Database Users

Newsmy Carpad NU3001 CM13 ROM

Hi,
So as many of you already knew - I'm working on porting CM13 onto my NU3001.
I has it on my desk table, so I could work on it during my days. (I have another NR3001 installed in my car)
I already made some work for our unit SW. This is quick screenshots. Sources based on xdAuto and CM13. This is a very BETA and many things not working for now.on.
Why? : When I realize than CyanogenMod 13 (6.0.1) works on my Motorola XT1080 better than stock - I start thinking of porting CM13 to our device. And when I have spare set - I start porting.
How? : I took easiest way - try to do not modify kernel a lot, instead adopt bionic and other libraries for out 3.0.36+ kernel.
Currently working staff (it is very beginning):
1. Recovery TWRP 3.0.2
2. CM13 (LineAge OS) booting.
3. Graphics working (there is some blinking present).
4. Wifi working
5. Android audio working
6. Bonovo Radio working
4. Most of the rest is on the way (GPS, BT, rest of Bonovo apps)
UPDATE_1:
I decide to do not stuck with CM 13 and switch to AOSP N release (7.0) (mostly because on my daily job - we also going to Android N, so it should be more familiar to me now)
Currently working staff:
1. Recovery TWRP 3.0.2
2. SELinux needs to be carefully ported (kernel part), cause starting from 7.0 is can not be disabled (as I did for CM13 to easy port)
During this port I will try to minimize inpact to AOSP release, so any future updates should be much more easier.
For you to understanding of amount of needed work - kernel already has 100+ patches on top of xdauto release. Approximate left about 250-300 patches to revise/port.
Android 7.0 port abandoned because of bigger and bigger amount of work need to be done to port SELinux on top of our outdated kernel.
UPDATE2:
I setup review build environment, so who want to look at NOT-FULLY-WORKING CM13 could download sources and binaries. I do not provide instructions how to flash it, because who wants to look and contribute already know hot to flash, and who doesn't probably don't really want this NOT-FULLY-WORKING CM13
UPDATE3:
So I finally managed to get functional networking. So now Wifi working, internet working, display working.
I starting to port all necessary items. No more 'hard' showstoppers so far.
New build (I believe it is build number 5) should be ready in an our on build server, so I could test it more fully.
UPDATE4:
Cause CyanogenMod is no more maintained - switched to it's successor Lineage OS 13.0, starting from build 8
UPDATE5:
Build number 15 has working audio + radio
UPDATE6:
Most of Bonovo changes ported, new build 20 ready.
This build contains zip file which should be flashable via twrp, but I not test it this way.
Issues remaining so far(most noticeable to me):
1. Display flickering (my suspect is to vsync/fence mechanism slightly changed in Android 6.0, need to investigate)
2. HW Volume buttons not working on device
3. No audio In
UPDATE 7:
Starting from build 23 following images available:
cm_rk3188-ota-XX.zip - update to use via TWRP
nu3001-la-cm13-XX-userdebug.tar.gz - build image for flash via command line rkflashtool under linux (full or partial flash)
rkflash_nu3001-la-cm13-XX-userdebug.zip - Full image to be flashed via PC GUI RK Batch Tool.
kernel_nu3001-la-cm13-XX-userdebug.tar.gz - just kernel with debug symbols for debugging purposes.
To just download sources:
repo init -u https://gerrit.nc.org.ua/manifest -b nu3001_cm13
If you plan to contribute - login to Gerrit with GMail, push your SSH public key, choose login name and then do:
repo init -u ssh://<user>@gerrit.nc.org.ua:29418/manifest -b nu3001_cm13
Builds will be available on Jenkins build server (login also via GMail, PM for access grant on current project stage):
https://jenkins.nc.org.ua/
1.5 GB folder on MEGA
4 files
mega.nz
Please do not spoof this thread with questions like "When?", I will try to post updates regularly in this message.
This thread created is mostly to exchange experience with this build once it is published (issues, TODOs, etc)

**Reserved **
First!

Second! Lol
I'm not a developer so unfortunately I can't contribute, but hopefully those who can will.
At the very least I can beta test when its a little more complete.

