Related
bought this phone used and I don't think it was rooted but never checked, confirmed. Last night it turned off and will not turn on anymore..
Tried the pwr button for several minutes and no change. Plugged it in with several different cables and no change.
Any other suggestions or options? USB to computer detects something but says it can't install the driver.
Any ideas?
oNe
Can you enter to the bootloader menu? Maybe you can enter recovery and wipe the cache and dalvik
martinfarrell11 said:
Can you enter to the bootloader menu? Maybe you can enter recovery and wipe the cache and dalvik
Click to expand...
Click to collapse
negative, either the phone is totally dead or the screen is dead but NOTHING happens when pwr is pressed
here is what I have tried:
1. Press and hold PWR button for over 3minutes
- Plugged in and unplugged into ac - no change
2. Press and hold volume DOWN + Pwr for over 3minutes
- Plugged in and unplugged into ac - no change
3. Plugged into different a/c power outlets with 2 different chargers - no change
NOT sure what else to try or do?
Funny thing is if ya plug into a computer it does indeed detect "something'
However it says it can't load the USB drivers something about QU_***
Open to any ideas and suggestions.. WHILE I would love to get the phone working whats more high priority for me now is the 20gb's of pics that apparently did NOT back up.
oNe
Sean Price said:
Funny thing is if ya plug into a computer it does indeed detect "something' However it says it can't load the USB drivers something about QU_***
Click to expand...
Click to collapse
Funny thing is- that "something" is the solution to your problem. Capture the error message completely and search the 6P forums for that. Several threads on the "something" issue.
v12xke said:
Funny thing is- that "something" is the solution to your problem. Capture the error message completely and search the 6P forums for that. Several threads on the "something" issue.
Click to expand...
Click to collapse
Several threads with no solution. I went through the same "something" . Can't be fixed
v12xke said:
Funny thing is- that "something" is the solution to your problem. Capture the error message completely and search the 6P forums for that. Several threads on the "something" issue.
Click to expand...
Click to collapse
fixed that issue, aka QHSUSB_BULK is now working properly according to Device Manager.. but Nexus 6P is not detected, and doesn't even show up in Disk Management either.
Any other ideas?
please advise..
oNe
Sean Price said:
fixed that issue, aka QHSUSB_BULK is now working properly according to Device Manager.. but Nexus 6P is not detected, and doesn't even show up in Disk Management either. Any other ideas? please advise.. oNe
Click to expand...
Click to collapse
If you found the right EDL_9008 thread, there is Qualcomm software to download for your PC. If your phone is in the right downloader mode you can use the PC software with a special recovery.img. I don't know anything about it, just read through the threads long ago. It's a mixed bag with some success stories, some not. Keep looking though, I think you are on the right track. The original poster was "Tenfar" if I recall correctly. Good luck.
Try cleaning out the charging port.
Hi there,
I think we are in the same/similar boat. My phone shut off while using it (screen froze, then went black) and seems to have bricked itself. I *am* able to get mine to turn on, but only about once per day after it has been left plugged in for a few hours (although there is no indication it is charging while plugged in - never gets warm, no lights, etc.) I can get into recovery if I am lucky (usually get to the android bot laying on its back, then PWR+VOLUP just causes the phone to shut off instead of actually getting into recovery menu.) I've been able to clear cache/factory wipe from recovery menu with no luck. I never did unlock the bootloader so I am unable to use fastboot to do anything. I tried to flash a few OTA (full and incremental) images using adb when I am able to get into recovery, but they always failed in one way or another.
I've been trying the methods described in the 'tenfar' threads - using the xiaomi flasher and QPST tools. The xiaomi tool always fails for me. I have been able to get the QFIL tool to successfully 'download' about 3 times now, with tenfar's recovery images. However, after the success message, the phone doesn't do anything (I read in other threads it should reboot itself) - and after unplugging, the behavior of the device seems to be the same - just stuck and won't turn on at all.
Right now I think I am stuck in 'EDL' mode where the only evidence that the device isn't completely dead is that it shows up in device manager as 'Qualcomm HS-USB QDLoader 9008 (COM3)', and the factory imager tools do recognize it.
It *seems* like the only way forward is to somehow get one of these factory tools to flash the right set of files onto the device - I've tried a few now with no luck. I even tried extracting the relevant *.img files out of the google factory image download and replacing tenfar's image files with them. I was able to load those onto the device with QFIL. This morning my attempt at turning on the device has me stuck on the white google logo, which is new behavior for me - usually it shows the logo for ~5-10 seconds then the device powers off. I've left it on for a while stuck on the white google image, but I'm not sure if I'm doing anything useful here.
