Hello everyone.
SORRY FOR MY ENGLISH!!
I recently purchased an Android PX5 car stereo (MTCE_MX from Witson) the 4GB version with Android 8 for my Fiat Doblò 2012.
Exactly this car radio: LINK WITSON
My problem is : CANBUS DECODER (link)
I connected the cables, etc. .. by default, everything works. The fact is that the canbus does not give me the information I would like.
When I open the door I see an image that is the same as this LINK, but nothing else.
Looking for solutions on the internet, I saw that many have an app installed, such as "Vehicle (link)" or "Car Info" where you can see a lot of information (like this LINK image)
Is it an application problem or is my car the problem?
Thanks a lot
im missing these apps as well. i have mercedes canbus
@GianniDarkos is the canbus box the one you are using? Wondering as I would expect VW-SS-03 would indicate SimpleSoft and Volkswagen but not Fiat. Would expect if VW-SS-03 should be the canbus decoder version 01 VW (Simple) should be the right canbus setting. Have you checked canbus box settings inside Factory settings? Which one is selected? Vehicle link might not show up for all canbus boxes.
Hi all ,
can anyone give a hand in this problem :
I just bought an android head for peugeot 307 year (2007) canbus version , comes with Raise canbus
version PSA-RZ-15
sw: V0103
hw: VW-NC03
works fine and read car info but suddenly after changes some car models protocols, it disconnected, even if I choose the previous car model.
in System Info. gives the canbus model : (Peugeot 408.disconnected) !!!
I did a factory reset and change the canbus model many times without any success.
Now every things related to canbus is not working (Wheel buttons ,Fuel info ,Reverse Radar ,etc.)
what should I do?
Thanks in advance.
i have same problem in 2022 with peguet 301 model 2015 and use hiworld can bus
i have the same problem with hiworld canbus it didnot work every time mostly disconnected
Hi Guys
Hoping for some information
I have a android headunit called a T5 system basically it's running 8.1 api 27 bit falsely claims 9.0
It's a type of mtk8227 headunit, the problem I'm facing is that I have a canbus specific for my car ( TATA Nexon) from Hiworld but under the canbus settings my car model is Not visible, I guess I need sl.e update to the canbus settings for it to show my car, as of now choosing a random other car is a hit or miss on OEM functions
Any help is much appreciated
Did you find any solution? I am looking for the same for my Tata Hexa. The canbus decoder unit is the same
Not an MTCx device, requested mod moves to Android head unit forum where this post might be seen.
Need more info to help
Hi , where did you buy the canvas? What is your Nexon model year ? You can set it in factory settings. Is that hiworld canbus ?
Hi All,
I'm bit new to the world of Android Head Unit who recently purchased a PX5 Android 10 head unit for my Peugeot 407.
After installation everything works fine expect for one problem. WiFi doesn't work.
If I turn ON the WiFi, it finds my network, connects to it, and then immediately the WiFi turns OFF. It keeps turning ON and OFF in loop.
So reached out to my seller who provided a firmware file using which I upgraded my unit successfully. But no luck. WiFi still has the same problem. It keeps turning ON and OFF in continuous loop.
Head Unit Specifications
Car: Peugeot 407
Unit: PX5
CPU: Octa-core Cortex-A53 @1.5G
Memory: 4GB
Storage: 64GB
MCU Version: MTCE_MX2_V3.60_1
Kernel Version: 4.19.111+
Build Number: rk368-userdebug 10 [email protected] eng.hct2.20200909.085823
Bluetooth Module: WQ_RF210 (as pre-selected in the Factory settings in the head unit)
I've attached a video of my symptoms as well. Please can you have a look and advise / point me in the right direction to fix this WiFi problem.
I spent time tracking down the seller for firmware update because I'm not sure how to identify the specific model / manufacturer etc of the unit.
Any advise on how to identify the finer details associated with the Head Unit Model would also be very helpful.
Thank you.
livewyr said:
Hi All,
I'm bit new to the world of Android Head Unit who recently purchased a PX5 Android 10 head unit for my Peugeot 407.