Android port system less complicated than the application Bonovo.app and MCU. Good luck and patience.

Black're a legend !!
Your project is great !!! see Android 6.0 on Carpad would be great.
Thanks for the great effort you make for all

Woooow great !!
Good luck

nice one, i hope a very important feature:
"that can be use apps, which require android +4.4.4, like lollipop"
I say that because android auto "stand alone" coming soon, so if will be possible install this app in the radio, we have android auto pure, ( not automate that is awesome but is not the same like original ), and maybe mp3 stuttering from usb can be solved in this rom.
keep up work!

Thanks for the sneak peak, looks promising. I'll gladly help sponsor a new device if you happen to brick yours. I love this headunit and how far the community has gotten in supporting it.

I want to buy NU3001 now, is there any way to get it?

vivacious said:
I want to buy NU3001 now, is there any way to get it?
Click to expand...
Click to collapse
NU3001 or ROM ? if you want NU3001 - you should go to aliexpress from wiki link. If ROM - it is not ready yet. I have half-working CM13.0 - no connectivity working (wifi, bt) so it is useless for now, and Android 7.0 porting in progress.

VBlack said:
NU3001 or ROM ? if you want NU3001 - you should go to aliexpress from wiki link. If ROM - it is not ready yet. I have half-working CM13.0 - no connectivity working (wifi, bt) so it is useless for now, and Android 7.0 porting in progress.
Click to expand...
Click to collapse
I want NU3001 because it has hdmi option. But check in aliexpress newsmy store said it is no production now. Is there someone have stock?
---------- Post added at 01:48 AM ---------- Previous post was at 01:43 AM ----------
VBlack said:
NU3001 or ROM ? if you want NU3001 - you should go to aliexpress from wiki link. If ROM - it is not ready yet. I have half-working CM13.0 - no connectivity working (wifi, bt) so it is useless for now, and Android 7.0 porting in progress.
Click to expand...
Click to collapse
I want NU3001 because it has hdmi option. But check in aliexpress newsmy store said it is no production now. Is there someone have stock?

vivacious said:
I want NU3001 because it has hdmi option. But check in aliexpress newsmy store said it is no production now. Is there someone have stock?
Click to expand...
Click to collapse
I just put NU3001 to aliexpress search bar and found a lot of propositions, I think there should be available one.

Hi VBlack,
it's nice to know you're making progress on the new ROM CM13. All are rooting for you !! Your work would be wonderful !!
I have only one question:
With the ROM of XDAuto I found an annoying problem that occurs when i turn off and then relight the Carpad.
When the power back very often the Carpad car remains with black screen until i touch it with my finger.
I think the problem is somehow related to the USB ports.
Even with your ROM does this happen ?? When you turn on the car, the Carpad remains ever with black screen ??
Thank you!!

VBlack said:
NU3001 or ROM ? if you want NU3001 - you should go to aliexpress from wiki link. If ROM - it is not ready yet. I have half-working CM13.0 - no connectivity working (wifi, bt) so it is useless for now, and Android 7.0 porting in progress.
Click to expand...
Click to collapse
Do you have your efforts posted on github anywhere? Would you mind doing so?
There is a chance I may be working on these devices again after all, and having a working CM provides a *LOT* of possibilities. Namely the Theme engine.
If you would be willing to post your work, I'm sure there are a handful of us who could help with the port.
Thanks,

Zaphod-Beeblebrox said:
Do you have your efforts posted on github anywhere? Would you mind doing so?
There is a chance I may be working on these devices again after all, and having a working CM provides a *LOT* of possibilities. Namely the Theme engine.
If you would be willing to post your work, I'm sure there are a handful of us who could help with the port.
Thanks,
Click to expand...
Click to collapse
Nice to hear from you. Sure I will share. Current situation is next:
CM13 - no wifi (looks like netfilter from userspace not match netfilter from our outdated kernel), no selinux (completely disabled), and increased system partition to be able to add opengapps, twrp - works.
AOSP 7 - it is strongly rely on selinux, so i could not just disable it, and now I'm trying to merge new selinux with our old kernel...
So, i will upload CM13 in current state, and continue on aosp 7, if i fail with aosp 7 i will back to cm13. This is current plan.
Sent from my DROID MAXX using Tapatalk