Here are my reference threads:
tenfar's 'debrick' thread
QFIL thread
If anyone has any crazy ideas, I am open to try them. Thank you.
Maybe disable big cores?
apples1678 said:
Hi there,
I think we are in the same/similar boat. My phone shut off while using it (screen froze, then went black) and seems to have bricked itself. I *am* able to get mine to turn on, but only about once per day after it has been left plugged in for a few hours (although there is no indication it is charging while plugged in - never gets warm, no lights, etc.) I can get into recovery if I am lucky (usually get to the android bot laying on its back, then PWR+VOLUP just causes the phone to shut off instead of actually getting into recovery menu.) I've been able to clear cache/factory wipe from recovery menu with no luck. I never did unlock the bootloader so I am unable to use fastboot to do anything. I tried to flash a few OTA (full and incremental) images using adb when I am able to get into recovery, but they always failed in one way or another.
I've been trying the methods described in the 'tenfar' threads - using the xiaomi flasher and QPST tools. The xiaomi tool always fails for me. I have been able to get the QFIL tool to successfully 'download' about 3 times now, with tenfar's recovery images. However, after the success message, the phone doesn't do anything (I read in other threads it should reboot itself) - and after unplugging, the behavior of the device seems to be the same - just stuck and won't turn on at all.
Right now I think I am stuck in 'EDL' mode where the only evidence that the device isn't completely dead is that it shows up in device manager as 'Qualcomm HS-USB QDLoader 9008 (COM3)', and the factory imager tools do recognize it.
It *seems* like the only way forward is to somehow get one of these factory tools to flash the right set of files onto the device - I've tried a few now with no luck. I even tried extracting the relevant *.img files out of the google factory image download and replacing tenfar's image files with them. I was able to load those onto the device with QFIL. This morning my attempt at turning on the device has me stuck on the white google logo, which is new behavior for me - usually it shows the logo for ~5-10 seconds then the device powers off. I've left it on for a while stuck on the white google image, but I'm not sure if I'm doing anything useful here.
Here are my reference threads:
tenfar's 'debrick' thread
QFIL thread
If anyone has any crazy ideas, I am open to try them. Thank you.
Click to expand...
Click to collapse
I have the 100% same issue. Screen froze,then went black and now its stuck in EDL mode. I need my data. Recovery access or anything else would be fine/enough for me. I have had LineageOS and TWRP on the device. With TWRP i can access my data.
How have you got your device on? Mine dont start once a day or so. Its always in EDL mode ( 9008 ).
ncc8uetou5et said:
I have the 100% same issue. Screen froze,then went black and now its stuck in EDL mode. I need my data. Recovery access or anything else would be fine/enough for me. I have had LineageOS and TWRP on the device. With TWRP i can access my data.
How have you got your device on? Mine dont start once a day or so. Its always in EDL mode ( 9008 ).
Click to expand...
Click to collapse
Sorry bud - I never was able to get any further than when I posted this. I eventually gave up, got a full out of warranty refund through my CC after the manufacturer wouldn't help me at all, and upgraded to a Pixel XL. I still do have the device, I should try to boot it up again . I didn't have any data concerns on my device so I was able to give up... good luck!
Hello everybody,
First off, I hate people who don't search on google before making a post, I have been searching for 4 days and I feel that it's appropriate to ask now.
I will make 2 parts to this thread, one will be a very fast explanation of what I did and the second part will be the same but a very thorough with a step by step process of what I messed up...
TL;DR: I was tired, late in the evening I flashed for some reason a Partition table of a Mi Note 3 on my Mi A1... I am now bricked and cannot access anything, fastboot, ADB, recovery nothing! I guess my phone is in EDL mode cause when I plug it in it flashes its led. "Qualcomm HS-USB QDLoader 9008" Is what I see in my device manager.
What do? oh, I forgot! I cannot access anything through any combination of buttons. I am stuck here, where I am!
The full thorough explanation for people who are bothered to read fully. (Includes my excuses for making noob mistakes, might be fun to read idk.)
Young me on a Sunday evening decides to reinstall magisk but this time with twrp cause I did it without twrp (yeah yeah I know). I was left without OTA's and after uninstalling anything that had something to do with Xposed or magisk I trashed it all. and stupid me thought that maybe? maybe? just maybe deleting Dalvik Cache would help me get my OTA's back after injecting my original ROM. This is where the fun begins.
