Hi all. I open this thread because I have a Redmi Note 7 which in Xiaomi Spain (the website) stated that it had 4G +. I've been testing for months and only have 4G + with the b3 and b1 bands. Does anyone know if this problem can be solved? I am in Spain where there is 4G + with 1800 + 800 and other bands and I am not able to connect to them.
oneperson said:
Hi all. I open this thread because I have a Redmi Note 7 which in Xiaomi Spain (the website) stated that it had 4G +. I've been testing for months and only have 4G + with the b3 and b1 bands. Does anyone know if this problem can be solved? I am in Spain where there is 4G + with 1800 + 800 and other bands and I am not able to connect to them.
Click to expand...
Click to collapse
You're using stock or custom ROM? If custom ROM then it is probably a bug.
Here's a screenshot of my phone running Bootleggers ROM with 4G+ enabled https://imgur.com/gallery/GLZ8Go7
Related
Got a xiaomi redmi note 4g LTE to play with but unfortunately device only supported FDD-LTE band 1, 3 only. Needed band 2, 4 and 7 to be able to work with tmobile USA LTE network. Any ideas on how to add those values to the phone?
blackysan said:
Got a xiaomi redmi note 4g LTE to play with but unfortunately device only supported FDD-LTE band 1, 3 only. Needed band 2, 4 and 7 to be able to work with tmobile USA LTE network. Any ideas on how to add those values to the phone?
Click to expand...
Click to collapse
No you cannot unlock bands. Bands are hardware based.
marbss said:
No you cannot unlock bands. Bands are hardware based.
Click to expand...
Click to collapse
the hardware was supported. It's a Snapdragon 410 chipset with 4G LTE world mode. it's Xiaomi who didn't add those bands into the baseband modem. I read some XDA threads about unlocking all LTE bands for Qualcomm Snapdragon chips but I couldn't understand how to add thoae NV values and how to get into the USB settings mode in my Xiaomi device. I need someone with experience to look into this and maybe make some step by steo guide for us. Its been done b4 with oneplusone, oppo, Sony, LG, Samsung phones with success so I knew it could be done.
ok i could be wrong. My friend just brought a moto x to australia and used a process or update to open up some more bands on his phone .
similar to this discussion http://forum.xda-developers.com/showpost.php?p=58064666&postcount=16 ???
Install mokee opensource
Sent from my HM NOTE 1LTEW using XDA Free mobile app
jagbir89 said:
Install mokee opensource
Sent from my HM NOTE 1LTEW using XDA Free mobile app
Click to expand...
Click to collapse
The ROM actually unlocks more LTE bands?
jagbir89 said:
Install mokee opensource
Sent from my HM NOTE 1LTEW using XDA Free mobile app
Click to expand...
Click to collapse
I'm having the same issue. Is this a solution?
gqkevyn said:
The ROM actually unlocks more LTE bands?
Click to expand...
Click to collapse
Don't know if you're still wondering, I found out there are two versions of this phone. One is Chinese the other is a Hong Kong version. The Hong Kong version comes out of the box with compatible T-Mobile 4g lte band.
Sent from my Nexus 6
---------- Post added at 12:55 AM ---------- Previous post was at 12:47 AM ----------
gqkevyn said:
The ROM actually unlocks more LTE bands?
Click to expand...
Click to collapse
Oh, and as for ROMs unlocking lte bands. I would try the MIUI 5 global ROM. I haven't had a chance to test myself yet but, I would give it a shot. It's the ROM the Hong Kong version comes with out of the box.
Sent from my Nexus 6
Homer J. Fong said:
Don't know if you're still wondering, I found out there are two versions of this phone. One is Chinese the other is a Hong Kong version. The Hong Kong version comes out of the box with compatible T-Mobile 4g lte band.
Sent from my Nexus 6
---------- Post added at 12:55 AM ---------- Previous post was at 12:47 AM ----------
Oh, and as for ROMs unlocking lte bands. I would try the MIUI 5 global ROM. I haven't had a chance to test myself yet but, I would give it a shot. It's the ROM the Hong Kong version comes with out of the box.
Sent from my Nexus 6
Click to expand...
Click to collapse
how about TDD LTE version? with 2600mhz...i wondering can use it in my country...there's 2 version about our phone,FDD lte and TDD LTE...FDD LTE 1800/2100mhz...and i got TDD version...
Mayoz said:
how about TDD LTE version? with 2600mhz...i wondering can use it in my country...there's 2 version about our phone,FDD lte and TDD LTE...FDD LTE 1800/2100mhz...and i got TDD version...
Click to expand...