Zaphod-Beeblebrox said:
Do you have your efforts posted on github anywhere? Would you mind doing so?
There is a chance I may be working on these devices again after all, and having a working CM provides a *LOT* of possibilities. Namely the Theme engine.
If you would be willing to post your work, I'm sure there are a handful of us who could help with the port.
Thanks,
Click to expand...
Click to collapse
I update first post with sources and build information

@VBlack, you mention "our outdated kernel". Does this imply that the kernel sources aren't available? I am very interested in this project because I am looking for a head unit with fully update firmware that can be kept up to date with security patches, and some of the Android security patches include the kernel (e.g. the recent "dirty cow" vulnerability).

shatteredsilicon said:
@VBlack, you mention "our outdated kernel". Does this imply that the kernel sources aren't available? I am very interested in this project because I am looking for a head unit with fully update firmware that can be kept up to date with security patches, and some of the Android security patches include the kernel (e.g. the recent "dirty cow" vulnerability).
Click to expand...
Click to collapse
No, we have kernel sources, but our kernel version 3.0.36 and looks like nobody release Android kernel 3.14 or 3.18 for rk3188. 3.14 and 3.18 mostly used in Android M and N. So combining Android M or N with such outdated kernel is not a trivial task. Because of this incompatibility we currently have all networks issue on this CM13 project.

Kernel 3.0.36 is 4.5 years old. The 3.0 branch is no longer maintained with security patches, and hasn't been maintained in over 3 years. There have been numerous security exploits in the Linux kernel since then, many of which are applicable to Android. Is it worth even persevering with this under such an extreme kernel constraint?

shatteredsilicon said:
Kernel 3.0.36 is 4.5 years old. The 3.0 branch is no longer maintained with security patches, and hasn't been maintained in over 3 years. There have been numerous security exploits in the Linux kernel since then, many of which are applicable to Android. Is it worth even persevering with this under such an extreme kernel constraint?
Click to expand...
Click to collapse
You'd be surprised how many phones in the market use old kernels (3.0 is not too old for Android - it is about 2-3years off from active development).. But true is that Android kernel despite it's version less vulnerable than Desktop one, and has many fixes included (it is does not increase kernel version, like mainline kernel). Because of this it is generally hard to say which security issue will be there for sure. But on the other hand Android N and Android M has SELinux enabled, and Android N could not have it disabled. It is dramatically increase overall security of the system. But for the most of traditional Android user kernel exploits does not produce many harm - it is not a corporate server with sensitive information. And many of them used to obtain root on bootloader locked systems.
So generally for what I have in mind:
1. If succeeded just with CM13 - I have disable SELinux there - it is will be not less secure than original 4.x release - just system/google components will be upgraded, which allow us use modern UI features from Android M, and also adds more compatibility with new applications revisions.
2. If succeeded with AOSP 7.0 - SELinux will be enabled there, so we will have security addition on top of old kernel, which actually will increase security alongside allowing UI features from Android N.
So in any case it is very nice to have.

Kali nethunter for yu yunique/plus

Kali nethunter is a penetration testing android mod, that installs a linux (kali) chroot at the data partition of the device. Although the same can be achieved by using simple apps like Linux Deploy, but Nethunter provide you with a UI by using the nethunter app and unified android and linux terminal.NetHunter supports Wireless 802.11 frame injection, one-click MANA Evil Access Point setups, HID keyboard (Teensy like attacks), as well as BadUSB MITM attacks – and is built upon the sturdy shoulders of the Kali Linux distribution and toolsets
For more info :-
https://www.kali.org/kali-linux-nethunter/
STEPS:-
1)Download the files from below
2)Flash Zip1 & Zip2
3)Reboot phone
4)That's it . You are good to go now
NOTE:-
1)You can flash Caesium Kernel if you want full kali nethunter support
2)I have not tested it in miui but it should work
3)You have to flash both zips
4)You will need a compatible WiFi adapter for hid and other type of attacks .
Links :-
nethunter-arm.zip
update-nethunter-arm.zip
Caesium Kernel
Source Code: https://build.nethunter.com
Version Information
Status: Stable

Do I need to do a clean flash or dirty flash it over my current rom?

