written there which one's is the latest version, just download that one and flash it through recovery.
4. Yes place all files in your phone, you can get gapps from opengapps.org/
select arm- 6.0- whatever size you like(, pico is lightest contains all essential gapps, stock contains every gapps)
5. wipe yes.
6. flash bootstack
7. flash rom
8. flash gapps
9. once gapps done, just hit reboot system.
10. enjoy
yes go for it when you have more than 80% battery, this is to ensure that all flashing steps go through without any issue, you dont want your phone to run out of juice while flashing rom do you that could cause soft bricks. so always keep battery more before flashing.
[IMPORTANT] : remember to read instructions of the rom you're installing and adjust the steps as instructed in there.
Goodluck :highfive:
Awesome, I forgot to.flash gapps prior to something I just did, not sure if it will cause increased global warming or thermonuclear war...update soon
@MarshisnotMellow
Gapps installed!! No Internet connection on the d800 and something sinister has happened to my unlocked WiFi Hotspot so I'll have to check for play store capabilities later!! Thanks for the help!!
I decided to go with the latest 29.10.2016 nightly of CM13 for my first run on this phone. Everything went through, no one died, lol. I'm going to start installing and restoring stuff now, get Xposed on, like I have on my TF701T tablet and trick out my phone's appearance. Just a note - after you install new bootstacks your phone's MAC address will change, so if you have a WiFi network with a MAC filter you might want to add your new address.
Hello,
Just got it and already bricked it, hooray.
I did the Nougat update and allowed modifications (the swipe in TWRP). I'm dumb
So here's everything I did :
First I used the Axon 7 Toolkit by BKORES to unlock bootloader and flash TWRP.
At step 9), It failed to boot TWRP even tho I could access it with power+volume.
It eventually would get stuck at the ZTE logo when I wanted to boot system.
I flashed SuperSU with an SD card in recovery.
So : Fastboot and system won't work. Recovery would, and so does bootloader from this.
What should I do ?
CiT42 said:
Hello,
Just got it and already bricked it, hooray.
I did the Nougat update and allowed modifications (the swipe in TWRP). I'm dumb
So here's everything I did :
First I used the Axon 7 Toolkit by BKORES to unlock bootloader and flash TWRP.
At step 9), It failed to boot TWRP even tho I could access it with power+volume.
It eventually would get stuck at the ZTE logo when I wanted to boot system.
I flashed SuperSU with an SD card in recovery.
So : Fastboot and system won't work. Recovery would, and so does bootloader from this.
What should I do ?
Click to expand...
Click to collapse
Nah this is a soft brick, nothing to worry about
Maybe your SuperSU did some bad stuff on the rom. For exampls if you flash SuperSU 2.79 or higher on Android 6 (at least in the stock rom) it won't boot. Maybe try flashing Magisk B13? I think it gets rid of SuperSU
There's a no-verity-opt-encrypt file too, somewhere in this forum, maybe in Kernels, ROMs thread. Maybe give it a shot
Another way is going back to the stock recovery and flash an official package. I have made an easy guide for the A2017G, not sure if it works on the U or chinese. you can find it over at Guides, should be pretty close to the top
If you have an A2017U you can get the DrakenFX system files and install them, maybe you can fix the stuff
Or take the easy way, and install a custom ROM. Not the best choice unless you're willing to withstand some small bugs and stuff. The way to install them is get the A2017X_Universal_Bootstack and corresponding modem for your model, plus the ROM and OpenGApps 7.1.2 arm64 (Or beansgapps if the rom specifies), and of course the ROM itself. You wipe system, data, caches (not necessarily internal) then flash the Universal Bootstack and tbe modem, then the ROM, then GApps if you want to have them, then Magisk or SuperSU if you want root (some roms come with self-installing Magisk in the same package, too).