Click to collapse
I'm sorry, I'm not too familiar with lte bands outside of the US. However you should check out this forum for the Redmi Note 4g. It's where I got most of my info from.
http://en.miui.com/forum.php?mod=forumdisplay&fid=66&mobile=2
Sent from my Nexus 6
Can I unlock bands with Mokee?
Meerk4t said:
Can I unlock bands with Mokee?
Click to expand...
Click to collapse
I'm still not sure it's possible. I've searched and most people say it's hardware based and ROMs can't change it. If you're already rooted and have custom recovery, you might as well give it a shot and report back.
Sent from my Nexus 6
Same problem here. My carrier uses a LTE frequency not supported by phone. All other carriers are supported, mine is not, frustrating. Installing Mokee (or any other custom ROM, I tried them all) doesn't change a thing. I don't know about MIUI, but don't think it would work.
blackysan said:
the hardware was supported. It's a Snapdragon 410 chipset with 4G LTE world mode. it's Xiaomi who didn't add those bands into the baseband modem. I read some XDA threads about unlocking all LTE bands for Qualcomm Snapdragon chips but I couldn't understand how to add thoae NV values and how to get into the USB settings mode in my Xiaomi device. I need someone with experience to look into this and maybe make some step by steo guide for us. Its been done b4 with oneplusone, oppo, Sony, LG, Samsung phones with success so I knew it could be done.
Click to expand...
Click to collapse
How is it going now? Have you successfully unlocked B7
I want to unlock B20 and went through all the steps from this guide but no luck
But I did LOCKED B7 which is available originally on my Mi NOTE (dual-sim) to see if the value I set into 6828 is working.
you can have a go to unlock B7 I think
GeorgeZZzz said:
How is it going now? Have you successfully unlock B7
I want to unlock B20 and went through all the steps from this guide but no luck
But I did LOCKED B7 which si available originally on my Mi NOTE (dual-sim) to see if the value I set in to 6828 is working.
you can have a go to unlock B7 I think
Click to expand...
Click to collapse
i need more step by step info, with pictures if can, to show me how u did it please. thx in advance......
blackysan said:
i need more step by step info, with pictures if can, to show me how u did it please. thx in advance......
Click to expand...
Click to collapse
I posted a new thread here
Instruction DIAG mode for Redmi note 4g
4pda.ru/forum/index.php?showtopic=611491&st=4620
hi there i got mx4 pro exynos version .its got flyme 4.2.2.1 A
.working fine with 3 uk..4g 3g etc but its not getting 4g on EE.they using 1800mhz ir 2600Mhz fdd and meizu supports both of them .
tried to use B1 B3 and B7 But didnt worked .also when i tried to select EURO bands Or USA bands its says unsucessfull .
please Me to sort ouf this
thanks
silverbox750 said:
hi there i got mx4 pro exynos version .its got flyme 4.2.2.1 A
.working fine with 3 uk..4g 3g etc but its not getting 4g on EE.they using 1800mhz ir 2600Mhz fdd and meizu supports both of them .
tried to use B1 B3 and B7 But didnt worked .also when i tried to select EURO bands Or USA bands its says unsucessfull .
please Me to sort ouf this
thanks
Click to expand...
Click to collapse
And if you activate the roaming?
i guess you are having a chinese version of mx4 , if international version it will be default support for all .
if u figure out the way , please let me know . because same happen to me here .
reference: http://club.huawei.com/thread-5831618-1-1.html
What you need to know:
You need to be either on B133, or B3xx to upgrade. (xx means any number, like B312, B303......)
You need to have root/superuser removed to upgrade.
Upgrade might erase user data, to be safe backup first.
If you are not on the required versions, go to the download page, below the big blue "下载" button, there's a link:
版本: B133【EMUI3.0_Android4.4】...................
Click it to download and flash your B133
To download the upgrade ROM, click the big blue "下载" button.
download links:
MT7-TL00:
http://emui.huawei.com/cn/plugin.php?id=hwdownload&mod=detail&mid=96
MT7-TL10:
http://emui.huawei.com/cn/plugin.php?id=hwdownload&mod=detail&mid=97
MT7-UL00:
http://emui.huawei.com/cn/plugin.php?id=hwdownload&mod=detail&mid=98
MT7-CL00:
http://emui.huawei.com/cn/plugin.php?id=hwdownload&mod=detail&mid=95
Why not for L09 ?!?!?
XDADEVX said:
Why not for L09 ?!?!?
Click to expand...
Click to collapse
http://consumer.huawei.com/my/support/downloads/detail/index.htm?id=53957
Thank you alvinma! I've been waiting for this for a long time!
hi
can someone link me to the dload detailed explanation?
