Related
Quick question; I'm on the T-Mobile OP6t. I'm running the stock rom but I'm rooted. If I wanted to update, how would I go about it? Would I just install the update and presumably lose root? So I'd have to flash magisk and re-root again after updating right?
Thanks in advance!
H3adru5H said:
Quick question; I'm on the T-Mobile OP6t. I'm running the stock rom but I'm rooted. If I wanted to update, how would I go about it? Would I just install the update and presumably lose root? So I'd have to flash magisk and re-root again after updating right?
Thanks in advance!
Click to expand...
Click to collapse
Download the full zip update file
Reboot into TWRP
Make Backup (recommended)
Install update
Immediately install TWRP
Reboot into TWRP
Install Magisk
Caltinpla said:
Download the full zip update file
Reboot into TWRP
Make Backup (recommended)
Install update
Immediately install TWRP
Reboot into TWRP
Install Magisk
Click to expand...
Click to collapse
Egh that sounds horrible lol. Any good OxygenOS room recommendations that keep wifi calling?
H3adru5H said:
Egh that sounds horrible lol. Any good OxygenOS room recommendations that keep wifi calling?
Click to expand...
Click to collapse
Its not that bad, actually. Takes like 5 minutes, tops.
Bildo41383 said:
Its not that bad, actually. Takes like 5 minutes, tops.
Click to expand...
Click to collapse
Tried googling around. Where would I pull the official update zips?
H3adru5H said:
Tried googling around. Where would I pull the official update zips?
Click to expand...
Click to collapse
in the root of your memory, along with the TWRP intaller and Magisk installer files as well.
Updating on these phones is super simple thanks to the A/B partition.
Install update as normal but DO NOT restart immediately.
Before restarting, open Magisk manager and press "install magisk" and install to inactive slot.
Restart, done.
stevob21 said:
Updating on these phones is super simple thanks to the A/B partition.
Install update as normal but DO NOT restart immediately.
Before restarting, open Magisk manager and press "install magisk" and install to inactive slot.
Restart, done.
Click to expand...
Click to collapse
That's what I thought. Could have sworn it was very simple to do so. Just update and re-root.
stevob21 said:
Updating on these phones is super simple thanks to the A/B partition.
Install update as normal but DO NOT restart immediately.
Before restarting, open Magisk manager and press "install magisk" and install to inactive slot.
Restart, done.
Click to expand...
Click to collapse
Would you do a local upgrade and select the full image? How do you install magisk to the inactive slot?
Pretty sure both the magisk installer and the twrp install script will automatically install to both slots
Masamune3210 said:
Pretty sure both the magisk installer and the twrp install script will automatically install to both slots
Click to expand...
Click to collapse
Nope.
The best thing to do is to take the standard upgrade or do local install twice to make sure both slots are at the same OS level.
When you boot TWRP then run the zip, it will install in both slots.
Magisk does not install to both slots. It only installs to the active slot.
You need to install, switch slots, reboot to TWRP again and install in that now active slots.
I make both slot_a and slot_b the same.
tech_head said:
Nope.
The best thing to do is to take the standard upgrade or do local install twice to make sure both slots are at the same OS level.
When you boot TWRP then run the zip, it will install in both slots.
Magisk does not install to both slots. It only installs to the active slot.
You need to install, switch slots, reboot to TWRP again and install in that now active slots.
I make both slot_a and slot_b the same.
Click to expand...
Click to collapse
My mistake, just got the phone a couple days ago
If you're rooted it's going to download the whole rom anyways. If yu didn't install TWRP let it download and install and when it tells you to reboot, don't do it. Go to magisk and select uninstall, then restore from the next menu. Go to recents and close everything. Go back to magisk and select install, then install to inactive partition after OTA from the next menu. Magisk will reboot the phone when it's done installing itself to the inactive partition (where your new update is already installed) and the phone will boot to that when reboots. You've just completed a dirty flash and retained root.
This is how you update when rooted.. simple and easy
Screenshot attached and follow this link for complete guide :good: https://forum.xda-developers.com/oneplus-6t/how-to/official-oxygenos-beta-1-oneplus-6t-t3881099
Dears, what is the correct procedure to install OTA updates if you are rooted? I mean without losing MAGISK & TWRP.
nithinte said:
Dears, what is the correct procedure to install OTA updates if you are rooted? I mean without losing MAGISK & TWRP.
Click to expand...
Click to collapse
Search my thread in Guide and News section
FunkWizard has a good Guide (link), use the TWRP instructions. It's in the same thread you can download the OTA zips from.
nithinte said:
Dears, what is the correct procedure to install OTA updates if you are rooted? I mean without losing MAGISK & TWRP.
Click to expand...