Or use MiFlash and flash a complete stock image of your phone's system. That one works like a charm
Choose an username... said:
Nah this is a soft brick, nothing to worry about
Maybe your SuperSU did some bad stuff on the rom. For exampls if you flash SuperSU 2.79 or higher on Android 6 (at least in the stock rom) it won't boot. Maybe try flashing Magisk B13? I think it gets rid of SuperSU
There's a no-verity-opt-encrypt file too, somewhere in this forum, maybe in Kernels, ROMs thread. Maybe give it a shot
Another way is going back to the stock recovery and flash an official package. I have made an easy guide for the A2017G, not sure if it works on the U or chinese. you can find it over at Guides, should be pretty close to the top
If you have an A2017U you can get the DrakenFX system files and install them, maybe you can fix the stuff
Or take the easy way, and install a custom ROM. Not the best choice unless you're willing to withstand some small bugs and stuff. The way to install them is get the A2017X_Universal_Bootstack and corresponding modem for your model, plus the ROM and OpenGApps 7.1.2 arm64 (Or beansgapps if the rom specifies), and of course the ROM itself. You wipe system, data, caches (not necessarily internal) then flash the Universal Bootstack and tbe modem, then the ROM, then GApps if you want to have them, then Magisk or SuperSU if you want root (some roms come with self-installing Magisk in the same package, too).
Or use MiFlash and flash a complete stock image of your phone's system. That one works like a charm
Click to expand...
Click to collapse
I flashed DrakenFX's B29 stock rom. Didn't thought it would work with recovery but anyway ! Thank you.
Do you recommend some ROMs, kernels, etc ?
CiT42 said:
Do you recommend some ROMs, kernels, etc ?
Click to expand...
Click to collapse
Nah, they are all mostly bad. The best of the bunch seems to be NucleaRom, it has an okay kernel (Radioactive, not too good battery-wise but I've never seen so little UI lag, like, ever) and okay features (like 1/3 of what ResurrectionRemix has), an awesome maintainer (OrdenKrieger) and boots in like 15 seconds
But the stock ROM is currently the best of them all, not battery wise (you can get some obscenely high SOT numbers on LineageOS with Substratum black themes) but it's fluid and stuff runs well on it. The status bar is hideous though, and MiFavor is white themed, on an AMOLED screen, what the crap ZTE?
Don't try PureNexus, permanent hard brick from the looks of it.
LineageOS works okay but it has some compatibility problems with some apps I use, dunno
I think you could try the dual-boot patcher, that way you can test the roms and keep a working stock rom to use it as your daily driver without losing data. i never used the dual boot patcher though, so good luck if you will use it
I've bad experiences with Dual boot on my old 1+.
OK, so I totally ****ed up somewhere while trying to wipe and flash stock while I could only see half my screen. I now have a fully working screen but no system.
Current situation is if trying to boot phone normally I get stuck on ZTE logo.
If I press volume keys during boot I get to here; https://puu.sh/z7YQa/8de2adc04e.jpg
Selecting recovery takes me to TWRP which immediately asks for a password (that I never set up).
If I attempt to flash RR (which was previously installed) I get error 7. (Lineage OS has the same response) https://puu.sh/z81cA/6371d882cc.jpg
I can successfully flash the latest TWRP (twrp-3.2.1-0-ailsa_ii.img).
I've also tried flashing A2017_N_Modem.zip and ZTE_A2017GV1.0.0B09_BootStack_by_tron1.zip which appear to complete successfully.
TWRP ADB Sideload seems to work and my PC can see the phone (adb devices but I've not tried anything with that yet for fear of ****ing up further.
Code:
C:\Users\Fish\Downloads\ADB>adb devices
List of devices attached
e33edd51 sideload
MrGodMan said:
OK, so I totally ****ed up somewhere while trying to wipe and flash stock while I could only see half my screen. I now have a fully working screen but no system.
Current situation is if trying to boot phone normally I get stuck on ZTE logo.
If I press volume keys during boot I get to here; https://puu.sh/z7YQa/8de2adc04e.jpg
Selecting recovery takes me to TWRP which immediately asks for a password (that I never set up).
If I attempt to flash RR (which was previously installed) I get error 7. (Lineage OS has the same response) https://puu.sh/z81cA/6371d882cc.jpg
I can successfully flash the latest TWRP (twrp-3.2.1-0-ailsa_ii.img).
I've also tried flashing A2017_N_Modem.zip and ZTE_A2017GV1.0.0B09_BootStack_by_tron1.zip which appear to complete successfully.