I downloaded the file, i created dload folder in the sd card, the updater couldnt notice it. nor when i placed it in the phone memory
MosheDrori said:
hi
can someone link me to the dload detailed explanation?
I downloaded the file, i created dload folder in the sd card, the updater couldnt notice it. nor when i placed it in the phone memory
Click to expand...
Click to collapse
you probably need to upzip to get the UPDATE.APP
Upxip? Means unzip?
And then to run an exe file? Did I understand you correctly?
I thought to locate the zip file in SD card\dload and to run the updater to local file.
MosheDrori said:
Upxip? Means unzip?
And then to run an exe file? Did I understand you correctly?
I thought to locate the zip file in SD card\dload and to run the updater to local file.
Click to expand...
Click to collapse
Make sure the UPDATE.APP is in the dload folder on the external sd card.
What I did was:
Power off my phone
Press and hold power, volume up, and volume down
Once the phone turns on, release power
Keep holding volume up and volume down until the firmware update starts automatically
Keep in mind that this will wipe all of your data, so you might want to backup.
Is this the final release or it's still on beta stage !?
Al-Mobarmge said:
Is this the final release or it's still on beta stage !?
Click to expand...
Click to collapse
Final
Send from Mate 7 using tapatalk
Managed to get lolli which is running smoothly, however I can not hide anymore the navigation bar...
Any solution?
Is there any way of using these Chinese versions in north america and have data speeds over 2G?
Thanks!
ecep said:
Managed to get lolli which is running smoothly, however I can not hide anymore the navigation bar...
Any solution?
Click to expand...
Click to collapse
If you followed the update guide found in the downloaded zip file and upgrade to lollipop from the recommended versions you should be fine.
chanthony said:
Is there any way of using these Chinese versions in north america and have data speeds over 2G?
Thanks!
Click to expand...
Click to collapse
These versions are for phones sold in main land Chinese only. Is your phone one of the four main land Chinese versions?(TL00, TL10, UL00, CL00)
Note: there's also a TL10 international version. If you have TL10 you probably have the international version.
alvinma said:
These versions are for phones sold in main land Chinese only. Is your phone one of the four main land Chinese versions?(TL00, TL10, UL00, CL00)
Note: there's also a TL10 international version. If you have TL10 you probably have the international version.
Click to expand...
Click to collapse
Unfortunately, I have the CL00 version. Would I be able to use the TL10 rom? Or flashing a portion of the rom?
I have TL10 from UAE region would I able to use chinese version on my phone ? I use malayiza version and some bugs happen to my phone also tell me how I remove this version
baso2000 said:
I have TL10 from UAE region would I able to use chinese version on my phone ? I use malayiza version and some bugs happen to my phone also tell me how I remove this version
Click to expand...
Click to collapse
you can't use the Chinese version
Sent from my HUAWEI MT7-L09 using Tapatalk
chanthony said:
Unfortunately, I have the CL00 version. Would I be able to use the TL10 rom? Or flashing a portion of the rom?
Click to expand...
Click to collapse
you should use the CL00 ROM then....
I will check for the 2G problem for you......What carrier are you on? which band is your carrier using for 3G and 4G?
Sent from my HUAWEI MT7-L09 using Tapatalk
alvinma said:
you should use the CL00 ROM then....
I will check for the 2G problem for you......What carrier are you on? which band is your carrier using for 3G and 4G?
Sent from my HUAWEI MT7-L09 using Tapatalk
Click to expand...
Click to collapse
Currently Telus in Canada, however I would be able/willing to switch to either Bell or Rogers. Below are the bands for the three different carriers I found on the internet.
Telus
2G
CDMA 850/1900
EVDO 850/1900
3G (and fake 4G)
HSDPA 850/1900
HSPA+ 850/1900
UMTS 850/1900
WCDMA 850/1900
1x EV-DO CDMA2000
4G (called 4G+)
LTE 1700/2100
Bell
2G
CDMA 850/1900
EVDO 850/1900
3G (and fake 4G)
HSDPA 850/1900
HSPA+ 850/1900
UMTS 850/1900
WCDMA 850/1900
1x EV-DO CDMA2000
4G
LTE 1700
Rogers
2G
GSM 850/1900
GPRS 850/1900
EDGE 850/1900
3G (and fake 4G)
HSDPA 850/1900
HSPA+ 850/1900
UMTS 850/1900
WCDMA 850/1900
4G
LTE 1700
chanthony said:
Is there any way of using these Chinese versions in north america and have data speeds over 2G?
Thanks!
Click to expand...