Click to collapse
Run update - dont reboot , launch magisk and add twrp.zip as a module - dont reboot , in magisk home "window" press install (on top) then press install to second slot (OTA) - reboot
Now that 11.0.2.2 is available OTA, can anybody give me a quick guide on how to upgrade from my existing 11.0.1.1 without losing root?
Hi. you have to download the full rom package. disable all modules in magisk. update in local update system. especially do not restart. and in magisk manager click on install and install on inactive slot after OTA update. magisk will recreate a boot image on the inactive slot. which will become active on restart. once the restart is complete the root is kept. all that remains is to reactivate the magisk modules.
Envoyé de mon IN2023 en utilisant Tapatalk
Merci beaucoup - cela a parfaitement fonctionné!
Philip said:
Merci beaucoup - cela a parfaitement fonctionné!
Click to expand...
Click to collapse
I have a guide in the guides section for this very reason with img's
Hello.... Normally you have to install the twrp a/b script after install the local update and then the magisk in inactive slot.....
That was ok in a lot of older updates and works.
This time if can't install the twrp a/b script. Everytime I get a fault message that twrp is not present....?!
Very strange.....
jensemann1974 said:
Hello.... Normally you have to install the twrp a/b script after install the local update and then the magisk in inactive slot.....
That was ok in a lot of older updates and works.
This time if can't install the twrp a/b script. Everytime I get a fault message that twrp is not present....?!
Very strange.....
Click to expand...
Click to collapse
That script is for older devices that has recovery inside boot.
OnePlus devices launches with Android 10 has a separate recovery slot. This means in order to install TWRP again your need to flash it with fastboot again.
Twrp not working on Oos11
Envoyé de mon IN2023 en utilisant Tapatalk
So it isn't necessary to install, only magisk in inactive slot....?!
Have said this before, shouldn't be any confusion, like I said I have a guide for it.
Extract from the guide for retaining root.
Update from 11 stable to 11+ stable whilst retaining root
For these guides the version used, was canary, simply change the channel to canary then select install / update:
Magisk Manager - Magisk (Canary) version: 1469b82a (21101)
Magisk - Magisk (Canary) version: 1469b82a (21101)
1. Download the relevant firmware for your device via oxygen updater
2. Open Magisk and remove all the modules you have installed, then reboot
**NOTE- At this point I copied out the whole firmware to my computer and extracted payload then extracted the contents of payload using payload dumper, the full firmware for 11.0.1.1 EU IN2023BA ,the boot img and patched boot img are at the foot of this guide.
3. Open up settings / system / system updates, click the cog and select "Local Upgrade" the file should be listed on screen, if not then move the file to the root of your phones storage /sdcard
4. Click install and allow it to go through the process
**NOTE- DO NOT REBOOT AT THIS POINT YOU WILL LOSE THE ABILITY TO PATCH ON THE FLY, SIMPLY BACK OUT OF THE SCREEN WHICH SAYS INSTALLATION COMPLETED. RESTART TO EXPERIENCE NEW FEATURES
5. Open up magisk and click install (you may see two install buttons, top one is magisk and the bottom is magisk manager, we need the top one)
6. You'll be faced with a screen that has several options, you want to select Install to Inactive slot (After OTA) then select "LET'S GO" once complete click reboot
7. Once your phones booted up your system / files should all remain as they were and you should have root access.
Thread:. https://forum.xda-developers.com/oneplus-8-pro/how-to/root-uk-eu-patched-magisk-boot-img-t4175033
You have an easier method if the OTA update is there in the system. Follow below guide. Specifically, step 2,3 and 5. That's all you need. You don't need the whole update. Tested this twice. 11 to 11.0.1.1 and so on.
https://www.the***********.com/install-ota-update-rooted-android-device-guide/
dladz said:
Have said this before, shouldn't be any confusion, like I said I have a guide for it.
**NOTE- DO NOT REBOOT AT THIS POINT YOU WILL LOSE THE ABILITY TO PATCH ON THE FLY, SIMPLY BACK OUT OF THE SCREEN WHICH SAYS INSTALLATION COMPLETED. RESTART TO EXPERIENCE NEW FEATURES
5. Open up magisk and click install (you may see two install buttons, top one is magisk and the bottom is magisk manager, we need the top one)
6. You'll be faced with a screen that has several options, you want to select Install to Inactive slot (After OTA) then select "LET'S GO" once complete click reboot
7. Once your phones booted up your system / files should all remain as they were and you should have root access.
Thread:. https://forum.xda-developers.com/oneplus-8-pro/how-to/root-uk-eu-patched-magisk-boot-img-t4175033
Click to expand...
Click to collapse
Steps 5 and 6 did not preserve root comping from OOS10. Magisk Manager is still there though. Looks like I'll be looking for a way to apply root again.