TWRP ADB Sideload seems to work and my PC can see the phone (adb devices but I've not tried anything with that yet for fear of ****ing up further.
Click to expand...
Click to collapse
Look, you have an A2017G, right? Error 7 is caused by not flashing the universal bootloader. The password is because you forgot to flash magisk or supersu on the last rom's first boot.
Download 3 things: raystef66's TWRP flashable B09 bootstack and stocksystem zips (from the download center or the dedicated thread, but make sure that it's the TWRP flashable ones) and Magisk 15.2. Install the BOOTSTACK, then the ROM, then Magisk. After that go to Wipe, and FORMAT DATA (not wipe!). You'll lose your internal storage.
Choose an username... said:
Look, you have an A2017G, right? Error 7 is caused by not flashing the universal bootloader. The password is because you forgot to flash magisk or supersu on the last rom's first boot.
Download 3 things: raystef66's TWRP flashable B09 bootstack and stocksystem zips (from the download center or the dedicated thread, but make sure that it's the TWRP flashable ones) and Magisk 15.2. Install the BOOTSTACK, then the ROM, then Magisk. After that go to Wipe, and FORMAT DATA (not wipe!). You'll lose your internal storage.
Click to expand...
Click to collapse
Thank you so much. Got that all done nicely and have a working stock ROM.
How would I now get from here back to RR?
MrGodMan said:
Thank you so much. Got that all done nicely and have a working stock ROM.
How would I now get from here back to RR?
Click to expand...
Click to collapse
Reading instructions is a start :laugh:
For real now: Get the ROM, the B15 universal bootloader (from the Lineage thread), get the latest modem file from the download center (B09 now for example), Magisk 15.2, GApps zip (unless you'll go microG) and be sure that you are on the latest TWRP or update to it.
Flash the bootloader and modem file (you'll have to install the modem as image i think). After you flash the bootloader your phone model becomes 'axon7' instead of 'ailsa_ii'; most custom roms use this to know whether you flashed it or not; and the region will be A2017U which is normal (it is based off of B15 for the U, don't panic). After that, flash the ROM and Magisk and GApps.
Choose an username... said:
Reading instructions is a start :laugh:
For real now: Get the ROM, the B15 universal bootloader (from the Lineage thread), get the latest modem file from the download center (B09 now for example), Magisk 15.2, GApps zip (unless you'll go microG) and be sure that you are on the latest TWRP or update to it.
Flash the bootloader and modem file (you'll have to install the modem as image i think). After you flash the bootloader your phone model becomes 'axon7' instead of 'ailsa_ii'; most custom roms use this to know whether you flashed it or not; and the region will be A2017U which is normal (it is based off of B15 for the U, don't panic). After that, flash the ROM and Magisk and GApps.
Click to expand...
Click to collapse
Perfection.
Everything works!
i have just found (twrp-installer-3.3.0-2-tissot.zip) file on TWRP's official website i just want to know is it same recovery installer as CosmicDan's ( TWRP-Installer-3.2.1-with-Tissot-Manager-2.5) recovery installer or is it something else and what if i flash it with TWRP
can any one tried this recovery installer. i want to try it but i don't have a PC now so i'm afraid of losing my already installed recovery
reply if anyone tried it.
You can always fastboot into CosmicDan's boot-recovery.img image from TWRP-fastboot_boot_only-3.2.1-with-Tissot-Manager-2.5.zip. It does not alter anything. From there you can install twrp-installer-3.3.0-2-tissot.zip to try. If you do not like it flash back TWRP-Installer-3.2.1-with-Tissot-Manager-2.5.zip from same fastboot-ed boot-recovery.img.
The differences between official and CosmicDan's are that official is newer and CosmicDan's has tissot manager to repartition for Treble. But that usually only needs to be done once.
Myself I have fastbooted boot-recovery.img image from TWRP-fastboot_boot_only-3.2.1-with-Tissot-Manager-2.5.zip some time because I was not comfortable with flashing TWRP-Installer-3.2.1-with-Tissot-Manager-2.5.zip in all sorts of Pie Treble experiments.
