Hello all,
i know there are a few topics on this matter but none are able to answer my question.
So i want to access adb but the screen is shattered. The only information i want to extract is the contacts and if its working photos but they are less important.
So i'm able to boot into download mode (or its detected in heimdall) but i dont want to flash TWRP as i can't navigate it correctly.
I know that i might be able to use TWRP to access adb but is there any other way that i can achieve that?
The phone model is sm-j510fn or so i think as the only other one that i've encountered was with this model. (country Bulgaria)
I'm not sure how to extract more info from the phone but i know that the developer options weren't even unlocked soo .. yea i'm a bit stuck.
Just an FYI no screen replacement can be made as this phone was already replaced but google accounts sync didn't work on the new one and recovered some odd contacts.
Thank you in advance!
Related
Hi, I'm sorry if this isn't the right place to post this but Im having to use someone else's windows phone and its hard to navigate through the site.
My problem is that I tried to root my s6 edge plus using an application called King Root. The install got to 17% and then turned the phone off. When I load the phone up now I just get the message "custom binary locked by FRP lock" in red writing and the phone instantly boots off.
Is there a way to get around this without losing my data on my phone? I have some very important photos that are on there that I really don't want to lose, unfortunately nothing is backed up. I've been researching and apparently this is possible using a programme called Odin? I hope this is possible as I don't want to lose my stuff on my phone.
Any help would be great, thank you.
To be brutally honest if you haven't heard of Odin and you're using Kingroot, you're way out of your depth and you shouldn't be even thinking about rooting your device.
Not being nasty, sincerely. But you need to do a LOT of research.
The only way to rescue your device is to flash a stock firmware via Odin. There are guides on this site, read them and then read them again and again. Your photos are probably gone unfortunately. I would say definitely, but mircles can happen..
Good luck!
Maybe just flashing the stock bootloader may help but once you atart flashing the pda i think your photos may be gone. Unless where ever they are stored doesnt get over written they may be recovered uisng a data recovery app on the play store like gt recovery and the deep scan option.. it still finds photos from 5 new rom installs on my opo
Hello experts!
First off I do admit I have cross posted some information here. Perhaps I should have just asked here first. As a lot of research I have been doing lead me here. I am also aware of the XY problem. So I am giving what information I have on my problem and what I have done to resolve it. In a nutshell I need to recover app data from internal storage.
So here is yet another story of a dropped Samsung Galaxy BSOD. The broken screen of death! :-o
So I dropped my phone and the screen broke, fixed it then put on a screen protector that fractured the new screen in my pocket, of all things. Through that it spiraled out and it needed a new LCD as well as screen which failed to repair as LCD remains blank now. I suspect the display controller has somehow fried. Decided to give up and buy a new phone.
My broken phone is a Core Prime G360G. The digitizer doesn't respond. The LCD is blank. The side buttons, volume, power and home, work fine.
The good news. It turns on and technically still works. It has no screen lock. I can plug it in to computer via USB and it mounts over MTP. I can also install apps remotely (so to speak) from another computer from the Play site. I've installed Samsung Switch this way. Switch does work and I managed to back up files from the Windows program which is good but in my case it isn't smart enough as it doesn't back up app data which I need. I also have AirDroid installed and can reach it that way I but didn't enable mirroring before the incident. Trying to use that to download an app (~10MB in my case) just results in the browser stalling.
The bad news. It is not rooted. It has stock standard firmware. USB debugging is not enabled. Last time I tested OTG wasn't supported. At least not for OTG USB sticks.
So in effect it's rooted without being rooted! Yes, i know, I know, Android rule of thumb; before you accidentally drop your phone, even without planning it, and not being a seer, enable USB debugging for no apparent reason! It all makes sense now.
I've spent the last two weeks reading forums all over the place, blogs and watching videos about how to recover data with a broken screen. And in almost all cases they tell you to enable USB debugging. Well that's nice advice and about as useful as advising someone with a broken toilet to sit down, do their business and then flush it! And is met with equally crappy commentary pointing the conundrum out.
My computer has Windows (Vista) and Linux (Mint 64). I read all about ADB and installed this on both Windows and Linux. And tried to talk to it that way with adb and fastboot which failed. I then read of Samsung devices being different, with a download mode, and using this Odin or Heimdall program. So I could "see" the process I tested with my new phone (a J5 Prime as it happens) and learned I needed to use download mode and how to enter it on boot. Recovery mode didn't work as expected. Heimdall was the only program that would work. I managed to view the PIT on my J5. Odin did see my phone but I found the interface harder to work with at first.
