Hello everyone xda users / developers. I got one problem. I sat on the MiRoom firmware. After that, I wanted to install EvoX. Before installation, I made a backup of MiRoom so that if something comes back to it. Everything worked well. And I decided to return to MiRoom. So I installed backup and rebooted smart. I noticed that the phone was loading for a long time. But the phone turned on. But I could not unlock it. I installed a script that removes the lock password. Everything worked fine but there were bugs. And after that I decided to return to Official Rom Stable. But I could not install it. Since the phone was not detected in Fastboot. The problem is that I can’t even go into Recovery because the smartphone hangs on the Redmi splash screen. I decided to install the firmware via EDL but could not. Since I get the error Only nop and sig tag can be recevied before authentication. How to solve this problem? And is there any way to solve this problem?
Related
Hello. I had gotten this Note 4 phone which had a custom recovery installed on it but the rom seemed to be official, on 5.1
The first thing I did was go to samfirmware and flash a 6.0.1 rom, it went fine, phone was working properly. Then I got greedy and wanted to test a Note 7 ported rom. Flashed TWRP recovery and from within I flashed RamROM http://forum.xda-developers.com/note-4/snapdragon-dev/rom-sm-n910g-ramrom-t3400349 , I downloaded the one from post#2 , the N910F one that my phone is and after it flashed to ROM it simply stopped working. My phone no longer booted, was booting me directly into Download mode with emmc read error. I kept trying to flash the stock rom which I previously flashed and it would fail.
Afterwords I used Smart Switch to reinitialize the phone, writing my phones S/N and that failed as well but at least that made my phone boot into a different recovery where it said to connect to Kies. Once again I used Smart Switch and this time it was successful 100%. My phone even booted into the OS and was working, however, while using it, after 10 minutes the phone restarted into Download mode with emmc read error.
So all in all the phone is functional but it starts to lag and restart. Now I'm kinda stuck again since I've tried to flash the firmware I got from Samfirmware through Odin, it succeded but it just doesn't boot, it goes to Recovery, tries to apply an update and I get an error.
Is there anything I can do? I can't believe the emmc could've broken just from trying to flash that custom rom, especially that afterwards I was even able to boot into the phone.
Thanks for reading and I appreciate the help.
engwee said:
Hello. I had gotten this Note 4 phone which had a custom recovery installed on it but the rom seemed to be official, on 5.1
The first thing I did was go to samfirmware and flash a 6.0.1 rom, it went fine, phone was working properly. Then I got greedy and wanted to test a Note 7 ported rom. Flashed TWRP recovery and from within I flashed RamROM http://forum.xda-developers.com/note-4/snapdragon-dev/rom-sm-n910g-ramrom-t3400349 , I downloaded the one from post#2 , the N910F one that my phone is and after it flashed to ROM it simply stopped working. My phone no longer booted, was booting me directly into Download mode with emmc read error. I kept trying to flash the stock rom which I previously flashed and it would fail.
Afterwords I used Smart Switch to reinitialize the phone, writing my phones S/N and that failed as well but at least that made my phone boot into a different recovery where it said to connect to Kies. Once again I used Smart Switch and this time it was successful 100%. My phone even booted into the OS and was working, however, while using it, after 10 minutes the phone restarted into Download mode with emmc read error.
So all in all the phone is functional but it starts to lag and restart. Now I'm kinda stuck again since I've tried to flash the firmware I got from Samfirmware through Odin, it succeded but it just doesn't boot, it goes to Recovery, tries to apply an update and I get an error.
Is there anything I can do? I can't believe the emmc could've broken just from trying to flash that custom rom, especially that afterwards I was even able to boot into the phone.
Thanks for reading and I appreciate the help.
Click to expand...
Click to collapse
read this - http://forum.xda-developers.com/note-4/help/note-4-issues-t3453048
there are links to more threads related to your issue.
Short version though:
it is dying. install wake lock application, add it to start up and set settings to #4.
accept the fact that your phone will eat the battery faster and one day WILL die completely
Thanks for your response. Regarding the Wake lock application, I'm starting to look into it, I asume I'll have to be rooted. I'll try to recover it again using Smart Switch and then I can only hope I can install TWRP and still have it functional.