But once I knew twrp-installer-3.3.0-2-tissot.zip was Treble aware, I flashed it and it does what it needs to do (for me).
thanks bro but after posting this thread i flashed it in cosmicdan's twrp and got latest 3.3.0.2 version of twrp because its my habbit to do testing and experimental things with my phone and i can't wait for someone to test and post result so i did it.
actually i had a little bit doubt before flashing it and i have some important data on my phone so i just want to be sure coz i don't want to loose my data
you won't believe how much times i bricked my phones and bring back them to working
Hi there,
I am using a OnePlus 8 Pro on Oxygen OS 11, Global variant. I have been working on this for at least 10 hours now. I bought the OnePlus 8 Pro orginally running Oxygen OS 12, and when I flashed the recovery (TWRP) for the first time to two slots via this explanation
, I bricked the phone so the only tool accessible to me was fastboot.
Hmm okay, I'll just use MSM tool (https://forum.xda-developers.com/t/...l-to-restore-your-device-to-oxygenos.4084953/) to revert back to oxygen OS so I can continue my mission.
I am trying to install the latest CRDROID from their official website after follow their instructions on here. I get as far as being in fastboot mode with the OEM unlocked, and then I try to flash the recovery they provided. It doesn't work. When I select boot into recovery, I get sent back to fastboot, however, when I flashed the original recovery img for Oxygen OS 11 I took from the payload dumper, it loads fine.
OKAY so now I am thinking that perhaps there is a problem with the recovery provided. That is fine so I choose to use TWRP to flash the custom ROM. Thankfully, it does work, and I am able to load into it through recovery, however when I tried to flash the rom through ABD sideload, from the PC whilst in TWRP, it doesn't load! It gets halfway and stops. I tried this several times to no avail.
I choose to then (after having bricked the phone several times by now and having to revert to factory settings with MSM tool), try to flash the custom ROM from the internal storage of the phone via TWRP. That still does not work. I have also tried this with Project Elixir. No success.
I don't know what to do guys. I have followed the instructions provided, but I don't understand why the phone is not accepting other custom recoveries or allowing me to flash a custom ROM.
All help is very much appreciate.
You have to make sure that you are on OOS11 on BOTH slots.
What i would do now:
Use MSM Tool to go to 11.0.4.4.
Boot the phone and flash 11.0.11.11 via local upgrade TWICE (to ensure its on both slots)
Follow the instructions of CRDROID etc.
Edit: Dont use TWRP on Android12 now.
Read this carefully before you do anything: https://forum.xda-developers.com/t/...ro-8t-9r-with-oxygenos-12-coloros-12.4426167/
josephxdaForum said:
Hi there,
I am using a OnePlus 8 Pro on Oxygen OS 11, Global variant. I have been working on this for at least 10 hours now. I bought the OnePlus 8 Pro orginally running Oxygen OS 12, and when I flashed the recovery (TWRP) for the first time to two slots via this explanation
, I bricked the phone so the only tool accessible to me was fastboot.
Hmm okay, I'll just use MSM tool (https://forum.xda-developers.com/t/...l-to-restore-your-device-to-oxygenos.4084953/) to revert back to oxygen OS so I can continue my mission.
I am trying to install the latest CRDROID from their official website after follow their instructions on here. I get as far as being in fastboot mode with the OEM unlocked, and then I try to flash the recovery they provided. It doesn't work. When I select boot into recovery, I get sent back to fastboot, however, when I flashed the original recovery img for Oxygen OS 11 I took from the payload dumper, it loads fine.
OKAY so now I am thinking that perhaps there is a problem with the recovery provided. That is fine so I choose to use TWRP to flash the custom ROM. Thankfully, it does work, and I am able to load into it through recovery, however when I tried to flash the rom through ABD sideload, from the PC whilst in TWRP, it doesn't load! It gets halfway and stops. I tried this several times to no avail.
I choose to then (after having bricked the phone several times by now and having to revert to factory settings with MSM tool), try to flash the custom ROM from the internal storage of the phone via TWRP. That still does not work. I have also tried this with Project Elixir. No success.
I don't know what to do guys. I have followed the instructions provided, but I don't understand why the phone is not accepting other custom recoveries or allowing me to flash a custom ROM.
All help is very much appreciate.
Click to expand...
Click to collapse
And just do payload dump and flash .img in fastboot ROM installer