Andy2290 said:
Do I need to do a clean flash or dirty flash it over my current rom?
Click to expand...
Click to collapse
Just flash it over your rom
Sent from my Redmi 3S using Tapatalk

Sir, I would like to ask your permission to share your amazing work on YU forums where more number of Yunique users will be able to find it. All the credit will be given to you and I will provide a link to this XDA thread. I hope you allow me and give me permission to do so.
If you feel I might be in the wrong here then I would request you to post this project of your by yourself on the YU forums. It will be much appreciated there.

Removing?
I have installed it for testing, Now I want to remove it. is there a way to uninstall it?
I'm having lollipop stock ROM. Shall I install Ceasium Kernal?

blacm said:
I have installed it for testing, Now I want to remove it. is there a way to uninstall it?
I'm having lollipop stock ROM. Shall I install Ceasium Kernal?
Click to expand...
Click to collapse
I don't support lollipop, so no bug reports for Caesium please

reserved

I have yu yuphoria 5010a . Installed twrp and custom rom of android pie . will this penetrating software work on my device?

[KERNEL] Coconut-Kernel (OOS-Oreo(5.x.x) (Pie test Kernel 9.0.3)

Coconut Kernel
Just a fancy name. Don't bother...
Please read the last post for pie kernel update.
Code:
***I'm not responsible for any problems that might occur flashing this kernel or what you do with the kernel support***
This kernel is only for stock Oxygen OS Oreo 5.x.x or any rom that supports stock kernel
This kernel was made for my own use as i could not find any working kernel with USB Wifi Adapter drivers supporting packet injection and monitor mode or simply Nethunter support.
I've been using ZaneZam's kernel for my nougat OOS. Since the Oreo version wasn't working for whatever reason, i tried to compile one my own.
My sole intention was to create a kernel with USB Wifi drivers and monitor mode/packet injection working. So this kernel doesn't have all those tweaks/options like other great kernels.
People who want upstreamed kernel with nethunter, drivedroid, android auto and stock features working can use this kernel on OOS Oreo.
Kernel has been upstreamed to 3.18.134(current)
Whats working?
- Stock features
- DriveDroid(CDROM Patch)
- USB Wifi adapters with monitor mode/packet injection
- AndroidAuto
Tested Working Wifi Adapters
1. TP Link WN-722N v1 (ath9271 chipset) - all ath9271 chipset should work
2. Alfa card AWUS036NHA (Atheros ath9271 Chipset)
3. Alfa card AWUS036NH (Ralink RT3070 Chipset)
Untested adapters
All adapters on nethunter support page have been added but not tested.
Installation
Download from attachment and flash the kernel zip file from recovery.
It is recommended to flash stock boot.img before flashing the zip.
Using USB Wifi Adapters
1. Reboot the device after flashing the zip
2. Goto Settings-->Advanced and turn on OTG Storage
3. Plugin your USB Wifi card and type ifconfig wlan1 up to test.
Keep in mind that OTG Storage turns off automatically after 10 mins on idle.
You don't need to insmod any modules as all drivers are built inline with the kernel.
Credits
Google
@ZaneZam for his support
Anykernel author
My friend @OscarAkaElvis (author of the great airgeddon tool to audit wireless networks), who tested the beta versions for me.
@nathanchance for his kernel compile and upstream guide
@flar2 for his source that i used to learn compiling at first
All others whose commits i've used
Source
https://github.com/OnePlusOSS/android_kernel_oneplus_msm8996
https://github.com/android-linux-stable/op3
Additional Note - I would like to mention that you can use tools like LinuxDeploy or other chroot supporting apps and the wifi adapters will work fine just like nethunter.
If you guys prefer ZaneZam's version, you can flash my kernel and then flash his kernel for oreo. Then everything will work on his kernel too. There is a small fix needed which will be applied on flashing my kernel.