I was not wanting to go through reinstalling magisk and all that to wipe the Dalvik Cache, I thought that that was my mission now, so I decided to search for methods that don't require root or being in the system, so some kind of fastboot or ADB command or something idk. I tried installing twrp and without my understanding that failed miserably and then I read some post where someone said that they flashed a mi note 3 partition table on their phone and something worked. Being the naïve little boii that I am, let's do that hey? Bam! bricked! I read somewhere I can open the phone and remove the battery and not having the tools is a mess, having to ask friends for some and voiding my warranty for something that probably won't work and after reading I understood that I'm in "EDL 9008 recovery" or something like that. I cannot boot into anything, I only have EDL 9008 to work with. I tried using Xiaomi's flasher tool and it would never respond to the initial hello packet (duuhh! I can't use ADB nor fastboot).
I know that this was stupid, I know! I learnt my lesson. If there is nothing we can do can I at least somehow get my internal storage data back? I deleted the backups from google drive for a short amount of time but randomly 5hrs prior to this sad story. All I have safe are now my contacts.
I hope you guys have some ideas! I feel like I'm fked but maybe with EDL 9008, there is a little glimmer of light?
P.S. If you guys somehow get me into fastboot I can flash a correct partition table back. My PC has all drivers so I can do this!
Sincerely, Micheal.
There is a way although i did tried it yet.
First of all sorry for my English.
Download latest MiFlash tool and qualcomm driver, this package contain both but not latest MiFlash so you should download lastest version from official site.
https://www.fshare.vn/file/H3R8M6OMRP2R
Download lastest stock rom.
You will need a good USB type C cable, dont use the one come with phone because you dont want to cut it in half.
Yes, that exactly what i said. Cut it in half, there are 4 small wire (or maybe 5 with type C?), remove it outer plastic and reconnect them.
Join the green and black cable, like you short circuit them, then plug your phone into PC with that cable without release green and black, wait for 5 sec then seperate them, the green and black.
Check device manager on your PC, you should hear device connect sound and qualcomm HS-USB QDLoader show up under Ports.
Open MiFlash and try to flash it.
You may want to check this video, although it in Vietnamese but you should understand the usb cable part.
https://www.youtube.com/watch?v=d5-1I9rWTiw
Hi, interesting situation. What about following this guide: http://en.miui.com/thread-235865-1-1.html ?
Its for some other phone, but try instaliing some drivers and you may get some signal of life.
Very interesting
I have thought about doing this as I had an old type-c lying around that came with the phone (I use a beautiful cable I bought off amazon) and saw this method to flash but never tried it..
I'll give it a go thanks.
btw. Your English is good I understood everything
The second comment from TrueMS:
I already have all drivers installed and in the long post I said that I have a flashing led that indicates that i'm in EDL 9008, the phone isn't dead but it won't turn on with any driver
m1shka said:
Very interesting
I have thought about doing this as I had an old type-c lying around that came with the phone (I use a beautiful cable I bought off amazon) and saw this method to flash but never tried it..
I'll give it a go thanks.
btw. Your English is good I understood everything
The second comment from TrueMS:
I already have all drivers installed and in the long post I said that I have a flashing led that indicates that i'm in EDL 9008, the phone isn't dead but it won't turn on with any driver
Click to expand...
Click to collapse
Yes, thats what I meant. Well, I dont know how to help you, wish you luck. I remember how I flashed wrong ROM for my S3 Mini and it was completly trashed, I'm glad that Xiaomi gives us at least some signs of life and hope.
And btw. I would rather charge the phone somehow - I hope it charges even in EDL mode, because if your phone dies while flashing with MiFlash, things can be even worse.
EDIT: I also found this guide, you can try it out: https://forum.xda-developers.com/g4/general/guide-unbrick-via-external-sdcard-qfil-t3748946
Okay so now a major reply!
I have stated in the OP that I am already in EDL, there is no need for cutting the cable or installing any driver, I am in EDL 9008 I don't need to "try to get there" as i'm already there.
These guides failed miserably as I have already tried them, my phone "doesn't receive a hello packet" from my phone, as I can't use adb or fastboot, or recovery.
I'll download linux and give that usb method a go then
m1shka said:
Okay so now a major reply!