Previously when I was able to get it working with Smart Switch, entering the recovery messed everything up. It said it was applying an update and that got stuck.
engwee said:
Thanks for your response. Regarding the Wake lock application, I'm starting to look into it, I asume I'll have to be rooted. I'll try to recover it again using Smart Switch and then I can only hope I can install TWRP and still have it functional.
Previously when I was able to get it working with Smart Switch, entering the recovery messed everything up. It said it was applying an update and that got stuck.
Click to expand...
Click to collapse
no need to be rooted, just download, install and set it to autostart
I'll try it if I somehow manage to get the phone working again, Smart Switch just fails now midway through.
golden_m said:
no need to be rooted, just download, install and set it to autostart
Click to expand...
Click to collapse
Is this the app you're talking about? https://play.google.com/store/apps/details?id=eu.thedarken.wl&hl=en
What exactly does it do?
I managed to restore it eventually with Smart Switch, it took quite a few tries, then I switched to my Macbook when I saw the app was available on it too and the 3rd try succeded. I only did it because I saw the 2nd try had the % much higher than the first.
engwee said:
Is this the app you're talking about? https://play.google.com/store/apps/details?id=eu.thedarken.wl&hl=en
What exactly does it do?
I managed to restore it eventually with Smart Switch, it took quite a few tries, then I switched to my Macbook when I saw the app was available on it too and the 3rd try succeded. I only did it because I saw the 2nd try had the % much higher than the first.
Click to expand...
Click to collapse
yes, that is the app.
i've read it does not allow your phone to go to sleep mode.
drains the battery faster, but this is the only way to keep note 4 working without swapping its motherboard...
I have a question, my gf recently bought a note 4 and we may swap our phones and if we do, i'll flash CM and tinker with it because i find this phone very interesting, just a question, does this bug affect the N910C (exynos) model? Do i have something to worry about? Because the phone is warrianty protected and if it's the case, i don't want to break it. I hope someone will shed some light on this
I was using the Cyanogen 13 ROM for about 20 days it was working fine, however it did not load off, so far so good. When these days he stopped loading and kept rebooting alone on the boot screen of note 4 910C. I thought it was a problem in rom I restored my nano backup complete restoration however it did not work either, I tried to flash a rom via twrp the complete installation however it did not work too ... I tried other two rom custom too and it did not work. That's when I decided to use Odin I downloaded the original ROM and did the flash. Flash completed successfully, when the cell phone was to start its first boot. I have the message on the phone saying ... Install DRK files first. Does anyone know how I can solve this problem. I took in the technical assistance of my city after more than a week of waiting the boy said that the phone has no concert.
Hey!
So I got the 9.0 pie on my Xiaomi MiA1 and I decided to test it and I was pretty disappointed, so I decided to try to revert back to 8.1 oreo. I unlocked the phone, fastbooted twrp, wiped the data and tried using miflash to install the rom and also tried flashing it through twrp. I have been having this problem for 2 days now, i successfully install the OS but then I get stuck in a boot loop and now I can't even get past the android one logo and it keeps loading there. I didn't do a backup, I regret that. I can't remember how many times I already try flashing different roms but nothing really seems to work, in fact seems like it's getting worse since before it would actually boot until it asked me to put my SIM card PIN but then it would reboot constantly, but as I said before now it wont get past android one screen. Also maybe its worth mentioning that i try using lazyflasher already a few times and that there was a time that it actually worked but it got automatically updated to 9.0 pie again so back to the start and, as i thought that i knew what i was doing, i just tried redoing what i did before to install 8.1 again and disable automatic updates before connecting to the internet. I can go to fastboot mode and I can use twrp doesn't seem like I have a problem there, any help is appreciated!
maybe just can let 9.0 install , looks like is the only way that u have for a dayle phone
Mig979 said:
Hey!