Hi, I worked as beta tester for this kernel compilation and I must say is the best kernel ever for Oneplus3 I tried (in my opinion). All the standard functions are working flawlessly (wifi, camera, flashlight, etc...). No errors, no glitches. Gestures are working in order to enable camera or flashlight.
I tested the kernel also using Kali Nethunter, it works like a charm. I also installed a Linux using Linux Deploy app on which everything also was working fine.
Android Auto is fully working. Tested plugging it into real car (not emulators). Drive Droid is also working allowing to mount the drives without any problem. This is a feature that many custom kernels are not bearing in mind but for some people is an important stuff to be working. I use it every day.
And regarding the external usb cards. Yes, I tested it using a OTG (On-The-Go) cable. I can confirm that these two chipsets are working. In my case it was not a TP-Link card for Atheros chipset. I tested it using AWUS036NHA (Atheros ath9271 Chipset) Alfa wireless card and it worked very well supporting monitor mode, etc. I also tested it with another Alfa card AWUS036NH (Ralink RT3070 Chipset) and it worked fine too.
So congratz to de creator. This last month was a hard work. Good job. All the Oneplus3 users (like me) will be very grateful to you because of this.

Bro can you compile kernel for los based custom roms pie and oreo plz with nethunter support?,

ayanroy said:
Bro can you compile kernel for los based custom roms pie and oreo plz with nethunter support?,
Click to expand...
Click to collapse
I think ZaneZam has already done that. He builds for stock and lineage os. Did you check?

ayanroy said:
Bro can you compile kernel for los based custom roms pie and oreo plz with nethunter support?,
Click to expand...
Click to collapse
I thought there was a version already available for LOS oreo.
Since i was wrong, i compiled one. You can find it in the following thread.
https://forum.xda-developers.com/on...nel-coconut-kernel-lineage-15-1-oreo-t3902479
Pie version - maybe later

fredrickz said:
I thought there was a version already available for LOS oreo.
Since i was wrong, i compiled one. You can find it in the following thread.
https://forum.xda-developers.com/on...nel-coconut-kernel-lineage-15-1-oreo-t3902479
Pie version - maybe later
Click to expand...
Click to collapse
Thanks alot bro, will be waiting for your pie version

ayanroy said:
Thanks alot bro, will be waiting for your pie version
Click to expand...
Click to collapse
Did you check the oreo version? Or are you just waiting for the pie release?
For those who had this working can post here as a feedback.

very nice job! My TP-LINK WN722N is working just fine with nethunter!
Do you think it would be possible to add HID support to this kernel? To be able to execute HID/Bad USB attacks, that would be super cool!

hokyjack said:
very nice job! My TP-LINK WN722N is working just fine with nethunter!
Do you think it would be possible to add HID support to this kernel? To be able to execute HID/Bad USB attacks, that would be super cool!
Click to expand...
Click to collapse
I'll add that in the next version

I can confirm working monitor mode & injection on my Oneplus3 OOS Oreo with TP Link WN-722N v1 (ath9271 chipset). Nice work @fredrickz !

Limitscrw said:
I can confirm working monitor mode & injection on my Oneplus3 OOS Oreo with TP Link WN-722N v1 (ath9271 chipset). Nice work @fredrickz !
Click to expand...
Click to collapse
Can you suggest me a guide to install kalinethunter? i'm using magisk as root thx

scorpion90 said:
Can you suggest me a guide to install kalinethunter? i'm using magisk as root thx
Click to expand...
Click to collapse
u maybe can try to use one of my provided nethunter packs from here: https://www.androidfilehost.com/?w=files&flid=151160
which where done with this: https://github.com/zanezam/kali-nethunter and which has a little troubleshoot section in Readme at the end
for starting

Excellent kernel. Super performance and good battery life. I hope you make one for oxygen OS stock pie when it releases.