I have stated in the OP that I am already in EDL, there is no need for cutting the cable or installing any driver, I am in EDL 9008 I don't need to "try to get there" as i'm already there.
These guides failed miserably as I have already tried them, my phone "doesn't receive a hello packet" from my phone, as I can't use adb or fastboot, or recovery.
I'll download linux and give that usb method a go then
Click to expand...
Click to collapse
Wish you luck:
Something that is never mentioned is to disable driver enforcement, this time hello packet was successfully recieved and flashed... Hold your happiness, cause now EDL no longer works so I can't see it in any com port and i'm certainly still in edl cause of the flashing led. Only difference I see is that now the led flashes when I hold the power button??? hmmmmmmm
To clarify:
Can't boot
Device was flashed successfully
Com port on pc can no longer see phone even after reboot
adb still don't work (proves again i'm in edl)
I'm in an even stickier situation now, can't access with my pc hmmmm..
m1shka said:
Something that is never mentioned is to disable driver enforcement, this time hello packet was successfully recieved and flashed... Hold your happiness, cause now EDL no longer works so I can't see it in any com port and i'm certainly still in edl cause of the flashing led. Only difference I see is that now the led flashes when I hold the power button??? hmmmmmmm
To clarify:
Can't boot
Device was flashed successfully
Com port on pc can no longer see phone even after reboot
adb still don't work (proves again i'm in edl)
I'm in an even stickier situation now, can't access with my pc hmmmm..
Click to expand...
Click to collapse
did you try to hold more than 30 second ? and also , do you have flash log ?
m1shka said:
Something that is never mentioned is to disable driver enforcement, this time hello packet was successfully recieved and flashed... Hold your happiness, cause now EDL no longer works so I can't see it in any com port and i'm certainly still in edl cause of the flashing led. Only difference I see is that now the led flashes when I hold the power button??? hmmmmmmm
To clarify:
Can't boot
Device was flashed successfully
Com port on pc can no longer see phone even after reboot
adb still don't work (proves again i'm in edl)
I'm in an even stickier situation now, can't access with my pc hmmmm..
Click to expand...
Click to collapse
So did you flash official stock ROM? Because I dont understand why doesnt it work... btw. when you flashed the ROM, did you lock bootloader?
Cant be battery dead?
If you are on "Qualcomm HS-USB QDLoader 9008" you will be able to flash stock fastboot firmware. Flash it using MiflashTool. Normally Miflashtool will recognized it as COMXX, where XX is the number of the port.
It's the official rom for the march ota.
The phone works, apparently it was encrypting everything... and now as I interrupted it, the encrypting failed and I lost all my data.....
Phone works but could have been better.
Before I reset the phone to factory, as i cannot use it yet, is there any way to get anything personal back? or is it gone gone and just factory reset?
What I see after boot, the phone resets every minute
https://drive.google.com/file/d/13sARZzlf3vJZK6Mx4hil6lsXRUl7-r-K/view?usp=sharing
The button that is hard to see says factory reset
m1shka said:
It's the official rom for the march ota.
The phone works, apparently it was encrypting everything... and now as I interrupted it, the encrypting failed and I lost all my data.....
Phone works but could have been better.
Before I reset the phone to factory, as i cannot use it yet, is there any way to get anything personal back? or is it gone gone and just factory reset?
What I see after boot, the phone resets every minute
https://drive.google.com/file/d/13sARZzlf3vJZK6Mx4hil6lsXRUl7-r-K/view?usp=sharing
The button that is hard to see says factory reset
Click to expand...
Click to collapse
Good job mate, so that SD card method worked with Linux? Be happy that your phone is alive.
EDIT: Maybe consider locking bootloader? Try it if youre on official stock.
EDIT 2: By flashing that ROM I guess you lost all data, but you can try to boot in TWRP without installing it and browse in file manager to see, if there is any data.
TrueMS said:
Good job mate, so that SD card method worked with Linux? Be happy that your phone is alive.
Click to expand...
Click to collapse
No... I was going to do that tomorrow but I decided to disable driver signature enforcement which worked. This should be written everywhere if it's this important..
Is there still a way to get my internal data back? Question as well, in recovery "mounting" the data partition will that let me get everything back "mounting" the drive to the pc? or do i not understand what mounting is.
m1shka said:
No... I was going to do that tomorrow but I decided to disable driver signature enforcement which worked. This should be written everywhere if it's this important..