So I got the 9.0 pie on my Xiaomi MiA1 and I decided to test it and I was pretty disappointed, so I decided to try to revert back to 8.1 oreo. I unlocked the phone, fastbooted twrp, wiped the data and tried using miflash to install the rom and also tried flashing it through twrp. I have been having this problem for 2 days now, i successfully install the OS but then I get stuck in a boot loop and now I can't even get past the android one logo and it keeps loading there. I didn't do a backup, I regret that. I can't remember how many times I already try flashing different roms but nothing really seems to work, in fact seems like it's getting worse since before it would actually boot until it asked me to put my SIM card PIN but then it would reboot constantly, but as I said before now it wont get past android one screen. Also maybe its worth mentioning that i try using lazyflasher already a few times and that there was a time that it actually worked but it got automatically updated to 9.0 pie again so back to the start and, as i thought that i knew what i was doing, i just tried redoing what i did before to install 8.1 again and disable automatic updates before connecting to the internet. I can go to fastboot mode and I can use twrp doesn't seem like I have a problem there, any help is appreciated!
Click to expand...
Click to collapse
You can install stock Pie via Mi Flash tool.
Sent from my Mi A1 using XDA Labs
I i had to reflash the firmware the correct one TB-X104F_S000024_180930_ROW_DCC. Anyway it wasn't booting at all before i flashed. Now it boots, shows the logo etc and constantly says Encryption unsuccessful!, so i reset it and factory reset it but nothing changes.
I have no idea where else to go, bootloader is locked and all i can do is flash the firmware. Would there be a way to remove this from the files within the firmware?. It seems like android is there in the background but i can't get away from that encryption unsuccessful screen!
Sorry if none of this makes sense.
Yo. I got the same tablet bro. Been trying to figure out a custom recovery for her. A stock ROM would be great to have and I haven't been able to find one anywhere. Might I inquire as to where you found yours? It would be a huge relief to know I can fix it if I break it lol.
encryption
If you download the Lenovo MOTO smart assistant from Lenovo support it has a resque option. I also used that to root my tb-x104f. It downloads the original everything and if you take the boot image from the file it downloads and replace it in one that has been modified from magisk it will rescue it and you will have root also thatd what I did with mine
same problem here, reflashed with stock rom. and not resloved
frankieuk said:
I i had to reflash the firmware the correct one TB-X104F_S000024_180930_ROW_DCC. Anyway it wasn't booting at all before i flashed. Now it boots, shows the logo etc and constantly says Encryption unsuccessful!, so i reset it and factory reset it but nothing changes.
I have no idea where else to go, bootloader is locked and all i can do is flash the firmware. Would there be a way to remove this from the files within the firmware?. It seems like android is there in the background but i can't get away from that encryption unsuccessful screen!
Sorry if none of this makes sense.
Click to expand...
Click to collapse
Did you fix this issue?
I am having the same problem.
Thanks
Same problem here (my error reads "Decryption unsuccesful", but I think it's the same as yours).
After a few tries, I believe that it is a problem with the internet connection. After the factory reset, if I skip the wifi connection step, it starts normally. And it is completely usable. I can load pdf documents or apks by the usb from a computer and it runs correctly. But whenever I try to set the wifi connection, it updates something and it causes the tablet that the next time I turn it off, I find the error on the picture when turning on. It asks for a password and no matter which password you enter, then it delivers this message.
In resume, right now it is a completely functional tablet if you NEVER connect it to the internet and load anything you need via usb or bluetooth.
I tried to reset it with Lenovo Smart Assistant, but the result is the same.
I am looking for custom roms to try if it's something about the stock rom, but I haven't found any. Can anyone reccomend me a rom for Lenovo E10 X104F 2GB?
Solution: (Worked for me)
Format Data as F2FS in TWRP. (Advanced Wipe)
Then reboot and wait.
Hello everyone xda users / developers. I got one problem. I sat on the MiRoom firmware. After that, I wanted to install EvoX. Before installation, I made a backup of MiRoom so that if something comes back to it. Everything worked well. And I decided to return to MiRoom. So I installed backup and rebooted smart. I noticed that the phone was loading for a long time. But the phone turned on. But I could not unlock it. I installed a script that removes the lock password. Everything worked fine but there were bugs. And after that I decided to return to Official Rom Stable. But I could not install it. Since the phone was not detected in Fastboot. The problem is that I can’t even go into Recovery because the smartphone hangs on the Redmi splash screen. I decided to install the firmware via EDL but could not. Since I get the error Only nop and sig tag can be recevied before authentication. How to solve this problem? And is there any way to solve this problem?
Thread closed @foxyoff this is a duplicate of https://forum.xda-developers.com/showthread.php?p=83047457#post83047457
Please post your question only once.
strongst
Forum Moderator