Didn't have one problem, aside from the horrendous Mtp-procedure install on this device(just got a Op3 recently).
Runs smooth, don't drain the battery like many Nethunter kernel from official side.
I hope this will expand in more then just a one-days development, because we need more of user who are beginning to programm etc.
I appreciate your effort and wanted to state that this kernel works without one single flaw whatsoever.. :silly:

UsPdSr said:
Didn't have one problem, aside from the horrendous Mtp-procedure install on this device(just got a Op3 recently).
Runs smooth, don't drain the battery like many Nethunter kernel from official side.
I hope this will expand in more then just a one-days development, because we need more of user wgo are beginning to programm etc.
I appreciate your effort and wanted to state that this kernel works without 1 flaw whatsoever.. :silly:
Click to expand...
Click to collapse
Thanks for the appreciation. Btw, I've already posted a pie version of the kernel with nethunter support built from holydragon sources. But it's not for OOS. It's for AOSP based roms. I'll try to compile a pie version when the official OOS sources are available.

Got my hands on an Alfa AWUS 036 NEH last week, and I am happy to report that monitor and injection are working just fine.

@fredrickz
Will u release one for pie?

metaspook said:
@fredrickz
Will u release one for pie?
Click to expand...
Click to collapse
I can compile from holydragon pie source.

fredrickz said:
I can compile from holydragon pie source.
Click to expand...
Click to collapse
Bro check your inbox...

metaspook said:
Bro check your inbox...
Click to expand...
Click to collapse
Hey i saw the message. But now I'm out of town. I'll message you when i return@metaspook

kali nethunter and andrax kernel for redmi note 4 (mido) SD

hai friends
i compile android kernel for enable monitor mode myself and successfuly flash in redmi note 4 (mido) SD
it's working fine i tested my self
working on both kali nethunter and andrax
see screenshot here - https://drive.google.com/open?id=1ft0CVOIBHAF42Q9npoAgegjJ9nAy4Dnv
i worked hard to make this kernel support me
if you like my work donate me - https://paypal.me/kesava416 :angel:
requriments:
1.unlock bootloader - https://youtu.be/4EZEC67pOGk
2.custom rom oero (AospExtended) - https://downloads.aospextended.com/mido/ download oero rom
3.recovery (orange fox recovery) - https://youtu.be/EAkVl-gpNGU or https://youtu.be/WFU-44qRXes
4.install magsik manager - https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
5.any external wifi adapter with support monitor mode (alfa,panda) i am using panda (PAU06)
features:
support external wifi card support
supported chipset - atheros and ralink
installation:
before doing this process must take backup if anything worng means
to avoid bootloop
1.copy kernel into internal storage
2.then flash kernel by orange recovery
3.wipe && cache
4.reboot
5.now open magsik manager apk -
6.go to downloads find wireless Firmware for nethunter
7.install zip file and reboot
8.now connect wifi adapter to your phone (panda wireless PAU06) working for me
9.now give command airmon-ng on andrax or kali nethunter
you got wlan1
see screenshot here - https://drive.google.com/open?id=1CHlZ5Pay5XwvM2a6wqg6PaVrvoleNM3m
dragonfist kernel for oreo only - https://drive.google.com/open?id=18GzflxQhVNtxcgkloAY36sialJjH1pIt
if you like my work donate me - https://paypal.me/kesava416 :angel:
support me i make kernel for pie rom also thanks for watch this post
support my channel i will make video how to compile android kernel

Not working
This is not working in my redmi note 4..

azazarfin03 said:
This is not working in my redmi note 4..
Click to expand...
Click to collapse
Which rom are you using bro.....? your drivers not dectected or you got boot loop tell me i need to fix pblms reply me bro