Is there still a way to get my internal data back? Question as well, in recovery "mounting" the data partition will that let me get everything back "mounting" the drive to the pc? or do i not understand what mounting is.
Click to expand...
Click to collapse
As I said, you can try it, but when I flashed my Nougat stock ROM, i lost all the data. Or you can boot into TWRP and connect with USB to your computer to see the data in phone.
Good that your phone is working now, as for the data, i once forgot to remove encrypt before flash custom rom, but when enter TWRP it will ask for old password to decrypt. Just enter your old pass then connect to PC, or use TWRP file explorer to copy your data to sdcard
GVN.Gallus said:
Good that your phone is working now, as for the data, i once forgot to remove encrypt before flash custom rom, but when enter TWRP it will ask for old password to decrypt. Just enter your old pass then connect to PC, or use TWRP file explorer to copy your data to sdcard
Click to expand...
Click to collapse
None of the passwords I used worked.. I just factory reset it, thanks alot everybody. And now I will be more careful, don't flash anything weird. And backup!
I understood why I can't get the data back, if android fails at the encryption it jsut deletes everything!
My fone also in 9008 please can you guide me
I did the same what you have and it's on 9008 my flashing is successful but still my fone is not opening help me
m1shka said:
It's the official rom for the march ota.
The phone works, apparently it was encrypting everything... and now as I interrupted it, the encrypting failed and I lost all my data.....
Phone works but could have been better.
Before I reset the phone to factory, as i cannot use it yet, is there any way to get anything personal back? or is it gone gone and just factory reset?
What I see after boot, the phone resets every minute
https://drive.google.com/file/d/13sARZzlf3vJZK6Mx4hil6lsXRUl7-r-K/view?usp=sharing
The button that is hard to see says factory reset
Click to expand...
Click to collapse
How did you fixed i'm stuck in EDL?
SevenSlevin said:
If you are on "Qualcomm HS-USB QDLoader 9008" you will be able to flash stock fastboot firmware. Flash it using MiflashTool. Normally Miflashtool will recognized it as COMXX, where XX is the number of the port.
Click to expand...
Click to collapse
i am in Qualcomm HS-USB QDLoader 9008 but i can't flash, it doesn't matter if the phone is on fastboot mode or turned off (i can't even turn it on)
i shut down my device by tapping power off. then removed sim card and sd card after screen went black. but when i tried to power on, it doesnt respond.. i tried holding the power button for 10s, it gives me a black screen and vibrates and instantly closes again.. so i cant boot into recovery, i cant boot to fastboot, and its unreadable on pc, it doesnt charge, no bootlogo, nothing. just bricked..
.
i dont know why, but it just bricked by itself.. i've been using mokee 9 date of 1/1/2020 thats the last update i installed, with add on su and everything was working perfectly and even if i reboot multiple times..
bootloader was unlocked so xiaomi centers wont help me..
how is it possible to make it boot again? i mean like wtf even happened? i did nothing.. i didnt flash anything and system was READ ONLY before powering off.. all i did was remove sim and sd cards... even after flashing mokee updates yesterday, it booted normally and idk what's going on..
any help?
EDIT: the phone's hard disk IC was damaged. I went to a tech guy and he changed it but then the motherboard broke entirely after flashing the qcn file for imei. Device out of warranty of course because of the damn bootloader. Thank you xiaomi for the great phone that only lasted one month before dying completely.
attempt 2
in attempt 1 i tried force reboot as mentioned, didnt work
attempt 2 : i tried force reboot while plugged to pc, this showed up
attempt 3
i tried to flash a new firmware, but device unreadable. must be on fastboot mode for mi flasher to be able to read it. im starting to lose hope.. the device is new though it makes me sad
on some topic of a bricked phone online, someone mentioned that he should try EDL mode, by cmd command FASTBOOT OEM EDL
so i tried it many times until it said successful. but still didnt fix anything, because it didnt actually boot into EDL mode, had to open my device physically and use test points. so attempt 4 failed
does this mean fastboot works?
after attempt 4, it said successful so if fastboot works like that then i can flash stock boot.img or something.. right? which image should i start with
forum
boody shaban said:
on some topic of a bricked phone online, someone mentioned that he should try EDL mode, by cmd command FASTBOOT OEM EDL
so i tried it many times until it said successful. but still didnt fix anything. so attempt 4 failed
Click to expand...