Edit: used the boot image from this link to get root back. I wasn't able to patch the file myself using Magisk Manager and fastboot boot it and have root enabled. https://forum.xda-developers.com/showpost.php?p=83775505&postcount=471
I was able to use the oneplus-8-pro_15.O.30_boot_patched IMG from the link to adb boot oneplus-8-pro_15.O.30_boot_patched.img from fastboot screen and then direct install Magisk from the manager. I retained root after a reboot.
ProfEngr said:
Steps 5 and 6 did not preserve root comping from OOS10. Magisk Manager is still there though. Looks like I'll be looking for a way to apply root again.
Edit: used the boot image from this link to get root back. I wasn't able to patch the file myself using Magisk Manager and fastboot boot it and have root enabled. https://forum.xda-developers.com/showpost.php?p=83775505&postcount=471
I was able to use the oneplus-8-pro_15.O.30_boot_patched IMG from the link to adb boot oneplus-8-pro_15.O.30_boot_patched.img from fastboot screen and then direct install Magisk from the manager. I retained root after a reboot.
Click to expand...
Click to collapse
That must be you're magisk manager and or you left magisk modules enabled..
Otherwise your phone wouldn't be booted at all..
To confirm, the steps have been used 100's of times without problems, the few that have issues have specific problems, namely what I mentioned above but more often than not they have an issue they aren't aware of and don't declare to be so I can't help them.
I would hazard a guess that that is the problem
dladz said:
That must be you're magisk manager and or you left magisk modules enabled..
I would hazard a guess that that is the problem
Click to expand...
Click to collapse
It was a couple of modules I forgot about. Got it sorted now. Thanks.
Not sure if the question was answered really. I have the ota update alert but can't install the ota without flashing the original boot.img (not a problem just have to get in front of a computer)..I tried this method but the full image on oxygen updater and OnePlus support site is 11.0.1.1 and not the new 11.0.2.2.
What's the easiest way of doing an ota without having to flash back stock boot.img, taking the ota, and reinstalling magisk/patching image if there's one?
Wait for the 11.0.2.2 Full update to keep root; that's what a few of us are waiting on as well
galaxys said:
Wait for the 11.0.2.2 Full update to keep root; that's what a few of us are waiting on as well
Click to expand...
Click to collapse
Thanks. Anybody had problems flashing back stock boot partition and taking the ota/rooting again manually via patched magisk image?
I've read some threads about problems and success's. I would check them out if your interested. I just take the ota, have magisk install to the inactive slot, and then reboot.
galaxys said:
I've read some threads about problems and success's. I would check them out if your interested. I just take the ota, have magisk install to the inactive slot, and then reboot.
Click to expand...
Click to collapse
You were able to take the ota without reflashing stock boot.img? It's currently failing for me and I'm fairly sure it's because I have a patched boot partition (this happened already when I upgraded via ota from oxygen 10 that's why I'm fairly sure). Let me know.
Sounds like because of your patched boot.
No, I have not seen the full ota 11.0.2.2 to download, I was giving an example....
Hi, simple question: will I lose root if I update to the latest oos? If so, will I have to re-root and reinstall every single module?
Simple answer to that exact question: yes.
Simple solution: after the update finished installing, DO NOT RESTART. Go to Magisk, then click install and select install to inactive slot. To the question, just accept, wait for it to finish, then hit restart. Enjoy your rooted 11.0.10.10.
Note: It's recommended to disable (no need to remove) all modules before starting the version update, then enabling them again, once the update has finished and you have already done the Magisk install.
I only use 2 modules, Advanced Charging Controller and Debloater, these don't seem to have any issues staying enabled during an update, but other modules have some issues.
daviddosa said:
Simple answer to that exact question: yes.
Simple solution: after the update finished installing, DO NOT RESTART. Go to Magisk, then click install and select install to inactive slot. To the question, just accept, wait for it to finish, then hit restart. Enjoy your rooted 11.0.10.10.
Note: It's recommended to disable (no need to remove) all modules before starting the version update, then enabling them again, once the update has finished and you have already done the Magisk install.
I only use 2 modules, Advanced Charging Controller and Debloater, these don't seem to have any issues staying enabled during an update, but other modules have some issues.
Click to expand...
Click to collapse
Will this work even taking the smaller OTA update provided through the system, rather than finding the full version and installing it manually?
As soon as you unlock the bootloader, it only offers the full zip instead of the incremental update.
I never tried otherwise, and it's recommended to use the full zip when rooted.
daviddosa said:
As soon as you unlock the bootloader, it only offers the full zip instead of the incremental update.
I never tried otherwise, and it's recommended to use the full zip when rooted.
Click to expand...
Click to collapse
I only ask because the Oxygen Updater doesn't have the newest release, and recently has not had several of the full updates, apparently because OnePlus has not been releasing them. So not sure whether to proceed with just the OTA version.
As far as I know, they're the same. The full zip which you download using Oxygen Updater or by the built-in system updater will work the same, and the method of keeping root is exactly the same. After update, DO NOT restart, install Magisk via app to the inactive slot, then restart.
