Hello guys! I need help with the fm radio or if it's possible to install any update to this hu. This is the model:
Android: yt9218c_00005_v003_20181224_hifi
System: Android 8.1 go kenel 3.18.22
Can pro: raise-17_tiang/17_concordiak
Flash: 16G
Cpu: a7 1,3ghz x4
Radio: nxp6851
Capacitance: 10000 ūf
Amplifier: ac7315 mos bile duct 45w x 4
Display: 1024 *600
Mcu1: hw8227l-3.3-sw0-1.9
Thanks guys!
I fully recommend ditch the native Radio app and purchase NavRadio+
Make sure it is compatible with your HU, in my case, the radio chip is NXP6686 and has been working with no issues. The radio is fully customizable and even better, you can make a backup of all the stations scanned. The purchase is absolutely worth it and the developer answer your emails for suggestions or support.
Related
I bought an Android Head Unit on eBay not really knowing what to expect... It arrived and everything seems to work ok. I was just wondering if I could upgrade the Android from 4.2.2 to 4.4.2 on the unit.
Model Number: jensor2
Android Version: 4.2.2
MCU Version: V2.11.1001.1000.0024
Protocol Version: YTDZN V201 Uion
Kernel Version: 3.0.36+
Screen: 8” Capacitive TFT touch
Screen Resolution: 1024*600
Operating System: Custom Android 4.2.2 Interface
CPU: Rockchip 3066 Cortex 1.6GHZ A9 Dual-Core
Memory: 1G DDR3 8G memory
Radio Tuner: NXP6856
TFT Drive IC: RK3066
Pick up: HITACHI 860XH
CAN-BUS: YTVW5 201 Uion
GPS: MTK3337
Bluetooth: BC6
Wi-Fi: RTL8188
Amplifier IC: TDA7388
DVR: USB Camera (PC Standard)
Video Decoder: 1080P HW
Music Format: MP3,WMA,AAC,RM,LFAC etc
Video Format: MPEG-1/2/4,H264,H263,VC1,RV,RMVB,DivX, Sorenson Spark,Spark,VP8,AVS Stream,JPG/BMP/JEPG/GIF/PNG
Any help would be much appreciated.. I started in the MTCB area but was told I should come here as mine is not a MTCB MCU unit.. It does look very similar to one of the Joyring units I saw on their site.
Thanks in advance
hi have just purchased this head unit on ebay : 7" 2DIN Bluetooth Quad Core Android 7.1 3G WIFI Car Stereo MP5 FM Radio GPS Navi
can you help me find info for this unit please
7in Touch Screen Bluetooth Quad Core 1.3G Android 7.1 Car Stereo
Decoder chip: MTK
Run memory: DDR 1G
Body memory: 16G
CPU: quad core, 1.3G
Screen size: 7 inches
Screen resolution: 1024 x 600 HD capacitive screen
Radio chip: QN8035
Amplifier chip TDA7388
UPC: 783761544975
Brand: Unbranded/Generic
Model: Car MP5
MPN: 2MK0UC2FK3XV6KP4
Mcu: CM_0.0730.0_180203_15:37
system: K6_01_IH_V2.01_20180326
bluetooth: WEIYIDE_851_160513
Good morning all,
I am new to this forum and neofite. I have a problem with my Android 9.1 2G RAM / 32G ROM car radio unit that I bought on the internet. It's a radio unit from China with unbranded.. I send a photo of my Android Unit setting of my radio. My problem is that I don't have the "fader-balance" icon in the upper right corner of the audio setting page. What should I do to fix my audio problem?