After installation everything works fine expect for one problem. WiFi doesn't work.
If I turn ON the WiFi, it finds my network, connects to it, and then immediately the WiFi turns OFF. It keeps turning ON and OFF in loop.
So reached out to my seller who provided a firmware file using which I upgraded my unit successfully. But no luck. WiFi still has the same problem. It keeps turning ON and OFF in continuous loop.
Head Unit Specifications
Car: Peugeot 407
Unit: PX5
CPU: Octa-core Cortex-A53 @1.5G
Memory: 4GB
Storage: 64GB
MCU Version: MTCE_MX2_V3.60_1
Kernel Version: 4.19.111+
Build Number: rk368-userdebug 10 [email protected] eng.hct2.20200909.085823
Bluetooth Module: WQ_RF210 (as pre-selected in the Factory settings in the head unit)
I've attached a video of my symptoms as well. Please can you have a look and advise / point me in the right direction to fix this WiFi problem.
I spent time tracking down the seller for firmware update because I'm not sure how to identify the specific model / manufacturer etc of the unit.
Any advise on how to identify the finer details associated with the Head Unit Model would also be very helpful.
Thank you.
Click to expand...
Click to collapse
Did you check the wifi antenna?
I have a 407 - (2007) - does your head unit allow for aircon and heating/ventilation controls and all the canbus functions?
my orange dispaly is failing so thought I'd install one of these instead
Do you have a link for the one you bought? I've been looking for octacore - most are quad
Thanks
Found some interesting info here
[SOLVED] I can’t turn ON my Wi-Fi... Need help
I have update my mtce px3 Android 7.1 MTCE with a px5 Android 6 and charged malaysk rom based on Android 8.0... but afther that i can’t turn ON my Wi-Fi. Bluetooth working perfect... all the thing working good.. only Wi-Fi don’t wont to turn on...
forum.xda-developers.com
maybe unplug any usb's you have, and/or request a firmware update from vendor
snailer said:
Did you check the wifi antenna?
I have a 407 - (2007) - does your head unit allow for aircon and heating/ventilation controls and all the canbus functions?
my orange dispaly is failing so thought I'd install one of these instead
Do you have a link for the one you bought? I've been looking for octacore - most are quad
Thanks
Found some interesting info here
[SOLVED] I can’t turn ON my Wi-Fi... Need help
I have update my mtce px3 Android 7.1 MTCE with a px5 Android 6 and charged malaysk rom based on Android 8.0... but afther that i can’t turn ON my Wi-Fi. Bluetooth working perfect... all the thing working good.. only Wi-Fi don’t wont to turn on...
forum.xda-developers.com
maybe unplug any usb's you have, and/or request a firmware update from vendor
Click to expand...
Click to collapse
I can't find my exact seller listing but below link is a similar eBay listing for the same model I have got.
Peugeot 407 Android 10 PX5 4-64
Yes, it integrates seamlessly with canbus / climate control etc. It comes with a canbus connector. There's an option to connect reverse camera if you want to. But you have to buy the reverse camera separately. Other than that there's a GPS antenna, built in and extra microphones for phone calls, memory card slot, USB slots etc.
I wouldn't recommend any sellers for this kind of after market head units as they are all sold / shipped by overseas / international sellers. There's always a risk with this type purchases. So proceed with caution. If you end up getting a good unit, the risk is well rewarded. Your Pegueot gets a major upgrade.
All the best!
Thanks!
I've been looking at these ones.
Still undecided
Might just get a new mfd screen & keep using my phone!
plamenangelov said:
I have a problem with my auto daylight, my old navigation system was Rneg and all work fine. When start engine auto daylight in on but when install new Witson auto daylight stop work, i must start it manuali on setting via Witson unit. I have menu auto daylight runigh light when touch it, light is on but button still unactive.
Click to expand...
Click to collapse
Maverickky said:
I have the same problem, any solution?
Click to expand...
Click to collapse
livewyr said:
Hi All,
I'm bit new to the world of Android Head Unit who recently purchased a PX5 Android 10 head unit for my Peugeot 407.