Click to collapse
this is the forum of the bricked phone similar to mine, except that i didnt try any flash like him it just happened randomly
https://c.mi.com/thread-2334646-1-0.html
attempt 5
attempt 5 failed, i tried flashing whole firmware one by one, i started with vbmeta, then recovery but it failed. idk what to do
notice
i have noticed that it only flashes small img files, if its 100kb or more it will fail. maybe due to device restart because the only way to make it read in fastboot mode is to force restart multiple times until it flashes. what to do now?
attempt 6
so according to this video
https://www.youtube.com/watch?v=yJoIiLE_w3w
he installed a driver (name in attachment) then refreshed on mi flash so his device became readable on mi flasher
i tried that but it didnt work.
final attempt.. out of hope
found the possible solution. its called a deep flash cable, i will just go to any tech guy and ask him for help.
see attachment for info.
boody shaban said:
found the possible solution. its called a deep flash cable, i will just go to any tech guy and ask him for help.
see attachment for info.
Click to expand...
Click to collapse
In order to enter test point / EDL / 9008 mode, you have to physically open your device and connect two points on the phone's board. Search on YouTube for Redmi 7a EDL. If you get to EDL mode, you can flash original stock firmware via MiFlash.
Reason for brick
cg730620 said:
In order to enter test point / EDL / 9008 mode, you have to physically open your device and connect two points on the phone's board. Search on YouTube for Redmi 7a EDL. If you get to EDL mode, you can flash original stock firmware via MiFlash.
Click to expand...
Click to collapse
Yes, I hate tearing up my device so I took it to a professional. He failed to open ADL but he did the 9008. Now he waits some kind of credit. Not sure if for the app to work or for the bootloader to unlock, although it was already unlocked but maybe somehow got locked..
Any way, expected reason for brick is either latest magisk module, or kernel tweaks..
I gave the device to a professional, but he also failed to flash it even with test point. He said he was searching for a file.. I dont remember its name, something like IMOH..
Now I need to know any possible reason that might brick my phone again to avoid it
cg730620
Click to expand...
Click to collapse
cg730620 said:
.
Click to expand...
Click to collapse
The app he used was called ultimate multi tools
test point attempt failed
i did the test point, booted to 9008 mode but still nothing.
i think i know why the phone got bricked by itself, it got ARB stands for AUTOROLLBACK
read more about it here https://mi-globe.com/unbrick-your-xiaomi-phone-without-authorized-mi-account/
bootloader got automatically locked again.
Never lock the bootloader if:
- your phone was delivered Chinese version and you flashed Global firmware
- your phone was delivered Global version and you flashed Chinese firmware
- you changed system, vendor, boot or recovery partition
- you installed a custom or modified stock rom
ARB isn't an issue with this phone I suppose. Because I was on 11.0.5 and rolled back to 10.2.5 without problems.
Have you tried MiFlash Pro?
See here:
https://forum.xda-developers.com/redmi-7a/how-to/miflash-pro-t4030809
---------- Post added at 04:01 AM ---------- Previous post was at 03:38 AM ----------
boody shaban said:
i did the test point, booted to 9008 mode but still nothing.
Click to expand...
Click to collapse
It seems that error is related to your computer. Reinstall drivers and MiFlash.
QDLoader Drivers:
http://www.mediafire.com/file/0jfq2r7adylnltu/QDLoader_HS-USB_Driver.zip/file
ADB driver:
http://www.mediafire.com/file/qskct06xyx1iivs/ADB%2Bdriver%2Bv1.17%2Blite.zip/file
MiFlash:
http://www.mediafire.com/file/bdjugf3zx7037yl/MiFlash2018-5-28-0.zip/file
Read about a similar problem here:
https://xiaomi.eu/community/threads/mi5-bricked-i-bricked-my-new-mi5-with-miui8.32439/
cg730620 said:
Never lock the bootloader if:
- your phone was delivered Chinese version and you flashed Global firmware
- your phone was delivered Global version and you flashed Chinese firmware
- you changed system, vendor, boot or recovery partition
- you installed a custom or modified stock rom
ARB isn't an issue with this phone I suppose. Because I was on 11.0.5 and rolled back to 10.2.5 without problems.
Have you tried MiFlash Pro?
See here:
https://forum.xda-developers.com/redmi-7a/how-to/miflash-pro-t4030809
---------- Post added at 04:01 AM ---------- Previous post was at 03:38 AM ----------
It seems that error is related to your computer. Reinstall drivers and MiFlash.