Android: haoling_00009_V001_20191128
Android os: 9.1 XY AUTO: 3.1 (8227L)
CAN Pro: 3.0 (8227L)
DDR: 2G FLASH: 32G
cpu: A7 1.3GHz X 4
display: 1024*600
MCU: 3.1 (8227L)
Additional information:
I read a on your forum and I noticed that there are a lot of chinese units are fake. So I installed CPU-Z and here is what came out of that:
CORTEX ARM Cortex-A7
Cores: 4
Architecture: 4X ARM Cortex-A7 @ 1.12Ghz
Revision: r0p3
Clock speed:
CPU0: 1118MHz
CPU1: 1118MHz
CPU2: 1118MHz
CPU3: 1118MHz
CPU Load: 99%
GPU Vendor: ARM
GPU Renderer: Mali-450 MP
GPU Load: 0%
Scaling Governor: performance
DEVICE:
Model: 8227L_demo_(full_8227L_demo)
Manifacturer: alps
Board: Unknow
Hardware ac8227l
Screen Size 7.42 Inches
Screen Resolution: 1024*600
Screen Density: 159 dpl
Total RAM: 1024 MB
Avaliable RAM: 609 MB (59%)
Internal Storage: 26.58 GB
Avaliable Storage: 18.91 GB (71%)
SYSTEM:
Android Version: 8.1Go
API Level: 23
Security Patch Level: 2017-11-05
Bootloader: Unknow
Java VM: ART 2.1.0
OpenGL WS: 2.0
Kernel Architecture: armv7l
Kernel Version: 3.18.22(1574920303)
Root Access: No
Google Play Service: 20.04.14 (040300-294335909)
System Uptime: 2 days 02.03.56
I think I got caught !!!! :crying::crying: Is it possible to have the correct Firmware to upgrade to Android 9.1 please. If yes, I would like to know how to do it.
Did you solve? I have the same problem. Radio is new.
Android 11.1
THERE IS NOT THE EQ/FADER ICONA.
I've installed a generic equalizer app but I can't control the fader and the sub channel. So I put the sub on an other rca sound exit...
Hi. I have got the same. No Equalizer for Radio. There is Equalizer for mp3 player ( App is called Music ), but not for FM radio app.
In Music app, I can change tones like bass and treble, but not balance or fader. I can change balance only on Car settings, but there is no option to change fader ( front and rear speakers ).
Is there any way we can add even simple Equalizer to FM radio App? Or is there another FM radio app with built-in Equalizer?
My radio is Hizpo from Hizpo Europe Store, 2GB RAM, 16GB ROM, 8227L CPU, Android 11 ( may be fake ).
I am trying to ask Hizpo Europe Store about this, but for now I am getting default answers.
Hello I have an unbranded headunit from eBay. I’ve already contacted the seller and tried my best to scour these threads but that hasn’t helped. I have no control of my subwoofer port on the back of there unit. The upgraded firmware that they show on the advertisement has an equalizer that includes sub, lo, mid, and hi but I have a 4 band with hz. I’m looking for the right firmware/mcu version
What my unit says now.
Android: YT9213A_00009_V001_20200312
Android os: 9.1 XY AUTO: 3.2 (8227L)
CAN Pro: 3.0 (8227L)
DDR: 2G FLASH:16G
Cpu: a7
Display: 1024x600
MCU: 3.1
What I’m looking for it to say
Android: YT_9217c_00005_V003_20181222 HIFI
Not important
Amplifier: ac7315 mos Bile duct 45wx4
Mcu: HW8227L 3.3- SWO-1.3
If that’s not possible I at least would like the most current update for this device or if I can flash another mcu firmware or software from a different device to it that would work too. I just want/need something better than what I’m working with now.
. Thanks in advance for any help.
Hi to everyone,
I explain you what's my thought since a month. I have a chinese radio head unit and the original radio app it's a little bit bugged and doesn't work well. My question is if there is an other app that I could install on that head unit or if I can change something from the system, such as the mode of searching the FM or the region of searching, etc..
Here's the details of the radio:
- Brand: Ankeway
- System: 9.1
- XY Auto: 1.1 (8227L)
- Ram: 1G
- CPU: A7 1.3 GHz x 4
- Resolution: 1024 x 600
- MCU: 3.5 (8227L)
Thank you in advance
None?
Honestly, the hu is oddball junk
I know I know, but prpbably there was a chance to do it