Please help me, this kernel not work on my phone, specification my phone
Xiaomi redmi note 4 (mido)
LineageOS 15.1
Kernel linux 3.18.71
Please help me master:crying:

mr.mats said:
Please help me, this kernel not work on my phone, specification my phone
Xiaomi redmi note 4 (mido)
LineageOS 15.1
Kernel linux 3.18.71
Please help me master:crying:
Click to expand...
Click to collapse
Bro i told you use AOSP extented Oreo Rom bro

dragonfist69 said:
Bro i told you use AOSP extented Oreo Rom bro
Click to expand...
Click to collapse
Okay bro i can try this
Thanks for you help
---------- Post added at 03:05 PM ---------- Previous post was at 02:57 PM ----------
I can download rom aosp extended oreo or pie?

dragonfist69 said:
Bro i told you use AOSP extented Oreo Rom bro
Click to expand...
Click to collapse
I was use aosp extended still not work
i use tplink tl wn722n

mr.mats said:
I was use aosp extended still not work
i use tplink tl wn722n
Click to expand...
Click to collapse
tplink v2 cannot support bro.....

mr.mats said:
I was use aosp extended still not work
i use tplink tl wn722n
Click to expand...
Click to collapse
Try another wiifi adapter with monitor mode support

dragonfist69 said:
Try another wiifi adapter with monitor mode support
Click to expand...
Click to collapse
Ohh no i was buy tplink tl wn722n v2 ):
---------- Post added at 08:42 PM ---------- Previous post was at 08:41 PM ----------
Whats you wifi adapter?

mr.mats said:
Ohh no i was buy tplink tl wn722n v2 ):
---------- Post added at 08:42 PM ---------- Previous post was at 08:41 PM ----------
Whats you wifi adapter?
Click to expand...
Click to collapse
Panda wifi adapter but not working properly u buy some alfha wifi adapter

Can you please specify which chipsets of wifi adapters are supported by the kernel so that we can shortlist the best adapters among them. like rt5372 from ralink is supported. any onther chipset?

Amazing~
I saw your video on youtube and you did a great job
I was trying to build myself, especially for PIE,
But I never succeed.
Now I will watch your video and I will trying to compile for PIE
And sir, please make a tutorial
Thanks

v1da said:
Amazing~
I saw your video on youtube and you did a great job
I was trying to build myself, especially for PIE,
But I never succeed.
Now I will watch your video and I will trying to compile for PIE
And sir, please make a tutorial
Thanks
Click to expand...
Click to collapse
Wait for it i will make it bro

thank you
Hi I tried this kernel in miui caustom rom global and successfully unlocked monitormode
call me
[email protected]
---------- Post added at 11:40 AM ---------- Previous post was at 11:37 AM ----------
dragonfist69 said:
Panda wifi adapter but not working properly u buy some alfha wifi adapter
Click to expand...
Click to collapse
Hi I tried this kernel in custom miui rom android pie and successfully unlocked monitormode
but only alfa adaptor . i tried tplink 722 not workink

video
v1da said:
Amazing~
I saw your video on youtube and you did a great job
I was trying to build myself, especially for PIE,
But I never succeed.
Now I will watch your video and I will trying to compile for PIE
And sir, please make a tutorial
Thanks
Click to expand...
Click to collapse
where is video bro?

thanks
thank you brother . orginal post . please realse supprt tplink wifi card . :good::fingers-crossed:

anyone hava andrax apk + corp ? can u put a link to it ? plz

mhd 12 said:
anyone hava andrax apk + corp ? can u put a link to it ? plz
Click to expand...
Click to collapse
Andrax was closed right now andrax restart agian in may 2021

Hey, great work - will this also work on Redmi Note 8 also?