QDLoader Drivers:
http://www.mediafire.com/file/0jfq2r7adylnltu/QDLoader_HS-USB_Driver.zip/file
ADB driver:
http://www.mediafire.com/file/qskct06xyx1iivs/ADB%2Bdriver%2Bv1.17%2Blite.zip/file
MiFlash:
http://www.mediafire.com/file/bdjugf3zx7037yl/MiFlash2018-5-28-0.zip/file
Read about a similar problem here:
https://xiaomi.eu/community/threads/mi5-bricked-i-bricked-my-new-mi5-with-miui8.32439/
Click to expand...
Click to collapse
but im sure i have all drivers installed in fact i used mi flash more than once and it worked perfectly fine, and i swear i didnt try to lock it or anything, what happened is, mokee auto updates installed add on magisk and it was the latest version so i think this might have bricked it. idk..
ok i downloed all the drivers and reinstalled them, same error : "library not registered"
Good evening! I hope you can help me.
I flashed LineageOS 14.1, but I wanted to go back to EMUI. I made all the wipes and tried to flash different stock firmwares through a forced update (volume buttons + power button), but it never worked. At that point, I read about a guy in this forum who suggested to create a flashable zip with Huawei Update Extractor: I followed the suggestion and tried to flash it with TWRP. No error was given, but when I tried to restart, TWRP told me I had no OS installed. I thought it was strange, so I tried to restart anyway. That's when I got in rescue mode. I can't get into the recovery and I can't use fastboot. What rescue mode shows me is:
RESCUE MODE
Attention!
Please update system again
Update User Guide:
*link*
*android avatar*
Error!
Func NO: 10 (boot image)
Error NO: 2 (load failed!)
Pressing the three buttons, I'm able to force an update. The problem is I can't find a firmware that doesn't get rejected. With Lollipop firmwares, it starts to install, but it fails at 12%. With Marshmallow ones, the installation process doesn't even start.
What can I do to make it work again? I'm very sad because this phone was gifted to me a couple of days ago and I already messed it up. I don't even know how to turn it off.
What can I do to get in fastboot mode? At that point, what should I do to flash the stock firmware? Or maybe do I need to find the first stock firmware ever installed into this phone to make the forced update work?
Please, I need help. Thank you in advance!
P.S. The phone's model is ALE-L21. I live in Italy, so I assume it's a European version.
Did you managed to fix this?
Jhon_Locke said:
Did you managed to fix this?
Click to expand...
Click to collapse
Not yet, but I'm working on it. I found out that the device is recognized by my PC if I follow these steps:
1. Connect the phone to the PC and wait for it to go in rescue mode;
2. Wait until the notification LED stops to blink;
3. Disconnect the USB cable;
4. Press volume - and power button;
5. Reconnect the cable.
At that point, the screen turns black and the phone is recognized as "㌲㔴㜶㤸". I installed the drivers and now it's recognized as "HUAWEI USB COM 1.0". I should be able to reflash the partitions and make my phone work again, but I'm still trying to understand how to do it correctly.
Any help is appreciated!
ErikChimello said:
Not yet, but I'm working on it. I found out that the device is recognized by my PC if I follow these steps:
1. Connect the phone to the PC and wait for it to go in rescue mode;
2. Wait until the notification LED stops to blink;
3. Disconnect the USB cable;
4. Press volume - and power button;
5. Reconnect the cable.
At that point, the screen turns black and the phone is recognized as "㌲㔴㜶㤸". I installed the drivers and now it's recognized as "HUAWEI USB COM 1.0". I should be able to reflash the partitions and make my phone work again, but I'm still trying to understand how to do it correctly.
Any help is appreciated!
Click to expand...
Click to collapse
fastboot detects your device when you plug it into your computer?
I mean, if you run "fastboot devices" it shows your phone?
I've had this same problem but with an P8 Lite 2017, after flashing some ROM that supposedly was the stock one and trying to flash recovery I ended up with my phone bootlooping into rescue mode, I was able to "bypass" this thing rebooting my phone like crazy, seriously like after 20 reboot it finally booted into the damn ROM and I never touched the phone again. Sometimes when the phone ran out of battery and tried to power it on the phone booted into rescue mode and again after some reboots it booted to Android but now I want to install a custom ROM or at the very least root this damn phone so that's why I'm asking you if you have solved this, if you do then probably if I follow the same steps I would be able to fix that screen, hopefully.
If you are able to flash something start with flashing all recoveries your update.app has, maybe that's the problem (at least in my phone it is).