After installation everything works fine expect for one problem. WiFi doesn't work.
If I turn ON the WiFi, it finds my network, connects to it, and then immediately the WiFi turns OFF. It keeps turning ON and OFF in loop.
So reached out to my seller who provided a firmware file using which I upgraded my unit successfully. But no luck. WiFi still has the same problem. It keeps turning ON and OFF in continuous loop.
Head Unit Specifications
Car: Peugeot 407
Unit: PX5
CPU: Octa-core Cortex-A53 @1.5G
Memory: 4GB
Storage: 64GB
MCU Version: MTCE_MX2_V3.60_1
Kernel Version: 4.19.111+
Build Number: rk368-userdebug 10 [email protected] eng.hct2.20200909.085823
Bluetooth Module: WQ_RF210 (as pre-selected in the Factory settings in the head unit)
I've attached a video of my symptoms as well. Please can you have a look and advise / point me in the right direction to fix this WiFi problem.
I spent time tracking down the seller for firmware update because I'm not sure how to identify the specific model / manufacturer etc of the unit.
Any advise on how to identify the finer details associated with the Head Unit Model would also be very helpful.
Thank you.
Click to expand...
Click to collapse
Have you guys found any solutions to your canbus problems with Peugeot 407? I lost my automatic headlights / daylights which I'd love to have back. Have you encountered and solved other issues with Android head units?
I can't either enable some car functions from car app from head unit (automatic lights, rear wiper, parking radar etc.). Can you see the outside / inside temperatures of the car somewhere? My A/C works somehow (responses like it should to physical buttons, but I bet it has mechanical faults instead communication problems with head unit).
gratnak said:
Have you guys found any solutions to your canbus problems with Peugeot 407? I lost my automatic headlights / daylights which I'd love to have back. Have you encountered and solved other issues with Android head units?
I can't either enable some car functions from car app from head unit (automatic lights, rear wiper, parking radar etc.). Can you see the outside / inside temperatures of the car somewhere? My A/C works somehow (responses like it should to physical buttons, but I bet it has mechanical faults instead communication problems with head unit).
Click to expand...
Click to collapse
What did the reseller suggest when contacted for support.
livewyr said:
Hi All,
I'm bit new to the world of Android Head Unit who recently purchased a PX5 Android 10 head unit for my Peugeot 407.
After installation everything works fine expect for one problem. WiFi doesn't work.
If I turn ON the WiFi, it finds my network, connects to it, and then immediately the WiFi turns OFF. It keeps turning ON and OFF in loop.
So reached out to my seller who provided a firmware file using which I upgraded my unit successfully. But no luck. WiFi still has the same problem. It keeps turning ON and OFF in continuous loop.
Head Unit Specifications
Car: Peugeot 407
Unit: PX5
CPU: Octa-core Cortex-A53 @1.5G
Memory: 4GB
Storage: 64GB
MCU Version: MTCE_MX2_V3.60_1
Kernel Version: 4.19.111+
Build Number: rk368-userdebug 10 [email protected] eng.hct2.20200909.085823
Bluetooth Module: WQ_RF210 (as pre-selected in the Factory settings in the head unit)
I've attached a video of my symptoms as well. Please can you have a look and advise / point me in the right direction to fix this WiFi problem.
I spent time tracking down the seller for firmware update because I'm not sure how to identify the specific model / manufacturer etc of the unit.
Any advise on how to identify the finer details associated with the Head Unit Model would also be very helpful.
Thank you.
Click to expand...
Click to collapse
Hello there,
See this workaround.
Custom ROMs such as @Hal9k_ 's Mod V5 have workarounds for this under Mod settings. In that ROM, go to Mod settings, select "Hardware settings" and toggle on the "Reset USB devices when booting or waking up".
Hello ! is it possible that canbus boxes interfere with my car directly ?
the other day my car turned lights on and off repeatly and without any action (lights are automatic)
It’s an opel Astra J 2010 and my radio HU is an android 9 inch podofo, with raise canbus.
thanks
Yes it is. Posting the made up brand name and made up model name is usually meaningless without also posting Android system information including MCU version