Click to collapse
For HUAWEI MT7-CL00 sold and intend to be used in china mainland only then please consider the following:
4G network standard Telecommunications 4G (TDD-LTE / FDD-LTE)
3G network Telecom 3G (CDMA2000) / WCDMA (international roaming)
2G network standard Telecom 2G (CDMA) / Mobile / Unicom 2G (GSM)
Network standard Main card: Support China Telecom 4G / 3G / 2G; Deputy Card: Mobile / Unicom 2G; upper and lower slot can be arbitrarily selected one of the main card set
Network frequency 4G: TDD-LTE: Band 41 (100MHz), FDD-LTE: Band1 / 3 (B1 is limited to international roaming use); 3G: CDMA 800MHz 1X & EVDO, WCDMA / HSPA + / DC-HSDPA: 850/900/1900 / 2100MHz ( international roaming), DC-HSPA + 42Mbps: Band1 (international roaming); 2G: GSM / GPRS / EDGE: SIM1: 850/900/1800 / 1900MHz (international roaming), SIM2: 900/1800 / 1900MHz
ecep said:
For HUAWEI MT7-CL00 sold and intend to be used in china mainland only then please consider the following:
4G network standard Telecommunications 4G (TDD-LTE / FDD-LTE)
3G network Telecom 3G (CDMA2000) / WCDMA (international roaming)
2G network standard Telecom 2G (CDMA) / Mobile / Unicom 2G (GSM)
Network standard Main card: Support China Telecom 4G / 3G / 2G; Deputy Card: Mobile / Unicom 2G; upper and lower slot can be arbitrarily selected one of the main card set
Network frequency 4G: TDD-LTE: Band 41 (100MHz), FDD-LTE: Band1 / 3 (B1 is limited to international roaming use); 3G: CDMA 800MHz 1X & EVDO, WCDMA / HSPA + / DC-HSDPA: 850/900/1900 / 2100MHz ( international roaming), DC-HSPA + 42Mbps: Band1 (international roaming); 2G: GSM / GPRS / EDGE: SIM1: 850/900/1800 / 1900MHz (international roaming), SIM2: 900/1800 / 1900MHz
Click to expand...
Click to collapse
Is there anyway of allowing a different provider's SIM to be the main card?
Is there anyway to unlock the SIM? or flash with a different/custom ROM?
Hey Guys, unfortunately
this is my first US phone i have bought, and guess what it is not compatible with my carrier LTE :/
so the people have managed to get support of the B3 & B20 bands in which the most used bands on the motot nexus 6 and lg nexcus 5....
i have tried & tried to reach out a way to connect to the QPST / QXDM
but i don't have the Diag driver or the engeneering driver
yet the radio firmware...
now since @papi92 have ben able to get band 12 and flash it to the nexus
he maybe able to help us/me with this issue!
Hi. I purchase a Blu VIVO 5R from amazon uk
The product description was that the phone sold by amazon have the following bands 4G LTE/FDD (2/4/7/12/17), 3G (850/1700/1900/2100)
But the one that it came have the following band 3G: (900/1900/2100) 4G FDD LTE: (1/3/7/20) TDD LTE: (38/38/40/41)
So im unable to receive 4G sinal (i need the FDD b4)
Is there any way to activate the band 4? maybe by installing another rom?
I checked on willmyphonework and its seems that there is only one version. That is why i think that maybe is possible to activate it..
Any help will be much apreciate.
Thanks for reading.
D33DL1T said:
Hi. I purchase a Blu VIVO 5R from amazon uk
The product description was that the phone sold by amazon have the following bands 4G LTE/FDD (2/4/7/12/17), 3G (850/1700/1900/2100)
But the one that it came have the following band 3G: (900/1900/2100) 4G FDD LTE: (1/3/7/20) TDD LTE: (38/38/40/41)
So im unable to receive 4G sinal (i need the FDD b4)
Is there any way to activate the band 4? maybe by installing another rom?
I checked on willmyphonework and its seems that there is only one version. That is why i think that maybe is possible to activate it..
Any help will be much apreciate.
Thanks for reading.
Click to expand...
Click to collapse
Hi,
If you want you can try to flash newer update V25. It's here https://forum.xda-developers.com/vivo-5r/how-to/blu-vivo-5r-stock-roms-bluv0090eev11-t3492756
Backup your important data. Use SP flash tool to flash the newer update. Let it ran through the setup, and then factory reset.
Please let us know if you managed to fix the problem. Thanks.
Hi. I have UK version BLU_V0090EE if I flash it with the USA versión Blu V0090UU would be able to use the lte bands from USA or would just brick the phone?
Sent from my ASUS_Z00TD using Tapatalk