I got the latest update via the built-in updater, not with the Oxygen Updater app.
What does it mean; install Magisk via app to the inactive slot, then restart ?
ablak44 said:
What does it mean; install Magisk via app to the inactive slot, then restart ?
Click to expand...
Click to collapse
Exactly what it means, if you already have magisk installed, tap install, then when the 4 options come up, tap install to inactive slot. Then reboot
ablak44 said:
What does it mean; install Magisk via app to the inactive slot, then restart ?
Click to expand...
Click to collapse
more understand about oneplus device OTA method if you not.
Nowaday, OP device have many duplicate partitions and its call slot _a and _b.
When you using your phone, its running "active slot", and OTA will install new firmware version to "inactive slot", (to save your phone if any upate fail,..etc).
So after OTA finished, you need to use magisk to setting root (in new partition "inactive slot").
After reboot, inactive slot become active. that 2 slot active alternate after each OTA time.
last time i searched around and got myself in a hard brick situation. please make a guide for this. Noob here
Ashiq.makkar said:
last time i searched around and got myself in a hard brick situation. please make a guide for this. Noob here
Click to expand...
Click to collapse
If you are rooted using Magisk, look here.
Let me know if you need help.
thank you but i tried this and got installation problem when trying to update
For me it worked to do an OTA update with the same version installed.
For example, my phone was rooted to 1.1.7 and I could not update to 1.1.8. So I downloaded 1.1.7 and updated via OTA. After that I could update to 1.1.8 normally. However, the phone must be rooted again.
For the OTA update you have to download the whole OS (https://forum.xda-developers.com/t/...-os-repo-of-nothing-os.4464039/#post-87101175) and then dial *#*#682#*#* in your phone. Now a menu opens in which you can select the OS by browse in the upper right corner. My data has been preserved during the update.
D4yan said:
For me it worked to do an OTA update with the same version installed.
For example, my phone was rooted to 1.1.7 and I could not update to 1.1.8. So I downloaded 1.1.7 and updated via OTA. After that I could update to 1.1.8 normally. However, the phone must be rooted again.
For the OTA update you have to download the whole OS (https://forum.xda-developers.com/t/...-os-repo-of-nothing-os.4464039/#post-87101175) and then dial *#*#682#*#* in your phone. Now a menu opens in which you can select the OS by browse in the upper right corner. My data has been preserved during the update.
Click to expand...
Click to collapse
can you please explain the exact steps?
I'm currently on 1.1.7 rooted with magisk
using some modules and lsposed
Short Guide:
Pretty sure this works across the board with most devices.
If you're doing a OTA and not a manual update:
1. Go into Magisk ~> Uninstall Magisk ~> Restore Images
2. Update via OTA (Do not reboot)
3. Go back into Magisk ~> Install ~> Install to Inactive Slot (After OTA)
4. Reboot
HermitDash said:
Short Guide:
Pretty sure this works across the board with most devices.
If you're doing a OTA and not a manual update:
1. Go into Magisk ~> Uninstall Magisk ~> Restore Images
2. Update via OTA (Do not reboot)
3. Go back into Magisk ~> Install ~> Install to Inactive Slot (After OTA)
4. Reboot
Click to expand...
Click to collapse
tried this. after uninstall magisk by restore images, tried to update via OTA and still getting installation problem
Ashiq.makkar said:
tried this. after uninstall magisk by restore images, tried to update via OTA and still getting installation problem
Click to expand...
Click to collapse
How to manually sideload Nothing OS OTA updates on your Nothing Phone 1
To get the latest Nothing OS update onto your Nothing Phone 1 sooner, you can sideload the update manually. Here's how to do it.
www.xda-developers.com
Manually update yourself to the latest and then reroot.
HermitDash said:
How to manually sideload Nothing OS OTA updates on your Nothing Phone 1
To get the latest Nothing OS update onto your Nothing Phone 1 sooner, you can sideload the update manually. Here's how to do it.
www.xda-developers.com
Manually update yourself to the latest and then reroot.
Click to expand...
Click to collapse
tried manual update and keeps getting different source build is required
I was on 1.1.8 rooted with magisk.
My knowledge isnt the best but my way to update is:
1. Deinstall Magisk.
2. Flash stock boot.img (my version was 1.1.8 so i flash stock boot.img from 1.1.8)
3. Install Update normal over stystem updater
4. Reinstall magsik, done.
I tried it also with restoring magisk and update it over OTA. It worked and it installed, but after I installed Magisk to new slot and restart, it bootlooped 3 times and go back to old version. I think the new Android Versions install the update while restarting. So if you install to new slot with magisk you'll reboot with no OS on the Slot installed. I think the best way is just to uninstall magisk, install update and patch boot img