Jhon_Locke said:
fastboot detects your device when you plug it into your computer?
I mean, if you run "fastboot devices" it shows your phone?
I've had this same problem but with an P8 Lite 2017, after flashing some ROM that supposedly was the stock one and trying to flash recovery I ended up with my phone bootlooping into rescue mode, I was able to "bypass" this thing rebooting my phone like crazy, seriously like after 20 reboot it finally booted into the damn ROM and I never touched the phone again. Sometimes when the phone ran out of battery and tried to power it on the phone booted into rescue mode and again after some reboots it booted to Android but now I want to install a custom ROM or at the very least root this damn phone so that's why I'm asking you if you have solved this, if you do then probably if I follow the same steps I would be able to fix that screen, hopefully.
If you are able to flash something start with flashing all recoveries your update.app has, maybe that's the problem (at least in my phone it is).
Click to expand...
Click to collapse
No, it doesn't show anything if I write that command...
I guess mine won't ever boot into the rom because it seems like there's no system installed. I made some researches and found out there are some softwares that let you reflash the partitions IF the phone is recognized as "HUAWEI USB COM 1.0". I'm still trying to figure out how to do it correctly though. I feel like if I do something wrong, then my phone won't probably turn on again.
In your case, you should be able to flash a custom rom without any issue. You just have to be very careful and inform you as much as you can: I don't want your phone to end up like mine?. Anyway, it seems pretty hard to go back to the stock rom, so think about it before you flash a custom rom. Also, make a Nandroid Backup is very important.
Hi, and please tell me there's something that can be done to help. I have the AT&T V35 and was really happy to see the bootloader was unlockable, so I went ahead and downloaded QFIL and thought I was following the step by step directions for putting it into the correct download mode. There were no issues at all, but I did have a few more things open on my laptop that were partially covering the directions that could have led to my problem. There was a part of the directions where there are 6 or so partitions that needed to be backed up and substituted, I only saw 2. That's when I thought I was finished and proceeded to reboot the phone, having only 2 of the partitions saved and that caused me issues because now I can plug the phone into any USB port and the computer doesn't even recognize anything there. Also the top left corner just says "..ANY BUTTON TO REBOOT PHONE".
I think if I could get it into download mode or something I could at least reflash the .kdz file and replace the damaged firmware with good firmware, but I got to get the drivers to recognize the phone even being plugged into the USB port first. It seems like I'm going to have to repair it with Octoplus at this point, but maybe someone here has a better option, as I do not have the Octoplus or any other JTAG equipment to use. Any thoughts?
This has been answered by several people, if you can search the forum. In the original root thread, OP cmrntnnr (original post) and vlad48 (post #11) talks about it. I also provided some information regarding this in post #74. If you get stuck post in the thread instead of private message so others can see it. Make sure you thank the contributors. Here is the thread link:
https://forum.xda-developers.com/lg...loader-unlock-root-instruction-t4052145/page8
Edit: Also, you shouldn't need Octoplus or JTAG since the engineering bootloader is out and QFil can be used to fix almost any state the phone is in. Just follow instructions to get in QFil mode (may take several tries because it is tricky, hard key combination), flash the files for abl_a and laf partitions, you can use the ones i provided. Just remember once bootloader and laf partitions are restored, even if phone can't finish booting, you can still put it into download mode by holding the vol+ button while plugging in the USB cable.
ELutts said:
Hi, and please tell me there's something that can be done to help. I have the AT&T V35 and was really happy to see the bootloader was unlockable, so I went ahead and downloaded QFIL and thought I was following the step by step directions for putting it into the correct download mode. There were no issues at all, but I did have a few more things open on my laptop that were partially covering the directions that could have led to my problem. There was a part of the directions where there are 6 or so partitions that needed to be backed up and substituted, I only saw 2. That's when I thought I was finished and proceeded to reboot the phone, having only 2 of the partitions saved and that caused me issues because now I can plug the phone into any USB port and the computer doesn't even recognize anything there. Also the top left corner just says "..ANY BUTTON TO REBOOT PHONE".
I think if I could get it into download mode or something I could at least reflash the .kdz file and replace the damaged firmware with good firmware, but I got to get the drivers to recognize the phone even being plugged into the USB port first. It seems like I'm going to have to repair it with Octoplus at this point, but maybe someone here has a better option, as I do not have the Octoplus or any other JTAG equipment to use. Any thoughts?
Click to expand...
Click to collapse