I tried on my Core. Blindly got it into download mode. Heimdall could see it. But the transport was buggy as I kept getting USB errors. I ended up removing it then compiling Heimdall v1.4.2 from source. This worked better, even though it was giving empty bulk transfer warnings, but it managed to download the PIT file. So at this point I can blindly get my Core into download mode and am able to communicate with it using Heimdall.
This is where I am at. I would prefer it if a screen mirroring app could be installed that would load up and activate remotely when a client run on my computer is loaded up. I don't care if it is VNC or how it connects. But it would need to load itself up on the phone and work without needing intervention on the phone and without USB debugging. If there is an emergency mirroring app on the Play store or even an APK that can be installed remotely, using AirDroid or any other means, I would be happy to test it. I'd write one myself if knew how to write an app! LOL.
If USB debugging could be enabled by any remote means then I am welcome to hear how. It opens a window to possibility. But a window that is hard to open if it's locked.
So I would prefer to keep this at the app level if possible. Since apps can help. But if need be as long as it doesn't destroy data I am willing to install a custom recovery image. It looks like I will need to do this as I have exhausted all other possibilities. At least, when I read of the latest broken screen mirroring app, there is always a catch of it needing debugging or activating on the phone.
Although there is support for other Core Prime variants, support for my specific G360G model seems to be lacking. The information I read looks vague at best. I read about CWM and TWRP. But on the TWRP site, although there is Core Prime images, nothing is listed for exactly a G360G. There is no point to me flashing TWRP recover image only to find it doesn't work and I have bricked recovery mode. I'd look like a right twerp!
So guys, after all the info I have given you, what's the next step? Thanks.
Okay so just an update here. I have some good news and bad news on my part. I've been hacking around with customising recovery and modifying compatible recovery images in order to get debugging activated.
The good news is I got USB debugging enabled. The bad news is my computer is unauthorised.
I'm stuck at this point. I updated the adb_keys file with what was on my computer and it won't budge. I finally get somewhere and now I've once again hit a wall. This is just so annoying. :-x
The final countdown. After months of cracking and hacking I've broken in! I modded my hack to create the needed folder just to be sure and updated my RSA key. Applied the firmware patch and let it reboot. Even while booting I knew something was different. The digitizer started responding to my touch and making water noises. Which was strange as I never noticed it doing that before.
I issued an adb command and it was accepted. I could then browse around the system. I already had screen mirroring software installed and all it needed was USB debugging working and suddenly it worked. This was a blessing as I found that trying to do other things like going into a root shell or do an adb backup caused a requester to come up on screen. Had I not been able to satisfy that on a virtual screen I would have run into the same trap of circles I had just climbed out of. Having a rooted phone with no root access.
I was then able to install a backup app and extract the data out. Hooray! I had actually installed it from Google Play site remotely but found there was no space for it and it had failed. But the account said it was installed. With a view to a mobile I could then remove another app and install it from Play on the phone itself. Given how well this worked once I learned what was needed to be done I suppose I should make up a guide. An automated script to create an ADB patch wouldn't go far astray.
Hello, short Story before. I got a full Hand of non working mobile phones because being full of a hell of viruses.
5pcs. younger ones.
2 Huaweis and 3 Samsungs.
Well so far 4 PCs. are saved.
Getting into the phone wasn´t possible anymore. Data not important so I resettet over the Buttons to original Status. -> Worked fine.
But one Piece which is a Huawei P9 Lite guess it is a single sim? was the button method not possible cause it wanted a Software update and Installation of WLAN failed (EMUI)
Getting into the phone for any informations was also not possible because of all the viruses and not working right ahead anymore.
Well ok -> will use High Suite for stock Firmware -> this mobile phone is not supported and also couldn´t activate MTP as I am not in the phone. So far.
Next Idea -> ok. will take the C900B300 and go back to Marshmallow. From original HUAWEI site.
Took the European Version in German. Did it over EMUI (hold 3 Buttons) and worked so far but when I turned on I was stucking on the WIFI+. Even pressing the button -> further nothing anymore. So I thought -> maybe another stockfirmware useful.