[KERNEL] Neon Kernel [4.14.195] [Nethunter] [MIUI 12/STOCK]

NEON KERNEL
Disclaimer:
Use this kernel at your own risk. Flashing it may brick your device. I'm not responsible for any software/hardware and any kind of damages/losses.​
Changelog v1.01
Upstreamed To Latest CAF With Linux Stable Merged.
Full Nethunter Support.
Supports Internal Monitor Mode.
Lots Of Under The Hood Bug Fixes.
Download
Click Me
How to flash:
- reboot into recovery
- make a backup of your original boot.img
- flash zip
- flash magisk if needed
- wipe dalvik (mandatory!)
XDA:DevDB Information
Neon Kernel, Kernel for the Xiaomi Mi A3
Contributors
arunbiju969, paul89rulez
Source Code: [url]https://github.com/ArunBiju/Neon-Kernel[/url]
Version Information
Status: Stable
Current Stable Version: v1.01
Stable Release Date: 2020-09-01
Created 2020-08-31
Last Updated 2020-08-31

Reserved1

Reserved2

Hi,
1- Can you add patching kernel so flashing magisk is not necessary.
2- Can this kernel be used in Custom Roms?
3- Whats the point of this kernel battery,performance,balanced or only for Nethunter?

sasukeob said:
Hi,
1- Can you add patching kernel so flashing magisk is not necessary.
2- Can this kernel be used in Custom Roms?
3- Whats the point of this kernel battery,performance,balanced or only for Nethunter?
Click to expand...
Click to collapse
Patching is already present, this kernel was also tested on crDroid basically any rom with stock vendor and MIUI, Finally this kernel is made for balanced use with Good performance and Battery with the latest bug fixes from ALS and nethunter is bonus.

bad news for me. Because i have OSS vendor and Pixel Experience Rom. so i cant flash it.. Sad..

sasukeob said:
bad news for me. Because i have OSS vendor and Pixel Experience Rom. so i cant flash it.. Sad..
Click to expand...
Click to collapse
I am planning an OSS release.

if it has flashing kernel and magisk flashing not necessary again, and if it has for OSS vendor, i will definetly try this kernel

Does packet injection work to do Deauth attacks, I would like to do deauth attacks without the need for a wifi adapter, by the way does it support all kinds of wifi adapters?

Charly737 said:
Does packet injection work to do Deauth attacks, I would like to do deauth attacks without the need for a wifi adapter, by the way does it support all kinds of wifi adapters?
Click to expand...
Click to collapse
Internal packet injection is not present as of now and yes it supports all the adapter supported by Kali Nethunter.

Friend since I installed this kernel I cannot use my phone as a universal remote control every time I try it restarts my phone I checked it and it is the friend kernel.

Also quick bug report
Face unlock doesn't work with this kernel.
Don't use it that much so it's not a big deal for me but have since switched to a different oss ROM and never got a log of the issue, my apologies

arunbiju969 said:
Patching is already present, this kernel was also tested on crDroid basically any rom with stock vendor and MIUI, Finally this kernel is made for balanced use with Good performance and Battery with the latest bug fixes from ALS and nethunter is bonus.
Click to expand...
Click to collapse
Well this may sound stupid or dumb but i had to, so how was the battery backup on crDroid? because i am trying find a perfect kernel to get the best battery backup i could from a 4000 mah and i have the CrDroid.
thanks for making this ( THANKED )
Regards.

Are you guys using Kali Nethunter or X-Tools via Termux?

nice effort,
is it better than perf+?

Hello. I cannot start a covert attack with your kernel, that is, I connect the phone to the computer, click on Execute attack, for 1 second the inscription: attack launched appears, and then the inscription: attack execution appears
ended. Tested on Windows 10. Internal monitor mode works and duckHunter Hid works too. Firmware: android 10 stock

Hey, airmon-ng working??? I need this kernel to get wifi handshakes using built-in wifi, if its already working please let me know.

Charly737 said:
Friend since I installed this kernel I cannot use my phone as a universal remote control every time I try it restarts my phone I checked it and it is the friend kernel.
Click to expand...
Click to collapse
Which phone you have

Is for Stock a10 or A11?

Gauravnoob said:
Which phone you have
Click to expand...
Click to collapse

Mia A3 Android 11