Again C900B300 and then I think I did the big mistake. Took out the sdcard during it was rebooting (HUAWEI was already visible) and now it is big crap. Stucks at HUAWEI. Turning off not possible. This EMUI is not possible anymore. Just with a trick I am able to get into fastboot. Yeah. But what then? Reading TRWP which I know from Samsungs but putting it on with ODIN. ODIN doesn´t work with Huawei. Do I Need TRWP to get it back to normal Firmware? Mobile phone was never customized or anyhting else. just normal stock was on it and is the wish to get a clean back. Resetting to factory was not possible anymore.
So my questions, even I know it is my fault. Any rescue possible?
What could be the best stock Firmware. I Guess it is a single sim from Austria unlocked and unbranded. Would also take Nougat again. Just wanted to get it back to normal working and now I guess I have a big letter holder. Model from the backside is VNS-L31. More I don´t have.
Thanks a lot for any help for my being an idiot. Samsungs are much more easier than HUAWEIs.
Blimey mate,
This really just boil down to what partitions were damaged in your case- Most likely your system and data,
however since you are still Technically running unmodified emui you could manage to sort of salvage it.
The logic is this:
Most custom roms for the p9 lite build on top of emui (patching the system image) rather than replacing it (like the way samsung smartphones do)- so you could flash the rom, it would wipe your phone clean of viruses in the process and then proceed to do a hard restore back to emui.
1.) get your phone into fastboot and flash this twrp http://www.meticulus.co.vu/p/forum.html#nabble-td27
2.) Then flash this rom : http://www.meticulus.co.vu/p/ressurection-remix-for-hi6250-devices.html MAKE SURE YOU FOLLOW THE INSTRUCTIONS ON THIS SITE VERY CAREFULLY
3.)Follow this guide to do a hard restore https://forum.xda-developers.com/huawei-p9lite/how-to/tips-revert-custom-rom-to-official-t3668413
good luck!!! if you have any questions hit me up!
Hi
Hi Exiatron00,
thanks a lot for your maybe solution way. Will do it this evening after work and come back.
Hopefully it works cause as mentioned in other threads -> don´t think that the original owner opened the Debugging so that I can work over a tool. FRP locked is in fastboot. This was already mentioned in other posts which I have read here in the forums.
Thanks for your step by step explanation. Will do it. Hopefully it works. I am really pissed of my own that i was unpatient with the sdcard. That´s a mistake which shouldn´t happen. Anyway it did. So i will try to do everything to get back working again. I am from IT so I am not such a DAU but newbie with HUAWEIs. Most are Samsungs.
Will give Feedback.
CU
If u need to transfer files , just boot into twrp (it has built in mtp support) , then transfer the file from ur PC to phone via a micro us b cable.
If you are unable to fix the phone I do actually have a FULL twrp backup of my phone (EMUI 5- single sim Europe VNS- L31 C432B370) hit me up if u want it.
Hi,
well adb for flashing not working as device not found. Hi Suite installed. Guess that the USB Debugging is not enabled. hrmpf.
There is a similar thread of somebody with no enabled USB Debugging.
https://forum.xda-developers.com/nexus-4/help/fastboot-recovery-remotely-enable-usb-t2177440
He writes an solution how to enable in fast boot mode with using N4 toolkit.
Search for a p9 lite toolkit and found this
https://forum.xda-developers.com/hu...nt/europe-vns-l31-toolkit-bootloader-t3432873
may could work?
Big **** -> as Long as USB Debugging is not enabled as Long I am not able to Flash TWRP over adb.
If I connect to PC Hi Suite opens automatically. So driver should be fine as pc recognize the phone.
hm?
Got it working somehow
Exiatron00 said:
If u need to transfer files , just boot into twrp (it has built in mtp support) , then transfer the file from ur PC to phone via a micro us b cable.
If you are unable to fix the phone I do actually have a FULL twrp backup of my phone (EMUI 5- single sim Europe VNS- L31 C432B370) hit me up if u want it.
Click to expand...
Click to collapse
Hi Exiatron00,
got it working somehow!!!!
Bought a 3 day licence for DC Phoenix where you are able to put Firmware even in fastboot with FRB lock and no USB Debugging on.
So I got the IMEI and Fitting Version which is a L11.
Downloaded it original from Huawei as I still want a original stock Rom not customized which was
HUAWEI P9 Lite Firmware (VNS-L11, Android 6.0, EMUI 4.1, C432B161, WEU) only wokring one.
BUT the big Problem is that the apk Android System Web View is missing in the ROM. A known Problem by HUAWEI. Yeah now I am stucking in the Setup wizard like this guy who mentioned also the solution whell the reason of this Problem.
https://forum.xda-developers.com/hu...stuck-initial-setup-upgrade-to-t3498097/page2
So my question now. How do I get the apk on the phone still no USB Debugging? Does anyone have this Version original incl. this apk? Maybe an img. from a running working System?
Only way I am able to put the Firmware on is DC-Phoenix. It is valid still two days. Maybe someone can help me? Please?
So an Image of VNS-L11, Android 6.0, EMUI 4.1, C432B161, WEU incl. Android System Web View, so that I can go ahead and use the phone again please?
Thanks a lot.
Kind Regards.
Hello everyone,
Im in a bit of a pickle and hope someone here can help?
bought a g930p off second hand site, but when got home to fire it up there was the google reset protection on it (FRP), thought no hassle ill just wipe the phone and why not updated it to the latest while at it, so grabbed the latest files (8.0) and flashed the lot with odin, silly me thought this would just clear the phone totally including the FRP, anyway back to stage one of a phone that i cant use,
what ive tried:
z3x tool (asks to start adb, have adb started from platform tools dose nothing)
tried downgrading to 6 to try the OTG cable trick, wont let me downgrade
ive tried a few methods on here as well, but none seem to work anymore, so dose anyone know how to get past this with 8.0 installed ?
Thank you
Also i see there is a twrp for the Exynos version, is there version for the Qualcomm (g930p) version and would that help removing the FRP ?
Guess i should follow up on this, I ended up taking it to a phone repair shop, i asked how he did it and he didn't want to tell me.
So i guess this post is for anyone searching for a solution, wont find it in this thread sorry.
speaker_ said:
Guess i should follow up on this, I ended up taking it to a phone repair shop, i asked how he did it and he didn't want to tell me.
So i guess this post is for anyone searching for a solution, wont find it in this thread sorry.
Click to expand...
Click to collapse
Well what they do is flash a modified SBOOT or Aboot file with adb enabled (because when you're on the setup assistant thats not enabled; you have to go to Developer Settings and blablabla and offcourse that's impossible at this time) then use Z3x to disable frp.... other method used is flashing combination firmwares (these are special FW that are used by the Samsung Engineers that comes with ADB and other usefull things for debugging, but make the phone unusable for everything else) and then the same thing using Z3x or Octopus Box; but I really don't know if theres a Combination FW for Bootloader 8.
Good day
i come to you with a story that many of you might have heard,
Good friend of mine passed away last weekend in a motorbike accident his funeral was today 11/17/2018
His wife asked me today if i can help remove the Patten lock of his phone as she wants to get the photos of the daughters play of the phone
she knows his Patten lock for all of his other phone but this one is different for some reason, because she knows everything the steps i have tried is as followed
1. Samsung account to remotely unlock the device ( S8 was not registered with the account ) only the S4 that was stolen many years ago
2.Google find my device i don't see an option there
3.looked thru all 5 email account including the outlook account nothing there ( We played online together as well)
things i know because i have been at this all day
( I have Googled this ) all my phones are rooted and have a custom recovery
His phone was never Rooted, no custom recovery, i highly doubt he had OEM unlock usb debugging etc
please can someone point me i the right place or help me if its even possible
thanks all for taking the time to read this
PS. The lock Screen does not have a option to use the gmail via recovery, again thank you all
Go into download mode (vol down, bixby and power on at the same time) to check if he really never had OEM unlocked.
It's a worth try it.
If he had, you could easily flash TWRP and recover the files.
If not it's a tough nut to crack.
I will brainstorm a little bit.
T3L3P4TH said:
Go into download mode (vol down, bixby and power on at the same time) to check if he really never had OEM unlocked.
It's a worth try it.
If he had, you could easily flash TWRP and recover the files.
If not it's a tough nut to crack.
I will brainstorm a little bit.
Click to expand...
Click to collapse
Thanks for the quick reply i have done that, OEM is locked
Okay then, we need a different angel of view.
Did you try common numbers out of his life?
Such as birthdates, special events from children/wife, banking pin, something like this?
The other method would be to reflash the firmware via odin, unlock OEM, flash TWRP and then recover the pictures with DiskDigger Root Access.
The problem in this method is, that it isn't guaranteed that it works.
I consider this as the last chance, if everything else fails.
You wrote that you don't have any restore options in pin menu.
Is there anything else that could help or that you can tap?
Any Options or so?
A diagnose from far away is not that accurate of course and really would like to help.